NASLite Network Attached Storage

I have version v2.06 10-2007 of Naslite and recently changed boxes. Sometimes when it reboots I get the INVALID for the licence status. I "think" it may be a piece of hardware that does not always get picked up. Can you give me any idea's on how to troubleshoot this?

I think it is swapping between to licence codes.

Thanks

2.06 what? cdd, usb or hdd? I'll bet it's usb and you are booting off of it. If that's it, then turn off usb2 support in the bios and if that doesn't work get a cheap usb stick and not a fancy one with security and all. sometime the more expensive usb flash has a hub inside that can be flaky.

Nope.... using a HDD to flash card convertor.

If I get the boot logs from when I loose the licence and also the log from when it is working .. can someone on the forum identify the hardware that is causing the issue

thanks

In the bios disable DMA for the ide channel where you have the flash. Pick pio or something low level like that. Yeah, post the logs so people can take a look.

Okay.. I have tried all kinds of settings in the BIOS and still the same thing.. the system switches between 2 licence codes...could not posts 3 logs at once.. see if you can identify the issue from what I have posted from this.

Thanks

One thing to note is that the on board network card has been disabled and a PCI gigi network card has been installed.



• Apr 2 02:29:05 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
• Apr 2 02:29:05 user.info kernel: rupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 *12 14 15)
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
• Apr 2 02:29:05 user.info kernel: PCI: Probing PCI hardware
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 11
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 4
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 12
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
• Apr 2 02:29:05 user.warn kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
• Apr 2 02:29:05 user.info kernel: PCI: Using ACPI for IRQ routing
• Apr 2 02:29:05 user.info kernel: Linux NET4.0 for Linux 2.4
• Apr 2 02:29:05 user.info kernel: Based upon Swansea University Computer Society NET3.039
• Apr 2 02:29:05 user.warn kernel: Initializing RT netlink socket
• Apr 2 02:29:05 user.warn kernel: Starting kswapd
• Apr 2 02:29:05 user.warn kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
• Apr 2 02:29:05 user.info kernel: Journalled Block Device driver loaded
• Apr 2 02:29:05 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
• Apr 2 02:29:05 user.info kernel: devfs: boot_options: 0x1
• Apr 2 02:29:05 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
• Apr 2 02:29:05 user.info kernel: ACPI: Power Button (FF) [PWRF]
• Apr 2 02:29:05 user.info kernel: ACPI: Fan [FAN] (on)
• Apr 2 02:29:05 user.info kernel: ACPI: Processor [CPU0] (supports C1)
• Apr 2 02:29:05 user.info kernel: ACPI: Thermal Zone [THRM] (0 C)
• Apr 2 02:29:05 user.warn kernel: pty: 256 Unix98 ptys configured
• Apr 2 02:29:05 user.info kernel: Real Time Clock Driver v1.10f
• Apr 2 02:29:05 user.info kernel: Floppy drive(s): fd0 is 1.44M
• Apr 2 02:29:05 user.warn kernel: floppy0: no floppy controllers found
• Apr 2 02:29:05 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
• Apr 2 02:29:05 user.info kernel: loop: loaded (max 8 devices)
• Apr 2 02:29:05 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
• Apr 2 02:29:05 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
• Apr 2 02:29:05 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
• Apr 2 02:29:05 user.warn kernel: FW Version=$Version$
• Apr 2 02:29:05 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
• Apr 2 02:29:05 user.info kernel: ThunderLAN driver v1.15
• Apr 2 02:29:05 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
• Apr 2 02:29:05 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
• Apr 2 02:29:05 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
• Apr 2 02:29:05 user.warn kernel: pter found.
• Apr 2 02:29:05 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
• Apr 2 02:29:05 user.info kernel: r8169 Gigabit Ethernet driver 1.2 loaded
