NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Sun May 04, 2025 8:33 am

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
Berg
PostPosted: Fri Dec 08, 2006 5:52 pm 
Offline

Joined: Fri Feb 25, 2005 11:05 pm
Posts: 34
Location: Canada
Hello,

I have just finished building a new box to replace a simply shameful box (Pentium 366 mhz ...) and downloaded the current version of NAS 2 USB this morning. Everything is working OK (still have a few bugs to iron out) but I am unable to unlock my system.

When I click on the Unlock page icon, the browser tells me "File or directory not found", so I am completely unable to unlock my system. This is also the message when I try to access the About page.

Is this an issue with the download, my system or the user ;-)

Any help would be appreciated !
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Fri Dec 08, 2006 6:46 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
What is the URL that you go to when you click on the Unlock icon?
Top
 Profile  
 
Berg
 Post subject:
PostPosted: Fri Dec 08, 2006 6:57 pm 
Offline

Joined: Fri Feb 25, 2005 11:05 pm
Posts: 34
Location: Canada
Hello Tony,

I am clicking on the link in the left menu bar on the page which links to http://xxx.xxx.x.x/Status/htm/unlock.htm

Thanks for your help.
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Sat Dec 09, 2006 12:19 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
OK, So you can't even get to the unlock page. Can you post the syslog. I think you have misconfigured hardware that is hanging the status build past it's timeout.
Top
 Profile  
 
Berg
 Post subject:
PostPosted: Sat Dec 09, 2006 7:16 am 
Offline

Joined: Fri Feb 25, 2005 11:05 pm
Posts: 34
Location: Canada
Here we go ... but first a couple of comments - that would be consistent with a couple of other bugs.

Every now and then, the system does not boot completely. It seems to hang on the "splash page". A prompt reset clears that away. The otehr problem is that it fails to recognize/mount one of the drive that comes out of the previous NAS Lite 2 box.

Ok, here is the syslog -

Code:
System Message Log:

    * Dec 9 06:04:34 syslog.info syslogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
    * Dec 9 06:04:34 daemon.info init: ^MStarting pid 2233, console /dev/null: '/sbin/klogd'
    * Dec 9 06:04:34 user.notice kernel: klogd started: BusyBox v1.01 (2006.02.26-22:07+0000)
    * Dec 9 06:04:34 user.info kernel: DACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3040
    * Dec 9 06:04:34 user.info kernel: ACPI: FADT (v001 RD480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef30c0
    * Dec 9 06:04:34 user.info kernel: ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x1fef6e40
    * Dec 9 06:04:34 user.info kernel: ACPI: MCFG (v001 RD480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef6f40
    * Dec 9 06:04:34 user.info kernel: ACPI: MADT (v001 RD480 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef6d80
    * Dec 9 06:04:34 user.info kernel: ACPI: DSDT (v001 RD480 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
    * Dec 9 06:04:34 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
    * Dec 9 06:04:34 user.info kernel: Initializing CPU#0
    * Dec 9 06:04:34 user.warn kernel: Detected 1799.840 MHz processor.
    * Dec 9 06:04:34 user.warn kernel: Console: colour VGA+ 80x25
    * Dec 9 06:04:34 user.warn kernel: Calibrating delay loop. 3591.37 BogoMIPS
    * Dec 9 06:04:34 user.info kernel: Memory: 511840k/523200k available (2198k kernel code, 10972k reserved, 734k data, 536k init, 0k highmem)
    * Dec 9 06:04:34 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
    * Dec 9 06:04:34 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
    * Dec 9 06:04:34 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    * Dec 9 06:04:34 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
    * Dec 9 06:04:34 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
    * Dec 9 06:04:34 user.info kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    * Dec 9 06:04:34 user.info kernel: CPU: L2 Cache: 256K (64 bytes/line)
    * Dec 9 06:04:34 user.debug kernel: CPU: After generic, caps: 078bfbff e3d3fbff 00000000 00000000
    * Dec 9 06:04:34 user.debug kernel: CPU: Common caps: 078bfbff e3d3fbff 00000000 00000000
    * Dec 9 06:04:34 user.warn kernel: CPU: AMD Sempron(tm) Processor 3200+ stepping 02
    * Dec 9 06:04:34 user.info kernel: Enabling fast FPU save and restore. done.
    * Dec 9 06:04:34 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
    * Dec 9 06:04:34 user.info kernel: Checking 'hlt' instruction. OK.
    * Dec 9 06:04:34 user.info kernel: Checking for popad bug. OK.
    * Dec 9 06:04:34 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
    * Dec 9 06:04:34 user.warn kernel: POSIX conformance testing by UNIFIX
    * Dec 9 06:04:34 user.info kernel: ACPI: Subsystem revision 20040326
    * Dec 9 06:04:34 user.info kernel: PCI: PCI BIOS revision 3.00 entry at 0xfaa80, last bus=2
    * Dec 9 06:04:34 user.info kernel: PCI: Using configuration type 1
    * Dec 9 06:04:34 user.warn kernel: ACPI-0352: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node dfee8da0 start_node dfee8da0 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: ACPI-0352: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node dfee8e60 start_node dfee8e60 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: ACPI-0352: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node dfee8f20 start_node dfee8f20 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: ACPI-0352: *** Error: Looking up [LNKB] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node dfee8fe0 start_node dfee8fe0 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: ACPI-0352: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node c158f280 start_node c158f280 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: ACPI-0352: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node c158f340 start_node c158f340 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: ACPI-0352: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node c158f400 start_node c158f400 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.info kernel: ACPI: Interpreter enabled
    * Dec 9 06:04:34 user.info kernel: ACPI: Using PIC for interrupt routing
    * Dec 9 06:04:34 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4bios S4 S5)
    * Dec 9 06:04:34 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    * Dec 9 06:04:34 user.warn kernel: PCI: Probing PCI hardware (bus 00)
    * Dec 9 06:04:34 user.info kernel: PCI: Ignoring BAR0-3 of IDE controller 00:14.1
    * Dec 9 06:04:34 user.warn kernel: Transparent bridge - PCI device 1002:4371
    * Dec 9 06:04:34 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11)
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11)
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11)
    * Dec 9 06:04:34 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    * Dec 9 06:04:34 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
    * Dec 9 06:04:34 user.warn kernel: > ACPI-0352: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: search_node c158f280 start_node c158f280 return_node 00000000
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: [NULL NAME], AE_NOT_FOUND
    * Dec 9 06:04:34 user.warn kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCE6._PRT] (Node c158f2c0), AE_NOT_FOUND
    * Dec 9 06:04:34 user.info kernel: PCI: Probing PCI hardware
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    * Dec 9 06:04:34 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
