NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Wed May 28, 2025 7:08 pm

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
Grasshopper
PostPosted: Sun Jun 21, 2009 6:23 am 
Offline

Joined: Thu Apr 06, 2006 5:56 pm
Posts: 82
I recently rebuilt my NAS server and am now seeing some strange behavior. When I copy a file to the NAS (from Windows) it is really slow. (A 2GB file takes hours.) However, if I start copying a second file to the NAS while the first copy is still in progress, both speed up to normal speeds.

When I say "rebuilt the NAS", I really just moved around some drives in an existing NASLite server. All of the other hardware is the same and (in my mind anyway) proven: a 3Ware RAID card and an Intel NIC are the main ingredients.

Has anybody ever seen this before?

Thanks,

Tom
Top
 Profile  
 
Ralph
PostPosted: Sun Jun 21, 2009 3:37 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:01 pm
Posts: 801
Location: ServerElements
Post the syslog.
Top
 Profile  
 
Grasshopper
PostPosted: Mon Jun 22, 2009 8:24 am 
Offline

Joined: Thu Apr 06, 2006 5:56 pm
Posts: 82
OK, I'll do that later tonight.
Top
 Profile  
 
dimension
PostPosted: Mon Jun 22, 2009 11:40 am 
Offline

Joined: Tue Aug 10, 2004 1:50 pm
Posts: 604
Location: Texas, USA
Grasshopper wrote:
I recently rebuilt my NAS server and am now seeing some strange behavior. When I copy a file to the NAS (from Windows) it is really slow. (A 2GB file takes hours.) However, if I start copying a second file to the NAS while the first copy is still in progress, both speed up to normal speeds.

When I say "rebuilt the NAS", I really just moved around some drives in an existing NASLite server. All of the other hardware is the same and (in my mind anyway) proven: a 3Ware RAID card and an Intel NIC are the main ingredients.

Has anybody ever seen this before?

Thanks,

Tom


I've never heard of thins. Does it do the same from any client and other protocols like ftp? The only thing I could think of is bad ram or your typical irq issues.
Top
 Profile  
 
Grasshopper
PostPosted: Mon Jun 22, 2009 6:50 pm 
Offline

Joined: Thu Apr 06, 2006 5:56 pm
Posts: 82
It's very odd for sure. At first I thought it was a Windows problem but the same thing happens if I initiate the second copy from the same Windows computer or a different one. It's 100% reproducable.

I have not tried FTP and I have NFS and AFP disabled.

The syslog:

Code:
    * Jun 15 20:46:20 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
    * Jun 15 20:46:20 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
    * Jun 15 20:46:20 user.info kernel: BIOS-provided physical RAM map:
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    * Jun 15 20:46:20 user.warn kernel: BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
    * Jun 15 20:46:20 user.notice kernel: 127MB HIGHMEM available.
    * Jun 15 20:46:20 user.notice kernel: 896MB LOWMEM available.
    * Jun 15 20:46:20 user.warn kernel: On node 0 totalpages: 262064
    * Jun 15 20:46:20 user.warn kernel: zone(0): 4096 pages.
    * Jun 15 20:46:20 user.warn kernel: zone(1): 225280 pages.
    * Jun 15 20:46:20 user.warn kernel: zone(2): 32688 pages.
    * Jun 15 20:46:20 user.info kernel: ACPI: RSDP (v000 ACPIAM ) @ 0x000f8060
    * Jun 15 20:46:20 user.info kernel: ACPI: RSDT (v001 A M I OEMRSDT 0x07000720 MSFT 0x00000097) @ 0x3ffb0000
    * Jun 15 20:46:20 user.info kernel: ACPI: FADT (v002 A M I OEMFACP 0x07000720 MSFT 0x00000097) @ 0x3ffb0200
    * Jun 15 20:46:20 user.info kernel: ACPI: MADT (v001 A M I OEMAPIC 0x07000720 MSFT 0x00000097) @ 0x3ffb0390
    * Jun 15 20:46:20 user.info kernel: ACPI: MCFG (v001 A M I OEMMCFG 0x07000720 MSFT 0x00000097) @ 0x3ffb0410
    * Jun 15 20:46:20 user.info kernel: ACPI: OEMB (v001 A M I AMI_OEM 0x07000720 MSFT 0x00000097) @ 0x3ffc0040
    * Jun 15 20:46:20 user.info kernel: ACPI: DSDT (v001 4CDS2 4CDS2141 0x00000141 INTL 0x02002026) @ 0x00000000
    * Jun 15 20:46:20 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
    * Jun 15 20:46:20 user.info kernel: Initializing CPU#0
    * Jun 15 20:46:20 user.warn kernel: Detected 1795.539 MHz processor.
    * Jun 15 20:46:20 user.warn kernel: Console: colour VGA+ 80x25
    * Jun 15 20:46:20 user.warn kernel: Calibrating delay loop. 3578.26 BogoMIPS
    * Jun 15 20:46:20 user.info kernel: Memory: 1029916k/1048256k available (2214k kernel code, 17952k reserved, 642k data, 540k init, 130752k highmem)
    * Jun 15 20:46:20 user.info kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    * Jun 15 20:46:20 user.info kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
    * Jun 15 20:46:20 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    * Jun 15 20:46:20 user.info kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
    * Jun 15 20:46:20 user.warn kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
    * Jun 15 20:46:20 user.info kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    * Jun 15 20:46:20 user.debug kernel: CPU: After generic, caps: afebfbff 20000000 00000000 00000000
    * Jun 15 20:46:20 user.debug kernel: CPU: Common caps: afebfbff 20000000 00000000 00000000
    * Jun 15 20:46:20 user.warn kernel: CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz stepping 01
    * Jun 15 20:46:20 user.info kernel: Enabling fast FPU save and restore. done.
    * Jun 15 20:46:20 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
    * Jun 15 20:46:20 user.info kernel: Checking 'hlt' instruction. OK.
    * Jun 15 20:46:20 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
    * Jun 15 20:46:20 user.warn kernel: POSIX conformance testing by UNIFIX
    * Jun 15 20:46:20 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    * Jun 15 20:46:20 user.warn kernel: mtrr: detected mtrr type: Intel
    * Jun 15 20:46:20 user.info kernel: ACPI: Subsystem revision 20040326
    * Jun 15 20:46:20 user.info kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
    * Jun 15 20:46:20 user.info kernel: PCI: Using configuration type 1
    * Jun 15 20:46:20 user.info kernel: ACPI: Interpreter enabled
    * Jun 15 20:46:20 user.info kernel: ACPI: Using PIC for interrupt routing
    * Jun 15 20:46:20 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
    * Jun 15 20:46:20 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    * Jun 15 20:46:20 user.warn kernel: PCI: Probing PCI hardware (bus 00)
    * Jun 15 20:46:20 user.info kernel: PCI: Via IRQ fixup
    * Jun 15 20:46:20 user.warn kernel: Transparent bridge - PCI device 1106:337a
    * Jun 15 20:46:20 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    * Jun 15 20:46:20 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    * Jun 15 20:46:20 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
    * Jun 15 20:46:20 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    * Jun 15 20:46:20 user.info kernel: PCI: Probing PCI hardware
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    * Jun 15 20:46:20 user.warn kernel: PI: PCI Interrupt Link [LNKC] enabled at IRQ 3
    * Jun 15 20:46:20 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
    * Jun 15 20:46:20 user.info kernel: PCI: Using ACPI for IRQ routing
    * Jun 15 20:46:20 user.err kernel: PCI: Cannot allocate resource region 0 of device 00:00.0
    * Jun 15 20:46:20 user.info kernel: Linux NET4.0 for Linux 2.4
    * Jun 15 20:46:20 user.info kernel: Based upon Swansea University Computer Society NET3.039
    * Jun 15 20:46:20 user.warn kernel: Initializing RT netlink socket
    * Jun 15 20:46:20 user.warn kernel: Starting kswapd
    * Jun 15 20:46:20 user.warn kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
    * Jun 15 20:46:20 user.info kernel: Journalled Block Device driver loaded
    * Jun 15 20:46:20 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    * Jun 15 20:46:20 user.info kernel: devfs: boot_options: 0x1
    * Jun 15 20:46:20 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    * Jun 15 20:46:20 user.info kernel: ACPI: Power Button (FF) [PWRF]
    * Jun 15 20:46:20 user.info kernel: ACPI: Sleep Button (CM) [SLPB]
    * Jun 15 20:46:20 user.info kernel: ACPI: Processor [CPU1] (supports C1, 16 throttling states)
