Server Storage Disk-3

This page provides specific information pertaining to Disk-3. Hardware, filesystem and S.M.A.R.T. details are listed below.

Disk-3 Hardware Details:

   MODEL: ST340823A, SN# 6EF00405, v.3.32
   INTERFACE: IDE, HOST-0, BUS-1, TARGET-1, LUN-0

Filesystem Details:

tune2fs 1.27 (8-Mar-2002) Filesystem volume name: NASLite-SE000161 Last mounted on: Filesystem UUID: 2685b524-94ef-4d09-ac85-ad836e37af8b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype needs_recovery sparse_super Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 4889248 Block count: 9767520 Reserved block count: 0 Free blocks: 9605878 Free inodes: 4889237 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16352 Inode blocks per group: 511 Last mount time: Fri Sep 29 23:21:33 2006 Last write time: Mon Oct 2 18:45:29 2006 Mount count: 3 Maximum mount count: 29 Last checked: Fri Sep 29 23:04:57 2006 Check interval: 15552000 (6 months) Next check after: Wed Mar 28 23:04:57 2007 Reserved blocks uid: 0 (user admin) Reserved blocks gid: 0 (group admin) First inode: 11 Inode size: 128 Journal UUID: Journal inode: 8 Journal device: 0x0000 First orphan inode: 0

S.M.A.R.T. Status:

smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate U Series 5 family Device Model: ST340823A Serial Number: 6EF00405 Firmware Version: 3.32 User Capacity: 40,020,664,320 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 4 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 2 21:18:03 2006 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 422) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 44) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000e 061 049 025 Old_age Always - 88299110 3 Spin_Up_Time 0x0002 070 070 000 Old_age Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 6 5 Reallocated_Sector_Ct 0x0032 100 100 036 Old_age Always - 0 7 Seek_Error_Rate 0x000e 086 060 030 Old_age Always - 453640099 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 26790 10 Spin_Retry_Count 0x0012 100 100 097 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 638 194 Temperature_Celsius 0x0022 044 050 000 Old_age Always - 44 195 Hardware_ECC_Recovered 0x001a 060 050 000 Old_age Always - 83022980 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 00 13 4f c2 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 e1 94 13 4f c2 a0 00 00:00:51.355 [Vendor specific SMART command] b0 e0 94 13 4f c2 a0 00 00:00:51.351 [Vendor specific SMART command] b0 d0 00 00 4f c2 a0 00 00:00:50.613 SMART READ DATA b0 d8 00 00 4f c2 a0 00 00:00:50.538 SMART ENABLE OPERATIONS ef 55 00 00 00 00 a0 00 00:00:50.534 SET FEATURES [Disable read look-ahead] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 26788 - # 2 Short captive Completed without error 00% 3 - # 3 Short captive Completed without error 00% 1 - Device does not support Selective Self Tests/Logging