    * Dec 9 06:04:34 user.info kernel: PCI: Using ACPI for IRQ routing
    * Dec 9 06:04:34 user.info kernel: Linux NET4.0 for Linux 2.4
    * Dec 9 06:04:34 user.info kernel: Based upon Swansea University Computer Society NET3.039
    * Dec 9 06:04:34 user.warn kernel: Initializing RT netlink socket
    * Dec 9 06:04:34 user.warn kernel: Starting kswapd
    * Dec 9 06:04:34 user.info kernel: Journalled Block Device driver loaded
    * Dec 9 06:04:34 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    * Dec 9 06:04:34 user.info kernel: devfs: boot_options: 0x1
    * Dec 9 06:04:34 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    * Dec 9 06:04:34 user.info kernel: ACPI: Power Button (FF) [PWRF]
    * Dec 9 06:04:34 user.info kernel: ACPI: Fan [FAN] (on)
    * Dec 9 06:04:34 user.info kernel: ACPI: Processor [CPU0] (supports C1)
    * Dec 9 06:04:34 user.info kernel: ACPI: Processor [CPU1] (supports C1)
    * Dec 9 06:04:34 user.info kernel: ACPI: Thermal Zone [THRM] (-127 C)
    * Dec 9 06:04:34 user.warn kernel: pty: 256 Unix98 ptys configured
    * Dec 9 06:04:34 user.info kernel: Real Time Clock Driver v1.10f
    * Dec 9 06:04:34 user.info kernel: Floppy drive(s): fd0 is 1.44M
    * Dec 9 06:04:34 user.info kernel: FDC 0 is a post-1991 82077
    * Dec 9 06:04:34 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    * Dec 9 06:04:34 user.info kernel: loop: loaded (max 8 devices)
    * Dec 9 06:04:34 user.info kernel: Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
    * Dec 9 06:04:34 user.info kernel: Copyright (c) 1999-2004 Intel Corporation.
    * Dec 9 06:04:34 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
    * Dec 9 06:04:34 user.warn kernel: FW Version=$Version$
    * Dec 9 06:04:34 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
    * Dec 9 06:04:34 user.info kernel: ThunderLAN driver v1.15
    * Dec 9 06:04:34 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
    * Dec 9 06:04:34 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    * Dec 9 06:04:34 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    * Dec 9 06:04:34 user.warn kernel: sk98lin: Network Device Driver v6.22
    * Dec 9 06:04:34 user.warn kernel: (C)Copyright 1999-2004 Marvell(R).
    * Dec 9 06:04:34 user.warn kernel: eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
    * Dec 9 06:04:34 user.warn kernel: PrefPort:A RlmtMode:Check Link State
    * Dec 9 06:04:34 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
    * Dec 9 06:04:34 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    * Dec 9 06:04:34 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    * Dec 9 06:04:34 user.info kernel: ATI-IXP400: IDE controller at PCI slot 00:14.1
    * Dec 9 06:04:34 user.info kernel: ATI-IXP400: chipset revision 128
    * Dec 9 06:04:34 user.info kernel: ATI-IXP400: not 100% native mode: will probe irqs later
    * Dec 9 06:04:34 user.info kernel: ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:pio, hdb:pio
    * Dec 9 06:04:34 user.info kernel: ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:pio
    * Dec 9 06:04:34 user.warn kernel: hdb: Maxtor 6Y200P0, ATA DISK drive
    * Dec 9 06:04:34 user.warn kernel: hdc: ST3300622A, ATA DISK drive
    * Dec 9 06:04:34 user.warn kernel: hdd: WDC WD1600JB-00EVA0, ATA DISK drive
    * Dec 9 06:04:34 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    * Dec 9 06:04:34 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
    * Dec 9 06:04:34 user.warn kernel: hdb: attached ide-disk driver.
    * Dec 9 06:04:34 user.warn kernel: hdb: host protected area => 1
    * Dec 9 06:04:34 user.info kernel: hdb: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(100)
    * Dec 9 06:04:34 user.warn kernel: hdc: attached ide-disk driver.
    * Dec 9 06:04:34 user.warn kernel: hdc: host protected area => 1
    * Dec 9 06:04:34 user.info kernel: hdc: 586072368 sectors (300069 MB) w/16384KiB Cache, CHS=36481/255/63, UDMA(100)
    * Dec 9 06:04:34 user.warn kernel: hdd: attached ide-disk driver.
    * Dec 9 06:04:34 user.warn kernel: hdd: host protected area => 1
    * Dec 9 06:04:34 user.info kernel: hdd: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
    * Dec 9 06:04:34 user.info kernel: Partition check:
    * Dec 9 06:04:34 user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
    * Dec 9 06:04:34 user.info kernel: /dev/ide/host0/bus1/target0/lun0: p1
    * Dec 9 06:04:34 user.info kernel: /dev/ide/host0/bus1/target1/lun0:hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, high=0, low=4, sector=0
    * Dec 9 06:04:34 user.warn kernel: end_request: I/O error, dev 16:40 (hdd), sector 0
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, high=0, low=4, sector=2
    * Dec 9 06:04:34 user.warn kernel: end_request: I/O error, dev 16:40 (hdd), sector 2
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, high=0, low=4, sector=4
    * Dec 9 06:04:34 user.warn kernel: end_request: I/O error, dev 16:40 (hdd), sector 4
    * Dec 9 06:04:34 user.warn kernel: or }
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, high=0, low=4, sector=0
    * Dec 9 06:04:34 user.warn kernel: end_request: I/O error, dev 16:40 (hdd), sector 0
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, high=0, low=4, sector=2
    * Dec 9 06:04:34 user.warn kernel: end_request: I/O error, dev 16:40 (hdd), sector 2
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, high=0, low=4, sector=4
