The following are planned for v2.04:
1. Network configuration will be changed to always use the last NIC found. Currently NASLite-2 always configures eth0. The change will allow the use of external NICs even if on-board NICs can not be disabled. For most installations the change will be transparent.
2. The "Printers and Faxes" icon will be removed from the root shares. The printer spools share is not used by NASlite-2 and is therefore not required.
3. The NASLite-2 OS level will be reduced to 0 in order to lower browser authority and always allow other members of the workgroup to become master browser. That should correct problems experienced on some networks.
4. Check source filesystem integrity prior to executing the mirror event. That will ensure that only valid data is mirrored and avoid the destruction of a good mirror due to a damaged source.
5. Provide alarm functionality to the mirror event in order to provide audible feedback on mirror problems.
The above are in the process of being implemented. We are also looking at RAID status and associated event alarms. This will probably become item 6 of the above list once we are positive that it will make it into 2.04.
I also hope that v2.03 was a worth while upgrade and it's features will prove useful to most installations.
As always, your comments, ideas and suggestions are welcome...
Thank you all for your support.