Maxxarcade wrote:
What are your system specs? That is a very high speed, I usually get 11-25MB/sec on mine, with an Athlon XP 2200+ and 7200RPM ATA100 drives.
Dell GX260?
P4 2.4 ghz
2 GB RAM
onboard gigabit enet
DLink 655 gigabit/802.11/n router
2x WD "Green" 1 TB SATA drives on the onboard SATA
2x WD something or other cheap 500 GB 7200 RPM PATA drives on the two separate onboard PATA
see this thread:
viewtopic.php?f=5&t=2383&st=0&sk=t&sd=athe following is my results from one machine, to actually max out the gigabit network, i need two clients connected to 2 separate disks in the NASLite server (i max out a single drive's throughput far before i max out my 1000bT network)
$ ./diskwriggler -NTSC -C -t -n 2500 -o /Volumes/Disk-1
Frame Resolution : 720 x 486
Bytes / Pixel : 2.00 (packed) (8 bit, 4:2:2 sampling)
Frame Size : 699,840 bytes
File Type : All frames in one container file (1,749,600,000 bytes).
Writing 2500 x 699840 byte frames into file /Volumes/Disk-1/framestream.dat
576 frames in 5.01 secs ==> 115.05 FPS (76.79 MB/s)
635 frames in 5.00 secs ==> 126.95 FPS (84.73 MB/s)
36 frames in 6.23 secs ==> 5.78 FPS (3.86 MB/s)
623 frames in 5.03 secs ==> 123.87 FPS (82.67 MB/s)
571 frames in 14.45 secs ==> 39.52 FPS (26.37 MB/s)
59 frames in 0.47 secs ==> 124.73 FPS (83.25 MB/s)
Write Summary : 2500.00 frames in 36.19 secs
: 5.78(min) 69.07(avg) 126.95(max) FPS
: 3.86(min) 46.10(avg) 84.73(max) MB/s
Reading 2500 x 699840 byte frames from file /Volumes/Disk-1/framestream.dat
281 frames in 5.03 secs ==> 55.89 FPS (37.30 MB/s)
420 frames in 5.00 secs ==> 83.93 FPS (56.02 MB/s)
420 frames in 5.03 secs ==> 83.52 FPS (55.74 MB/s)
411 frames in 5.01 secs ==> 82.00 FPS (54.73 MB/s)
417 frames in 5.02 secs ==> 83.02 FPS (55.41 MB/s)
352 frames in 5.16 secs ==> 68.23 FPS (45.54 MB/s)
199 frames in 2.10 secs ==> 94.86 FPS (63.31 MB/s)
Read Summary : 2500.00 frames in 32.35 secs
: 55.89(min) 77.27(avg) 94.86(max) FPS
: 37.30(min) 51.57(avg) 63.31(max) MB/s