NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Mon May 05, 2025 9:09 am

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Previous topic | Next topic 
Author Message
mrclunk
PostPosted: Wed Nov 28, 2007 1:37 pm 
Offline

Joined: Mon Jan 08, 2007 7:04 pm
Posts: 18
Can anyone tell me what these errors mean?

user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }

user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }

I've just configured a Naslite 2 USB box and it seems to be working fine. Get about 50mb/s write and 40mb/s read. But i see these errors in the syslog and there making me nervous!

I've one IDE drive and one SATA drive.

Fantastic that AFP support is now availiable, brought me back into the Naslite fold after some time in the slow world of Freenas!


Last edited by mrclunk on Thu Nov 29, 2007 10:40 am, edited 1 time in total.

Top
 Profile  
 
Tony
 Post subject:
PostPosted: Wed Nov 28, 2007 10:27 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Many things can produce those. Bad cable, bad connection, bad interface, misconfiguration, SMART problems, etc. Can you post a complete syslog for a closer look?
Top
 Profile  
 
mrclunk
 Post subject:
PostPosted: Thu Nov 29, 2007 8:40 am 
Offline

Joined: Mon Jan 08, 2007 7:04 pm
Posts: 18
umm sounds like a headache,

here we go.
I'll have a mess around with some bios settings too

Quote:
System Message Log:

Nov 29 11:51:25 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
Nov 29 11:51:25 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
Nov 29 11:51:25 user.info kernel: BIOS-provided physical RAM map:
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 0000000000100000 - 000000001dfb0000 (usable)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 000000001dfb0000 - 000000001dfc0000 (ACPI data)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 000000001dfc0000 - 000000001dff0000 (ACPI NVS)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 000000001dff0000 - 000000001e000000 (reserved)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 29 11:51:25 user.warn kernel: BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
Nov 29 11:51:25 user.notice kernel: 0MB HIGHMEM available.
Nov 29 11:51:25 user.notice kernel: 479MB LOWMEM available.
Nov 29 11:51:25 user.warn kernel: On node 0 totalpages: 122800
Nov 29 11:51:25 user.warn kernel: zone(0): 4096 pages.
Nov 29 11:51:25 user.warn kernel: zone(1): 118704 pages.
Nov 29 11:51:25 user.warn kernel: zone(2): 0 pages.
Nov 29 11:51:25 user.info kernel: ACPI: RSDP (v000 ACPIAM ) @ 0x000f84a0
Nov 29 11:51:25 user.info kernel: ACPI: RSDT (v001 A M I OEMRSDT 0x01000719 MSFT 0x00000097) @ 0x1dfb0000
Nov 29 11:51:25 user.info kernel: ACPI: FADT (v002 A M I OEMFACP 0x01000719 MSFT 0x00000097) @ 0x1dfb0200
Nov 29 11:51:25 user.info kernel: ACPI: MADT (v001 A M I OEMAPIC 0x01000719 MSFT 0x00000097) @ 0x1dfb0390
Nov 29 11:51:25 user.info kernel: ACPI: MCFG (v001 A M I OEMMCFG 0x01000719 MSFT 0x00000097) @ 0x1dfb0400
Nov 29 11:51:25 user.info kernel: ACPI: OEMB (v001 A M I AMI_OEM 0x01000719 MSFT 0x00000097) @ 0x1dfc0040
Nov 29 11:51:25 user.info kernel: ACPI: DSDT (v001 P4M89 P4M89130 0x00000130 INTL 0x02002026) @ 0x00000000
Nov 29 11:51:25 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
Nov 29 11:51:25 user.info kernel: Initializing CPU#0
Nov 29 11:51:25 user.warn kernel: Detected 2418.995 MHz processor.
Nov 29 11:51:25 user.warn kernel: Console: colour VGA+ 80x25
Nov 29 11:51:25 user.warn kernel: Calibrating delay loop. 4823.44 BogoMIPS
Nov 29 11:51:25 user.info kernel: Memory: 479412k/491200k available (2214k kernel code, 11400k reserved, 642k data, 540k init, 0k highmem)
Nov 29 11:51:25 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 29 11:51:25 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Nov 29 11:51:25 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 29 11:51:25 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 29 11:51:25 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 29 11:51:25 user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 29 11:51:25 user.info kernel: CPU: L2 cache: 512K
Nov 29 11:51:25 user.debug kernel: CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
Nov 29 11:51:25 user.debug kernel: CPU: Common caps: bfebfbff 00000000 00000000 00000000
Nov 29 11:51:25 user.warn kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Nov 29 11:51:25 user.info kernel: Enabling fast FPU save and restore. done.
Nov 29 11:51:25 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
Nov 29 11:51:25 user.info kernel: Checking 'hlt' instruction. OK.
Nov 29 11:51:25 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Nov 29 11:51:25 user.warn kernel: POSIX conformance testing by UNIFIX
Nov 29 11:51:25 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 29 11:51:25 user.warn kernel: mtrr: detected mtrr type: Intel
Nov 29 11:51:25 user.info kernel: ACPI: Subsystem revision 20040326
Nov 29 11:51:25 user.info kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
Nov 29 11:51:25 user.info kernel: PCI: Using configuration type 1
Nov 29 11:51:25 user.info kernel: ACPI: Interpreter enabled
Nov 29 11:51:25 user.info kernel: ACPI: Using PIC for interrupt routing
Nov 29 11:51:25 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
Nov 29 11:51:25 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Nov 29 11:51:25 user.warn kernel: PCI: Probing PCI hardware (bus 00)
Nov 29 11:51:25 user.info kernel: PCI: Via IRQ fixup
Nov 29 11:51:25 user.info kernel: PCI: Via IRQ fixup
Nov 29 11:51:25 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 29 11:51:25 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Nov 29 11:51:25 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *5 10 11 12 14 15)
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 29 11:51:25 user.info kernel: PCI: Probing PCI hardware
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Nov 29 11:51:25 user.info kernel: PCI: Using ACPI for IRQ routing
Nov 29 11:51:25 user.info kernel: Linux NET4.0 for Linux 2.4
Nov 29 11:51:25 user.info kernel: upon Swansea University Computer Society NET3.039
