NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Mon May 05, 2025 1:58 am

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Previous topic | Next topic 
Author Message
Dismember
PostPosted: Mon Jul 16, 2007 12:20 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
Hi guys.. me again.. I have an installation with 6 HDD.. 2 SATA 4 IDE.. yesterday when i came in i got some Kernel Errors.. rebooted system let it go.. when i came in today 3 of the disks failed to mount so i went into the disk adminster page tried to do a check and repair.. half way thru the disk check i got an error: kernel BUG at page_alloc.c:144! invallid operand: 0000 the process was SMBD which in my limited understanding of linux thats samba? it continued on its merry way.. having said that i was moving some files from 2 of the disks that were mounted still and the transfer crashed.. are these two errors related? i really need to get one of these disks mounted as it contains all of my business files and i cant do anything until they are back up.. any suggestions?
Top
 Profile  
 
Dismember
 Post subject:
PostPosted: Mon Jul 16, 2007 12:32 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
PS: Samba is now not working.. so I assume it was the transfer that caused the error? is there anyway to restart samba without rebooting the system?
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Mon Jul 16, 2007 9:05 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Can you post a syslog for review? Let the machine run for a few minutes after it generates the kernel errors and then refresh and post the syslog.

My immediate guess is RAM or heat but that's just a guess. :wink:
Top
 Profile  
 
Dismember
 Post subject:
PostPosted: Tue Jul 17, 2007 7:02 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
I would if i knew how to do that.. it is running a Cel 2.5 with the standard heatsink and fan which is running at all times.. as for ram i have 512 Mb of DDR the NAS system seems to crash whenever i try and copy large amounts of data.. this time i was moving 35Gb from one machine to the NAS disk 2 which on reboot failed during booting.. all of the drives are seagate barracuda 120's there seems to be no rhymne between if it is SATA or EIDE.. This is getting rather tiresome making me regret my purchase of this operating system..
Top
 Profile  
 
Dismember
 Post subject:
PostPosted: Tue Jul 17, 2007 7:15 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
ok crashed during diskcheck.. and on reboot my unlock code failed.. this is getting weird..
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Tue Jul 17, 2007 8:37 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Try turning ACPI off in the BIOS and try again. Also make sure the NIC and drive controllers use unique IRQs.

You can fetch the syslog from the status screens.
Top
 Profile  
 
Dismember
 Post subject:
PostPosted: Tue Jul 17, 2007 8:55 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
There is no option to turn off the ACPI.. only S1 and S3.. it was on S1 switched it to S3.. is that it?
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Tue Jul 17, 2007 11:18 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Is there an option to disable power management? If so, disable it.
Top
 Profile  
 
Dismember
 Post subject:
PostPosted: Thu Jul 19, 2007 5:37 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
Here is the most recent crash syslog.. sanba crashed earlier today and on restart i tried to fix disk 3..

* Jul 19 17:52:19 syslog.info syslogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
* Jul 19 17:52:19 daemon.info init: ^MStarting pid 2967, console /dev/null: '/sbin/klogd'
* Jul 19 17:52:19 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
* Jul 19 17:52:19 user.warn kernel: Linux version 2.4.34.NASLite (root@tzt) (gcc version 3.4.6) #1 Wed Apr 11 22:39:05 EDT 2007
* Jul 19 17:52:19 user.info kernel: BIOS-provided physical RAM map:
* Jul 19 17:52:19 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
* Jul 19 17:52:19 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
* Jul 19 17:52:19 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
* Jul 19 17:52:19 user.warn kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
* Jul 19 17:52:19 user.warn kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
* Jul 19 17:52:19 user.warn kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
* Jul 19 17:52:19 user.warn kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
* Jul 19 17:52:19 user.warn kernel: Warning only 896MB will be used.
* Jul 19 17:52:19 user.warn kernel: Use a HIGHMEM enabled kernel.
* Jul 19 17:52:19 user.notice kernel: 896MB LOWMEM available.
* Jul 19 17:52:19 user.warn kernel: On node 0 totalpages: 229376
* Jul 19 17:52:19 user.warn kernel: zone(0): 4096 pages.
* Jul 19 17:52:19 user.warn kernel: zone(1): 225280 pages.
* Jul 19 17:52:19 user.warn kernel: zone(2): 0 pages.
* Jul 19 17:52:19 user.info kernel: ACPI: RSDP (v000 RX330 ) @ 0x000f6e80
* Jul 19 17:52:19 user.info kernel: ACPI: RSDT (v001 RX330 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
* Jul 19 17:52:19 user.info kernel: ACPI: FADT (v001 RX330 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
* Jul 19 17:52:19 user.info kernel: ACPI: MADT (v001 RX330 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6280
* Jul 19 17:52:19 user.info kernel: ACPI: DSDT (v001 RX330 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
* Jul 19 17:52:19 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
* Jul 19 17:52:19 user.info kernel: Initializing CPU#0
* Jul 19 17:52:19 user.warn kernel: Detected 2545.633 MHz processor.
* Jul 19 17:52:19 user.warn kernel: Console: colour VGA+ 80x25
* Jul 19 17:52:19 user.warn kernel: Calibrating delay loop. 5085.59 BogoMIPS
* Jul 19 17:52:19 user.info kernel: Memory: 902000k/917504k available (2182k kernel code, 15116k reserved, 629k data, 536k init, 0k highmem)
* Jul 19 17:52:19 user.info kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
* Jul 19 17:52:19 user.info kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
* Jul 19 17:52:19 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
* Jul 19 17:52:19 user.info kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
* Jul 19 17:52:19 user.warn kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
* Jul 19 17:52:19 user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
* Jul 19 17:52:19 user.info kernel: CPU: L2 cache: 256K
* Jul 19 17:52:19 user.debug kernel: CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
* Jul 19 17:52:19 user.debug kernel: CPU: Common caps: bfebfbff 00000000 00000000 00000000
* Jul 19 17:52:19 user.warn kernel: CPU: Intel(R) Celeron(R) CPU 2.53GHz stepping 01
* Jul 19 17:52:19 user.info kernel: Enabling fast FPU save and restore. done.
* Jul 19 17:52:19 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
* Jul 19 17:52:19 user.info kernel: Checking 'hlt' instruction. OK.
* Jul 19 17:52:19 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
* Jul 19 17:52:19 user.warn kernel: POSIX conformance testing by UNIFIX
* Jul 19 17:52:19 user.info kernel: ACPI: Subsystem revision 20040326
* Jul 19 17:52:19 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfad40, last bus=2
* Jul 19 17:52:19 user.info kernel: PCI: Using configuration type 1
* Jul 19 17:52:19 user.info kernel: ACPI: Interpreter enabled
* Jul 19 17:52:19 user.info kernel: ACPI: Using PIC for interrupt routing
* Jul 19 17:52:19 user.info kernel: ACPI: System [ACPI] (supports S0 S3 S4bios S5)
* Jul 19 17:52:19 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
* Jul 19 17:52:19 user.warn kernel: PCI: Probing PCI hardware (bus 00)
* Jul 19 17:52:19 user.info kernel: PCI: Ignoring BAR0-3 of IDE controller 00:14.1
* Jul 19 17:52:19 user.warn kernel: Transparent bridge - PCI device 1002:4362
* Jul 19 17:52:19 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
* Jul 19 17:52:19 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *15
* Jul 19 17:52:19 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
* Jul 19 17:52:19 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
* Jul 19 17:52:19 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11)
* Jul 19 17:52:19 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
* Jul 19 17:52:19 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
* Jul 19 17:52:19 user.info kernel: PCI: Probing PCI hardware
* Jul 19 17:52:19 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
* Jul 19 17:52:19 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
* Jul 19 17:52:19 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
* Jul 19 17:52:19 user.info kernel: PCI: Using ACPI for IRQ routing
* Jul 19 17:52:19 user.info kernel: Linux NET4.0 for Linux 2.4
* Jul 19 17:52:19 user.info kernel: Based upon Swansea University Computer Society NET3.039
* Jul 19 17:52:19 user.warn kernel: Initializing RT netlink socket
* Jul 19 17:52:19 user.warn kernel: Starting kswapd
* Jul 19 17:52:19 user.info kernel: Journalled Block Device driver loaded
* Jul 19 17:52:19 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
* Jul 19 17:52:19 user.info kernel: devfs: boot_options: 0x1
* Jul 19 17:52:19 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
* Jul 19 17:52:19 user.info kernel: ACPI: Power Button (FF) [PWRF]
* Jul 19 17:52:19 user.info kernel: ACPI: Processor [CPU0] (supports C1, 8 throttling states)
* Jul 19 17:52:19 user.info kernel: ACPI: Processor [CPU1] (supports C1, 8 throttling states)
* Jul 19 17:52:19 user.warn kernel: pty: 256 Unix98 ptys configured
* Jul 19 17:52:19 user.info kernel: Real Time Clock Driver v1.10f
* Jul 19 17:52:19 user.info kernel: Floppy drive(s): fd0 is 1.44M
* Jul 19 17:52:19 user.info kernel: FDC 0 is a post-1991 82077
* Jul 19 17:52:19 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
* Jul 19 17:52:19 user.info kernel: loop: loaded (max 8 devices)
* Jul 19 17:52:19 user.info kernel: Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
* Jul 19 17:52:19 user.info kernel: tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1.
* Jul 19 17:52:19 user.info kernel: eth0: Lite-On 82c168 PNIC rev 32 at 0x9000, 00:A0:CC:54:04:38, IRQ 10.
* Jul 19 17:52:19 user.info kernel: Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
* Jul 19 17:52:19 user.info kernel: Copyright (c) 1999-2004 Intel Corporation.
* Jul 19 17:52:19 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
* Jul 19 17:52:19 user.warn kernel: FW Version=$Version$
* Jul 19 17:52:19 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
* Jul 19 17:52:19 user.info kernel: ThunderLAN driver v1.15
* Jul 19 17:52:19 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
* Jul 19 17:52:19 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
* Jul 19 17:52:19 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
* Jul 19 17:52:19 user.warn kernel: sk98lin: No adapter found.
* Jul 19 17:52:19 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
* Jul 19 17:52:19 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
* Jul 19 17:52:19 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Jul 19 17:52:19 user.info kernel: ATI-IXP300: IDE controller at PCI slot 00:14.1
* Jul 19 17:52:19 user.info kernel: ATI-IXP300: chipset revision 1
* Jul 19 17:52:19 user.info kernel: ATI-IXP300: not 100% native mode: will probe irqs later
* Jul 19 17:52:19 user.info kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
* Jul 19 17:52:19 user.info kernel: ATI-IXP300: simplex device: DMA disabled
* Jul 19 17:52:19 user.info kernel: ide1: ATI-IXP300 Bus-Master DMA disabled (BIOS)
* Jul 19 17:52:19 user.info kernel: CMD649: IDE controller at PCI slot 02:08.0
* Jul 19 17:52:19 user.info kernel: CMD649: chipset revision 2
* Jul 19 17:52:19 user.info kernel: CMD649: not 100% native mode: will probe irqs later
* Jul 19 17:52:19 user.info kernel: ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
* Jul 19 17:52:19 user.info kernel: ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
* Jul 19 17:52:19 user.warn kernel: hdb: SAMSUNG CD-ROM SC-152A, ATAPI CD/DVD-ROM drive
* Jul 19 17:52:19 user.warn kernel: hde: ST3120022A, ATA DISK drive
* Jul 19 17:52:19 user.warn kernel: hdf: ST3120022A, ATA DISK drive
* Jul 19 17:52:19 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Jul 19 17:52:19 user.warn kernel: hdg: ST3120022A, ATA DISK drive
* Jul 19 17:52:19 user.warn kernel: hdh: ST3120022A, ATA DISK drive
* Jul 19 17:52:19 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
* Jul 19 17:52:19 user.warn kernel: ide2 at 0x9400-0x9407,0x9802 on irq 11
* Jul 19 17:52:19 user.warn kernel: ide3 at 0x9c00-0x9c07,0xa002 on irq 11
* Jul 19 17:52:19 user.warn kernel: hde: attached ide-disk driver.
* Jul 19 17:52:19 user.warn kernel: hde: host protected area => 1
* Jul 19 17:52:19 user.info kernel: hde: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 17:52:19 user.warn kernel: hdf: attached ide-disk driver.
* Jul 19 17:52:19 user.warn kernel: hdf: host protected area => 1
* Jul 19 17:52:19 user.info kernel: hdf: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 17:52:19 user.warn kernel: hdg: attached ide-disk driver.
* Jul 19 17:52:19 user.warn kernel: hdg: host protected area => 1
* Jul 19 17:52:19 user.info kernel: hdg: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 17:52:19 user.warn kernel: hdh: attached ide-disk driver.
* Jul 19 17:52:19 user.warn kernel: hdh: host protected area => 1
* Jul 19 17:52:19 user.info kernel: hdh: setmax_ext LBA 234441648, native 234439535
* Jul 19 17:52:19 user.info kernel: hdh: 234439535 sectors (120033 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 17:52:19 user.info kernel: Partition check:
* Jul 19 17:52:19 user.info kernel: /dev/ide/host2/bus0/target0/lun0: p1
* Jul 19 17:52:19 user.info kernel: /dev/ide/host2/bus0/target1/lun0: p1
* Jul 19 17:52:19 user.info kernel: /dev/ide/host2/bus1/target0/lun0: p1
* Jul 19 17:52:19 user.info kernel: /dev/ide/host2/bus1/target1/lun0: p1
* Jul 19 17:52:19 user.info kernel: SCSI subsystem driver Revision: 1.00
* Jul 19 17:52:19 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Apr 11 2007 22:41:48)
* Jul 19 17:52:19 user.warn kernel: scsi: Detection failed (no card)
* Jul 19 17:52:19 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
* Jul 19 17:52:19 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
* Jul 19 17:52:19 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
* Jul 19 17:52:19 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
* Jul 19 17:52:19 user.warn kernel: 3w-xxxx: No cards found.
* Jul 19 17:52:19 user.debug kernel: libata version 1.20 loaded.
* Jul 19 17:52:19 user.debug kernel: PCI(00:14.2): version 0.9
* Jul 19 17:52:19 user.info kernel: ata1: SATA max UDMA/100 cmd 0xF8809080 ctl 0xF880908A bmdma 0xF8809000 irq 11
* Jul 19 17:52:19 user.info kernel: ata2: SATA max UDMA/100 cmd 0xF88090C0 ctl 0xF88090CA bmdma 0xF8809008 irq 11
* Jul 19 17:52:19 user.debug kernel: ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
* Jul 19 17:52:19 user.info kernel: ata1: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
* Jul 19 17:52:19 user.info kernel: ata1(0): applying Seagate errata fix
* Jul 19 17:52:19 user.info kernel: ata1: dev 0 configured for UDMA/100
* Jul 19 17:52:19 user.debug kernel: ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
* Jul 19 17:52:19 user.info kernel: ata2: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
* Jul 19 17:52:19 user.info kernel: ata2(0): applying Seagate errata fix
* Jul 19 17:52:19 user.info kernel: ata2: dev 0 configured for UDMA/100
* Jul 19 17:52:19 user.info kernel: scsi1 : sata_sil
* Jul 19 17:52:19 user.info kernel: scsi2 : sata_sil
* Jul 19 17:52:19 user.warn kernel: Vendor: ATA Model: ST3120026AS Rev: 3.05
* Jul 19 17:52:19 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 05
* Jul 19 17:52:19 user.warn kernel: Vendor: ATA Model: ST3120026AS Rev: 3.05
* Jul 19 17:52:19 user.warn kernel: ANSI SCSI revision: 05
* Jul 19 17:52:19 user.warn kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
* Jul 19 17:52:19 user.warn kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
* Jul 19 17:52:19 user.warn kernel: SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
* Jul 19 17:52:19 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
* Jul 19 17:52:19 user.warn kernel: SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
* Jul 19 17:52:19 user.info kernel: /dev/scsi/host2/bus0/target0/lun0:spurious 8259A interrupt: IRQ7.
* Jul 19 17:52:19 user.warn kernel: p1
* Jul 19 17:52:19 user.info kernel: raw1394: /dev/raw1394 device initialized
* Jul 19 17:52:19 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
* Jul 19 17:52:19 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
* Jul 19 17:52:19 user.info kernel: usb.c: registered new driver usbdevfs
* Jul 19 17:52:19 user.info kernel: usb.c: registered new driver hub
* Jul 19 17:52:19 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
* Jul 19 17:52:19 user.info kernel: usb.c: registered new driver usbkbd
* Jul 19 17:52:19 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
* Jul 19 17:52:19 user.info kernel: Initializing USB Mass Storage driver.
* Jul 19 17:52:19 user.info kernel: usb.c: registered new driver usb-storage
* Jul 19 17:52:19 user.info kernel: USB Mass Storage support registered.
* Jul 19 17:52:19 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
* Jul 19 17:52:19 user.info kernel: IP Protocols: ICMP, UDP, TCP
* Jul 19 17:52:19 user.info kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
* Jul 19 17:52:19 user.info kernel: TCP: Hash tables configured (established 262144 bind 65536)
* Jul 19 17:52:19 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
* Jul 19 17:52:19 user.notice kernel: RAMDISK: NASLite file system found at block 0
* Jul 19 17:52:19 user.warn kernel: .<6>Freeing initrd memory: 1617k freed
* Jul 19 17:52:19 user.warn kernel: VFS: Mounted root (ext2 filesystem).
* Jul 19 17:52:19 user.info kernel: Mounted devfs on /dev
* Jul 19 17:52:19 user.info kernel: Freeing unused kernel memory: 536k freed
* Jul 19 17:52:19 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.info kernel: eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
* Jul 19 17:52:19 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 17:52:19 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 17:52:19 user.err kernel: ext3: No journal on filesystem on ide2(33,1)
* Jul 19 17:52:19 user.err kernel: ext3: No journal on filesystem on ide3(34,1)
* Jul 19 17:52:19 user.err kernel: ext3: No journal on filesystem on sd(8,1)
* Jul 19 17:52:19 user.err kernel: ext3: No journal on filesystem on sd(8,17)
* Jul 19 17:54:22 auth.info login[2965]: root login on `vc/1'
* Jul 19 17:58:08 user.alert kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000120
* Jul 19 17:58:08 user.warn kernel: printing eip:
* Jul 19 17:58:08 user.warn kernel: c012b300
* Jul 19 17:58:08 user.alert kernel: *pde = 00000000
* Jul 19 17:58:08 user.warn kernel: Oops: 0000
* Jul 19 17:58:08 user.warn kernel: CPU: 0
* Jul 19 17:58:08 user.warn kernel: EIP: 0010:[] Not tainted
* Jul 19 17:58:08 user.warn kernel: EFLAGS: 00010206
* Jul 19 17:58:08 user.warn kernel: eax: 00002241 ebx: 00000100 ecx: 00000000 edx: 00002200
* Jul 19 17:58:08 user.warn kernel: esi: 0001fa42 edi: f7ad23e0 ebp: 00000000 esp: f7fbdf24
* Jul 19 17:58:08 user.warn kernel: ds: 0018 es: 0018 ss: 0018
* Jul 19 17:58:08 user.warn kernel: Process e2fsck (pid: 5082, stackpage=f7fbd000)
* Jul 19 17:58:08 user.warn kernel: Stack: 22412241 00000100 00000000 00000001 f7ad23e0 f7ed6040 00000000 f7f2c8a0
* Jul 19 17:58:08 user.warn kernel: c012e7d0 f7ad23e0 00000001 f7ad23e0 c012f279 f7ad23e0 f5b1d620 c19af320
* Jul 19 17:58:08 user.warn kernel: f7ed6b80 c012f2db f7ad23e0 00000000 c012a9f5 f7ed6b80 f5b1d620 f5b1d620
* Jul 19 17:58:08 user.warn kernel: Call Trace: [] [] [] [] []
* Jul 19 17:58:08 user.warn kernel: [] []
* Jul 19 17:58:08 user.warn kernel:
* Jul 19 17:58:08 user.warn kernel: Code: 8b 43 20 89 44 24 04 66 8b 44 24 02 66 39 43 0c 0f 85 97 00
Top
 Profile  
 
Dismember
 Post subject:
PostPosted: Thu Jul 19, 2007 6:05 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
On reboot again this is the syslog

* Jul 19 18:28:51 syslog.info syslogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
* Jul 19 18:28:51 daemon.info init: ^MStarting pid 2794, console /dev/null: '/sbin/klogd'
* Jul 19 18:28:51 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
* Jul 19 18:28:51 user.warn kernel: Linux version 2.4.34.NASLite (root@tzt) (gcc version 3.4.6) #1 Wed Apr 11 22:39:05 EDT 2007
* Jul 19 18:28:51 user.info kernel: BIOS-provided physical RAM map:
* Jul 19 18:28:51 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
* Jul 19 18:28:51 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
* Jul 19 18:28:51 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
* Jul 19 18:28:51 user.warn kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
* Jul 19 18:28:51 user.warn kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
* Jul 19 18:28:51 user.warn kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
* Jul 19 18:28:51 user.warn kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
* Jul 19 18:28:51 user.warn kernel: Warning only 896MB will be used.
* Jul 19 18:28:51 user.warn kernel: Use a HIGHMEM enabled kernel.
* Jul 19 18:28:51 user.notice kernel: 896MB LOWMEM available.
* Jul 19 18:28:51 user.warn kernel: On node 0 totalpages: 229376
* Jul 19 18:28:51 user.warn kernel: zone(0): 4096 pages.
* Jul 19 18:28:51 user.warn kernel: zone(1): 225280 pages.
* Jul 19 18:28:51 user.warn kernel: zone(2): 0 pages.
* Jul 19 18:28:51 user.info kernel: ACPI: RSDP (v000 RX330 ) @ 0x000f6e80
* