NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Sun May 04, 2025 5:11 pm

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
webdad
PostPosted: Fri Mar 23, 2007 9:37 am 
Offline

Joined: Wed Mar 02, 2005 9:27 am
Posts: 23
I've been having a problem with various html files showing up empty over time. My NAS box continues to function without issue, but whenever I access the HTML pages, they start showing up empty over time.

Here is an example. I rebooted on 20 March and immediately after the reboot, the Server Message log looked like this.

20 Mar Server Message Log

This morning I checked the server message log and it now looks like this:

23 Mar Server Message Log

I just checked the General tab and the System disk shows only 4.0k free (it showed over 2MB free a couple days ago). I can't see any obvious place where the space is going.

I do have a samsung drive in the box and I had an issue with SMART monitoring filling up the system drive but that showed up in the server message log and I subsequently turned off SMART for that drive.

Any thoughts?
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Sun Mar 25, 2007 8:42 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
I'm not sure what I'm looking at. Can you please post the content directly?
Top
 Profile  
 
webdad
 Post subject:
PostPosted: Tue Mar 27, 2007 8:27 pm 
Offline

Joined: Wed Mar 02, 2005 9:27 am
Posts: 23
Sorry. In continuing to monitor the situation, the best I can tell is that the system disk gradually fills up with something and eventually none of the html pages have any room to be written/refreshed.

The two copies of the system log basically show a fresh copy, right after the reboot and then a truncated copy that has the exact same content, except for the last couple dozen lines.

For what it is worth, my server storage page now looks like this:

General:
This page provides a summary of all available storage volumes. Storage capacities for local as well as currently mounted remote volumes are displayed. Disk temperature is displayed only for local disks that support S.M.A.R.T. and export the temperature attribute. Specific information pertaining to each individual storage disk can be viewed by clicking on the associated link below.





DISK TOTAL <TD ALIGN="CENTER" B



Here is the fresh copy of the system log:

Mar 20 16:39:16 syslog.info syslogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
Mar 20 16:39:16 daemon.info init: ^MStarting pid 2504, console /dev/null: '/sbin/klogd'
Mar 20 16:39:16 user.notice kernel: klogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
Mar 20 16:39:16 user.warn kernel: Linux version 2.4.33.NASLite (root@TZT) (gcc version 3.3.6) #1 Tue Aug 15 01:08:13 UTC 2006
Mar 20 16:39:16 user.info kernel: BIOS-provided physical RAM map:
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 0000000000100000 - 00000000040fd800 (usable)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000040fd800 - 00000000040ff800 (ACPI data)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000040ffc00 - 0000000008000000 (usable)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
Mar 20 16:39:16 user.notice kernel: 128MB LOWMEM available.
Mar 20 16:39:16 user.warn kernel: On node 0 totalpages: 32768
Mar 20 16:39:16 user.warn kernel: zone(0): 4096 pages.
Mar 20 16:39:16 user.warn kernel: zone(1): 28672 pages.
Mar 20 16:39:16 user.warn kernel: zone(2): 0 pages.
Mar 20 16:39:16 user.notice kernel: ACPI disabled because your bios is from 98 and too old
Mar 20 16:39:16 user.notice kernel: You can enable it with acpi=force
Mar 20 16:39:16 user.warn kernel: Kernel command line: root=/dev/ram0 rw
Mar 20 16:39:16 user.info kernel: Initializing CPU#0
Mar 20 16:39:16 user.warn kernel: Detected 397.958 MHz processor.
Mar 20 16:39:16 user.warn kernel: Console: colour VGA+ 80x25
Mar 20 16:39:16 user.warn kernel: Calibrating delay loop. 794.62 BogoMIPS
Mar 20 16:39:16 user.info kernel: Memory: 123928k/131072k available (2198k kernel code, 6744k reserved, 734k data, 536k init, 0k highmem)
Mar 20 16:39:16 user.info kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Mar 20 16:39:16 user.info kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mar 20 16:39:16 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 20 16:39:16 user.info kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Mar 20 16:39:16 user.warn kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 20 16:39:16 user.info kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 20 16:39:16 user.info kernel: CPU: L2 cache: 512K
Mar 20 16:39:16 user.debug kernel: CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
Mar 20 16:39:16 user.debug kernel: CPU: Common caps: 0183f9ff 00000000 00000000 00000000
Mar 20 16:39:16 user.warn kernel: CPU: Intel Pentium II (Deschutes) stepping 02
Mar 20 16:39:16 user.info kernel: Enabling fast FPU save and restore. done.
Mar 20 16:39:16 user.info kernel: Checking 'hlt' instruction. OK.
Mar 20 16:39:16 user.info kernel: Checking for popad bug. OK.
Mar 20 16:39:16 user.warn kernel: POSIX conformance testing by UNIFIX
Mar 20 16:39:16 user.info kernel: ACPI: Subsystem revision 20040326
Mar 20 16:39:16 user.info kernel: ACPI: Interpreter disabled.
Mar 20 16:39:16 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd983, last bus=1
Mar 20 16:39:16 user.info kernel: PCI: Using configuration type 1
Mar 20 16:39:16 user.info kernel: PCI: Probing PCI hardware
Mar 20 16:39:16 user.warn kernel: PCI: Probing PCI hardware (bus 00)
Mar 20 16:39:16 user.info kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Mar 20 16:39:16 user.info kernel: Limiting direct PCI/PCI transfers.
Mar 20 16:39:16 user.info kernel: Linux NET4.0 for Linux 2.4
Mar 20 16:39:16 user.info kernel: Based upon Swansea University Computer Society NET3.039
Mar 20 16:39:16 user.warn kernel: Initializing RT netlink socket
Mar 20 16:39:16 user.warn kernel: Starting kswapd
Mar 20 16:39:16 user.info kernel: Journalled Block Device driver loaded
Mar 20 16:39:16 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Mar 20 16:39:16 user.info kernel: devfs: boot_options: 0x1
Mar 20 16:39:16 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 20 16:39:16 user.warn kernel: pty: 256 Unix98 ptys configured
Mar 20 16:39:16 user.info kernel: Real Time Clock Driver v1.10f
Mar 20 16:39:16 user.info kernel: Floppy drive(s): fd0 is 1.44M
Mar 20 16:39:16 user.info kernel: FDC 0 is a post-1991 82077
Mar 20 16:39:16 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Mar 20 16:39:16 user.info kernel: loop: loaded (max 8 devices)
Mar 20 16:39:16 user.info kernel: Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
Mar 20 16:39:16 user.info kernel: Copyright (c) 1999-2004 Intel Corporation.
Mar 20 16:39:16 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Mar 20 16:39:16 user.warn kernel: FW Version=$Version$
Mar 20 16:39:16 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Mar 20 16:39:16 user.info kernel: ThunderLAN driver v1.15
Mar 20 16:39:16 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Mar 20 16:39:16 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Mar 20 16:39:16 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Mar 20 16:39:16 user.warn kernel: sk98lin: No adapter found.
Mar 20 16:39:16 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Mar 20 16:39:16 user.info kernel: 8139too Fast Ethernet driver 0.9.26
Mar 20 16:39:16 user.info kernel: PCI: Found IRQ 10 for device 00:0d.0
Mar 20 16:39:16 user.info kernel: eth0: RealTek RTL8139 at 0xc8800000, 00:50:ba:b5:1e:0e, IRQ 10
Mar 20 16:39:16 user.debug kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Mar 20 16:39:16 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Mar 20 16:39:16 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 20 16:39:16 user.info kernel: PIIX4: IDE controller at PCI slot 00:07.1
Mar 20 16:39:16 user.info kernel: PIIX4: chipset revision 1
Mar 20 16:39:16 user.info kernel: PIIX4: not 100% native mode: will probe irqs later
Mar 20 16:39:16 user.info kernel: ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:pio
Mar 20 16:39:16 user.info kernel: ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
Mar 20 16:39:16 user.warn kernel: hda: SAMSUNG HD300LD, ATA DISK drive
Mar 20 16:39:16 user.warn kernel: hdb: WDC WD2500JB-00EVA0, ATA DISK drive
Mar 20 16:39:16 user.warn kernel: hdc: ST3300831A, ATA DISK drive
Mar 20 16:39:16 user.warn kernel: e
Mar 20 16:39:16 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 20 16:39:16 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 20 16:39:16 user.warn kernel: hda: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hda: host protected area => 1
Mar 20 16:39:16 user.info kernel: hda: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(33)
Mar 20 16:39:16 user.warn kernel: hdb: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hdb: host protected area => 1
Mar 20 16:39:16 user.info kernel: hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
Mar 20 16:39:16 user.warn kernel: hdc: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hdc: host protected area => 1
Mar 20 16:39:16 user.info kernel: hdc: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(33)
Mar 20 16:39:16 user.warn kernel: hdd: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hdd: host protected area => 1
Mar 20 16:39:16 user.info kernel: hdd: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
Mar 20 16:39:16 user.info kernel: Partition check:
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus1/target0/lun0: p1
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus1/target1/lun0: p1
Mar 20 16:39:16 user.info kernel: SCSI subsystem driver Revision: 1.00
Mar 20 16:39:16 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Mar 20 16:39:16 user.info kernel: Detecting Adaptec I2O RAID controllers.
Mar 20 16:39:16 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 15 2006 01:22:52)
Mar 20 16:39:16 user.warn kernel: scsi: Detection failed (no card)
Mar 20 16:39:16 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Mar 20 16:39:16 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Mar 20 16:39:16 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Mar 20 16:39:16 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Mar 20 16:39:16 user.warn kernel: 3w-xxxx: No cards found.
Mar 20 16:39:16 user.debug kernel: libata version 1.20 loaded.
Mar 20 16:39:16 user.info kernel: raw1394: /dev/raw1394 device initialized
Mar 20 16:39:16 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Mar 20 16:39:16 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Mar 20 16:39:16 user.info kernel: usb.c: registered new driver usbdevfs
Mar 20 16:39:16 user.info kernel: usb.c: registered new driver hub
Mar 20 16:39:16 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Mar 20 16:39:16 user.info kernel: PCI: Found IRQ 9 for device 00:07.2
Mar 20 16:39:16 user.info kernel: host/uhci.c: USB UHCI at I/O 0x1440, IRQ 9
Mar 20 16:39:16 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 20 16:39:16 user.info kernel: hub.c: USB hub found
Mar 20 16:39:16 user.info kernel: hub.c: 2 ports detected
Mar 20 16:39:16 user.info kernel: Initializing USB Mass Storage driver.
Mar 20 16:39:16 user.info kernel: usb.c: registered new driver usb-storage
Mar 20 16:39:16 user.info kernel: USB Mass Storage support registered.
Mar 20 16:39:16 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 20 16:39:16 user.info kernel: IP Protocols: ICMP, UDP, TCP
Mar 20 16:39:16 user.info kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Mar 20 16:39:16 user.info kernel: TCP: Hash tables configured (established 8192 bind 16384)
Mar 20 16:39:16 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 20 16:39:16 user.notice kernel: RAMDISK: NASLite file system found at block 0
Mar 20 16:39:16 user.warn kernel: .<6>hub.c: new USB device 00:07.2-1, assigned address 2
Mar 20 16:39:16 user.warn kernel: <6>scsi1 : SCSI emulation for USB Mass Storage devices
Mar 20 16:39:16 user.warn kernel: Vendor: MicroAdv Model: QuickiDrive64M Rev: 2.00
Mar 20 16:39:16 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 20 16:39:16 user.warn kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Mar 20 16:39:16 user.warn kernel: .SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
Mar 20 16:39:16 user.warn kernel: sda: Write Protect is off
Mar 20 16:39:16 user.info kernel: /dev/scsi/host1/bus0/target0/lun0:. unknown partition table
Mar 20 16:39:16 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Mar 20 16:39:16 user.debug kernel: USB Mass Storage device found at 2
Mar 20 16:39:16 user.warn kernel: .<6>Freeing initrd memory: 1601k freed
Mar 20 16:39:16 user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
Mar 20 16:39:16 user.warn kernel: VFS: Mounted root (ext2 filesystem).
Mar 20 16:39:16 user.info kernel: Mounted devfs on /dev
Mar 20 16:39:16 user.info kernel: Freeing unused kernel memory: 536k freed
Mar 20 16:39:16 user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Mar 20 16:39:16 user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Mar 20 16:39:16 user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Mar 20 16:39:16 user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Mar 20 16:39:16 user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Mar 20 16:39:16 user.info kernel: kjournald starting. Commit interval 5 seconds
Mar 20 16:39:16 user.info kernel: 3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Mar 20 16:39:16 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 20 16:39:16 user.info kernel: kjournald starting. Commit interval 5 seconds
Mar 20 16:39:16 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Mar 20 16:39:16 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 20 16:39:16 user.info kernel: kjournald starting. Commit interval 5 seconds
Mar 20 16:39:16 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Mar 20 16:39:16 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Mar 20 16:39:16 user.info kernel: kjournald starting. Commit interval 5 seconds
Mar 20 16:39:16 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal
Mar 20 16:39:16 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.



