NASLite Network Attached Storage

I've seen this in my logs many times and am not sure what it means:

Nov 20 20:14:23 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0

10.1.1.1 is my gateway/router -
Could this be related to a RIP protocol enabled on the router?

Full naslite server log below - Thanks!

System Message Log:

* Nov 20 17:19:00 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
* Nov 20 17:19:00 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
* Nov 20 17:19:00 user.info kernel: BIOS-provided physical RAM map:
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 0000000000100000 - 000000000f66f000 (usable)
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 000000000f66f000 - 000000000f6e9000 (ACPI NVS)
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 000000000f6e9000 - 000000000f6ec000 (usable)
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 000000000f6ec000 - 000000000f6ff000 (ACPI data)
* Nov 20 17:19:00 user.warn kernel: BIOS-e820: 000000000f6ff000 - 000000000f700000 (usable)
* Nov 20 17:19:00 user.notice kernel: 0MB HIGHMEM available.
* Nov 20 17:19:00 user.notice kernel: 247MB LOWMEM available.
* Nov 20 17:19:00 user.warn kernel: On node 0 totalpages: 63232
* Nov 20 17:19:00 user.warn kernel: zone(0): 4096 pages.
* Nov 20 17:19:00 user.warn kernel: zone(1): 59136 pages.
* Nov 20 17:19:00 user.warn kernel: zone(2): 0 pages.
* Nov 20 17:19:00 user.info kernel: ACPI: RSDP (v000 INTEL ) @ 0x000fe020
* Nov 20 17:19:00 user.info kernel: ACPI: RSDT (v001 INTEL D945GTP 0x00000ffc MSFT 0x01000013) @ 0x0f6fde48
* Nov 20 17:19:00 user.info kernel: ACPI: FADT (v001 INTEL D945GTP 0x00000ffc MSFT 0x01000013) @ 0x0f6fcf10
* Nov 20 17:19:00 user.info kernel: ACPI: MADT (v001 INTEL D945GTP 0x00000ffc MSFT 0x01000013) @ 0x0f6fce10
* Nov 20 17:19:00 user.info kernel: ACPI: WDDT (v001 INTEL D945GTP 0x00000ffc MSFT 0x01000013) @ 0x0f6f6f90
* Nov 20 17:19:00 user.info kernel: ACPI: MCFG (v001 INTEL D945GTP 0x00000ffc MSFT 0x01000013) @ 0x0f6f6f10
* Nov 20 17:19:00 user.info kernel: ACPI: ASF! (v032 INTEL D945GTP 0x00000ffc MSFT 0x01000013) @ 0x0f6fcd10
* Nov 20 17:19:00 user.info kernel: ACPI: SSDT (v001 INTEL SetupVar 0x00000ffc MSFT 0x01000013) @ 0x0f6f6e90
* Nov 20 17:19:00 user.info kernel: ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x0f6e4d90
* Nov 20 17:19:00 user.info kernel: ACPI: DSDT (v001 INTEL D945GTP 0x00000ffc MSFT 0x01000013) @ 0x00000000
* Nov 20 17:19:00 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
* Nov 20 17:19:00 user.info kernel: Initializing CPU#0
* Nov 20 17:19:00 user.warn kernel: Detected 2800.127 MHz processor.
* Nov 20 17:19:00 user.warn kernel: Console: colour VGA+ 80x25
* Nov 20 17:19:00 user.warn kernel: Calibrating delay loop. 5583.66 BogoMIPS
* Nov 20 17:19:00 user.info kernel: Memory: 243384k/252928k available (2214k kernel code, 8592k reserved, 642k data, 540k init, 0k highmem)
* Nov 20 17:19:00 user.info kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
* Nov 20 17:19:00 user.info kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
* Nov 20 17:19:00 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
* Nov 20 17:19:00 user.info kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
* Nov 20 17:19:00 user.warn kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
* Nov 20 17:19:00 user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
* Nov 20 17:19:00 user.info kernel: CPU: L2 cache: 256K
* Nov 20 17:19:00 user.debug kernel: CPU: After generic, caps: bfebfbff 20100000 00000000 00000000
* Nov 20 17:19:00 user.debug kernel: CPU: Common caps: bfebfbff 20100000 00000000 00000000
* Nov 20 17:19:00 user.warn kernel: CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 01
* Nov 20 17:19:00 user.info kernel: Enabling fast FPU save and restore. done.
* Nov 20 17:19:00 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
* Nov 20 17:19:00 user.info kernel: Checking 'hlt' instruction. OK.
* Nov 20 17:19:00 user.warn kernel: ACPI: IRQ9 SCI: Level Trigger.
* Nov 20 17:19:00 user.warn kernel: POSIX conformance testing by UNIFIX
* Nov 20 17:19:00 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
* Nov 20 17:19:00 user.warn kernel: mtrr: detected mtrr type: Intel
* Nov 20 17:19:00 user.info kernel: ACPI: Subsystem revision 20040326
* Nov 20 17:19:00 user.info kernel: PCI: Using configuration type 1
* Nov 20 17:19:00 user.info kernel: ACPI: Interpreter enabled
* Nov 20 17:19:00 user.info kernel: ACPI: Using PIC for interrupt routing
* Nov 20 17:19:00 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
* Nov 20 17:19:00 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
* Nov 20 17:19:00 user.warn kernel: PCI: Probing PCI hardware (bus 00)
* Nov 20 17:19:00 user.info kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
* Nov 20 17:19:00 user.err kernel: PCI: Unable to handle 64-bit address space for
* Nov 20 17:19:00 user.err kernel: PCI: Unable to handle 64-bit address space for
* Nov 20 17:19:00 user.err kernel: PCI: Unable to handle 64-bit address space for
* Nov 20 17:19:00 user.err kernel: PCI: Unable to handle 64-bit address space for
* Nov 20 17:19:00 user.err kernel: PCI: Unable to handle 64-bit address space for
* Nov 20 17:19:00 user.warn kernel: Transparent bridge - PCI device 8086:244e
* Nov 20 17:19:00 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
