NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Sun May 04, 2025 8:26 am

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 24 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
gaiden
 Post subject:
PostPosted: Sun Nov 19, 2006 9:24 am 
Offline

Joined: Sun Jul 09, 2006 10:26 am
Posts: 428
Location: UK
I am a little busy right now, But as soon as I am done, i''l post the wiggler info and the card, hardware. etc.
Top
 Profile  
 
gaiden
 Post subject:
PostPosted: Sun Nov 19, 2006 1:18 pm 
Offline

Joined: Sun Jul 09, 2006 10:26 am
Posts: 428
Location: UK
F:\disk>diskwriggler -NTSC -C -t -n 2000 -o \\192.168.0.253\disk-0
Frame Resolution : 720 x 486
Bytes / Pixel : 2.00 (packed) (8 bit, 4:2:2 sampling)
Frame Size : 699,840 bytes
File Type : All frames in one container file (1,399,680,000 bytes).

Writing 2000 x 699840 byte frames into file \\192.168.0.253\disk-0/framestream.d
at
73 frames in 5.03 secs ==> 14.52 FPS (9.69 MB/s)
76 frames in 5.04 secs ==> 15.09 FPS (10.07 MB/s)
74 frames in 5.05 secs ==> 14.66 FPS (9.79 MB/s)
78 frames in 5.04 secs ==> 15.48 FPS (10.33 MB/s)
77 frames in 5.07 secs ==> 15.20 FPS (10.14 MB/s)
77 frames in 5.06 secs ==> 15.23 FPS (10.16 MB/s)
65 frames in 5.06 secs ==> 12.85 FPS (8.58 MB/s)
66 frames in 5.02 secs ==> 13.15 FPS (8.78 MB/s)
77 frames in 5.05 secs ==> 15.26 FPS (10.18 MB/s)
62 frames in 5.01 secs ==> 12.38 FPS (8.26 MB/s)
74 frames in 5.03 secs ==> 14.72 FPS (9.82 MB/s)
78 frames in 5.06 secs ==> 15.42 FPS (10.29 MB/s)
62 frames in 5.05 secs ==> 12.28 FPS (8.20 MB/s)
79 frames in 5.06 secs ==> 15.62 FPS (10.43 MB/s)
77 frames in 5.04 secs ==> 15.29 FPS (10.20 MB/s)
68 frames in 5.03 secs ==> 13.53 FPS (9.03 MB/s)
66 frames in 5.06 secs ==> 13.05 FPS (8.71 MB/s)
67 frames in 5.05 secs ==> 13.27 FPS (8.86 MB/s)
66 frames in 5.01 secs ==> 13.18 FPS (8.80 MB/s)
66 frames in 5.01 secs ==> 13.18 FPS (8.80 MB/s)
77 frames in 5.05 secs ==> 15.26 FPS (10.18 MB/s)
64 frames in 5.03 secs ==> 12.73 FPS (8.50 MB/s)
77 frames in 5.06 secs ==> 15.23 FPS (10.16 MB/s)
64 frames in 5.01 secs ==> 12.78 FPS (8.53 MB/s)
79 frames in 5.05 secs ==> 15.65 FPS (10.45 MB/s)
62 frames in 5.03 secs ==> 12.33 FPS (8.23 MB/s)
78 frames in 5.03 secs ==> 15.52 FPS (10.36 MB/s)
68 frames in 5.17 secs ==> 13.16 FPS (8.78 MB/s)
3 frames in 0.19 secs ==> 15.77 FPS (10.52 MB/s)

Write Summary : 2000.00 frames in 141.38 secs
: 12.28(min) 14.15(avg) 15.77(max) FPS
: 8.20(min) 9.44(avg) 10.52(max) MB/s

The FA311 network card in on the 2nd pci slot, the AGP and 1st pci share the IRQ's there is no sound card and 512mb ram. a single 80GB hard drive on the primary ide. boots with a kicker then to usb.

loaded optimal defaults and turned off raid. going to clear the cmos and make notes and see if what I get..

But during my tests diskwriggler failed when i went to far much like what was happening to you.

Oh and it has the latest Bios.
Top
 Profile  
 
superboss
 Post subject:
PostPosted: Sun Nov 19, 2006 4:47 pm 
Offline

Joined: Sun Sep 24, 2006 1:32 pm
Posts: 290
Thx for the effort gaiden! My numbers are totally random and can start off with complete halt only to race up to 11MB/s... I'm not a person who usually gives up but I've had it with this issue.

