NASLite Network Attached Storage

System Message Log:

    * Sep 1 08:48:13 syslog.info syslogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
    * Sep 1 08:48:13 daemon.info init: ^MStarting pid 2230, console /dev/null: '/sbin/klogd'
    * Sep 1 08:48:13 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
    * Sep 1 08:48:13 user.warn kernel: Linux version 2.4.34.NASLite (root@tzt) (gcc version 3.4.6) #2 Tue Jun 5 21:17:32 EDT 2007
    * Sep 1 08:48:13 user.info kernel: BIOS-provided physical RAM map:
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 0000000000100000 - 000000001ff74000 (usable)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 000000001ff74000 - 000000001ff76000 (ACPI NVS)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 000000001ff76000 - 000000001ff97000 (ACPI data)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 000000001ff97000 - 0000000020000000 (reserved)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
    * Sep 1 08:48:13 user.warn kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    * Sep 1 08:48:13 user.notice kernel: 0MB HIGHMEM available.
    * Sep 1 08:48:13 user.notice kernel: 511MB LOWMEM available.
    * Sep 1 08:48:13 user.warn kernel: On node 0 totalpages: 130932
    * Sep 1 08:48:13 user.warn kernel: zone(0): 4096 pages.
    * Sep 1 08:48:13 user.warn kernel: zone(1): 126836 pages.
    * Sep 1 08:48:13 user.warn kernel: zone(2): 0 pages.
    * Sep 1 08:48:13 user.info kernel: ACPI: RSDP (v000 DELL ) @ 0x000feb90
    * Sep 1 08:48:13 user.info kernel: ACPI: RSDT (v001 DELL PE400SC 0x00000008 ASL 0x00000061) @ 0x000fd14f
    * Sep 1 08:48:13 user.info kernel: ACPI: FADT (v001 DELL PE400SC 0x00000008 ASL 0x00000061) @ 0x000fd187
    * Sep 1 08:48:13 user.info kernel: ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc8e67
    * Sep 1 08:48:13 user.info kernel: ACPI: MADT (v001 DELL PE400SC 0x00000008 ASL 0x00000061) @ 0x000fd1fb
    * Sep 1 08:48:13 user.info kernel: ACPI: BOOT (v001 DELL PE400SC 0x00000008 ASL 0x00000061) @ 0x000fd267
    * Sep 1 08:48:13 user.info kernel: ACPI: ASF! (v016 DELL PE400SC 0x00000008 ASL 0x00000061) @ 0x000fd28f
    * Sep 1 08:48:13 user.info kernel: ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
    * Sep 1 08:48:13 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
    * Sep 1 08:48:13 user.info kernel: Initializing CPU#0
    * Sep 1 08:48:13 user.warn kernel: Detected 2261.019 MHz processor.
    * Sep 1 08:48:13 user.warn kernel: Console: colour VGA+ 80x25
    * Sep 1 08:48:13 user.warn kernel: Calibrating delay loop. 4508.87 BogoMIPS
    * Sep 1 08:48:13 user.info kernel: Memory: 511936k/523728k available (2193k kernel code, 11408k reserved, 636k data, 536k init, 0k highmem)
    * Sep 1 08:48:13 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
    * Sep 1 08:48:13 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
    * Sep 1 08:48:13 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    * Sep 1 08:48:13 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
    * Sep 1 08:48:13 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
    * Sep 1 08:48:13 user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
    * Sep 1 08:48:13 user.info kernel: CPU: L2 cache: 512K
    * Sep 1 08:48:13 user.debug kernel: CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
    * Sep 1 08:48:13 user.debug kernel: CPU: Common caps: 3febfbff 00000000 00000000 00000000
    * Sep 1 08:48:13 user.warn kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 04
    * Sep 1 08:48:13 user.info kernel: Enabling fast FPU save and restore. done.
    * Sep 1 08:48:13 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
    * Sep 1 08:48:13 user.info kernel: Checking 'hlt' instruction. OK.
    * Sep 1 08:48:13 user.warn kernel: ACPI: IRQ9 SCI: Level Trigger.