• Apr 2 02:29:05 user.debug kernel: eth0: Identified chip type is 'RTL8169'.
• Apr 2 02:29:05 user.info kernel: eth0: RTL8169 at 0xf8808000, 00:21:27:c9:98:d6, IRQ 10
• Apr 2 02:29:05 user.info kernel: eth0: Auto-negotiation Enabled.
• Apr 2 02:29:05 user.info kernel: eth0: 100Mbps Full-duplex operation.
• Apr 2 02:29:05 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
• Apr 2 02:29:05 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
• Apr 2 02:29:05 user.info kernel: NFORCE3-250: IDE controller at PCI slot 00:08.0
• Apr 2 02:29:05 user.info kernel: NFORCE3-250: chipset revision 162
• Apr 2 02:29:05 user.info kernel: NFORCE3-250: not 100% native mode: will probe irqs later
• Apr 2 02:29:05 user.warn kernel: NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
• Apr 2 02:29:05 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
• Apr 2 02:29:05 user.info kernel: NFORCE3-250: 00:08.0 (rev a2) UDMA133 controller
• Apr 2 02:29:05 user.info kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
• Apr 2 02:29:05 user.info kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
• Apr 2 02:29:05 user.warn kernel: hda: CF 2GB, ATA DISK drive
• Apr 2 02:29:05 user.warn kernel: hdb: MDT MD2500BB-00DWA0, ATA DISK drive
• Apr 2 02:29:05 user.warn kernel: hdc: WDC WD5000AAKB-00YSA0, ATA DISK drive
• Apr 2 02:29:05 user.warn kernel: hdd: WDC WD5000AAKB-00YSA0, ATA DISK drive
• Apr 2 02:29:05 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
• Apr 2 02:29:05 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
• Apr 2 02:29:05 user.warn kernel: hda: attached ide-disk driver.
• Apr 2 02:29:05 user.info kernel: hda: 3964464 sectors (2030 MB) w/1KiB Cache, CHS=983/64/63, DMA
• Apr 2 02:29:05 user.warn kernel: hdb: attached ide-disk driver.
• Apr 2 02:29:05 user.warn kernel: hdb: host protected area => 1
• Apr 2 02:29:05 user.info kernel: hdb: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100)
• Apr 2 02:29:05 user.warn kernel: hdc: attached ide-disk driver.
• Apr 2 02:29:05 user.warn kernel: hdc: host protected area => 1
• Apr 2 02:29:05 user.info kernel: hdc: 976773168 sectors (500108 MB) w/16384KiB Cache, CHS=60801/255/63, UDMA(33)
• Apr 2 02:29:05 user.warn kernel: hdd: attached ide-disk driver.
• Apr 2 02:29:05 user.warn kernel: hdd: host protected area => 1
• Apr 2 02:29:05 user.info kernel: hdd: 976773168 sectors (500108 MB) w/16384KiB Cache, CHS=60801/255/63, UDMA(33)
• Apr 2 02:29:05 user.info kernel: Partition check:
• Apr 2 02:29:05 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2
• Apr 2 02:29:05 user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
• Apr 2 02:29:05 user.info kernel: /dev/ide/host0/bus1/target0/lun0: p1
• Apr 2 02:29:05 user.info kernel: /dev/ide/host0/bus1/target1/lun0: p1
• Apr 2 02:29:05 user.info kernel: SCSI subsystem driver Revision: 1.00
• Apr 2 02:29:05 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
• Apr 2 02:29:05 user.info kernel: Detecting Adaptec I2O RAID controllers.
• Apr 2 02:29:05 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
• Apr 2 02:29:05 user.warn kernel: scsi: Detection failed (no card)
• Apr 2 02:29:05 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
• Apr 2 02:29:05 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
• Apr 2 02:29:05 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
• Apr 2 02:29:05 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
• Apr 2 02:29:05 user.warn kernel: 3w-xxxx: No cards found.
• Apr 2 02:29:05 user.debug kernel: libata version 1.20 loaded.
• Apr 2 02:29:05 user.debug kernel: PCI(00:0a.0): version 0.8
• Apr 2 02:29:05 user.debug kernel: PCI: Setting latency timer of device 00:0a.0 to 64
• Apr 2 02:29:05 user.info kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE900 irq 11
• Apr 2 02:29:05 user.info kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE908 irq 11
• Apr 2 02:29:05 user.info kernel: ata1: no device found (phy stat 00000000)
• Apr 2 02:29:05 user.info kernel: ata2: no device found (phy stat 00000000)
• Apr 2 02:29:05 user.info kernel: scsi1 : sata_nv
• Apr 2 02:29:05 user.info kernel: scsi2 : sata_nv
