NASLite Network Attached Storage

Oops.. should of posted this in the hardware section. Mods, care to move it? THanks! and, sorry!

Hi, I just upgrade to the HDD version and man, its cool! Love the web interface! much better!!

Got a question, I have no problems with my internal drives, one USB drive (WD 500 gig) works great and was seen by the system no problems.

My other USB drive is not seen by naslite. Its a Acomdata 320 gig. The drive never shows up in the admin console.

When the server is turned on, it hits the drive, while booting I see one flash and I dont see anymore activity. and I never see the drive show up. the drive is working just fine (tested on another server).

Thanks!!

Here is the log. Hope this isnt too much data.

========================================

Nov 12 23:37:27 user.info kernel: usb.c: registered new driver usbdevfs
Nov 12 23:37:27 user.info kernel: usb.c: registered new driver hub
Nov 12 23:37:27 user.info kernel: ehci_hcd 00:10.3: PCI device 1106:3104
Nov 12 23:37:27 user.info kernel: ehci_hcd 00:10.3: irq 5, pci mem e0809000
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 12 23:37:27 user.info kernel: ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 6 ports detected
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd000, IRQ 11
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 2 ports detected
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd400, IRQ 3
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 2 ports detected
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd800, IRQ 10
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 2 ports detected
Nov 12 23:37:27 user.info kernel: usb.c: registered new driver usbkbd
Nov 12 23:37:27 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Nov 12 23:37:27 user.info kernel: Initializing USB Mass Storage driver.
Nov 12 23:37:27 user.info kernel: usb.c: registered new driver usb-storage
Nov 12 23:37:27 user.info kernel: USB Mass Storage support registered.
Nov 12 23:37:27 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 12 23:37:27 user.info kernel: IP Protocols: ICMP, UDP, TCP
Nov 12 23:37:27 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 12 23:37:27 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
Nov 12 23:37:27 user.info kernel: in sockets 1.0/SMP for Linux NET4.0.
Nov 12 23:37:27 user.notice kernel: RAMDISK: NASLite file system found at block 0
Nov 12 23:37:27 user.warn kernel: <6>hub.c: new USB device 00:10.3-1, assigned address 2
Nov 12 23:37:27 user.warn kernel: <6>scsi1 : SCSI emulation for USB Mass Storage devices
Nov 12 23:37:27 user.warn kernel: Vendor: Model: Rev:
Nov 12 23:37:27 user.warn kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 12 23:37:27 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Nov 12 23:37:27 user.debug kernel: USB Mass Storage device found at 2
Nov 12 23:37:27 user.warn kernel: .<6>hub.c: new USB device 00:10.3-4, assigned address 3
Nov 12 23:37:27 user.warn kernel: .<6>scsi2 : SCSI emulation for USB Mass Storage devices
Nov 12 23:37:27 user.warn kernel: <6>Freeing initrd memory: 1962k freed
Nov 12 23:37:27 user.warn kernel: VFS: Mounted root (ext2 filesystem).
Nov 12 23:37:27 user.info kernel: Mounted devfs on /dev
Nov 12 23:37:27 user.info kernel: Freeing unused kernel memory: 540k freed
Nov 12 23:37:27 user.warn kernel: Vendor: WD Model: 5000AAKS Externa Rev: 101a
Nov 12 23:37:27 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 12 23:37:27 user.warn kernel: Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Nov 12 23:37:27 user.warn kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 12 23:37:27 user.info kernel: /dev/scsi/host2/bus0/target0/lun0: p1
Nov 12 23:37:27 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Nov 12 23:37:27 user.debug kernel: USB Mass Storage device found at 3
Nov 12 23:37:27 user.info kernel: eth0: Setting full-duplex based on MII #1 link partner capability of cde1.
Nov 12 23:37:27 user.err kernel: ext3: No journal on filesystem on ide0(3,65)
Nov 12 23:37:27 user.err kernel: ext3: No journal on filesystem on sd(8,1)
Nov 12 23:37:48 user.info kernel: usb.c: USB disconnect on device 00:10.3-1 address 2

Can you post the entire syslog?

Hi Tony,, THanks! here is the list: Much appreciated you lookin it over.