    * Sep 1 08:48:13 user.warn kernel: POSIX conformance testing by UNIFIX
    * Sep 1 08:48:13 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    * Sep 1 08:48:13 user.warn kernel: mtrr: detected mtrr type: Intel
    * Sep 1 08:48:13 user.info kernel: ACPI: Subsystem revision 20040326
    * Sep 1 08:48:13 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfba6d, last bus=3
    * Sep 1 08:48:13 user.info kernel: PCI: Using configuration type 1
    * Sep 1 08:48:13 user.info kernel: ACPI: Interpreter enabled
    * Sep 1 08:48:13 user.info kernel: ACPI: Using PIC for interrupt routing
    * Sep 1 08:48:13 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
    * Sep 1 08:48:13 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    * Sep 1 08:48:13 user.warn kernel: PCI: Probing PCI hardware (bus 00)
    * Sep 1 08:48:13 user.info kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
    * Sep 1 08:48:13 user.warn kernel: Transparent bridge - PCI device 8086:244e
    * Sep 1 08:48:13 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    * Sep 1 08:48:13 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15)
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 15)
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 15)
    * Sep 1 08:48:13 user.info kernel: PCI: Probing PCI hardware
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
    * Sep 1 08:48:13 user.warn kernel: Interrupt Link [LNKH] enabled at IRQ 7
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 4
    * Sep 1 08:48:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
    * Sep 1 08:48:13 user.info kernel: PCI: Using ACPI for IRQ routing
    * Sep 1 08:48:13 user.info kernel: Linux NET4.0 for Linux 2.4
    * Sep 1 08:48:13 user.info kernel: Based upon Swansea University Computer Society NET3.039
    * Sep 1 08:48:13 user.warn kernel: Initializing RT netlink socket
    * Sep 1 08:48:13 user.warn kernel: Starting kswapd
    * Sep 1 08:48:13 user.info kernel: Journalled Block Device driver loaded
    * Sep 1 08:48:13 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    * Sep 1 08:48:13 user.info kernel: devfs: boot_options: 0x1
    * Sep 1 08:48:13 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    * Sep 1 08:48:13 user.info kernel: ACPI: Power Button (FF) [PWRF]
    * Sep 1 08:48:13 user.info kernel: ACPI: Processor [CPU0] (supports C1)
    * Sep 1 08:48:13 user.info kernel: ACPI: Processor [CPU1] (supports C1)
    * Sep 1 08:48:13 user.warn kernel: pty: 256 Unix98 ptys configured
    * Sep 1 08:48:13 user.info kernel: Real Time Clock Driver v1.10f
    * Sep 1 08:48:13 user.info kernel: FDC 0 is a post-1991 82077
    * Sep 1 08:48:13 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    * Sep 1 08:48:13 user.info kernel: loop: loaded (max 8 devices)
    * Sep 1 08:48:13 user.info kernel: Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
    * Sep 1 08:48:13 user.info kernel: Copyright (c) 1999-2004 Intel Corporation.
    * Sep 1 08:48:13 user.info kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    * Sep 1 08:48:13 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
    * Sep 1 08:48:13 user.warn kernel: FW Version=$Version$
    * Sep 1 08:48:13 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
    * Sep 1 08:48:13 user.info kernel: ThunderLAN driver v1.15
    * Sep 1 08:48:13 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
    * Sep 1 08:48:13 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    * Sep 1 08:48:13 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    * Sep 1 08:48:13 user.warn kernel: sk98lin: No adapter found.
    * Sep 1 08:48:13 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
    * Sep 1 08:48:13 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    * Sep 1 08:48:13 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    * Sep 1 08:48:13 user.info kernel: ICH5: IDE controller at PCI slot 00:1f.1
    * Sep 1 08:48:13 user.info kernel: ICH5: chipset revision 2
    * Sep 1 08:48:13 user.info kernel: ICH5: not 100% native mode: will probe irqs later
    * Sep 1 08:48:13 user.info kernel: ICH5: neither IDE port enabled (BIOS)
    * Sep 1 08:48:13 user.info kernel: SCSI subsystem driver Revision: 1.00
    * Sep 1 08:48:13 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
    * Sep 1 08:48:13 user.info kernel: Detecting Adaptec I2O RAID controllers.
    * Sep 1 08:48:13 user.info kernel: Adaptec I2O RAID controller 0 at e0829000 size=100000 irq=3
    * Sep 1 08:48:13 user.info kernel: dpti: If you have a lot of devices this could take a few minutes.
    * Sep 1 08:48:13 user.info kernel: dpti0: Reading the hardware resource table.