• Apr 2 02:29:05 user.info kernel: ohci1394: $Rev: 1045 $ Ben Collins
• Apr 2 02:29:05 user.info kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[3] MMIO=[ed021000-ed0217ff] Max Packet=[2]
• Apr 2 02:29:05 user.info kernel: raw1394: /dev/raw1394 device initialized
• Apr 2 02:29:05 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
• Apr 2 02:29:05 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
• Apr 2 02:29:05 user.info kernel: usb.c: registered new driver usbdevfs
• Apr 2 02:29:05 user.info kernel: usb.c: registered new driver hub
• Apr 2 02:29:05 user.debug kernel: PCI: Setting latency timer of device 00:02.2 to 64
• Apr 2 02:29:05 user.info kernel: ehci_hcd 00:02.2: PCI device 10de:00e8
• Apr 2 02:29:05 user.info kernel: ehci_hcd 00:02.2: irq 11, pci mem f880e000
• Apr 2 02:29:05 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
• Apr 2 02:29:05 user.debug kernel: PCI: cache line size of 64 is not supported by device 00:02.2
• Apr 2 02:29:05 user.info kernel: ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
• Apr 2 02:29:05 user.info kernel: hub.c: USB hub found
• Apr 2 02:29:05 user.info kernel: hub.c: 8 ports detected
• Apr 2 02:29:05 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
• Apr 2 02:29:05 user.debug kernel: PCI: Setting latency timer of device 00:02.0 to 64
• Apr 2 02:29:05 user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xf8810000, IRQ 4
• Apr 2 02:29:05 user.info kernel: host/usb-ohci.c: usb-00:02.0, PCI device 10de:00e7
• Apr 2 02:29:05 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
• Apr 2 02:29:05 user.info kernel: hub.c: USB hub found
• Apr 2 02:29:05 user.info kernel: hub.c: 4 ports detected
• Apr 2 02:29:05 user.debug kernel: PCI: Setting latency timer of device 00:02.1 to 64
• Apr 2 02:29:05 user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xf8812000, IRQ 11
• Apr 2 02:29:05 user.info kernel: e7
• Apr 2 02:29:05 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
• Apr 2 02:29:05 user.info kernel: hub.c: USB hub found
• Apr 2 02:29:05 user.info kernel: hub.c: 4 ports detected
• Apr 2 02:29:05 user.info kernel: usb.c: registered new driver usbkbd
• Apr 2 02:29:05 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
• Apr 2 02:29:05 user.info kernel: Initializing USB Mass Storage driver.
• Apr 2 02:29:05 user.info kernel: usb.c: registered new driver usb-storage
• Apr 2 02:29:05 user.info kernel: USB Mass Storage support registered.
• Apr 2 02:29:05 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
• Apr 2 02:29:05 user.info kernel: IP Protocols: ICMP, UDP, TCP
• Apr 2 02:29:05 user.info kernel: IP: routing cache hash table of 16384 buckets, 128Kbytes
• Apr 2 02:29:05 user.info kernel: TCP: Hash tables configured (established 262144 bind 65536)
• Apr 2 02:29:05 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
• Apr 2 02:29:05 user.notice kernel: RAMDISK: NASLite file system found at block 0
• Apr 2 02:29:05 user.warn kernel: <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106005350d195]
• Apr 2 02:29:05 user.warn kernel: <6>hub.c: new USB device 00:02.2-6, assigned address 2
• Apr 2 02:29:05 user.warn kernel: .<3>usb.c: USB device not accepting new address=2 (error=-71)
• Apr 2 02:29:05 user.warn kernel: .<6>hub.c: new USB device 00:02.2-6, assigned address 3
• Apr 2 02:29:05 user.warn kernel: <6>scsi3 : SCSI emulation for USB Mass Storage devices
• Apr 2 02:29:05 user.warn kernel: Vendor: Generic Model: USB SD Reader Rev: 1.00
• Apr 2 02:29:05 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
• Apr 2 02:29:05 user.warn kernel: <6>Freeing initrd memory: 1962k freed
• Apr 2 02:29:05 user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
• Apr 2 02:29:05 user.warn kernel: VFS: Mounted root (ext2 filesystem).
• Apr 2 02:29:05 user.info kernel: Mounted devfs on /dev
• Apr 2 02:29:05 user.info kernel: Freeing unused kernel memory: 540k freed
• Apr 2 02:29:05 user.warn kernel: Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: unable to read partition table
• Apr 2 02:29:05 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