Nov 12 23:37:27 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
Nov 12 23:37:27 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
Nov 12 23:37:27 user.info kernel: BIOS-provided physical RAM map:
Nov 12 23:37:27 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 12 23:37:27 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 12 23:37:27 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 12 23:37:27 user.warn kernel: BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Nov 12 23:37:27 user.warn kernel: BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Nov 12 23:37:27 user.warn kernel: BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Nov 12 23:37:27 user.warn kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Nov 12 23:37:27 user.notice kernel: 0MB HIGHMEM available.
Nov 12 23:37:27 user.notice kernel: 511MB LOWMEM available.
Nov 12 23:37:27 user.warn kernel: On node 0 totalpages: 131056
Nov 12 23:37:27 user.warn kernel: zone(0): 4096 pages.
Nov 12 23:37:27 user.warn kernel: zone(1): 126960 pages.
Nov 12 23:37:27 user.warn kernel: zone(2): 0 pages.
Nov 12 23:37:27 user.info kernel: ACPI: RSDP (v000 VIA694 ) @ 0x000f6a20
Nov 12 23:37:27 user.info kernel: ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
Nov 12 23:37:27 user.info kernel: ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
Nov 12 23:37:27 user.info kernel: ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Nov 12 23:37:27 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
Nov 12 23:37:27 user.info kernel: Initializing CPU#0
Nov 12 23:37:27 user.warn kernel: Detected 2073.235 MHz processor.
Nov 12 23:37:27 user.warn kernel: Console: colour VGA+ 80x25
Nov 12 23:37:27 user.warn kernel: Calibrating delay loop. 4128.76 BogoMIPS
Nov 12 23:37:27 user.info kernel: Memory: 512048k/524224k available (2214k kernel code, 11788k reserved, 642k data, 540k init, 0k highmem)
Nov 12 23:37:27 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 12 23:37:27 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Nov 12 23:37:27 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 12 23:37:27 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 12 23:37:27 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 12 23:37:27 user.info kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 12 23:37:27 user.info kernel: CPU: L2 Cache: 512K (64 bytes/line)
Nov 12 23:37:27 user.debug kernel: CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000
Nov 12 23:37:27 user.debug kernel: CPU: Common caps: 0383f9ff c1c3f9ff 00000000 00000000
Nov 12 23:37:27 user.warn kernel: CPU: AMD Athlon(tm) XP 2800+ stepping 00
Nov 12 23:37:27 user.info kernel: Enabling fast FPU save and restore. done.
Nov 12 23:37:27 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
Nov 12 23:37:27 user.info kernel: Checking 'hlt' instruction. OK.
Nov 12 23:37:27 user.warn kernel: ACPI: IRQ9 SCI: Level Trigger.
Nov 12 23:37:27 user.warn kernel: POSIX conformance testing by UNIFIX
Nov 12 23:37:27 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 12 23:37:27 user.warn kernel: mtrr: detected mtrr type: Intel
Nov 12 23:37:27 user.info kernel: ACPI: Subsystem revision 20040326
Nov 12 23:37:27 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
Nov 12 23:37:27 user.info kernel: PCI: Using configuration type 1
Nov 12 23:37:27 user.info kernel: ACPI: Interpreter enabled
Nov 12 23:37:27 user.info kernel: ACPI: Using PIC for interrupt routing
Nov 12 23:37:27 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
Nov 12 23:37:27 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Nov 12 23:37:27 user.warn kernel: PCI: Probing PCI hardware (bus 00)
Nov 12 23:37:27 user.info kernel: PCI: Via IRQ fixup
Nov 12 23:37:27 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Nov 12 23:37:27 user.info kernel: PCI: Probing PCI hardware
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Nov 12 23:37:27 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
Nov 12 23:37:27 user.info kernel: PCI: Using ACPI for IRQ routing
Nov 12 23:37:27 user.info kernel: Linux NET4.0 for Linux 2.4
Nov 12 23:37:27 user.info kernel: Based upon Swansea University Computer Society NET3.039
Nov 12 23:37:27 user.warn kernel: Initializing RT netlink socket
Nov 12 23:37:27 user.warn kernel: Starting kswapd
Nov 12 23:37:27 user.info kernel: Journalled Block Device driver loaded
Nov 12 23:37:27 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Nov 12 23:37:27 user.info kernel: devfs: boot_options: 0x1
Nov 12 23:37:27 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Nov 12 23:37:27 user.info kernel: ACPI: Power Button (FF) [PWRF]
Nov 12 23:37:27 user.info kernel: ACPI: Sleep Button (CM) [SLPB]