Nov 29 11:51:25 user.warn kernel: Initializing RT netlink socket
Nov 29 11:51:25 user.warn kernel: Starting kswapd
Nov 29 11:51:25 user.info kernel: Journalled Block Device driver loaded
Nov 29 11:51:25 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Nov 29 11:51:25 user.info kernel: devfs: boot_options: 0x1
Nov 29 11:51:25 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Nov 29 11:51:25 user.info kernel: ACPI: Power Button (FF) [PWRF]
Nov 29 11:51:25 user.info kernel: ACPI: Processor [CPU1] (supports C1)
Nov 29 11:51:25 user.info kernel: ACPI: Processor [CPU2] (supports C1)
Nov 29 11:51:25 user.warn kernel: pty: 256 Unix98 ptys configured
Nov 29 11:51:25 user.info kernel: Real Time Clock Driver v1.10f
Nov 29 11:51:25 user.info kernel: Floppy drive(s): fd0 is 1.44M
Nov 29 11:51:25 user.warn kernel: keyboard: Timeout - AT keyboard not present?(ed)
Nov 29 11:51:25 user.warn kernel: keyboard: Timeout - AT keyboard not present?(f4)
Nov 29 11:51:25 user.warn kernel: floppy0: no floppy controllers found
Nov 29 11:51:25 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Nov 29 11:51:25 user.info kernel: loop: loaded (max 8 devices)
Nov 29 11:51:25 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Nov 29 11:51:25 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
Nov 29 11:51:25 user.info kernel: e1000: 00:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:09:b2:3f
Nov 29 11:51:25 user.info kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Nov 29 11:51:25 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Nov 29 11:51:25 user.warn kernel: FW Version=$Version$
Nov 29 11:51:25 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Nov 29 11:51:25 user.info kernel: ThunderLAN driver v1.15
Nov 29 11:51:25 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Nov 29 11:51:25 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Nov 29 11:51:25 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Nov 29 11:51:25 user.warn kernel: sk98lin: No adapter found.
Nov 29 11:51:25 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Nov 29 11:51:25 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 29 11:51:25 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 29 11:51:25 user.info kernel: VP_IDE: IDE controller at PCI slot 00:0f.1
Nov 29 11:51:25 user.info kernel: VP_IDE: chipset revision 6
Nov 29 11:51:25 user.info kernel: VP_IDE: not 100% native mode: will probe irqs later
Nov 29 11:51:25 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 29 11:51:25 user.info kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci00:0f.1
Nov 29 11:51:25 user.info kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Nov 29 11:51:25 user.info kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Nov 29 11:51:25 user.warn kernel: hda: Maxtor 6K040L0, ATA DISK drive
Nov 29 11:51:25 user.warn kernel: hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive
Nov 29 11:51:25 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 29 11:51:25 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 29 11:51:25 user.warn kernel: hda: attached ide-disk driver.
Nov 29 11:51:25 user.warn kernel: hda: host protected area => 1
Nov 29 11:51:25 user.info kernel: hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(133)
Nov 29 11:51:25 user.info kernel: Partition check:
Nov 29 11:51:25 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1
Nov 29 11:51:25 user.info kernel: SCSI subsystem driver Revision: 1.00
Nov 29 11:51:25 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Nov 29 11:51:25 user.info kernel: Detecting Adaptec I2O RAID controllers.
Nov 29 11:51:25 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
Nov 29 11:51:25 user.warn kernel: scsi: Detection failed (no card)
Nov 29 11:51:25 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Nov 29 11:51:25 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Nov 29 11:51:25 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Nov 29 11:51:25 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Nov 29 11:51:25 user.warn kernel: 3w-xxxx: No cards found.
Nov 29 11:51:25 user.debug kernel: libata version 1.20 loaded.
Nov 29 11:51:25 user.debug kernel: PCI(00:0f.0): version 1.1
Nov 29 11:51:25 user.info kernel: PCI(00:0f.0): routed to hard irq line 5
Nov 29 11:51:25 user.info kernel: ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 5
Nov 29 11:51:25 user.info kernel: ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 5
Nov 29 11:51:25 user.debug kernel: ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
Nov 29 11:51:25 user.info kernel: ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
Nov 29 11:51:25 user.info kernel: ata1: dev 0 configured for UDMA/133
Nov 29 11:51:25 user.info kernel: ata2: no device found (phy stat 00000000)