• Apr 2 02:29:05 user.debug kernel: USB Mass Storage device found at 3
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.warn kernel: sda: test WP failed, assume Write Enabled
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: unable to read partition table
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 8
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.warn kernel: sda: test WP failed, assume Write Enabled
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: unable to read partition table
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 8
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.warn kernel: sda: test WP failed, assume Write Enabled
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: unable to read partition table
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.warn kernel: sda: test WP failed, assume Write Enabled
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: unable to read partition table
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.warn kernel: sda: test WP failed, assume Write Enabled
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: unable to read partition table
• Apr 2 02:29:05 user.debug kernel: VFS: Disk change detected on device 08:00
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.warn kernel: sda: test WP failed, assume Write Enabled
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.debug kernel: VFS: Disk change detected on device 08:00
• Apr 2 02:29:05 user.notice kernel: sda: Unit Not Ready, sense:
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current 00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : READ CAPACITY failed.
• Apr 2 02:29:05 user.warn kernel: sda : status = 1, message = 00, host = 0, driver = 08
• Apr 2 02:29:05 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
• Apr 2 02:29:05 user.warn kernel: ASC=3a ASCQ= 0
• Apr 2 02:29:05 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x00 0x00 0x00 0x00
• Apr 2 02:29:05 user.warn kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
• Apr 2 02:29:05 user.warn kernel: sda: test WP failed, assume Write Enabled
• Apr 2 02:29:05 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.warn kernel: I/O error: dev 08:00, sector 0
• Apr 2 02:29:05 user.info kernel: kjournald starting. Commit interval 5 seconds
• Apr 2 02:29:05 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
• Apr 2 02:29:05 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
• Apr 2 02:29:05 user.err kernel: ext3: No journal on filesystem on ide1(22,1)
• Apr 2 02:29:05 user.err kernel: ext3: No journal on filesystem on ide1(22,65)
• Apr 2 10:24:44 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
• Apr 2 10:24:44 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
• Apr 2 10:24:44 user.info kernel: BIOS-provided physical RAM map:
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 000000004fff0000 - 000000004fff3000 (ACPI NVS)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 000000004fff3000 - 0000000050000000 (ACPI data)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
• Apr 2 10:24:44 user.warn kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
• Apr 2 10:24:44 user.notice kernel: 383MB HIGHMEM available.
• Apr 2 10:24:44 user.notice kernel: 896MB LOWMEM available.
• Apr 2 10:24:44 user.warn kernel: On node 0 totalpages: 327664
• Apr 2 10:24:44 user.warn kernel: zone(0): 4096 pages.
• Apr 2 10:24:44 user.warn kernel: zone(1): 225280 pages.
• Apr 2 10:24:44 user.warn kernel: zone(2): 98288 pages.
• Apr 2 10:24:44 user.info kernel: ACPI: RSDP (v000 Nvidia ) @ 0x000f90f0
• Apr 2 10:24:44 user.info kernel: ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x4fff3000
• Apr 2 10:24:44 user.info kernel: ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x4fff3040
• Apr 2 10:24:44 user.info kernel: ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
• Apr 2 10:24:44 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
• Apr 2 10:24:44 user.info kernel: Initializing CPU#0
• Apr 2 10:24:44 user.warn kernel: Detected 2020.086 MHz processor.
• Apr 2 10:24:44 user.warn kernel: Console: colour VGA+ 80x25