* Nov 20 17:19:00 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
* Nov 20 17:19:00 user.debug kernel:
* Nov 20 17:19:00 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
* Nov 20 17:19:00 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
* Nov 20 17:19:00 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
* Nov 20 17:19:00 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
* Nov 20 17:19:00 user.info kernel: PCI: Probing PCI hardware
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
* Nov 20 17:19:00 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
* Nov 20 17:19:00 user.info kernel: PCI: Using ACPI for IRQ routing
* Nov 20 17:19:00 user.info kernel: Linux NET4.0 for Linux 2.4
* Nov 20 17:19:00 user.info kernel: Based upon Swansea University Computer Society NET3.039
* Nov 20 17:19:00 user.warn kernel: Initializing RT netlink socket
* Nov 20 17:19:00 user.warn kernel: Starting kswapd
* Nov 20 17:19:00 user.info kernel: Journalled Block Device driver loaded
* Nov 20 17:19:00 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
* Nov 20 17:19:00 user.info kernel: devfs: boot_options: 0x1
* Nov 20 17:19:00 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
* Nov 20 17:19:00 user.info kernel: ACPI: Power Button (FF) [PWRF]
* Nov 20 17:19:00 user.info kernel: ACPI: Sleep Button (CM) [SLPB]
* Nov 20 17:19:00 user.info kernel: ACPI: Processor [CPU0] (supports C1)
* Nov 20 17:19:00 user.info kernel: ACPI: Processor [CPU1] (supports C1)
* Nov 20 17:19:00 user.info kernel: ACPI: Processor [CPU2] (supports C1)
* Nov 20 17:19:00 user.info kernel: ACPI: Processor [CPU3] (supports C1)
* Nov 20 17:19:00 user.warn kernel: pty: 256 Unix98 ptys configured
* Nov 20 17:19:00 user.info kernel: Real Time Clock Driver v1.10f
* Nov 20 17:19:00 user.info kernel: Floppy drive(s): fd0 is 1.44M
* Nov 20 17:19:00 user.warn kernel: keyboard: Timeout - AT keyboard not present?(ed)
* Nov 20 17:19:00 user.warn kernel: keyboard: Timeout - AT keyboard not present?(f4)
* Nov 20 17:19:00 user.info kernel: FDC 0 is a post-1991 82077
* Nov 20 17:19:00 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
* Nov 20 17:19:00 user.info kernel: loop: loaded (max 8 devices)
* Nov 20 17:19:00 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
* Nov 20 17:19:00 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
* Nov 20 17:19:00 user.debug kernel: PCI: Setting latency timer of device 01:00.0 to 64
* Nov 20 17:19:00 user.info kernel: e1000: 01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:d0:b7:1d:0c:cc
* Nov 20 17:19:00 user.info kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
* Nov 20 17:19:00 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
* Nov 20 17:19:00 user.warn kernel: FW Version=$Version$
* Nov 20 17:19:00 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
* Nov 20 17:19:00 user.info kernel: ThunderLAN driver v1.15
* Nov 20 17:19:00 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
* Nov 20 17:19:00 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
* Nov 20 17:19:00 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
* Nov 20 17:19:00 user.warn kernel: sk98lin: No adapter found.
* Nov 20 17:19:00 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
* Nov 20 17:19:00 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
* Nov 20 17:19:00 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Nov 20 17:19:00 user.warn kernel: hda: C/H/S=0/0/0 from BIOS ignored
* Nov 20 17:19:00 user.warn kernel: hdb: C/H/S=0/0/0 from BIOS ignored
* Nov 20 17:19:00 user.warn kernel: hda: HL-DT-ST RW/DVD GCC-4320B, ATAPI CD/DVD-ROM drive
* Nov 20 17:19:00 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
* Nov 20 17:19:00 user.info kernel: SCSI subsystem driver Revision: 1.00
* Nov 20 17:19:00 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
* Nov 20 17:19:00 user.info kernel: Detecting Adaptec I2O RAID controllers.
* Nov 20 17:19:00 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
* Nov 20 17:19:00 user.warn kernel: scsi: Detection failed (no card)
* Nov 20 17:19:00 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
* Nov 20 17:19:00 user.notice kernel: megaraid: found 0x1000:0x1960:bus 6:slot 0:func 0
* Nov 20 17:19:00 user.notice kernel: scsi1:Found MegaRAID controller at 0xd002d000, IRQ:9
* Nov 20 17:19:00 user.notice kernel: megaraid: [T13P:G401] detected 1 logical drives.
* Nov 20 17:19:00 user.notice kernel: megaraid: supports extended CDBs.
* Nov 20 17:19:00 user.info kernel: megaraid: channel[0] is raid.
* Nov 20 17:19:00 user.info kernel: scsi1 : LSI Logic MegaRAID T13P 254 commands 16 targs 4 chans 7 luns
* Nov 20 17:19:00 user.notice kernel: scsi1: scanning scsi channel 0 for logical drives.
* Nov 20 17:19:00 user.warn kernel: Vendor: MegaRAID Model: LD 0 RAID5 1430G Rev: T13P
* Nov 20 17:19:00 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
* Nov 20 17:19:00 user.notice kernel: scsi1: scanning scsi channel 1 for logical drives.
* Nov 20 17:19:00 user.notice kernel: scsi1: scanning scsi channel 2 for logical drives.
* Nov 20 17:19:00 user.notice kernel: scsi1: scanning scsi channel 3 for logical drives.
* Nov 20 17:19:00 user.notice kernel: scsi1: scanning scsi channel 4 [P0] for physical devices.
* Nov 20 17:19:00 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