Nov 12 23:37:27 user.info kernel: ACPI: Fan [FAN] (on)
Nov 12 23:37:27 user.info kernel: ACPI: Processor [CPU0] (supports C1 C2)
Nov 12 23:37:27 user.info kernel: ACPI: Thermal Zone [THRM] (40 C)
Nov 12 23:37:27 user.warn kernel: pty: 256 Unix98 ptys configured
Nov 12 23:37:27 user.info kernel: Real Time Clock Driver v1.10f
Nov 12 23:37:27 user.warn kernel: keyboard: Timeout - AT keyboard not present?(ed)
Nov 12 23:37:27 user.warn kernel: keyboard: Timeout - AT keyboard not present?(f4)
Nov 12 23:37:27 user.info kernel: FDC 0 is a post-1991 82077
Nov 12 23:37:27 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Nov 12 23:37:27 user.info kernel: loop: loaded (max 8 devices)
Nov 12 23:37:27 user.info kernel: ersion 7.3.20-k4
Nov 12 23:37:27 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
Nov 12 23:37:27 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Nov 12 23:37:27 user.warn kernel: FW Version=$Version$
Nov 12 23:37:27 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Nov 12 23:37:27 user.info kernel: ThunderLAN driver v1.15
Nov 12 23:37:27 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Nov 12 23:37:27 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Nov 12 23:37:27 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Nov 12 23:37:27 user.warn kernel: sk98lin: No adapter found.
Nov 12 23:37:27 user.info kernel: via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
Nov 12 23:37:27 user.info kernel: http://www.scyld.com/network/via-rhine.html
Nov 12 23:37:27 user.info kernel: eth0: VIA VT6102 Rhine-II at 0xe400, 00:0d:87:92:9c:45, IRQ 11.
Nov 12 23:37:27 user.info kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1.
Nov 12 23:37:27 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Nov 12 23:37:27 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Nov 12 23:37:27 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 12 23:37:27 user.info kernel: VP_IDE: IDE controller at PCI slot 00:11.1
Nov 12 23:37:27 user.info kernel: VP_IDE: chipset revision 6
Nov 12 23:37:27 user.info kernel: VP_IDE: not 100% native mode: will probe irqs later
Nov 12 23:37:27 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 12 23:37:27 user.info kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
Nov 12 23:37:27 user.info kernel: ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
Nov 12 23:37:27 user.info kernel: ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio
Nov 12 23:37:27 user.warn kernel: hda: WDC AC14300R, ATA DISK drive
Nov 12 23:37:27 user.warn kernel: hdb: ST3120026A, ATA DISK drive
Nov 12 23:37:27 user.warn kernel: hdc: CREATIVE CD5233E-N, ATAPI CD/DVD-ROM drive
Nov 12 23:37:27 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 12 23:37:27 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 12 23:37:27 user.warn kernel: hda: attached ide-disk driver.
Nov 12 23:37:27 user.warn kernel: hda: host protected area => 1
Nov 12 23:37:27 user.warn kernel: hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Nov 12 23:37:27 user.warn kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError }
Nov 12 23:37:27 user.info kernel: hda: 8421840 sectors (4312 MB) w/512KiB Cache, CHS=557/240/63
Nov 12 23:37:27 user.warn kernel: hdb: attached ide-disk driver.
Nov 12 23:37:27 user.warn kernel: hdb: host protected area => 1
Nov 12 23:37:27 user.info kernel: hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
Nov 12 23:37:27 user.info kernel: Partition check:
Nov 12 23:37:27 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2
Nov 12 23:37:27 user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
Nov 12 23:37:27 user.info kernel: SCSI subsystem driver Revision: 1.00
Nov 12 23:37:27 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Nov 12 23:37:27 user.info kernel: Detecting Adaptec I2O RAID controllers.
Nov 12 23:37:27 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
Nov 12 23:37:27 user.warn kernel: scsi: Detection failed (no card)
Nov 12 23:37:27 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Nov 12 23:37:27 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Nov 12 23:37:27 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Nov 12 23:37:27 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Nov 12 23:37:27 user.warn kernel: 3w-xxxx: No cards found.
Nov 12 23:37:27 user.debug kernel: libata version 1.20 loaded.
Nov 12 23:37:27 user.info kernel: raw1394: /dev/raw1394 device initialized
Nov 12 23:37:27 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Nov 12 23:37:27 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Nov 12 23:37:27 user.info kernel: usb.c: registered new driver usbdevfs