Quote:
Frame Resolution : 720 x 486
Bytes / Pixel : 2,00 (packed) (8 bit, 4:2:2 sampling)
Frame Size : 699,840 bytes
File Type : All frames in one container file (1,399,680,000 bytes).

Writing 2000 x 699840 byte frames into file \\192.168.0.11\disk-0/framestream.da
t
82 frames in 5,02 secs ==> 16,35 FPS (10,91 MB/s)
83 frames in 9,03 secs ==> 9,19 FPS (6,13 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
42 frames in 5,05 secs ==> 8,32 FPS (5,55 MB/s)
62 frames in 5,03 secs ==> 12,32 FPS (8,22 MB/s)
15 frames in 7,53 secs ==> 1,99 FPS (1,33 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
83 frames in 5,05 secs ==> 16,45 FPS (10,98 MB/s)
50 frames in 5,00 secs ==> 10,00 FPS (6,67 MB/s)
15 frames in 5,03 secs ==> 2,98 FPS (1,99 MB/s)
^C
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Sun Nov 19, 2006 5:12 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
I've been following this one, but have nothing to contribute since nether Ralph nor I have experience with that board. My bet would have been IRQs since the results seem to be erratic. The ACPI being hardwired on is pretty lame too. :wink:
Top
 Profile  
 
gaiden
 Post subject:
PostPosted: Sun Nov 19, 2006 6:34 pm 
Offline

Joined: Sun Jul 09, 2006 10:26 am
Posts: 428
Location: UK
I only had a problem when I messed to much with the bios settings.

Superboss i'd load optimal defaults set the cpu up and disable the onboard raid and leave the rest. maybe clear the cmos and start over.

could you have disabled to much in the bios, You see this board KT7AR I have been using has had all flavours of naslite and undergone a fair amount of testing with naslite and the only time i got a write failure was when i went in to the bios and messed around.

Just going to clear my cmos and make notes of the things I change in the bios.
Top
 Profile  
 
gaiden
 Post subject:
PostPosted: Sun Nov 19, 2006 6:52 pm 
Offline

Joined: Sun Jul 09, 2006 10:26 am
Posts: 428
Location: UK
Ok cleared CMOS setup the cpu, clock, disabled raid controller. and thats all then ran disk wriggler again.

F:\disk>diskwriggler -NTSC -C -t -n 2000 -o \\192.168.0.253\disk-0
Frame Resolution : 720 x 486
Bytes / Pixel : 2.00 (packed) (8 bit, 4:2:2 sampling)
Frame Size : 699,840 bytes
File Type : All frames in one container file (1,399,680,000 bytes).

Writing 2000 x 699840 byte frames into file \\192.168.0.253\disk-0/framestream.d
at
71 frames in 5.04 secs ==> 14.10 FPS (9.41 MB/s)
61 frames in 5.06 secs ==> 12.06 FPS (8.05 MB/s)
75 frames in 5.05 secs ==> 14.86 FPS (9.92 MB/s)
59 frames in 5.02 secs ==> 11.76 FPS (7.85 MB/s)
76 frames in 5.05 secs ==> 15.06 FPS (10.05 MB/s)
76 frames in 5.06 secs ==> 15.03 FPS (10.03 MB/s)
76 frames in 5.06 secs ==> 15.03 FPS (10.03 MB/s)
75 frames in 5.03 secs ==> 14.92 FPS (9.96 MB/s)
73 frames in 5.04 secs ==> 14.49 FPS (9.67 MB/s)
64 frames in 5.04 secs ==> 12.71 FPS (8.48 MB/s)
78 frames in 5.05 secs ==> 15.45 FPS (10.31 MB/s)
76 frames in 5.05 secs ==> 15.06 FPS (10.05 MB/s)
76 frames in 5.04 secs ==> 15.09 FPS (10.07 MB/s)
64 frames in 5.01 secs ==> 12.78 FPS (8.53 MB/s)
65 frames in 5.02 secs ==> 12.96 FPS (8.65 MB/s)
74 frames in 5.03 secs ==> 14.72 FPS (9.82 MB/s)
78 frames in 5.03 secs ==> 15.52 FPS (10.36 MB/s)
64 frames in 5.06 secs ==> 12.66 FPS (8.45 MB/s)
64 frames in 5.02 secs ==> 12.76 FPS (8.51 MB/s)
73 frames in 5.01 secs ==> 14.58 FPS (9.73 MB/s)
76 frames in 5.03 secs ==> 15.12 FPS (10.09 MB/s)
76 frames in 5.01 secs ==> 15.18 FPS (10.13 MB/s)
63 frames in 5.01 secs ==> 12.58 FPS (8.40 MB/s)
67 frames in 5.03 secs ==> 13.33 FPS (8.89 MB/s)
66 frames in 5.03 secs ==> 13.13 FPS (8.76 MB/s)
76 frames in 5.02 secs ==> 15.15 FPS (10.11 MB/s)
63 frames in 5.04 secs ==> 12.51 FPS (8.35 MB/s)
65 frames in 5.01 secs ==> 12.98 FPS (8.66 MB/s)
30 frames in 2.02 secs ==> 14.83 FPS (9.90 MB/s)