• Apr 2 10:24:44 user.warn kernel: Calibrating delay loop. 4023.91 BogoMIPS
• Apr 2 10:24:44 user.info kernel: Memory: 1289232k/1310656k available (2214k kernel code, 21036k reserved, 642k data, 540k init, 393152k highmem)
• Apr 2 10:24:44 user.info kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
• Apr 2 10:24:44 user.info kernel: Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
• Apr 2 10:24:44 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
• Apr 2 10:24:44 user.info kernel: Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
• Apr 2 10:24:44 user.warn kernel: Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
• Apr 2 10:24:44 user.info kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
• Apr 2 10:24:44 user.info kernel: CPU: L2 Cache: 512K (64 bytes/line)
• Apr 2 10:24:44 user.debug kernel: CPU: After generic, caps: 078bfbff e3d3fbff 00000000 00000000
• Apr 2 10:24:44 user.debug kernel: CPU: Common caps: 078bfbff e3d3fbff 00000000 00000000
• Apr 2 10:24:44 user.warn kernel: CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
• Apr 2 10:24:44 user.info kernel: Enabling fast FPU save and restore. done.
• Apr 2 10:24:44 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
• Apr 2 10:24:44 user.info kernel: Checking 'hlt' instruction. OK.
• Apr 2 10:24:44 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
• Apr 2 10:24:44 user.warn kernel: POSIX conformance testing by UNIFIX
• Apr 2 10:24:44 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
• Apr 2 10:24:44 user.warn kernel: mtrr: detected mtrr type: Intel
• Apr 2 10:24:44 user.info kernel: ACPI: Subsystem revision 20040326
• Apr 2 10:24:44 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb9b0, last bus=2
• Apr 2 10:24:44 user.info kernel: PCI: Using configuration type 1
• Apr 2 10:24:44 user.info kernel: ACPI: Interpreter enabled
• Apr 2 10:24:44 user.info kernel: ACPI: Using PIC for interrupt routing
• Apr 2 10:24:44 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
• Apr 2 10:24:44 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
• Apr 2 10:24:44 user.warn kernel: PCI: Probing PCI hardware (bus 00)
• Apr 2 10:24:44 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
• Apr 2 10:24:44 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
• Apr 2 10:24:44 user.info kernel: ACPI: Power Resource [ISAV] (on)
• Apr 2 10:24:44 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 10 11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 *12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:24:44 user.info kernel: PCI: Probing PCI hardware
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 11
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 4
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 12
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
• Apr 2 10:24:44 user.warn kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
• Apr 2 10:24:44 user.info kernel: PCI: Using ACPI for IRQ routing
• Apr 2 10:24:44 user.info kernel: Linux NET4.0 for Linux 2.4
• Apr 2 10:24:44 user.info kernel: Based upon Swansea University Computer Society NET3.039
• Apr 2 10:24:44 user.warn kernel: Initializing RT netlink socket
• Apr 2 10:24:44 user.warn kernel: Starting kswapd
• Apr 2 10:24:44 user.warn kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
• Apr 2 10:24:44 user.info kernel: Journalled Block Device driver loaded
• Apr 2 10:24:44 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
• Apr 2 10:24:44 user.info kernel: devfs: boot_options: 0x1
• Apr 2 10:24:44 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
• Apr 2 10:24:44 user.info kernel: ACPI: Power Button (FF) [PWRF]
• Apr 2 10:24:44 user.info kernel: ACPI: Fan [FAN] (on)
• Apr 2 10:24:44 user.info kernel: ACPI: Processor [CPU0] (supports C1)
• Apr 2 10:24:44 user.info kernel: ACPI: Thermal Zone [THRM] (0 C)
• Apr 2 10:24:44 user.warn kernel: pty: 256 Unix98 ptys configured
• Apr 2 10:24:44 user.info kernel: Real Time Clock Driver v1.10f
• Apr 2 10:24:44 user.info kernel: Floppy drive(s): fd0 is 1.44M
• Apr 2 10:24:44 user.warn kernel: floppy0: no floppy controllers found
• Apr 2 10:24:44 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