Nov 12 23:37:27 user.info kernel: usb.c: registered new driver hub
Nov 12 23:37:27 user.info kernel: ehci_hcd 00:10.3: PCI device 1106:3104
Nov 12 23:37:27 user.info kernel: ehci_hcd 00:10.3: irq 5, pci mem e0809000
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 12 23:37:27 user.info kernel: ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 6 ports detected
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd000, IRQ 11
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 2 ports detected
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd400, IRQ 3
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 2 ports detected
Nov 12 23:37:27 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd800, IRQ 10
Nov 12 23:37:27 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
Nov 12 23:37:27 user.info kernel: hub.c: USB hub found
Nov 12 23:37:27 user.info kernel: hub.c: 2 ports detected
Nov 12 23:37:27 user.info kernel: usb.c: registered new driver usbkbd
Nov 12 23:37:27 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Nov 12 23:37:27 user.info kernel: Initializing USB Mass Storage driver.
Nov 12 23:37:27 user.info kernel: usb.c: registered new driver usb-storage
Nov 12 23:37:27 user.info kernel: USB Mass Storage support registered.
Nov 12 23:37:27 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 12 23:37:27 user.info kernel: IP Protocols: ICMP, UDP, TCP
Nov 12 23:37:27 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 12 23:37:27 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
Nov 12 23:37:27 user.info kernel: in sockets 1.0/SMP for Linux NET4.0.
Nov 12 23:37:27 user.notice kernel: RAMDISK: NASLite file system found at block 0
Nov 12 23:37:27 user.warn kernel: <6>hub.c: new USB device 00:10.3-1, assigned address 2
Nov 12 23:37:27 user.warn kernel: <6>scsi1 : SCSI emulation for USB Mass Storage devices
Nov 12 23:37:27 user.warn kernel: Vendor: Model: Rev:
Nov 12 23:37:27 user.warn kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 12 23:37:27 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Nov 12 23:37:27 user.debug kernel: USB Mass Storage device found at 2
Nov 12 23:37:27 user.warn kernel: .<6>hub.c: new USB device 00:10.3-4, assigned address 3
Nov 12 23:37:27 user.warn kernel: .<6>scsi2 : SCSI emulation for USB Mass Storage devices
Nov 12 23:37:27 user.warn kernel: <6>Freeing initrd memory: 1962k freed
Nov 12 23:37:27 user.warn kernel: VFS: Mounted root (ext2 filesystem).
Nov 12 23:37:27 user.info kernel: Mounted devfs on /dev
Nov 12 23:37:27 user.info kernel: Freeing unused kernel memory: 540k freed
Nov 12 23:37:27 user.warn kernel: Vendor: WD Model: 5000AAKS Externa Rev: 101a
Nov 12 23:37:27 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 12 23:37:27 user.warn kernel: Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Nov 12 23:37:27 user.warn kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 12 23:37:27 user.info kernel: /dev/scsi/host2/bus0/target0/lun0: p1
Nov 12 23:37:27 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Nov 12 23:37:27 user.debug kernel: USB Mass Storage device found at 3
Nov 12 23:37:27 user.info kernel: eth0: Setting full-duplex based on MII #1 link partner capability of cde1.
Nov 12 23:37:27 user.err kernel: ext3: No journal on filesystem on ide0(3,65)
Nov 12 23:37:27 user.err kernel: ext3: No journal on filesystem on sd(8,1)
Nov 12 23:37:48 user.info kernel: usb.c: USB disconnect on device 00:10.3-1 address 2
Nov 13 00:14:08 user.warn kernel: spurious 8259A interrupt: IRQ7.

Couple of things:

1. In the BIOS disable things like audio, LPT and COM ports, etc. That will clear some IRQs that USB may be asking for.

2. Make sure that the drive is connected directly to the computer and not through a USB hub. Also, you may try disabling USB2 in the BIOS for testing purposes.

Hope that helps...

I will do this in a few minutes! Thank you! I will update with my results.

regarding #2, no external hub is in use

#1. Disabled all extra devices, LTP Coms etc.. Also disabled keyboard Mouse USB support,

#2. disabled USB 2.0, left legacy on. set escd data to manual, and auto

all the changes made no effect what so ever! I think I wil go buy another WD book USB drive! and move onward. I am starting to think the acomdata drive does not play nice with the ECS K7TVA3 system boards USB... ? the WD Drive talks a little but the acomdata, does a blip and this thats it.

I will try another WD drive in a few days.

Thanks for the assistance! I have 700 gig online and I am doing OK. extra drive isnt a " gotta have it" situation.

I might mess with the acomdata usb on another machine just to see what happens. ( with my old CD version of naslite)