Nov 29 11:51:25 user.info kernel: scsi1 : sata_via
Nov 29 11:51:25 user.info kernel: scsi2 : sata_via
Nov 29 11:51:25 user.warn kernel: Vendor: ATA Model: ST3500630AS Rev: 3.AA
Nov 29 11:51:25 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 29 11:51:25 user.warn kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Nov 29 11:51:25 user.warn kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 29 11:51:25 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
Nov 29 11:51:25 user.info kernel: raw1394: /dev/raw1394 device initialized
Nov 29 11:51:25 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Nov 29 11:51:25 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Nov 29 11:51:25 user.info kernel: usb.c: registered new driver usbdevfs
Nov 29 11:51:25 user.info kernel: usb.c: registered new driver hub
Nov 29 11:51:25 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Nov 29 11:51:25 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe480, IRQ 5
Nov 29 11:51:25 user.info kernel: b.c: new USB bus registered, assigned bus number 1
Nov 29 11:51:25 user.info kernel: hub.c: USB hub found
Nov 29 11:51:25 user.info kernel: hub.c: 2 ports detected
Nov 29 11:51:25 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe800, IRQ 5
Nov 29 11:51:25 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 29 11:51:25 user.info kernel: hub.c: USB hub found
Nov 29 11:51:25 user.info kernel: hub.c: 2 ports detected
Nov 29 11:51:25 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe880, IRQ 11
Nov 29 11:51:25 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 29 11:51:25 user.info kernel: hub.c: USB hub found
Nov 29 11:51:25 user.info kernel: hub.c: 2 ports detected
Nov 29 11:51:25 user.info kernel: host/uhci.c: USB UHCI at I/O 0xec00, IRQ 11
Nov 29 11:51:25 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 29 11:51:25 user.info kernel: hub.c: USB hub found
Nov 29 11:51:25 user.info kernel: hub.c: 2 ports detected
Nov 29 11:51:25 user.info kernel: usb.c: registered new driver usbkbd
Nov 29 11:51:25 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Nov 29 11:51:25 user.info kernel: Initializing USB Mass Storage driver.
Nov 29 11:51:25 user.info kernel: usb.c: registered new driver usb-storage
Nov 29 11:51:25 user.info kernel: USB Mass Storage support registered.
Nov 29 11:51:25 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 29 11:51:25 user.info kernel: IP Protocols: ICMP, UDP, TCP
Nov 29 11:51:25 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 29 11:51:25 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
Nov 29 11:51:25 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 29 11:51:25 user.notice kernel: RAMDISK: NASLite file system found at block 0
Nov 29 11:51:25 user.warn kernel: <6>hub.c: new USB device 00:10.0-1, assigned address 2
Nov 29 11:51:25 user.warn kernel: .<6>scsi3 : SCSI emulation for USB Mass Storage devices
Nov 29 11:51:25 user.warn kernel: Vendor: Model: USB DISK Pro Rev: PMAP
Nov 29 11:51:25 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 29 11:51:25 user.warn kernel: Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
Nov 29 11:51:25 user.warn kernel: .SCSI device sdb: 1004544 512-byte hdwr sectors (514 MB)
Nov 29 11:51:25 user.warn kernel: .sdb: Write Protect is off
Nov 29 11:51:25 user.info kernel: /dev/scsi/host3/bus0/target0/lun0:. p1
Nov 29 11:51:25 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Nov 29 11:51:25 user.debug kernel: USB Mass Storage device found at 2
Nov 29 11:51:25 user.warn kernel: <6>Freeing initrd memory: 1962k freed
Nov 29 11:51:25 user.warn kernel: VFS: Mounted root (ext2 filesystem).
Nov 29 11:51:25 user.info kernel: Mounted devfs on /dev
Nov 29 11:51:25 user.info kernel: Freeing unused kernel memory: 540k freed
Nov 29 11:51:25 user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Nov 29 11:51:25 user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Nov 29 11:51:25 user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Nov 29 11:51:25 user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Nov 29 11:51:25 user.info kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Nov 29 11:51:25 user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Nov 29 11:51:25 user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Nov 29 11:51:25 user.info kernel: kjournald starting. Commit interval 5 seconds
Nov 29 11:51:25 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Nov 29 11:51:25 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 29 11:51:25 user.info kernel: kjournald starting. Commit interval 5 seconds
Nov 29 11:51:25 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Nov 29 11:51:25 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.