    * Dec 9 06:04:34 user.warn kernel: end_request: I/O error, dev 16:40 (hdd), sector 4
    * Dec 9 06:04:34 user.warn kernel: unable to read partition table
    * Dec 9 06:04:34 user.info kernel: SCSI subsystem driver Revision: 1.00
    * Dec 9 06:04:34 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
    * Dec 9 06:04:34 user.info kernel: Detecting Adaptec I2O RAID controllers.
    * Dec 9 06:04:34 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 15 2006 01:22:52)
    * Dec 9 06:04:34 user.warn kernel: scsi: Detection failed (no card)
    * Dec 9 06:04:34 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
    * Dec 9 06:04:34 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
    * Dec 9 06:04:34 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
    * Dec 9 06:04:34 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
    * Dec 9 06:04:34 user.warn kernel: 3w-xxxx: No cards found.
    * Dec 9 06:04:34 user.debug kernel: libata version 1.20 loaded.
    * Dec 9 06:04:34 user.debug kernel: PCI(00:11.0): version 0.9
    * Dec 9 06:04:34 user.info kernel: ata1: SATA max UDMA/100 cmd 0xE0810080 ctl 0xE081008A bmdma 0xE0810000 irq 10
    * Dec 9 06:04:34 user.info kernel: ata2: SATA max UDMA/100 cmd 0xE08100C0 ctl 0xE08100CA bmdma 0xE0810008 irq 10
    * Dec 9 06:04:34 user.info kernel: ata1: no device found (phy stat 00000000)
    * Dec 9 06:04:34 user.info kernel: ata2: no device found (phy stat 00000000)
    * Dec 9 06:04:34 user.info kernel: ata3: SATA max UDMA/100 cmd 0xE0812080 ctl 0xE081208A bmdma 0xE0812000 irq 11
    * Dec 9 06:04:34 user.info kernel: ata4: SATA max UDMA/100 cmd 0xE08120C0 ctl 0xE08120CA bmdma 0xE0812008 irq 11
    * Dec 9 06:04:34 user.debug kernel: ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:407f
    * Dec 9 06:04:34 user.info kernel: ata3: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
    * Dec 9 06:04:34 user.info kernel: ata3: dev 0 configured for UDMA/100
    * Dec 9 06:04:34 user.info kernel: ata4: no device found (phy stat 00000000)
    * Dec 9 06:04:34 user.info kernel: ata5: SATA max UDMA/100 cmd 0xE0814080 ctl 0xE081408A bmdma 0xE0814000 irq 10
    * Dec 9 06:04:34 user.info kernel: ata6: SATA max UDMA/100 cmd 0xE08140C0 ctl 0xE08140CA bmdma 0xE0814008 irq 10
    * Dec 9 06:04:34 user.info kernel: ata7: SATA max UDMA/100 cmd 0xE0814280 ctl 0xE081428A bmdma 0xE0814200 irq 10
    * Dec 9 06:04:34 user.info kernel: ata8: SATA max UDMA/100 cmd 0xE08142C0 ctl 0xE08142CA bmdma 0xE0814208 irq 10
    * Dec 9 06:04:34 user.info kernel: ata5: no device found (phy stat 00000000)
    * Dec 9 06:04:34 user.info kernel: ata6: no device found (phy stat 00000000)
    * Dec 9 06:04:34 user.info kernel: ata7: no device found (phy stat 00000000)
    * Dec 9 06:04:34 user.info kernel: ata8: no device found (phy stat 00000000)
    * Dec 9 06:04:34 user.info kernel: scsi1 : sata_sil
    * Dec 9 06:04:34 user.info kernel: scsi2 : sata_sil
    * Dec 9 06:04:34 user.info kernel: scsi3 : sata_sil
    * Dec 9 06:04:34 user.info kernel: scsi4 : sata_sil
    * Dec 9 06:04:34 user.info kernel: scsi5 : sata_sil
    * Dec 9 06:04:34 user.info kernel: scsi6 : sata_sil
    * Dec 9 06:04:34 user.info kernel: scsi7 : sata_sil
    * Dec 9 06:04:34 user.info kernel: scsi8 : sata_sil
    * Dec 9 06:04:34 user.warn kernel: Vendor: ATA Model: ST3320620AS Rev: 3.AA
    * Dec 9 06:04:34 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 05
    * Dec 9 06:04:34 user.warn kernel: Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
    * Dec 9 06:04:34 user.warn kernel: SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    * Dec 9 06:04:34 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: p1
    * Dec 9 06:04:34 user.info kernel: ohci1394: $Rev: 1045 $ Ben Collins
    * Dec 9 06:04:34 user.info kernel: ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[fcffe000-fcffe7ff] Max Packet=[2048]
    * Dec 9 06:04:34 user.info kernel: raw1394: /dev/raw1394 device initialized
    * Dec 9 06:04:34 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
    * Dec 9 06:04:34 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
    * Dec 9 06:04:34 user.info kernel: usb.c: registered new driver usbdevfs
    * Dec 9 06:04:34 user.info kernel: usb.c: registered new driver hub
    * Dec 9 06:04:34 user.info kernel: ehci_hcd 00:13.2: PCI device 1002:4373
    * Dec 9 06:04:34 user.info kernel: ehci_hcd 00:13.2: irq 11, pci mem e0818000
    * Dec 9 06:04:34 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
    * Dec 9 06:04:34 user.debug kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000129200003aeab]
    * Dec 9 06:04:34 user.err kernel: ehci_hcd 00:13.2: BIOS handoff failed (160, 1010001)
    * Dec 9 06:04:34 user.warn kernel: spurious 8259A interrupt: IRQ7.
    * Dec 9 06:04:34 user.info kernel: ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    * Dec 9 06:04:34 user.info kernel: hub.c: USB hub found
    * Dec 9 06:04:34 user.info kernel: hub.c: 8 ports detected
    * Dec 9 06:04:34 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
    * Dec 9 06:04:34 user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xe081a000, IRQ 11
    * Dec 9 06:04:34 user.info kernel: host/usb-ohci.c: usb-00:13.0, PCI device 1002:4374
    * Dec 9 06:04:34 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
    * Dec 9 06:04:34 user.info kernel: hub.c: USB hub found
    * Dec 9 06:04:34 user.info kernel: hub.c: 4 ports detected
