NASLite Network Attached Storage

The Artigo does not boot from latest NL2 (2.6) for the same reason (netwrok device not found).

Mike, I'm not sure what you were advising me to do. If it's how to install a NL to USB stick without external CD drive, I obviously already know how to do it (I've been a NL user since the early days). If it's how to get the Hardware Detection Tool to a bootable USB stick, I've not tried this yet, but I figured if NL2.6 doesn't boot, there's little point in trying this...

Ok.

I managed to "burn" the HDT iso to the USB stick using the unetbootin utility (http://unetbootin.sourceforge.net/), and booted the Artigo with it.



Immediate problem, I have no "Kernel Modules menu", and my NIC isn't mentioned at all, in any of the menus. Here are all the menus I have:

PCI Devices (22)
Disks (3)
Memory (2)
Processor
Motherboard
Bios
Chassis
System
VESA
Syslinux
Summary

The 22 PCI Devices are all unknown (something to do with a pci.ids file missing). There is no mention of storage cards or network cards in any of the other menus, they mostly list the vendor and version.

CORE3 should support the NIC in that. What's the PCI ID of the network interface?

Sorry the Artigo is now booted under Freenas and in the process of transferring close to 1TB from my old Nasbox, process which will take close to 4-5 days as I can't leave the nasbox on all the time (too noisy!).

As I said all PCI devices were "unkown" to the HDT. I'll boot into the BIOS and see if it's listed there when the data transfer is done.