* Nov 20 17:19:00 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
* Nov 20 17:19:00 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
* Nov 20 17:19:00 user.warn kernel: 3w-xxxx: No cards found.
* Nov 20 17:19:00 user.debug kernel: libata version 1.20 loaded.
* Nov 20 17:19:00 user.warn kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
* Nov 20 17:19:00 user.warn kernel: SCSI device sda: 2930196480 512-byte hdwr sectors (1500261 MB)
* Nov 20 17:19:00 user.info kernel: Partition check:
* Nov 20 17:19:00 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
* Nov 20 17:19:00 user.info kernel: tialized
* Nov 20 17:19:00 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
* Nov 20 17:19:00 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
* Nov 20 17:19:00 user.info kernel: usb.c: registered new driver usbdevfs
* Nov 20 17:19:00 user.info kernel: usb.c: registered new driver hub
* Nov 20 17:19:00 user.debug kernel: PCI: Setting latency timer of device 00:1d.7 to 64
* Nov 20 17:19:00 user.info kernel: ehci_hcd 00:1d.7: PCI device 8086:27cc
* Nov 20 17:19:00 user.info kernel: ehci_hcd 00:1d.7: irq 11, pci mem d0031000
* Nov 20 17:19:00 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
* Nov 20 17:19:00 user.info kernel: ehci_hcd 00:1d.7: enabled 64bit PCI DMA
* Nov 20 17:19:00 user.debug kernel: PCI: cache line size of 128 is not supported by device 00:1d.7
* Nov 20 17:19:00 user.info kernel: ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
* Nov 20 17:19:00 user.info kernel: hub.c: USB hub found
* Nov 20 17:19:00 user.info kernel: hub.c: 8 ports detected
* Nov 20 17:19:00 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
* Nov 20 17:19:00 user.debug kernel: PCI: Setting latency timer of device 00:1d.0 to 64
* Nov 20 17:19:00 user.info kernel: host/uhci.c: USB UHCI at I/O 0x2080, IRQ 11
* Nov 20 17:19:00 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
* Nov 20 17:19:00 user.info kernel: hub.c: USB hub found
* Nov 20 17:19:00 user.info kernel: hub.c: 2 ports detected
* Nov 20 17:19:00 user.debug kernel: PCI: Setting latency timer of device 00:1d.1 to 64
* Nov 20 17:19:00 user.info kernel: host/uhci.c: USB UHCI at I/O 0x2060, IRQ 10
* Nov 20 17:19:00 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
* Nov 20 17:19:00 user.info kernel: hub.c: USB hub found
* Nov 20 17:19:00 user.info kernel: hub.c: 2 ports detected
* Nov 20 17:19:00 user.debug kernel: PCI: Setting latency timer of device 00:1d.2 to 64
* Nov 20 17:19:00 user.info kernel: host/uhci.c: USB UHCI at I/O 0x2040, IRQ 9
* Nov 20 17:19:00 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
* Nov 20 17:19:00 user.info kernel: hub.c: USB hub found
* Nov 20 17:19:00 user.info kernel: hub.c: 2 ports detected
* Nov 20 17:19:00 user.debug kernel: PCI: Setting latency timer of device 00:1d.3 to 64
* Nov 20 17:19:00 user.info kernel: host/uhci.c: USB UHCI at I/O 0x2020, IRQ 11
* Nov 20 17:19:00 user.info kernel: usb.c: new USB bus registered, assigned bus number 5
* Nov 20 17:19:00 user.info kernel: hub.c: USB hub found
* Nov 20 17:19:00 user.info kernel: hub.c: 2 ports detected
* Nov 20 17:19:00 user.info kernel: usb.c: registered new driver usbkbd
* Nov 20 17:19:00 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
* Nov 20 17:19:00 user.info kernel: Initializing USB Mass Storage driver.
* Nov 20 17:19:00 user.info kernel: usb.c: registered new driver usb-storage
* Nov 20 17:19:00 user.info kernel: USB Mass Storage support registered.
* Nov 20 17:19:00 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
* Nov 20 17:19:00 user.info kernel: IP Protocols: ICMP, UDP, TCP
* Nov 20 17:19:00 user.info kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
* Nov 20 17:19:00 user.info kernel: TCP: Hash tables configured (established 16384 bind 32768)
* Nov 20 17:19:00 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
* Nov 20 17:19:00 user.notice kernel: RAMDISK: NASLite file system found at block 0
* Nov 20 17:19:00 user.warn kernel: .<6>Freeing initrd memory: 1952k freed
* Nov 20 17:19:00 user.warn kernel: VFS: Mounted root (ext2 filesystem).
* Nov 20 17:19:00 user.info kernel: Mounted devfs on /dev
* Nov 20 17:19:00 user.info kernel: Freeing unused kernel memory: 540k freed
* Nov 20 17:19:00 user.info kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
* Nov 20 17:19:00 user.info kernel: kjournald starting. Commit interval 5 seconds
* Nov 20 17:19:00 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
* Nov 20 17:19:00 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Nov 20 17:25:19 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 17:29:09 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 17:34:14 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 17:47:33 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 17:55:41 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 18:04:33 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 18:25:44 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 19:13:45 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 19:38:02 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 19:50:05 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 20:02:14 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0
* Nov 20 20:14:23 user.warn kernel: 10.1.1.1 sent an invalid ICMP type 3, code 3 error to a broadcast: 10.1.1.255 on eth0