    * Dec 9 06:04:34 user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xe081c000, IRQ 11
    * Dec 9 06:04:34 user.info kernel: host/usb-ohci.c: usb-00:13.1, PCI device 1002:4375
    * Dec 9 06:04:34 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
    * Dec 9 06:04:34 user.info kernel: hub.c: USB hub found
    * Dec 9 06:04:34 user.info kernel: hub.c: 4 ports detected
    * Dec 9 06:04:34 user.info kernel: nitializing USB Mass Storage driver.
    * Dec 9 06:04:34 user.info kernel: usb.c: registered new driver usb-storage
    * Dec 9 06:04:34 user.info kernel: USB Mass Storage support registered.
    * Dec 9 06:04:34 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
    * Dec 9 06:04:34 user.info kernel: IP Protocols: ICMP, UDP, TCP
    * Dec 9 06:04:34 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
    * Dec 9 06:04:34 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
    * Dec 9 06:04:34 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    * Dec 9 06:04:34 user.notice kernel: RAMDISK: NASLite file system found at block 0
    * Dec 9 06:04:34 user.warn kernel: <6>Freeing initrd memory: 1601k freed
    * Dec 9 06:04:34 user.warn kernel: VFS: Mounted root (ext2 filesystem).
    * Dec 9 06:04:34 user.info kernel: Mounted devfs on /dev
    * Dec 9 06:04:34 user.info kernel: Freeing unused kernel memory: 536k freed
    * Dec 9 06:04:34 user.info kernel: hub.c: new USB device 00:13.1-4, assigned address 2
    * Dec 9 06:04:34 user.info kernel: scsi9 : SCSI emulation for USB Mass Storage devices
    * Dec 9 06:04:34 user.warn kernel: Vendor: LEXAR Model: DIGITAL FILM Rev: /W1.
    * Dec 9 06:04:34 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
    * Dec 9 06:04:34 user.warn kernel: Attached scsi removable disk sdb at scsi9, channel 0, id 0, lun 0
    * Dec 9 06:04:34 user.warn kernel: SCSI device sdb: 125952 512-byte hdwr sectors (64 MB)
    * Dec 9 06:04:34 user.warn kernel: sdb: Write Protect is off
    * Dec 9 06:04:34 user.info kernel: /dev/scsi/host9/bus0/target0/lun0: p1
    * Dec 9 06:04:34 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
    * Dec 9 06:04:34 user.debug kernel: USB Mass Storage device found at 2
    * Dec 9 06:04:34 user.warn kernel: hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdb: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.warn kernel: hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdb: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.warn kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.warn kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.warn kernel: hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdd: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.warn kernel: hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdd: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:04:34 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.warn kernel: eth0: network connection up using port A
    * Dec 9 06:04:34 user.warn kernel: speed: 100
    * Dec 9 06:04:34 user.warn kernel: autonegotiation: yes
    * Dec 9 06:04:34 user.warn kernel: duplex mode: full
    * Dec 9 06:04:34 user.warn kernel: flowctrl: symmetric
    * Dec 9 06:04:34 user.warn kernel: irq moderation: disabled
    * Dec 9 06:04:34 user.warn kernel: scatter-gather: enabled
    * Dec 9 06:04:34 user.warn kernel: hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdb: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.warn kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:04:34 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Dec 9 06:04:34 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
    * Dec 9 06:04:34 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Dec 9 06:04:34 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Dec 9 06:04:34 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
    * Dec 9 06:04:34 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Dec 9 06:04:34 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Dec 9 06:04:34 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
    * Dec 9 06:04:34 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Dec 9 06:04:34 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:04:34 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:04:34 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:04:34 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:04:34 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:05:03 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:05:03 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:05:03 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:06:03 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:06:03 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:06:03 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:07:03 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:07:03 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:07:03 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:08:03 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:08:03 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:08:03 user.warn kernel: ata3: error=0x04 { DriveStatusError }
    * Dec 9 06:09:03 user.err kernel: ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00
    * Dec 9 06:09:03 user.warn kernel: ata3: status=0x51 { DriveReady SeekComplete Error }
    * Dec 9 06:09:03 user.warn kernel: ata3: error=0x04 { DriveStatusError }


