NASLite Network Attached Storage

I installed NL 2 on a single HDD (Samsung SATA - 1000 GBytes) and the installer creates 2 Partitions
1) 7,7 MB Disk-0 with the server and configuration data
2) nearly 1000 GB ---- should be Disk-1 but is nort found.

Server is running and unlocked but in the storage configuration there is only Disk-0 found.
So no chance to mount or format Disk-1. What is running bad?

I tried the same with a Samsung SATA - 500 GBytes, but the same problem.

Thanks in advance for any help. franschesko

The remaining storage on your drive is still Disk-0. You need to format and export the storage area of Disk-0.

Hallo NickC,
this was the correct answer and it helped me.
I didn't recognize, that in new release of Naslite 2-HDD
the first disk now isn't Disk-1 but Disk-0.
I needed a long time for answering, because I
Worked not at the servers place but in another town.

Thanks for a good and very quick answer.
Franschesko