now looking over this, do i have an irq conflict on 5?

Nov 29 11:51:25 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *5 10 11 12 14 15)

then lower down.

Nov 29 11:51:25 user.info kernel: ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 5
Nov 29 11:51:25 user.info kernel: ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 5

also does this mean my pci bus isnt running at full speed?
user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

As u can tell i don't really understand these log very well.
when it says 'user.warn' is that mean a bad thing has happened?



the motherboard, in case it helps.
http://www.asrock.com/mb/overview.asp?Model=P4VM890

many thank for the help!
paul
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Thu Nov 29, 2007 9:57 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
OK, It appears that the problem may be caused by SMART so here are a couple of things to try before getting too involved:

1. In the BIOS enable SMART if available. Reboot and check if the errors disappear. If not, then again in the BIOS, disable SMART and try. In some cases the BIOS settings enables or disables SMART support in the firmware of the drive.

2. In the NASLite-2 admin menu, disable SMART for the drives in question, reboot and check for the errors.

Hope that helps...
Top
 Profile  
 
mrclunk
 Post subject:
PostPosted: Thu Nov 29, 2007 10:15 am 
Offline

Joined: Mon Jan 08, 2007 7:04 pm
Posts: 18
Cheers tony,
What makes u think its SMART? whats the error message, for future reference.

Before reading your post i disconected the ide drive and rebooted. and the msg has gone so it must be something to do with that one.
I'll try your suggestions now.
Top
 Profile  
 
mrclunk
 Post subject:
PostPosted: Thu Nov 29, 2007 10:39 am 
Offline

Joined: Mon Jan 08, 2007 7:04 pm
Posts: 18
Ok, so i had a look in the bios and SMART was disabled for the ide drive.
switched it on and no more errors!
result

is there anything else that i should be concerned about in my log?