• Apr 2 10:24:44 user.info kernel: loop: loaded (max 8 devices)
• Apr 2 10:24:44 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
• Apr 2 10:24:44 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
• Apr 2 10:24:44 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
• Apr 2 10:24:44 user.warn kernel: FW Version=$Version$
• Apr 2 10:24:44 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
• Apr 2 10:24:44 user.info kernel: ThunderLAN driver v1.15
• Apr 2 10:24:44 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
• Apr 2 10:24:44 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
• Apr 2 10:24:44 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
• Apr 2 10:24:44 user.warn kernel: sk98lin: No adapter found.
• Apr 2 10:24:44 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
• Apr 2 10:24:44 user.info kernel: r8169 Gigabit Ethernet driver 1.2 loaded
• Apr 2 10:24:44 user.debug kernel: eth0: Identified chip type is 'RTL8169'.
• Apr 2 10:24:44 user.info kernel: eth0: RTL8169 at 0xf8808000, 00:21:27:c9:98:d6, IRQ 10
• Apr 2 10:24:44 user.info kernel: eth0: Auto-negotiation Enabled.
• Apr 2 10:24:44 user.info kernel: eth0: 100Mbps Full-duplex operation.
• Apr 2 10:24:44 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
• Apr 2 10:24:44 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
• Apr 2 10:24:44 user.info kernel: NFORCE3-250: IDE controller at PCI slot 00:08.0
• Apr 2 10:24:44 user.info kernel: NFORCE3-250: chipset revision 162
• Apr 2 10:24:44 user.info kernel: NFORCE3-250: not 100% native mode: will probe irqs later
• Apr 2 10:24:44 user.warn kernel: NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
• Apr 2 10:24:44 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
• Apr 2 10:24:44 user.info kernel: NFORCE3-250: 00:08.0 (rev a2) UDMA133 controller
• Apr 2 10:24:44 user.info kernel: 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
• Apr 2 10:24:44 user.info kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
• Apr 2 10:24:44 user.warn kernel: hda: CF 2GB, ATA DISK drive
• Apr 2 10:24:44 user.warn kernel: hdb: MDT MD2500BB-00DWA0, ATA DISK drive
• Apr 2 10:24:44 user.warn kernel: hdc: WDC WD5000AAKB-00YSA0, ATA DISK drive
• Apr 2 10:24:44 user.warn kernel: hdd: WDC WD5000AAKB-00YSA0, ATA DISK drive
• Apr 2 10:24:44 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
• Apr 2 10:24:44 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
• Apr 2 10:24:44 user.warn kernel: hda: attached ide-disk driver.
• Apr 2 10:24:44 user.info kernel: hda: 3964464 sectors (2030 MB) w/1KiB Cache, CHS=983/64/63, DMA
• Apr 2 10:24:44 user.warn kernel: hdb: attached ide-disk driver.
• Apr 2 10:24:44 user.warn kernel: hdb: host protected area => 1
• Apr 2 10:24:44 user.info kernel: hdb: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100)
• Apr 2 10:24:44 user.warn kernel: hdc: attached ide-disk driver.
• Apr 2 10:24:44 user.warn kernel: hdc: host protected area => 1
• Apr 2 10:24:44 user.info kernel: hdc: 976773168 sectors (500108 MB) w/16384KiB Cache, CHS=60801/255/63, UDMA(33)
• Apr 2 10:24:44 user.warn kernel: hdd: attached ide-disk driver.
• Apr 2 10:24:44 user.warn kernel: hdd: host protected area => 1
• Apr 2 10:24:44 user.info kernel: hdd: 976773168 sectors (500108 MB) w/16384KiB Cache, CHS=60801/255/63, UDMA(33)
• Apr 2 10:24:44 user.info kernel: Partition check:
• Apr 2 10:24:44 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2
• Apr 2 10:24:44 user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
• Apr 2 10:24:44 user.info kernel: /dev/ide/host0/bus1/target0/lun0: p1
• Apr 2 10:24:44 user.info kernel: /dev/ide/host0/bus1/target1/lun0: p1
• Apr 2 10:24:44 user.info kernel: SCSI subsystem driver Revision: 1.00
• Apr 2 10:24:44 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
• Apr 2 10:24:44 user.info kernel: Detecting Adaptec I2O RAID controllers.
• Apr 2 10:24:44 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
• Apr 2 10:24:44 user.warn kernel: scsi: Detection failed (no card)
• Apr 2 10:24:44 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
• Apr 2 10:24:44 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