    * Jun 15 20:46:20 user.info kernel: ACPI: Processor [CPU2] (supports C1, 16 throttling states)
    * Jun 15 20:46:20 user.info kernel: ACPI: Processor [CPU3] (supports C1, 16 throttling states)
    * Jun 15 20:46:20 user.info kernel: ACPI: Processor [CPU4] (supports C1, 16 throttling states)
    * Jun 15 20:46:20 user.warn kernel: pty: 256 Unix98 ptys configured
    * Jun 15 20:46:20 user.info kernel: Real Time Clock Driver v1.10f
    * Jun 15 20:46:20 user.warn kernel: floppy0: no floppy controllers found
    * Jun 15 20:46:20 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    * Jun 15 20:46:20 user.info kernel: loop: loaded (max 8 devices)
    * Jun 15 20:46:20 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
    * Jun 15 20:46:20 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
    * Jun 15 20:46:20 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
    * Jun 15 20:46:20 user.warn kernel: FW Version=$Version$
    * Jun 15 20:46:20 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
    * Jun 15 20:46:20 user.info kernel: ThunderLAN driver v1.15
    * Jun 15 20:46:20 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
    * Jun 15 20:46:20 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    * Jun 15 20:46:20 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    * Jun 15 20:46:20 user.warn kernel: sk98lin: No adapter found.
    * Jun 15 20:46:20 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
    * Jun 15 20:46:20 user.info kernel: r8169 Gigabit Ethernet driver 1.2 loaded
    * Jun 15 20:46:20 user.debug kernel: eth0: Identified chip type is 'RTL8169s/8110s'.
    * Jun 15 20:46:20 user.info kernel: eth0: RTL8169 at 0xf880b800, 00:18:4d:e9:3b:27, IRQ 7
    * Jun 15 20:46:20 user.info kernel: eth0: Auto-negotiation Enabled.
    * Jun 15 20:46:20 user.info kernel: eth0: 1000Mbps Full-duplex operation.
    * Jun 15 20:46:20 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    * Jun 15 20:46:20 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    * Jun 15 20:46:20 user.info kernel: VP_IDE: IDE controller at PCI slot 00:0f.1
    * Jun 15 20:46:20 user.info kernel: VP_IDE: chipset revision 7
    * Jun 15 20:46:20 user.info kernel: VP_IDE: not 100% native mode: will probe irqs later
    * Jun 15 20:46:20 user.warn kernel: VP_IDE: Unknown VIA SouthBridge, disabling DMA.
    * Jun 15 20:46:20 user.warn kernel: hda: WDC WD5000AAJB-00YRA0, ATA DISK drive
    * Jun 15 20:46:20 user.warn kernel: hdb: CD-ROM CDU55E, ATAPI CD/DVD-ROM drive
    * Jun 15 20:46:20 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    * Jun 15 20:46:20 user.warn kernel: ide0: probed IRQ 14 failed, using default.
    * Jun 15 20:46:20 user.warn kernel: hda: attached ide-disk driver.
    * Jun 15 20:46:20 user.warn kernel: hda: host protected area => 1
    * Jun 15 20:46:20 user.info kernel: hda: 976773168 sectors (500108 MB) w/8192KiB Cache, CHS=60801/255/63
    * Jun 15 20:46:20 user.info kernel: Partition check:
    * Jun 15 20:46:20 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2
    * Jun 15 20:46:20 user.info kernel: SCSI subsystem driver Revision: 1.00
    * Jun 15 20:46:20 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
    * Jun 15 20:46:20 user.info kernel: Detecting Adaptec I2O RAID controllers.
    * Jun 15 20:46:20 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
    * Jun 15 20:46:20 user.warn kernel: scsi: Detection failed (no card)
    * Jun 15 20:46:20 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
    * Jun 15 20:46:20 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
    * Jun 15 20:46:20 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
    * Jun 15 20:46:20 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
    * Jun 15 20:46:20 user.notice kernel: scsi1 : Found a 3ware Storage Controller at 0xec00, IRQ: 5, P-chip: 1.3
    * Jun 15 20:46:20 user.info kernel: scsi1 : 3ware Storage Controller
    * Jun 15 20:46:20 user.warn kernel: Vendor: 3ware Model: Logical Disk 0 Rev: 1.0
    * Jun 15 20:46:20 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 00
    * Jun 15 20:46:20 user.warn kernel: Vendor: 3ware Model: Logical Disk 1 Rev: 1.0
    * Jun 15 20:46:20 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 00
    * Jun 15 20:46:20 user.warn kernel: Vendor: 3ware Model: Logical Disk 2 Rev: 1.0
    * Jun 15 20:46:20 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 00
    * Jun 15 20:46:20 user.warn kernel: Vendor: 3ware Model: Logical Disk 3 Rev: 1.0
    * Jun 15 20:46:20 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 00
    * Jun 15 20:46:20 user.warn kernel: Vendor: 3ware Model: Logical Disk 4 Rev: 1.0
    * Jun 15 20:46:20 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 00
    * Jun 15 20:46:20 user.warn kernel: Vendor: 3ware Model: Logical Disk 5 Rev: 1.0
    * Jun 15 20:46:20 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 00
    * Jun 15 20:46:20 user.debug kernel: libata version 1.20 loaded.
    * Jun 15 20:46:20 user.warn kernel:
    * Jun 15 20:46:20 user.warn kernel: Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
    * Jun 15 20:46:20 user.warn kernel: Attached scsi disk sdc at scsi1, channel 0, id 2, lun 0
    * Jun 15 20:46:20 user.warn kernel: Attached scsi disk sdd at scsi1, channel 0, id 3, lun 0
    * Jun 15 20:46:20 user.warn kernel: Attached scsi disk sde at scsi1, channel 0, id 4, lun 0
    * Jun 15 20:46:20 user.warn kernel: Attached scsi disk sdf at scsi1, channel 0, id 5, lun 0
    * Jun 15 20:46:20 user.warn kernel: SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    * Jun 15 20:46:20 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