In case it helps, the board is a DFI LANPARTY UT RDX200 CF-DR and it has a twin that I was really hoping to put into service after this one is all sorted out. Here are the specs for the MB -

Quote:
CPU


# AMD® Athlon 64 X2 / Athlon 64 FX / Athlon 64 / Sempron
# Socket 939

Front Side Bus


# 2000MT/s HyperTransport interface

Chipset


# ATI chipset - Northbridge: ATI Radeon Xpress 200 CrossFire - Southbridge: ATI SB450

Memory


# Four 184-pin DDR SDRAM DIMM sockets
# Supports dual channel (128-bit wide) memory interface
# Supports up to 4GB system memory
# Supports PC2100 (DDR266), PC2700 (DDR333) and PC3200 (DDR400) DDR SDRAM DIMM

Expansion Slots


# 2 PCI Express x16 slots CrossFire mode - Each x16 slot operates at x8 bandwidth. Single VGA mode - PCIE1 slot operates at x16 bandwidth. PCIE3 slot operates at x1 bandwidth.
# 1 PCI Express x1 slot
# 3 PCI slots

BIOS


# Award BIOS
# CMOS Reloaded
# CPU/DRAM overclocking
# CPU/DRAM/Chipset overvoltage
# 4Mbit flash memory

Power Management


# Supports ACPI STR (Suspend to RAM) function
# Wake-On-Events include: - Wake-On-PS/2 Keyboard/Mouse - Wake-On-USB Keyboard/Mouse - Wake-On-Ring - Wake-On-LAN - RTC timer to power-on the system
# AC power failure recovery

Hardware Monitor


# Monitors CPU/system/chipset temperature
# Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/Vchipset/Vdram voltages
# Monitors the speed of the CPU fan, Fan 2 and Fan 3 fan
# CPU Overheat Protection function monitors CPU temperature during system boot-up

Audio


# Karajan audio module - Realtek ALC882 8-channel High Definition Audio CODEC - 6 audio jacks - 1 CD-in connector - 1 front audio connector
# True stereo line level outputs
# S/PDIF-in/out interface

LAN


# Dual Gigabit LAN - Marvell 88E8053 PCI Express and Marvell 88E8001 PCI LAN
# Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards

IDE


# Supports two IDE connectors that allow connecting up to four UltraDMA 133Mbps hard drives

Serial ATA with RAID


# Four Serial ATA ports supported by the ATI SB450 chip - SATA speed up to 1.5Gb/s - RAID 0 and RAID 1
# Four Serial ATA ports supported by the Silicon Image Sil 3114 chip - SATA speed up to 1.5Gb/s - RAID 0, RAID 1, RAID 0+1 and RAID 5

IEEE 1394


# VIA VT6307
# Supports two 100/200/400 Mb/sec ports


Thanks for your help. Let me know if you need anything else. :)
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Sun Dec 10, 2006 12:24 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
NASLite seems to think that the board is severely misconfigured. There are a lot of errors with ACPI and the storage drives. The mess is probably on the BIOS level, so here is what you can try:

1. Disable all unnecessary options in the BIOS including ACPI
2. Turn SMART on in the BIOS
3. Remove all unnecessary peripherals
4. In the BIOS disable the PNP OS option

Try that first and see if the system will boot clean with no errors. If all looks good then you can start adding features as necessary.

Hope that helps...
Top
 Profile  
 
Berg
 Post subject:
PostPosted: Sun Dec 10, 2006 10:09 am 
Offline

Joined: Fri Feb 25, 2005 11:05 pm
Posts: 34
Location: Canada
Thanks - I'll try that and get back to you here.

Wish me luck :)
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Sun Dec 10, 2006 2:04 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Berg wrote:
Wish me luck :)


Confidence is all you need ;-)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group