Any ideas anyone?

Check your subnet masks on your network and make sure it's correct. Here is a link to some icmp messages. Another idea might be a firewall issue.

http://support.microsoft.com/kb/170292

Read up on errors listed on the link provided - not much I found applies.

The errors continue to stack up in the log but performance and stability seem fine. I'll just write it off as kernel feedback and keep using the NAS.

If anyone else has seen this though, a solution/workaround or better explination would be great.

What is the nas ip? I think you have a netmask problem. Make sure all members of your lan have the same netmask.

My NasLite NAS IP is 10.1.1.40

This is the info I got for my LAN when I looked it up:

List of networks
for the 10.1.1.0 network with the subnet mask 255.255.255.0
Network Hosts Broadcast Address from to
10.1.1.0 10.1.1.1 10.1.1.254 10.1.1.255

What are the netmasks for those? They should all match.

The IP scope I've been using is 10.1.1.x and the subnet mask for all systems on the LAN is set for 255.255.255.0 -

This has nothing to do with NASLite, the problem is with the router at 10.1.1.1, it's sending a host unreachable ICMP to the broadcast address, which every host on the network sees, NASLite is simply logging it.

I'd look at the router config and see what it's trying to connect to, probably a time server, remote syslog, maybe even something UPNP somewhere.

It appears that enablind RIP within the router is the source -
When rip is disabled or changed to outbound only the info in the log stops or becomes less frequent.

Good to know - and I don't notice a difference either way -


Thanks for the replies and tips!