THANKS




Quote:
System Message Log:

Nov 29 15:30:43 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
Nov 29 15:30:43 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
Nov 29 15:30:43 user.info kernel: BIOS-provided physical RAM map:
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 0000000000100000 - 000000001dfb0000 (usable)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 000000001dfb0000 - 000000001dfc0000 (ACPI data)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 000000001dfc0000 - 000000001dff0000 (ACPI NVS)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 000000001dff0000 - 000000001e000000 (reserved)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 29 15:30:43 user.warn kernel: BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
Nov 29 15:30:43 user.notice kernel: 0MB HIGHMEM available.
Nov 29 15:30:43 user.notice kernel: 479MB LOWMEM available.
Nov 29 15:30:43 user.warn kernel: On node 0 totalpages: 122800
Nov 29 15:30:43 user.warn kernel: zone(0): 4096 pages.
Nov 29 15:30:43 user.warn kernel: zone(1): 118704 pages.
Nov 29 15:30:43 user.warn kernel: zone(2): 0 pages.
Nov 29 15:30:43 user.info kernel: ACPI: RSDP (v000 ACPIAM ) @ 0x000f84a0
Nov 29 15:30:43 user.info kernel: ACPI: RSDT (v001 A M I OEMRSDT 0x01000719 MSFT 0x00000097) @ 0x1dfb0000
Nov 29 15:30:43 user.info kernel: ACPI: FADT (v002 A M I OEMFACP 0x01000719 MSFT 0x00000097) @ 0x1dfb0200
Nov 29 15:30:43 user.info kernel: ACPI: MADT (v001 A M I OEMAPIC 0x01000719 MSFT 0x00000097) @ 0x1dfb0390
Nov 29 15:30:43 user.info kernel: ACPI: MCFG (v001 A M I OEMMCFG 0x01000719 MSFT 0x00000097) @ 0x1dfb0400
Nov 29 15:30:43 user.info kernel: ACPI: OEMB (v001 A M I AMI_OEM 0x01000719 MSFT 0x00000097) @ 0x1dfc0040
Nov 29 15:30:43 user.info kernel: ACPI: DSDT (v001 P4M89 P4M89130 0x00000130 INTL 0x02002026) @ 0x00000000
Nov 29 15:30:43 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
Nov 29 15:30:43 user.info kernel: Initializing CPU#0
Nov 29 15:30:43 user.warn kernel: Detected 2418.985 MHz processor.
Nov 29 15:30:43 user.warn kernel: Console: colour VGA+ 80x25
Nov 29 15:30:43 user.warn kernel: Calibrating delay loop. 4823.44 BogoMIPS
Nov 29 15:30:43 user.info kernel: Memory: 479412k/491200k available (2214k kernel code, 11400k reserved, 642k data, 540k init, 0k highmem)
Nov 29 15:30:43 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 29 15:30:43 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Nov 29 15:30:43 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 29 15:30:43 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 29 15:30:43 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 29 15:30:43 user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Nov 29 15:30:43 user.info kernel: CPU: L2 cache: 512K
Nov 29 15:30:43 user.debug kernel: CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
Nov 29 15:30:43 user.debug kernel: CPU: Common caps: bfebfbff 00000000 00000000 00000000
Nov 29 15:30:43 user.warn kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Nov 29 15:30:43 user.info kernel: Enabling fast FPU save and restore. done.
Nov 29 15:30:43 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
Nov 29 15:30:43 user.info kernel: Checking 'hlt' instruction. OK.
Nov 29 15:30:43 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Nov 29 15:30:43 user.warn kernel: POSIX conformance testing by UNIFIX
Nov 29 15:30:43 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 29 15:30:43 user.warn kernel: mtrr: detected mtrr type: Intel
Nov 29 15:30:43 user.info kernel: ACPI: Subsystem revision 20040326
Nov 29 15:30:43 user.info kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
Nov 29 15:30:43 user.info kernel: PCI: Using configuration type 1
Nov 29 15:30:43 user.info kernel: ACPI: Interpreter enabled
Nov 29 15:30:43 user.info kernel: ACPI: Using PIC for interrupt routing
Nov 29 15:30:43 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
Nov 29 15:30:43 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Nov 29 15:30:43 user.warn kernel: PCI: Probing PCI hardware (bus 00)
Nov 29 15:30:43 user.info kernel: PCI: Via IRQ fixup
Nov 29 15:30:43 user.info kernel: PCI: Via IRQ fixup
Nov 29 15:30:43 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 29 15:30:43 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Nov 29 15:30:43 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *5 10 11 12 14 15)
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 29 15:30:43 user.info kernel: PCI: Probing PCI hardware
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Nov 29 15:30:43 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Nov 29 15:30:43 user.info kernel: PCI: Using ACPI for IRQ routing
Nov 29 15:30:43 user.info kernel: Linux NET4.0 for Linux 2.4
Nov 29 15:30:43 user.info kernel: upon Swansea University Computer Society NET3.039
Nov 29 15:30:43 user.warn kernel: Initializing RT netlink socket
Nov 29 15:30:43 user.warn kernel: Starting kswapd
Nov 29 15:30:43 user.info kernel: Journalled Block Device driver loaded
Nov 29 15:30:43 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Nov 29 15:30:43 user.info kernel: devfs: boot_options: 0x1
Nov 29 15:30:43 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Nov 29 15:30:43 user.info kernel: ACPI: Power Button (FF) [PWRF]
Nov 29 15:30:43 user.info kernel: ACPI: Processor [CPU1] (supports C1)
Nov 29 15:30:43 user.info kernel: ACPI: Processor [CPU2] (supports C1)
Nov 29 15:30:43 user.warn kernel: pty: 256 Unix98 ptys configured
Nov 29 15:30:43 user.info kernel: Real Time Clock Driver v1.10f
Nov 29 15:30:43 user.warn kernel: floppy0: no floppy controllers found
Nov 29 15:30:43 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Nov 29 15:30:43 user.info kernel: loop: loaded (max 8 devices)
Nov 29 15:30:43 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Nov 29 15:30:43 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
Nov 29 15:30:43 user.info kernel: e1000: 00:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:09:b2:3f
Nov 29 15:30:43 user.info kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Nov 29 15:30:43 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Nov 29 15:30:43 user.warn kernel: FW Version=$Version$
Nov 29 15:30:43 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Nov 29 15:30:43 user.info kernel: ThunderLAN driver v1.15
Nov 29 15:30:43 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Nov 29 15:30:43 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Nov 29 15:30:43 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Nov 29 15:30:43 user.warn kernel: sk98lin: No adapter found.
Nov 29 15:30:43 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Nov 29 15:30:43 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 29 15:30:43 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 29 15:30:43 user.info kernel: VP_IDE: IDE controller at PCI slot 00:0f.1
Nov 29 15:30:43 user.info kernel: VP_IDE: chipset revision 6
Nov 29 15:30:43 user.info kernel: VP_IDE: not 100% native mode: will probe irqs later