    * Jun 15 20:46:20 user.warn kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
    * Jun 15 20:46:20 user.info kernel: /dev/scsi/host1/bus0/target1/lun0: p1
    * Jun 15 20:46:20 user.warn kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
    * Jun 15 20:46:20 user.info kernel: /dev/scsi/host1/bus0/target2/lun0: p1
    * Jun 15 20:46:20 user.warn kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
    * Jun 15 20:46:20 user.info kernel: /dev/scsi/host1/bus0/target3/lun0: p1
    * Jun 15 20:46:20 user.warn kernel: SCSI device sde: 976773168 512-byte hdwr sectors (500108 MB)
    * Jun 15 20:46:20 user.info kernel: /dev/scsi/host1/bus0/target4/lun0: p1
    * Jun 15 20:46:20 user.warn kernel: SCSI device sdf: 586114704 512-byte hdwr sectors (300091 MB)
    * Jun 15 20:46:20 user.info kernel: /dev/scsi/host1/bus0/target5/lun0: p1
    * Jun 15 20:46:20 user.info kernel: raw1394: /dev/raw1394 device initialized
    * Jun 15 20:46:20 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
    * Jun 15 20:46:20 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
    * Jun 15 20:46:20 user.info kernel: usb.c: registered new driver usbdevfs
    * Jun 15 20:46:20 user.info kernel: usb.c: registered new driver hub
    * Jun 15 20:46:20 user.info kernel: ehci_hcd 00:10.4: PCI device 1106:3104
    * Jun 15 20:46:20 user.info kernel: ehci_hcd 00:10.4: irq 3, pci mem f880fc00
    * Jun 15 20:46:20 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
    * Jun 15 20:46:20 user.info kernel: ehci_hcd 00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    * Jun 15 20:46:20 user.info kernel: hub.c: USB hub found
    * Jun 15 20:46:20 user.info kernel: hub.c: 8 ports detected
    * Jun 15 20:46:20 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
    * Jun 15 20:46:20 user.info kernel: host/uhci.c: USB UHCI at I/O 0xcc00, IRQ 7
    * Jun 15 20:46:20 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
    * Jun 15 20:46:20 user.info kernel: hub.c: USB hub found
    * Jun 15 20:46:20 user.info kernel: hub.c: 2 ports detected
    * Jun 15 20:46:20 user.info kernel: host/uhci.c: USB UHCI at I/O 0xc880, IRQ 3
    * Jun 15 20:46:20 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
    * Jun 15 20:46:20 user.info kernel: hub.c: USB hub found
    * Jun 15 20:46:20 user.info kernel: hub.c: 2 ports detected
    * Jun 15 20:46:20 user.info kernel: host/uhci.c: USB UHCI at I/O 0xc800, IRQ 5
    * Jun 15 20:46:20 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
    * Jun 15 20:46:20 user.info kernel: hub.c: USB hub found
    * Jun 15 20:46:20 user.info kernel: hub.c: 2 ports detected
    * Jun 15 20:46:20 user.info kernel: host/uhci.c: USB UHCI at I/O 0xc480, IRQ 11
    * Jun 15 20:46:20 user.info kernel: usb.c: new USB bus registered, assigned bus number 5
    * Jun 15 20:46:20 user.info kernel: hub.c: USB hub found
    * Jun 15 20:46:20 user.info kernel: hub.c: 2 ports detected
    * Jun 15 20:46:20 user.info kernel: usb.c: registered new driver usbkbd
    * Jun 15 20:46:20 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
    * Jun 15 20:46:20 user.info kernel: Initializing USB Mass Storage driver.
    * Jun 15 20:46:20 user.info kernel: usb.c: registered new driver usb-storage
    * Jun 15 20:46:20 user.info kernel: USB Mass Storage support registered.
    * Jun 15 20:46:20 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
    * Jun 15 20:46:20 user.info kernel: IP Protocols: ICMP, UDP, TCP
    * Jun 15 20:46:20 user.info kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
    * Jun 15 20:46:20 user.info kernel: TCP: Hash tables configured (established 262144 bind 65536)
    * Jun 15 20:46:20 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    * Jun 15 20:46:20 user.notice kernel: RAMDISK: NASLite file system found at block 0
    * Jun 15 20:46:20 user.warn kernel: <6>Freeing initrd memory: 1962k freed
    * Jun 15 20:46:20 user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
    * Jun 15 20:46:20 user.warn kernel: VFS: Mounted root (ext2 filesystem).
    * Jun 15 20:46:20 user.info kernel: Mounted devfs on /dev
    * Jun 15 20:46:20 user.info kernel: Freeing unused kernel memory: 540k freed
    * Jun 15 20:46:20 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 15 20:46:20 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
    * Jun 15 20:46:20 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 15 20:46:20 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 15 20:46:20 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
    * Jun 15 20:46:20 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 15 20:46:20 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 15 20:46:20 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,17), internal journal
    * Jun 15 20:46:20 user.info kernel: ith ordered data mode.
    * Jun 15 20:46:20 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 15 20:46:20 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,33), internal journal
    * Jun 15 20:46:20 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 15 20:46:20 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 15 20:46:20 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,49), internal journal
    * Jun 15 20:46:20 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 15 20:46:20 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 15 20:46:20 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,65), internal journal
    * Jun 15 20:46:20 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 15 20:46:20 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 15 20:46:20 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,81), internal journal
    * Jun 15 20:46:20 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.

 
NASLite-2 HDD v2.06 10-2007
Content updated every 1 min.
Last update Mon Jun 22 22:34:01 UTC 2009.    Linux Powered
© 2006 Server Elements - All Rights Reserved
Top
 Profile  
 
Ralph
PostPosted: Mon Jun 22, 2009 7:40 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:01 pm
Posts: 801
Location: ServerElements
IRQ 7 conflict with your NIC card and USB.
Top
 Profile  
 
Grasshopper
PostPosted: Tue Jun 23, 2009 9:05 am 
Offline

Joined: Thu Apr 06, 2006 5:56 pm
Posts: 82
I saw that and disabled the USB in the BIOS. (I turned it on while experimenting with FreeNAS.) No change.

I also see where it is recognizing my NIC as a Realtec which makes no sense since it's an Intel card. I'll have to crack the case open tonight to see if I screwed up and put in the wrong NIC while rebuilding the server. I don't see how that could have happened but I suppose anything is possible.
Top
 Profile  
 
Grasshopper
PostPosted: Wed Jun 24, 2009 7:50 pm 
Offline

Joined: Thu Apr 06, 2006 5:56 pm
Posts: 82
Problem solved. I did install the wrong NIC :oops: Somehow while I was pulling apart and rebuilding the machine I put in a Netgear (RTL based) NIC instead of the Intel. I put the correct NIC back into the machine and now it is working as expected.
Top
 Profile  
 
mikeiver1
PostPosted: Wed Jun 24, 2009 8:52 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
LOL, will the wonders of user error ever cease to amaze!

Glad the problems are all solved and you have a NAS box that works right.

Mike
Top
 Profile  
 
Grasshopper
PostPosted: Thu Jun 25, 2009 6:02 pm 
Offline

Joined: Thu Apr 06, 2006 5:56 pm
Posts: 82
And to add insult to injury my wife told me that if I would just get rid of some of those old parts I would not have these type of problems. :D
Top
 Profile  
 
NickC
PostPosted: Fri Jun 26, 2009 1:26 am 
Offline

Joined: Fri Jan 12, 2007 4:27 am
Posts: 577
Location: Scotland
Ooooooooooohhh - she's cruel, right, but cruel all the same! ;)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group