Write Summary : 2000.00 frames in 142.90 secs
: 11.76(min) 14.00(avg) 15.52(max) FPS
: 7.85(min) 9.34(avg) 10.36(max) MB/s
Top
 Profile  
 
superboss
 Post subject:
PostPosted: Mon Nov 20, 2006 3:50 am 
Offline

Joined: Sun Sep 24, 2006 1:32 pm
Posts: 290
gaiden wrote:
I only had a problem when I messed to much with the bios settings.

Superboss i'd load optimal defaults set the cpu up and disable the onboard raid and leave the rest. maybe clear the cmos and start over.

could you have disabled to much in the bios, You see this board KT7AR I have been using has had all flavours of naslite and undergone a fair amount of testing with naslite and the only time i got a write failure was when i went in to the bios and messed around.

Just going to clear my cmos and make notes of the things I change in the bios.


Yeah I cleared the CMOS and loaded optimal defaults but to no use. I still get the same random numbers. I will try moving the raidcard + nic into another box I have and see if that helps at all. If not, it must be the raid card. I appreciate your help!
Top
 Profile  
 
superboss
 Post subject:
PostPosted: Mon Nov 20, 2006 4:28 am 
Offline

Joined: Sun Sep 24, 2006 1:32 pm
Posts: 290
Popped the drives + raidcard + nic into an IBM Aptiva K6-2 500MHz:

Quote:
* Nov 20 09:21:50 syslog.info syslogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
* Nov 20 09:21:50 daemon.info init: ^MStarting pid 1516, console /dev/null: '/sbin/klogd'
* Nov 20 09:21:50 user.notice kernel: klogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
* Nov 20 09:21:50 user.warn kernel: Linux version 2.4.33.NASLite (root@TZT) (gcc version 3.3.6) #1 Tue Aug 15 01:08:13 UTC 2006
* Nov 20 09:21:50 user.info kernel: BIOS-provided physical RAM map:
* Nov 20 09:21:50 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
* Nov 20 09:21:50 user.warn kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
* Nov 20 09:21:50 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
* Nov 20 09:21:50 user.warn kernel: BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
* Nov 20 09:21:50 user.warn kernel: BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data)
* Nov 20 09:21:50 user.warn kernel: BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS)
* Nov 20 09:21:50 user.notice kernel: 247MB LOWMEM available.
* Nov 20 09:21:50 user.warn kernel: On node 0 totalpages: 63472
* Nov 20 09:21:50 user.warn kernel: zone(0): 4096 pages.
* Nov 20 09:21:50 user.warn kernel: zone(1): 59376 pages.
* Nov 20 09:21:50 user.warn kernel: zone(2): 0 pages.
* Nov 20 09:21:50 user.notice kernel: ACPI disabled because your bios is from 00 and too old
* Nov 20 09:21:50 user.notice kernel: You can enable it with acpi=force
* Nov 20 09:21:50 user.info kernel: IBM machine detected. Enabling interrupts during APM calls.
* Nov 20 09:21:50 user.warn kernel: Kernel command line: root=/dev/ram0 rw
* Nov 20 09:21:50 user.info kernel: Initializing CPU#0
* Nov 20 09:21:50 user.warn kernel: Detected 500.139 MHz processor.
* Nov 20 09:21:50 user.warn kernel: Console: colour VGA+ 80x25
* Nov 20 09:21:50 user.warn kernel: Calibrating delay loop. 996.14 BogoMIPS
* Nov 20 09:21:50 user.info kernel: Memory: 245432k/253888k available (2198k kernel code, 8068k reserved, 734k data, 536k init, 0k highmem)
* Nov 20 09:21:50 user.info kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
* Nov 20 09:21:50 user.info kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
* Nov 20 09:21:50 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
* Nov 20 09:21:50 user.info kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
* Nov 20 09:21:50 user.warn kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
* Nov 20 09:21:50 user.info kernel: CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
* Nov 20 09:21:50 user.debug kernel: CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
* Nov 20 09:21:50 user.debug kernel: CPU: Common caps: 008021bf 808029bf 00000000 00000002
* Nov 20 09:21:50 user.warn kernel: CPU: AMD-K6(tm) 3D processor stepping 0c
* Nov 20 09:21:50 user.info kernel: Checking 'hlt' instruction. OK.
* Nov 20 09:21:50 user.info kernel: Checking for popad bug. OK.
* Nov 20 09:21:50 user.warn kernel: POSIX conformance testing by UNIFIX
* Nov 20 09:21:50 user.info kernel: ACPI: Subsystem revision 20040326
* Nov 20 09:21:50 user.info kernel: ACPI: Interpreter disabled.
* Nov 20 09:21:50 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
* Nov 20 09:21:50 user.info kernel: PCI: Using configuration type 1
* Nov 20 09:21:50 user.info kernel: PCI: Probing PCI hardware
* Nov 20 09:21:50 user.warn kernel: PCI: Probing PCI hardware (bus 00)
* Nov 20 09:21:50 user.info kernel: PCI: Using IRQ router SIS5595 [1039/0008] at 00:01.0
* Nov 20 09:21:50 user.info kernel: Linux NET4.0 for Linux 2.4
* Nov 20 09:21:50 user.info kernel: Based upon Swansea University Computer Society NET3.039
* Nov 20 09:21:50 user.warn kernel: Initializing RT netlink socket
* Nov 20 09:21:50 user.warn kernel: Starting kswapd
* Nov 20 09:21:50 user.info kernel: Journalled Block Device driver loaded
* Nov 20 09:21:50 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
* Nov 20 09:21:50 user.info kernel: devfs: boot_options: 0x1
* Nov 20 09:21:50 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
* Nov 20 09:21:50 user.warn kernel: pty: 256 Unix98 ptys configured
* Nov 20 09:21:50 user.info kernel: Real Time Clock Driver v1.10f
* Nov 20 09:21:50 user.info kernel: Floppy drive(s): fd0 is 1.44M
* Nov 20 09:21:50 user.info kernel: FDC 0 is a post-1991 82077
* Nov 20 09:21:50 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
* Nov 20 09:21:50 user.info kernel: loop: loaded (max 8 devices)
* Nov 20 09:21:50 user.info kernel: Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
* Nov 20 09:21:50 user.info kernel: Copyright (c) 1999-2004 Intel Corporation.
* Nov 20 09:21:50 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
* Nov 20 09:21:50 user.warn kernel: FW Version=$Version$
* Nov 20 09:21:50 user.info kernel: PCI: Found IRQ 10 for device 00:0b.0
* Nov 20 09:21:50 user.warn kernel: 3c59x: Donald Becker and others. http://www.scyld.com/network/vortex.html
* Nov 20 09:21:50 user.info kernel: 00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x7000. Vers LK1.1.18
* Nov 20 09:21:50 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
* Nov 20 09:21:50 user.info kernel: ThunderLAN driver v1.15
* Nov 20 09:21:50 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
* Nov 20 09:21:50 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
* Nov 20 09:21:50 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
* Nov 20 09:21:50 user.warn kernel: sk98lin: No adapter found.
* Nov 20 09:21:50 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
* Nov 20 09:21:50 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
* Nov 20 09:21:50 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Nov 20 09:21:50 user.info kernel: SIS5513: IDE controller at PCI slot 00:00.1
