NASLite Network Attached Storage

I bought a LSI MegaRaid 150-4 and put 4x400G Seagate SATA drives on it. Set it up as RAID 5.

When I boot the computer, LSI firmware kicks in and these are the notes:
1 logical drive found on adaptor - this supposed to be the RAID 5 array?
1 drive managed by BIOS - I assumed this supposed to be the USB drive?

Naslite started, but it failed to mount the array.

If I shut it down, there is a comment: flushing megaraid, so I assumed the RAID should be working under NASLITE

I read some posts that Naslite 2.01 can't recognize 1+T array, but supposed to be fix on 2.02.

Am I doing something wrong? Can somebody walk me through step by step on how to set this things up or 1+T array is still a problem with 2.02

I run the same card in my machine, did you format the drive from within NASLite-2 ?


The Terrabyte issue was fixed in v2.02.

Ralph.. never mind..

I forgot to format the drive in Naslite...