    * Sep 1 08:48:13 user.info kernel: TID 008 Vendor: HIGHPOINT Device: IDEhpt370 Rev: 00000001
    * Sep 1 08:48:13 user.info kernel: TID 009 Vendor: HIGHPOINT Device: IDEhpt370 Rev: 00000001
    * Sep 1 08:48:13 user.info kernel: TID 010 Vendor: HIGHPOINT Device: IDEhpt370 Rev: 00000001
    * Sep 1 08:48:13 user.info kernel: TID 011 Vendor: HIGHPOINT Device: IDEhpt370 Rev: 00000001
    * Sep 1 08:48:13 user.info kernel: TID 521 Vendor: ADAPTEC Device: RAID-5 Rev: 3A0L
    * Sep 1 08:48:13 user.info kernel: scsi0 : Vendor: Adaptec Model: 2400A FW:3A0L
    * Sep 1 08:48:13 user.warn kernel: Vendor: ADAPTEC Model: RAID-5 Rev: 3A0L
    * Sep 1 08:48:13 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
    * Sep 1 08:48:13 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Jun 5 2007 21:19:52)
    * Sep 1 08:48:13 user.info kernel: AAC0: kernel 4.1.4 build 7403
    * Sep 1 08:48:13 user.info kernel: AAC0: monitor 4.1.4 build 7403
    * Sep 1 08:48:13 user.info kernel: AAC0: bios 4.1.0 build 7403
    * Sep 1 08:48:13 user.info kernel: AAC0: serial c33116fafaf001
    * Sep 1 08:48:13 user.info kernel: scsi2 : aacraid
    * Sep 1 08:48:13 user.warn kernel: Vendor: DELL Model: TeraArray_SATA Rev: V1.0
    * Sep 1 08:48:13 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
    * Sep 1 08:48:13 user.warn kernel: scsi: Detection failed (no card)
    * Sep 1 08:48:13 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
    * Sep 1 08:48:13 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
    * Sep 1 08:48:13 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
    * Sep 1 08:48:13 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
    * Sep 1 08:48:13 user.warn kernel: 3w-xxxx: No cards found.
    * Sep 1 08:48:13 user.debug kernel: libata version 1.20 loaded.
    * Sep 1 08:48:13 user.debug kernel: PCI(00:1f.2): version 1.05
    * Sep 1 08:48:13 user.debug kernel: PCI: Setting latency timer of device 00:1f.2 to 64
    * Sep 1 08:48:13 user.info kernel: ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 9
    * Sep 1 08:48:13 user.info kernel: ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 9
    * Sep 1 08:48:13 user.warn kernel: ATA: abnormal status 0xFF on port 0xFE07
    * Sep 1 08:48:13 user.warn kernel: ATA: abnormal status 0xFF on port 0xFE27
    * Sep 1 08:48:13 user.info kernel: scsi3 : ata_piix
    * Sep 1 08:48:13 user.info kernel: scsi4 : ata_piix
    * Sep 1 08:48:13 user.warn kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    * Sep 1 08:48:13 user.warn kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
    * Sep 1 08:48:13 user.warn kernel: SCSI device sda: 1465190400 512-byte hdwr sectors (750177 MB)
    * Sep 1 08:48:13 user.info kernel: Partition check:
    * Sep 1 08:48:13 user.info kernel: /dev/scsi/host0/bus0/target0/lun0: p1
    * Sep 1 08:48:13 user.warn kernel: SCSI device sdb: 1953116160 512-byte hdwr sectors (999995 MB)
    * Sep 1 08:48:13 user.info kernel: interrupt: IRQ7.
    * Sep 1 08:48:13 user.warn kernel: p1
    * Sep 1 08:48:13 user.info kernel: raw1394: /dev/raw1394 device initialized
    * Sep 1 08:48:13 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
    * Sep 1 08:48:13 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
    * Sep 1 08:48:13 user.info kernel: usb.c: registered new driver usbdevfs
    * Sep 1 08:48:13 user.info kernel: usb.c: registered new driver hub
    * Sep 1 08:48:13 user.debug kernel: PCI: Setting latency timer of device 00:1d.7 to 64
    * Sep 1 08:48:13 user.info kernel: ehci_hcd 00:1d.7: PCI device 8086:24dd
    * Sep 1 08:48:13 user.info kernel: ehci_hcd 00:1d.7: irq 7, pci mem e092f800
    * Sep 1 08:48:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
    * Sep 1 08:48:13 user.info kernel: ehci_hcd 00:1d.7: enabled 64bit PCI DMA
    * Sep 1 08:48:13 user.debug kernel: PCI: cache line size of 128 is not supported by device 00:1d.7
    * Sep 1 08:48:13 user.info kernel: ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    * Sep 1 08:48:13 user.info kernel: hub.c: USB hub found
    * Sep 1 08:48:13 user.info kernel: hub.c: 8 ports detected
    * Sep 1 08:48:13 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
    * Sep 1 08:48:13 user.debug kernel: PCI: Setting latency timer of device 00:1d.0 to 64
    * Sep 1 08:48:13 user.info kernel: host/uhci.c: USB UHCI at I/O 0xff80, IRQ 11
    * Sep 1 08:48:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
    * Sep 1 08:48:13 user.info kernel: hub.c: USB hub found
    * Sep 1 08:48:13 user.info kernel: hub.c: 2 ports detected
    * Sep 1 08:48:13 user.debug kernel: PCI: Setting latency timer of device 00:1d.1 to 64
    * Sep 1 08:48:13 user.info kernel: host/uhci.c: USB UHCI at I/O 0xff60, IRQ 10
    * Sep 1 08:48:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
    * Sep 1 08:48:13 user.info kernel: hub.c: USB hub found
    * Sep 1 08:48:13 user.info kernel: hub.c: 2 ports detected
    * Sep 1 08:48:13 user.debug kernel: PCI: Setting latency timer of device 00:1d.2 to 64
    * Sep 1 08:48:13 user.info kernel: host/uhci.c: USB UHCI at I/O 0xff40, IRQ 9
    * Sep 1 08:48:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
    * Sep 1 08:48:13 user.info kernel: hub.c: USB hub found
    * Sep 1 08:48:13 user.info kernel: hub.c: 2 ports detected
    * Sep 1 08:48:13 user.debug kernel: PCI: Setting latency timer of device 00:1d.3 to 64
    * Sep 1 08:48:13 user.info kernel: host/uhci.c: USB UHCI at I/O 0xff20, IRQ 11
    * Sep 1 08:48:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 5
    * Sep 1 08:48:13 user.info kernel: hub.c: USB hub found
    * Sep 1 08:48:13 user.info kernel: hub.c: 2 ports detected
    * Sep 1 08:48:13 user.info kernel: usb.c: registered new driver usbkbd
    * Sep 1 08:48:13 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
    * Sep 1 08:48:13 user.info kernel: Initializing USB Mass Storage driver.
    * Sep 1 08:48:13 user.info kernel: usb.c: registered new driver usb-storage
    * Sep 1 08:48:13 user.info kernel: USB Mass Storage support registered.
    * Sep 1 08:48:13 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
    * Sep 1 08:48:13 user.info kernel: IP Protocols: ICMP, UDP, TCP
    * Sep 1 08:48:13 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
    * Sep 1 08:48:13 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
    * Sep 1 08:48:13 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    * Sep 1 08:48:13 user.notice kernel: RAMDISK: NASLite file system found at block 0
    * Sep 1 08:48:13 user.warn kernel: <6>hub.c: new USB device 00:1d.0-1, assigned address 2
    * Sep 1 08:48:13 user.warn kernel: .<6>scsi5 : SCSI emulation for USB Mass Storage devices
    * Sep 1 08:48:13 user.warn kernel: . Vendor: Generic Model: USB SMC Reader Rev: 1.00
    * Sep 1 08:48:13 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
    * Sep 1 08:48:13 user.warn kernel: .Attached scsi removable disk sdc at scsi5, channel 0, id 0, lun 0
    * Sep 1 08:48:13 user.warn kernel: .SCSI device sdc: 64000 512-byte hdwr sectors (33 MB)
    * Sep 1 08:48:13 user.warn kernel: .sdc: Write Protect is off
    * Sep 1 08:48:13 user.info kernel: /dev/scsi/host5/bus0/target0/lun0:.<6>Freeing initrd memory: 1621k freed
    * Sep 1 08:48:13 user.warn kernel: VFS: Mounted root (ext2 filesystem).
    * Sep 1 08:48:13 user.info kernel: Mounted devfs on /dev
    * Sep 1 08:48:13 user.info kernel: Freeing unused kernel memory: 536k freed
    * Sep 1 08:48:13 user.warn kernel: unknown partition table
    * Sep 1 08:48:13 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
    * Sep 1 08:48:13 user.debug kernel: USB Mass Storage device found at 2
    * Sep 1 08:48:13 user.info kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
    * Sep 1 08:48:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Sep 1 08:48:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,17), internal journal
    * Sep 1 08:48:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.