* Nov 20 09:21:50 user.info kernel: SIS5513: chipset revision 208
* Nov 20 09:21:50 user.info kernel: SIS5513: not 100% native mode: will probe irqs later
* Nov 20 09:21:50 user.info kernel: SIS5513: SiS530 ATA 66 controller
* Nov 20 09:21:50 user.info kernel: ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:pio, hdb:pio
* Nov 20 09:21:50 user.info kernel: ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:pio, hdd:pio
* Nov 20 09:21:50 user.warn kernel: hdb: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
* Nov 20 09:21:50 user.warn kernel: hdc: LTN403, ATAPI CD/DVD-ROM drive
* Nov 20 09:21:50 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
* Nov 20 09:21:50 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
* Nov 20 09:21:50 user.info kernel: SCSI subsystem driver Revision: 1.00
* Nov 20 09:21:50 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
* Nov 20 09:21:50 user.info kernel: Adaptec I2O RAID controllers.
* Nov 20 09:21:50 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 15 2006 01:22:52)
* Nov 20 09:21:50 user.warn kernel: scsi: Detection failed (no card)
* Nov 20 09:21:50 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
* Nov 20 09:21:50 user.info kernel: PCI: Found IRQ 11 for device 00:0a.0
* Nov 20 09:21:50 user.notice kernel: megaraid: found 0x1000:0x1960:bus 0:slot 10:func 0
* Nov 20 09:21:50 user.notice kernel: scsi1:Found MegaRAID controller at 0xd0000000, IRQ:11
* Nov 20 09:21:50 user.notice kernel: megaraid: [713R:G121] detected 1 logical drives.
* Nov 20 09:21:50 user.notice kernel: megaraid: supports extended CDBs.
* Nov 20 09:21:50 user.info kernel: megaraid: channel[0] is raid.
* Nov 20 09:21:50 user.info kernel: scsi1 : LSI Logic MegaRAID 713R 254 commands 16 targs 4 chans 7 luns
* Nov 20 09:21:50 user.notice kernel: scsi1: scanning scsi channel 0 for logical drives.
* Nov 20 09:21:50 user.warn kernel: Vendor: MegaRAID Model: LD 0 RAID0 286G Rev: 713R
* Nov 20 09:21:50 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
* Nov 20 09:21:50 user.notice kernel: scsi1: scanning scsi channel 1 for logical drives.
* Nov 20 09:21:50 user.notice kernel: scsi1: scanning scsi channel 2 for logical drives.
* Nov 20 09:21:50 user.notice kernel: scsi1: scanning scsi channel 3 for logical drives.
* Nov 20 09:21:50 user.notice kernel: scsi1: scanning scsi channel 4 [P0] for physical devices.
* Nov 20 09:21:50 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
* Nov 20 09:21:50 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
* Nov 20 09:21:50 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
* Nov 20 09:21:50 user.warn kernel: 3w-xxxx: No cards found.
* Nov 20 09:21:50 user.debug kernel: libata version 1.20 loaded.
* Nov 20 09:21:50 user.warn kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
* Nov 20 09:21:50 user.warn kernel: SCSI device sda: 586104832 512-byte hdwr sectors (300086 MB)
* Nov 20 09:21:50 user.info kernel: Partition check:
* Nov 20 09:21:50 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
* Nov 20 09:21:50 user.info kernel: raw1394: /dev/raw1394 device initialized
* Nov 20 09:21:50 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
* Nov 20 09:21:50 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
* Nov 20 09:21:50 user.info kernel: usb.c: registered new driver usbdevfs
* Nov 20 09:21:50 user.info kernel: usb.c: registered new driver hub
* Nov 20 09:21:50 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
* Nov 20 09:21:50 user.info kernel: PCI: Found IRQ 9 for device 00:01.2
* Nov 20 09:21:50 user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xd0004000, IRQ 9
* Nov 20 09:21:50 user.info kernel: host/usb-ohci.c: usb-00:01.2, PCI device 1039:7001
* Nov 20 09:21:50 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
* Nov 20 09:21:50 user.info kernel: hub.c: USB hub found
* Nov 20 09:21:50 user.info kernel: hub.c: 2 ports detected
* Nov 20 09:21:50 user.info kernel: Initializing USB Mass Storage driver.
* Nov 20 09:21:50 user.info kernel: usb.c: registered new driver usb-storage
* Nov 20 09:21:50 user.info kernel: USB Mass Storage support registered.
* Nov 20 09:21:50 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
* Nov 20 09:21:50 user.info kernel: IP Protocols: ICMP, UDP, TCP
* Nov 20 09:21:50 user.info kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
* Nov 20 09:21:50 user.info kernel: TCP: Hash tables configured (established 16384 bind 32768)
* Nov 20 09:21:50 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
* Nov 20 09:21:50 user.notice kernel: RAMDISK: NASLite file system found at block 0
* Nov 20 09:21:50 user.warn kernel: .<6>hub.c: new USB device 00:01.2-2, assigned address 2
* Nov 20 09:21:50 user.warn kernel: .<6>scsi2 : SCSI emulation for USB Mass Storage devices
* Nov 20 09:21:50 user.warn kernel: . Vendor: Generic Model: USB Flash Drive Rev: 1.00
* Nov 20 09:21:50 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
* Nov 20 09:21:50 user.warn kernel: .Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
* Nov 20 09:21:50 user.warn kernel: .SCSI device sdb: 524288 512-byte hdwr sectors (268 MB)
* Nov 20 09:21:50 user.warn kernel: .sdb: Write Protect is off
* Nov 20 09:21:50 user.info kernel: /dev/scsi/host2/bus0/target0/lun0:. unknown partition table
* Nov 20 09:21:50 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
* Nov 20 09:21:50 user.debug kernel: USB Mass Storage device found at 2
* Nov 20 09:21:50 user.warn kernel: .<6>Freeing initrd memory: 1601k freed
* Nov 20 09:21:50 user.warn kernel: VFS: Mounted root (ext2 filesystem).
* Nov 20 09:21:50 user.info kernel: Mounted devfs on /dev
* Nov 20 09:21:50 user.info kernel: Freeing unused kernel memory: 536k freed
* Nov 20 09:21:50 user.err kernel: ext3: No journal on filesystem on sd(8,1)


Got the following:

Quote:
Writing 500 x 699840 byte frames into file \\192.168.0.11\disk-0/framestream.dat

64 frames in 5,03 secs ==> 12,72 FPS (8,49 MB/s)
67 frames in 5,00 secs ==> 13,40 FPS (8,94 MB/s)
47 frames in 5,00 secs ==> 9,40 FPS (6,27 MB/s)
50 frames in 5,00 secs ==> 10,00 FPS (6,67 MB/s)
51 frames in 5,02 secs ==> 10,17 FPS (6,79 MB/s)
54 frames in 5,06 secs ==> 10,67 FPS (7,12 MB/s)
51 frames in 5,02 secs ==> 10,17 FPS (6,79 MB/s)
50 frames in 5,05 secs ==> 9,91 FPS (6,61 MB/s)
50 frames in 5,13 secs ==> 9,76 FPS (6,51 MB/s)
16 frames in 1,31 secs ==> 12,19 FPS (8,14 MB/s)

Write Summary : 500.00 frames in 46,61 secs
: 9,40(min) 10,73(avg) 13,40(max) FPS
: 6,27(min) 7,16(avg) 8,94(max) MB/s


It's obviously alot lower numbers than on the KT7A based box but at least its not choking down to 0.01MB/s! Back to the KT7A again I guess :S Anyone got any recommendations for a motherboard? I'd prefer something that would support my Duron 800 and also USB boot!
Top
 Profile  
 
superboss
 Post subject:
PostPosted: Mon Nov 20, 2006 6:13 am 
Offline

Joined: Sun Sep 24, 2006 1:32 pm
Posts: 290
OMG!

Quote:
Writing 1000 x 699840 byte frames into file \\192.168.0.11\disk-0/framestream.da
t
78 frames in 5,02 secs ==> 15,55 FPS (10,38 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
83 frames in 5,05 secs ==> 16,45 FPS (10,98 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
83 frames in 5,05 secs ==> 16,45 FPS (10,98 MB/s)
83 frames in 5,05 secs ==> 16,45 FPS (10,98 MB/s)
81 frames in 5,02 secs ==> 16,15 FPS (10,78 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
83 frames in 5,05 secs ==> 16,45 FPS (10,98 MB/s)
83 frames in 5,03 secs ==> 16,50 FPS (11,01 MB/s)
11 frames in 0,67 secs ==> 16,37 FPS (10,93 MB/s)

Write Summary : 1000.00 frames in 61,08 secs
: 15,55(min) 16,37(avg) 16,50(max) FPS
: 10,38(min) 10,93(avg) 11,01(max) MB/s


Dont ask me how because I'm not sure but this puppy is flying! :D I reset the megaraid card to factory defaults and plugged the card back into the KT7A, this time putting the NIC in PCI slot 3 instead of 2 (just for kicks as they supposedly share the same IRQ). The card got the same IRQ as earlier so I guess it was down to some setting on the megaraid card? Either way, I'm very happy with the writer numbers Im getting now :)

If (god forbid!) anyone else gets this problem I have now installed my video card (pci) in PCI1, the nic in PCI3 and the megaraid card in PCI5.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 24 posts ]  Go to page Previous  1, 2

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group