NASLite Network Attached Storage

I have a LSI MegaRaid 511 i4 RAID controller, and I'm having some problems when trying to configure my storage devices with NASLite-2 CDD.

Here's the portion of syslog where it finds my card.

# Jan 13 12:46:28 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
# Jan 13 12:46:28 user.info kernel: PCI: Found IRQ 11 for device 00:0f.0
# Jan 13 12:46:28 user.notice kernel: megaraid: found 0x101e:0x1960:bus 0:slot 15:func 0
# Jan 13 12:46:28 user.notice kernel: scsi1:Found MegaRAID controller at 0xd8800000, IRQ:11
# Jan 13 12:46:28 user.notice kernel: megaraid: [6.62:1.03] detected 2 logical drives.
# Jan 13 12:46:28 user.notice kernel: megaraid: supports extended CDBs.
# Jan 13 12:46:28 user.info kernel: megaraid: channel[0] is raid.
# Jan 13 12:46:28 user.info kernel: megaraid: channel[1] is raid.
# Jan 13 12:46:28 user.info kernel: megaraid: channel[2] is raid.
# Jan 13 12:46:28 user.info kernel: megaraid: channel[3] is raid.
# Jan 13 12:46:28 user.info kernel: scsi1 : LSI Logic MegaRAID 6.62 254 commands 16 targs 7 chans 7 luns
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 0 for logical drives.
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 1 for logical drives.
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 2 for logical drives.
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 3 for logical drives.
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 4 [P0] for physical devices.
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 5 [P1] for physical devices.
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 6 [P2] for physical devices.
# Jan 13 12:46:28 user.notice kernel: scsi1: scanning scsi channel 7 [P3] for physical devices.
# Jan 13 12:46:28 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04

However, when I go to the Storage Configuration Menu, this is what I see:

ls: /etc/ServerElements/nldev/Disk-*: No such file or directory

There is nothing else listed there. Has anyone seen this problem before?

More info...

I was able to configure the physical drives with the RAID BIOS, and it appears NASLite is correctly seeing two logical volumes. Why can't I configure anything on the storage menu?

Any insight or assistance would be greatly appreciated. Can anyone help?

I think this might be a hardware problem so I continuing this thread over in the hardware forum.

http://www.serverelements.com/phpBB2/vi ... 93c67fccd2