• Apr 2 10:24:44 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
• Apr 2 10:24:44 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
• Apr 2 10:24:44 user.warn kernel: 3w-xxxx: No cards found.
• Apr 2 10:24:44 user.debug kernel: libata version 1.20 loaded.
• Apr 2 10:24:44 user.debug kernel: PCI(00:0a.0): version 0.8
• Apr 2 10:24:44 user.debug kernel: PCI: Setting latency timer of device 00:0a.0 to 64
• Apr 2 10:24:44 user.info kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE900 irq 11
• Apr 2 10:24:44 user.info kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE908 irq 11
• Apr 2 10:24:44 user.info kernel: ata1: no device found (phy stat 00000000)
• Apr 2 10:24:44 user.info kernel: ata2: no device found (phy stat 00000000)
• Apr 2 10:24:44 user.info kernel: scsi1 : sata_nv
• Apr 2 10:24:44 user.info kernel: scsi2 : sata_nv
• Apr 2 10:24:44 user.info kernel: ohci1394: $Rev: 1045 $ Ben Collins
• Apr 2 10:24:44 user.info kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[3] MMIO=[ed021000-ed0217ff] Max Packet=[2]
• Apr 2 10:24:44 user.info kernel: raw1394: /dev/raw1394 device initialized
• Apr 2 10:24:44 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
• Apr 2 10:24:44 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
• Apr 2 10:24:44 user.info kernel: usb.c: registered new driver usbdevfs
• Apr 2 10:24:44 user.info kernel: usb.c: registered new driver hub
• Apr 2 10:24:44 user.debug kernel: PCI: Setting latency timer of device 00:02.2 to 64
• Apr 2 10:24:44 user.info kernel: ehci_hcd 00:02.2: PCI device 10de:00e8
• Apr 2 10:24:44 user.info kernel: ehci_hcd 00:02.2: irq 11, pci mem f880e000
• Apr 2 10:24:44 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
• Apr 2 10:24:44 user.debug kernel: PCI: cache line size of 64 is not supported by device 00:02.2
• Apr 2 10:24:44 user.info kernel: ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
• Apr 2 10:24:44 user.info kernel: hub.c: USB hub found
• Apr 2 10:24:44 user.info kernel: hub.c: 8 ports detected
• Apr 2 10:24:44 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
• Apr 2 10:24:44 user.debug kernel: PCI: Setting latency timer of device 00:02.0 to 64
• Apr 2 10:24:44 user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xf8810000, IRQ 4
• Apr 2 10:24:44 user.info kernel: host/usb-ohci.c: usb-00:02.0, PCI device 10de:00e7
• Apr 2 10:24:44 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
• Apr 2 10:24:44 user.info kernel: hub.c: USB hub found
• Apr 2 10:24:44 user.info kernel: hub.c: 4 ports detected
• Apr 2 10:24:44 user.debug kernel: PCI: Setting latency timer of device 00:02.1 to 64
• Apr 2 10:24:44 user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xf8812000, IRQ 11
• Apr 2 10:24:44 user.info kernel: host/usb-ohci.c: usb-00:02.1, PCI device 10de:00e7
• Apr 2 10:24:44 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
• Apr 2 10:24:44 user.info kernel: hub.c: USB hub found
• Apr 2 10:24:44 user.info kernel: hub.c: 4 ports detected
• Apr 2 10:24:44 user.info kernel: usb.c: registered new driver usbkbd
• Apr 2 10:24:44 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
• Apr 2 10:24:44 user.info kernel: Initializing USB Mass Storage driver.
• Apr 2 10:24:44 user.info kernel: usb.c: registered new driver usb-storage
• Apr 2 10:24:44 user.info kernel: USB Mass Storage support registered.
• Apr 2 10:24:44 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
• Apr 2 10:24:44 user.info kernel: IP Protocols: ICMP, UDP, TCP
• Apr 2 10:24:44 user.info kernel: IP: routing cache hash table of 16384 buckets, 128Kbytes
• Apr 2 10:24:44 user.info kernel: TCP: Hash tables configured (established 262144 bind 65536)
• Apr 2 10:24:44 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
• Apr 2 10:24:44 user.notice kernel: RAMDISK: NASLite file system found at block 0
• Apr 2 10:24:44 user.warn kernel: <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106005350d195]
• Apr 2 10:24:44 user.warn kernel: .<6>hub.c: new USB device 00:02.2-6, assigned address 2
• Apr 2 10:24:44 user.warn kernel: .<3>usb.c: USB device not accepting new address=2 (error=-71)
