NASLite Network Attached Storage

I have been running NASLite 2-USB for about 1.5 years. I recently put up a FREENas server and have noticed the network speed is much higher. I actually just changed out the entire motherboard in the NASLite machine but the network is still slow - I'd say about 10 MBPs where I get 70-80 in FREENas. I see that the card is being set to full duplex but I see nowhere where the network SPEED is indicated nor do I see anywhere to check it or force it to 100 to make sure it's not doing 10 (everything on my network is 10/100 and all the other machines run fine at 70-100).

Is there anywhere I can check to confirm the CURRENT NASLite network settings?

Thanks

Rob

Take a look at the Device Details at the bottom of the Network Status screen.

Thanks but that doesn't tell me the speed unless I'm missing something:

eth0: Lite-On 82c168 PNIC rev 33 at 0xec00, 00:A0:CC:50:39:CD, IRQ 11.
eth0: Setting full-duplex based on MII#1 link partner capability of 41e1.
eth0 Link encap:Ethernet HWaddr 00:A0:CC:50:39:CD
inet addr:192.168.1.75 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15617848 errors:1 dropped:0 overruns:0 frame:3
TX packets:9423542 errors:4 dropped:0 overruns:4 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2086215701 (1.9 GiB) TX bytes:1237645352 (1.1 GiB)
Interrupt:11 Base address:0xec00

Take another look. It's the very first column just below the "Device Details" caption. BTW, what version of NASLite-2 are you using?

Here's a screenshot. Am I just not seeing it? All I see is the full duplex part, not the speed. Version's bottom left. I'm about to upgrade, just haven't gotten to it yet.

The capture I posted is from the latest release - v2.06. The Device Details were modified in v2.04 ( http://www.serverelements.com/history.p ... Lite-2-USB ) to include the details you are looking for.

Huh? That I don't believe.

I'm pretty sure it's because of the NIC speed. I'm going to be putting the latest version on tonight (see discussion above) so that I can tell what speed the NIC is at. My point is not to disparage NASLite btw, the reason I did FREENas on the new server is because I don't have the money for another license right now. But the fact that FREENas goes so much quicker made me realize that there is some issue with my NASLite server.