Here is the truncated copy:

Mar 20 16:39:16 syslog.info syslogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
Mar 20 16:39:16 daemon.info init: ^MStarting pid 2504, console /dev/null: '/sbin/klogd'
Mar 20 16:39:16 user.notice kernel: klogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
Mar 20 16:39:16 user.warn kernel: Linux version 2.4.33.NASLite (root@TZT) (gcc version 3.3.6) #1 Tue Aug 15 01:08:13 UTC 2006
Mar 20 16:39:16 user.info kernel: BIOS-provided physical RAM map:
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 0000000000100000 - 00000000040fd800 (usable)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000040fd800 - 00000000040ff800 (ACPI data)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000040ffc00 - 0000000008000000 (usable)
Mar 20 16:39:16 user.warn kernel: BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
Mar 20 16:39:16 user.notice kernel: 128MB LOWMEM available.
Mar 20 16:39:16 user.warn kernel: On node 0 totalpages: 32768
Mar 20 16:39:16 user.warn kernel: zone(0): 4096 pages.
Mar 20 16:39:16 user.warn kernel: zone(1): 28672 pages.
Mar 20 16:39:16 user.warn kernel: zone(2): 0 pages.
Mar 20 16:39:16 user.notice kernel: ACPI disabled because your bios is from 98 and too old
Mar 20 16:39:16 user.notice kernel: You can enable it with acpi=force
Mar 20 16:39:16 user.warn kernel: Kernel command line: root=/dev/ram0 rw
Mar 20 16:39:16 user.info kernel: Initializing CPU#0
Mar 20 16:39:16 user.warn kernel: Detected 397.958 MHz processor.
Mar 20 16:39:16 user.warn kernel: Console: colour VGA+ 80x25
Mar 20 16:39:16 user.warn kernel: Calibrating delay loop. 794.62 BogoMIPS
Mar 20 16:39:16 user.info kernel: Memory: 123928k/131072k available (2198k kernel code, 6744k reserved, 734k data, 536k init, 0k highmem)
Mar 20 16:39:16 user.info kernel: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Mar 20 16:39:16 user.info kernel: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mar 20 16:39:16 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 20 16:39:16 user.info kernel: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Mar 20 16:39:16 user.warn kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 20 16:39:16 user.info kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 20 16:39:16 user.info kernel: CPU: L2 cache: 512K
Mar 20 16:39:16 user.debug kernel: CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
Mar 20 16:39:16 user.debug kernel: CPU: Common caps: 0183f9ff 00000000 00000000 00000000
Mar 20 16:39:16 user.warn kernel: CPU: Intel Pentium II (Deschutes) stepping 02
Mar 20 16:39:16 user.info kernel: Enabling fast FPU save and restore. done.
Mar 20 16:39:16 user.info kernel: Checking 'hlt' instruction. OK.
Mar 20 16:39:16 user.info kernel: Checking for popad bug. OK.
Mar 20 16:39:16 user.warn kernel: POSIX conformance testing by UNIFIX
Mar 20 16:39:16 user.info kernel: ACPI: Subsystem revision 20040326
Mar 20 16:39:16 user.info kernel: ACPI: Interpreter disabled.
Mar 20 16:39:16 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd983, last bus=1
Mar 20 16:39:16 user.info kernel: PCI: Using configuration type 1
Mar 20 16:39:16 user.info kernel: PCI: Probing PCI hardware
Mar 20 16:39:16 user.warn kernel: PCI: Probing PCI hardware (bus 00)
Mar 20 16:39:16 user.info kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Mar 20 16:39:16 user.info kernel: Limiting direct PCI/PCI transfers.
Mar 20 16:39:16 user.info kernel: Linux NET4.0 for Linux 2.4
Mar 20 16:39:16 user.info kernel: Based upon Swansea University Computer Society NET3.039
Mar 20 16:39:16 user.warn kernel: Initializing RT netlink socket
Mar 20 16:39:16 user.warn kernel: Starting kswapd
Mar 20 16:39:16 user.info kernel: Journalled Block Device driver loaded
Mar 20 16:39:16 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Mar 20 16:39:16 user.info kernel: devfs: boot_options: 0x1
Mar 20 16:39:16 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 20 16:39:16 user.warn kernel: pty: 256 Unix98 ptys configured
Mar 20 16:39:16 user.info kernel: Real Time Clock Driver v1.10f
Mar 20 16:39:16 user.info kernel: Floppy drive(s): fd0 is 1.44M
Mar 20 16:39:16 user.info kernel: FDC 0 is a post-1991 82077
Mar 20 16:39:16 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Mar 20 16:39:16 user.info kernel: loop: loaded (max 8 devices)
Mar 20 16:39:16 user.info kernel: Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
Mar 20 16:39:16 user.info kernel: Copyright (c) 1999-2004 Intel Corporation.
Mar 20 16:39:16 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Mar 20 16:39:16 user.warn kernel: FW Version=$Version$
Mar 20 16:39:16 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Mar 20 16:39:16 user.info kernel: ThunderLAN driver v1.15
Mar 20 16:39:16 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Mar 20 16:39:16 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Mar 20 16:39:16 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Mar 20 16:39:16 user.warn kernel: sk98lin: No adapter found.
Mar 20 16:39:16 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Mar 20 16:39:16 user.info kernel: 8139too Fast Ethernet driver 0.9.26
Mar 20 16:39:16 user.info kernel: PCI: Found IRQ 10 for device 00:0d.0
Mar 20 16:39:16 user.info kernel: eth0: RealTek RTL8139 at 0xc8800000, 00:50:ba:b5:1e:0e, IRQ 10
Mar 20 16:39:16 user.debug kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Mar 20 16:39:16 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Mar 20 16:39:16 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 20 16:39:16 user.info kernel: PIIX4: IDE controller at PCI slot 00:07.1
Mar 20 16:39:16 user.info kernel: PIIX4: chipset revision 1