• Apr 2 10:24:44 user.warn kernel: .<6>hub.c: new USB device 00:02.2-6, assigned address 3
• Apr 2 10:24:44 user.warn kernel: .<3>usb.c: USB device not accepting new address=3 (error=-71)
• Apr 2 10:24:44 user.warn kernel: .<6>Freeing initrd memory: 1962k freed
• Apr 2 10:24:44 user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
• Apr 2 10:24:44 user.warn kernel: VFS: Mounted root (ext2 filesystem).
• Apr 2 10:24:44 user.info kernel: Mounted devfs on /dev
• Apr 2 10:24:44 user.info kernel: Freeing unused kernel memory: 540k freed
• Apr 2 10:24:44 user.info kernel: kjournald starting. Commit interval 5 seconds
• Apr 2 10:24:44 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
• Apr 2 10:24:44 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
• Apr 2 10:24:44 user.err kernel: ext3: No journal on filesystem on ide1(22,1)
• Apr 2 10:24:44 user.err kernel: ext3: No journal on filesystem on ide1(22,65)
• Apr 2 10:52:07 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
• Apr 2 10:52:07 user.info kernel: (IRQs 3 4 5 6 7 *10 11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 *12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
• Apr 2 10:52:07 user.info kernel: PCI: Probing PCI hardware
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 11
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 4
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 12
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
• Apr 2 10:52:07 user.warn kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
• Apr 2 10:52:07 user.info kernel: PCI: Using ACPI for IRQ routing
• Apr 2 10:52:07 user.info kernel: Linux NET4.0 for Linux 2.4
• Apr 2 10:52:07 user.info kernel: Based upon Swansea University Computer Society NET3.039
• Apr 2 10:52:07 user.warn kernel: Initializing RT netlink socket
• Apr 2 10:52:07 user.warn kernel: Starting kswapd
• Apr 2 10:52:07 user.warn kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
• Apr 2 10:52:07 user.info kernel: Journalled Block Device driver loaded
• Apr 2 10:52:07 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
• Apr 2 10:52:07 user.info kernel: devfs: boot_options: 0x1
• Apr 2 10:52:07 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
• Apr 2 10:52:07 user.info kernel: ACPI: Power Button (FF) [PWRF]
• Apr 2 10:52:07 user.info kernel: ACPI: Fan [FAN] (on)
• Apr 2 10:52:07 user.info kernel: ACPI: Processor [CPU0] (supports C1)
• Apr 2 10:52:07 user.info kernel: ACPI: Thermal Zone [THRM] (0 C)
• Apr 2 10:52:07 user.warn kernel: pty: 256 Unix98 ptys configured
• Apr 2 10:52:07 user.info kernel: Real Time Clock Driver v1.10f
• Apr 2 10:52:07 user.info kernel: Floppy drive(s): fd0 is 1.44M
• Apr 2 10:52:07 user.warn kernel: floppy0: no floppy controllers found
• Apr 2 10:52:07 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
•

have you installed the HDD version on a hard drive as well as the flash card - i did that and it confused the hell out of the system - there is a function in the HDD install to clean the version off the HD - i forgot to do that - once i had it then booted off the cf card and found the correct licence every time

Hi all

I found out what the problem was. Although I had disabled the on board network card in the BIOS, Naslite was seeing it everyonce in a while. I am not sure how or why. Any ideas?

In order to get the system going, I re-enabled the on-board network card.

So my new questions are. If someone want to add a gigabyte card to the NASLITE system that has an on-board network card, how do they do it, so Naslite does not see the on-board network card? I have checked my mother board and the only way to turn off the on-board card is though the BIOS as there are no jumpers for it.

thanks

Buggy BIOS can cause all kinds of problems including what you are experiencing. There is a way however, so you can have the on-board NIC enabled and install an add-on NIC. With the two NICs you'll have to select "FIRST" or "LAST" using the NASLite-2 Admin Network Menu. The add-on NIC will usually be the last one since it will get initialized after the on-board device.

Hope that helps...