Nov 29 15:30:43 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 29 15:30:43 user.info kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci00:0f.1
Nov 29 15:30:43 user.info kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Nov 29 15:30:43 user.info kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Nov 29 15:30:43 user.warn kernel: hda: Maxtor 6K040L0, ATA DISK drive
Nov 29 15:30:43 user.warn kernel: hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive
Nov 29 15:30:43 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 29 15:30:43 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 29 15:30:43 user.warn kernel: hda: attached ide-disk driver.
Nov 29 15:30:43 user.warn kernel: hda: host protected area => 1
Nov 29 15:30:43 user.info kernel: hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(133)
Nov 29 15:30:43 user.info kernel: Partition check:
Nov 29 15:30:43 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1
Nov 29 15:30:43 user.info kernel: SCSI subsystem driver Revision: 1.00
Nov 29 15:30:43 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Nov 29 15:30:43 user.info kernel: Detecting Adaptec I2O RAID controllers.
Nov 29 15:30:43 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
Nov 29 15:30:43 user.warn kernel: scsi: Detection failed (no card)
Nov 29 15:30:43 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Nov 29 15:30:43 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Nov 29 15:30:43 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Nov 29 15:30:43 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Nov 29 15:30:43 user.warn kernel: 3w-xxxx: No cards found.
Nov 29 15:30:43 user.debug kernel: libata version 1.20 loaded.
Nov 29 15:30:43 user.debug kernel: PCI(00:0f.0): version 1.1
Nov 29 15:30:43 user.info kernel: PCI(00:0f.0): routed to hard irq line 5
Nov 29 15:30:43 user.info kernel: ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 5
Nov 29 15:30:43 user.info kernel: ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 5
Nov 29 15:30:43 user.debug kernel: ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
Nov 29 15:30:43 user.info kernel: ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
Nov 29 15:30:43 user.info kernel: ata1: dev 0 configured for UDMA/133
Nov 29 15:30:43 user.info kernel: ata2: no device found (phy stat 00000000)
Nov 29 15:30:43 user.info kernel: scsi1 : sata_via
Nov 29 15:30:43 user.info kernel: scsi2 : sata_via
Nov 29 15:30:43 user.warn kernel: Vendor: ATA Model: ST3500630AS Rev: 3.AA
Nov 29 15:30:43 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 29 15:30:43 user.warn kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Nov 29 15:30:43 user.warn kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 29 15:30:43 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
Nov 29 15:30:43 user.info kernel: raw1394: /dev/raw1394 device initialized
Nov 29 15:30:43 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Nov 29 15:30:43 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Nov 29 15:30:43 user.info kernel: usb.c: registered new driver usbdevfs
Nov 29 15:30:43 user.info kernel: usb.c: registered new driver hub
Nov 29 15:30:43 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Nov 29 15:30:43 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe480, IRQ 5
Nov 29 15:30:43 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 29 15:30:43 user.info kernel: hub.c: USB hub found
Nov 29 15:30:43 user.info kernel: hub.c: 2 ports detected
Nov 29 15:30:43 user.info kernel: 800, IRQ 5
Nov 29 15:30:43 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 29 15:30:43 user.info kernel: hub.c: USB hub found
Nov 29 15:30:43 user.info kernel: hub.c: 2 ports detected
Nov 29 15:30:43 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe880, IRQ 11
Nov 29 15:30:43 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 29 15:30:43 user.info kernel: hub.c: USB hub found
Nov 29 15:30:43 user.info kernel: hub.c: 2 ports detected
Nov 29 15:30:43 user.info kernel: host/uhci.c: USB UHCI at I/O 0xec00, IRQ 11
Nov 29 15:30:43 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 29 15:30:43 user.info kernel: hub.c: USB hub found
Nov 29 15:30:43 user.info kernel: hub.c: 2 ports detected
Nov 29 15:30:43 user.info kernel: usb.c: registered new driver usbkbd
Nov 29 15:30:43 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Nov 29 15:30:43 user.info kernel: Initializing USB Mass Storage driver.
Nov 29 15:30:43 user.info kernel: usb.c: registered new driver usb-storage
Nov 29 15:30:43 user.info kernel: USB Mass Storage support registered.
Nov 29 15:30:43 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 29 15:30:43 user.info kernel: IP Protocols: ICMP, UDP, TCP
Nov 29 15:30:43 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 29 15:30:43 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
Nov 29 15:30:43 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 29 15:30:43 user.notice kernel: RAMDISK: NASLite file system found at block 0
Nov 29 15:30:43 user.warn kernel: <6>hub.c: new USB device 00:10.0-1, assigned address 2
Nov 29 15:30:43 user.warn kernel: .<6>scsi3 : SCSI emulation for USB Mass Storage devices
Nov 29 15:30:43 user.warn kernel: Vendor: Model: USB DISK Pro Rev: PMAP
Nov 29 15:30:43 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 29 15:30:43 user.warn kernel: Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
Nov 29 15:30:43 user.warn kernel: .SCSI device sdb: 1004544 512-byte hdwr sectors (514 MB)
Nov 29 15:30:43 user.warn kernel: .sdb: Write Protect is off
Nov 29 15:30:43 user.info kernel: /dev/scsi/host3/bus0/target0/lun0:. p1
Nov 29 15:30:43 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Nov 29 15:30:43 user.debug kernel: USB Mass Storage device found at 2
Nov 29 15:30:43 user.warn kernel: <6>Freeing initrd memory: 1962k freed
Nov 29 15:30:43 user.warn kernel: VFS: Mounted root (ext2 filesystem).
Nov 29 15:30:43 user.info kernel: Mounted devfs on /dev
Nov 29 15:30:43 user.info kernel: Freeing unused kernel memory: 540k freed
Nov 29 15:30:43 user.info kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Nov 29 15:30:43 user.info kernel: kjournald starting. Commit interval 5 seconds
Nov 29 15:30:43 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Nov 29 15:30:43 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 29 15:30:43 user.info kernel: kjournald starting. Commit interval 5 seconds
Nov 29 15:30:43 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Nov 29 15:30:43 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Thu Nov 29, 2007 12:51 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
If the BIOS disables SMART at the firmware level, the drive will not respond properly to the SMART probe request generated by NASLite-2, hence the errors you see.

The syslog looks good. If there are problems, NASLite will usually complain plenty so you'll see abnormal messages that will provide a clue or two. :wink:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 12 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group