Mar 20 16:39:16 user.info kernel: PIIX4: not 100% native mode: will probe irqs later
Mar 20 16:39:16 user.info kernel: ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:pio
Mar 20 16:39:16 user.info kernel: ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
Mar 20 16:39:16 user.warn kernel: hda: SAMSUNG HD300LD, ATA DISK drive
Mar 20 16:39:16 user.warn kernel: hdb: WDC WD2500JB-00EVA0, ATA DISK drive
Mar 20 16:39:16 user.warn kernel: hdc: ST3300831A, ATA DISK drive
Mar 20 16:39:16 user.warn kernel: e
Mar 20 16:39:16 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 20 16:39:16 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 20 16:39:16 user.warn kernel: hda: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hda: host protected area => 1
Mar 20 16:39:16 user.info kernel: hda: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(33)
Mar 20 16:39:16 user.warn kernel: hdb: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hdb: host protected area => 1
Mar 20 16:39:16 user.info kernel: hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
Mar 20 16:39:16 user.warn kernel: hdc: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hdc: host protected area => 1
Mar 20 16:39:16 user.info kernel: hdc: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(33)
Mar 20 16:39:16 user.warn kernel: hdd: attached ide-disk driver.
Mar 20 16:39:16 user.warn kernel: hdd: host protected area => 1
Mar 20 16:39:16 user.info kernel: hdd: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
Mar 20 16:39:16 user.info kernel: Partition check:
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus1/target0/lun0: p1
Mar 20 16:39:16 user.info kernel: /dev/ide/host0/bus1/target1/lun0: p1
Mar 20 16:39:16 user.info kernel: SCSI subsystem driver Revision: 1.00
Mar 20 16:39:16 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Mar 20 16:39:16 user.info kernel: Detecting Adaptec I2O RAID controllers.
Mar 20 16:39:16 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 15 2006 01:22:52)
Mar 20 16:39:16 user.warn kernel: scsi: Detection failed (no card)
Mar 20 16:39:16 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Mar 20 16:39:16 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Mar 20 16:39:16 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Mar 20 16:39:16 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Mar 20 16:39:16 user.warn kernel: 3w-xxxx: No cards found.
Mar 20 16:39:16 user.debug kernel: libata version 1.20 loaded.
Mar 20 16:39:16 user.info kernel: raw1394: /dev/raw1394 device initialized
Mar 20 16:39:16 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Mar 20 16:39:16 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Mar 20 16:39:16 user.info kernel: usb.c: registered new driver usbdevfs
Mar 20 16:39:16 user.info kernel: usb.c: registered new driver hub
Mar 20 16:39:16 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Mar 20 16:39:16 user.info kernel: PCI: Found IRQ 9 for device 00:07.2
Mar 20 16:39:16 user.info kernel: host/uhci.c: USB UHCI at I/O 0x1440, IRQ 9
Mar 20 16:39:16 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 20 16:39:16 user.info kernel: hub.c: USB hub found
Mar 20 16:39:16 user.info kernel: hub.c: 2 ports detected
Mar 20 16:39:16 user.info kernel: Initializing USB Mass Storage driver.
Mar 20 16:39:16 user.info kernel: usb.c: registered new driver usb-storage
Mar 20 16:39:16 user.info kernel: USB Mass Storage support registered.
Mar 20 16:39:16 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 20 16:39:16 user.info kernel: IP Protocols: ICMP, UDP, TCP
Mar 20 16:39:16 user.info kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Mar 20 16:39:16 user.info kernel: TCP: Hash tables configured (established 8192 bind 16384)
Mar 20 16:39:16 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 20 16:39:16 user.notice kernel: RAMDISK: NASLite file system found at block 0
Mar 20 16:39:16 user.warn kernel: .<6>hub.c: new USB device 00:07.2-1, assigned address 2
Mar 20 16:39:16 user.warn kernel: <6>scsi1 : SCSI emulation for USB Mass Storage devices
Mar 20 16:39:16 user.warn kernel: Vendor: MicroAdv Model: QuickiDrive64M Rev: 2.00
Mar 20 16:39:16 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 20 16:39:16 user.warn kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Mar 20 16:39:16 user.warn kernel: .SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
Mar 20 16:39:16 user.warn kernel: sda: Write Protect is off
Mar 20 16:39:16 user.info kernel: /dev/scsi/host1/bus0/target0/lun0:. unknown partition table
Mar 20 16:39:16 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Mar 20 16:39:16 user.debug kernel: USB Mass Storage device found at 2
Mar 20 16:39:16 user.warn kernel: .<6>Freeing initrd memory: 1601k freed
Mar 20 16:39:16 user.warn kernel: E
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Tue Mar 27, 2007 8:38 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Keep an eye for these in the syslog:

Mar 20 16:39:16 user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Mar 20 16:39:16 user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }


If you see those accumulating, then the problem is with your primary IDE master. Turn the SMART probe off on that drive via the admin interface. Reboot and check to see if the problem persists...
Top
 Profile  
 
webdad
 Post subject:
PostPosted: Tue Apr 03, 2007 10:10 pm 
Offline

Joined: Wed Mar 02, 2005 9:27 am
Posts: 23
I'll reboot the server and check, but I would think that if it was a continuing problem, then I would see them accumulated at the bottom of the log, wouldn't I?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group