Server Storage Disk-2

This page provides specific information pertaining to Disk-2. Hardware, filesystem and S.M.A.R.T. details are listed below.

Disk-2 Hardware Details:

   MODEL: Maxtor 4R120L0, SN# R41T474E, v.RAMB1TU0
   INTERFACE: IDE, HOST-0, BUS-1, TARGET-0, LUN-0

Filesystem Details:

tune2fs 1.27 (8-Mar-2002) Filesystem volume name: NASLite-SE000121 Last mounted on: Filesystem UUID: a0775ec8-dbc5-405f-98fe-18e49f7de93a Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype needs_recovery sparse_super Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 15007744 Block count: 30015215 Reserved block count: 0 Free blocks: 11092436 Free inodes: 14882146 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Fri Sep 29 23:21:33 2006 Last write time: Mon Oct 2 18:45:17 2006 Mount count: 21 Maximum mount count: 21 Last checked: Wed Jul 5 11:13:35 2006 Check interval: 15552000 (6 months) Next check after: Mon Jan 1 11:13:35 2007 Reserved blocks uid: 0 (user admin) Reserved blocks gid: 0 (group admin) First inode: 11 Inode size: 128 Journal UUID: Journal inode: 8 Journal device: 0x0000 First orphan inode: 0

S.M.A.R.T. Status:

smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax 16 family Device Model: Maxtor 4R120L0 Serial Number: R41T474E Firmware Version: RAMB1TU0 User Capacity: 122,942,324,736 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Mon Oct 2 21:18:03 2006 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 182) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 74) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 220 220 063 Pre-fail Always - 7092 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 52 5 Reallocated_Sector_Ct 0x0033 252 252 063 Pre-fail Always - 20 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 242 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 251 245 187 Pre-fail Always - 47520 9 Power_On_Minutes 0x0032 205 205 000 Old_age Always - 413h+32m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 62 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 39 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 5947 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 244 000 Old_age Always - 34 202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 140 140 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 50 40 97 03 10 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef fe 00 00 00 00 10 00 00:03:26.864 SET FEATURES [Reserved for CFA] c3 3d 00 00 00 00 10 00 00:03:26.816 [VENDOR SPECIFIC] c3 e4 00 00 00 00 10 00 00:03:26.784 [VENDOR SPECIFIC] c3 3d 00 00 00 00 10 00 00:03:26.784 [VENDOR SPECIFIC] 70 00 00 00 5e 20 10 00 00:03:26.736 SEEK [OBS-7] Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 50 40 97 03 10 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef fe 00 00 00 00 10 00 00:03:26.592 SET FEATURES [Reserved for CFA] c1 00 00 01 ff ff 10 00 00:03:26.352 [VENDOR SPECIFIC] c0 00 01 01 ff ff 10 00 00:03:26.352 CFA ERASE SECTORS [VS IF NO CFA] c1 00 00 01 ff ff 10 00 00:03:26.288 [VENDOR SPECIFIC] c0 00 01 01 ff ff 10 00 00:03:26.288 CFA ERASE SECTORS [VS IF NO CFA] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 15746 - # 2 Extended offline Completed without error 00% 15209 - # 3 Extended offline Completed without error 00% 15183 - # 4 Extended offline Completed without error 00% 13423 - # 5 Extended offline Interrupted (host reset) 40% 13422 - # 6 Extended offline Interrupted (host reset) 40% 13422 - # 7 Extended offline Aborted by host 40% 13422 - # 8 Extended offline Completed without error 00% 10652 - # 9 Extended offline Completed without error 00% 8572 - #10 Extended offline Completed without error 00% 7503 - #11 Extended offline Completed without error 00% 7359 - #12 Extended offline Completed without error 00% 7332 - #13 Extended offline Completed without error 00% 5125 - #14 Extended offline Aborted by host 20% 5124 - #15 Extended offline Interrupted (host reset) 40% 5123 - #16 Extended offline Aborted by host 40% 5123 - #17 Extended offline Aborted by host 40% 5123 - #18 Extended offline Aborted by host 70% 5122 - #19 Extended offline Aborted by host 40% 5122 - #20 Extended offline Aborted by host 70% 5122 - #21 Extended offline Completed without error 00% 1524 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.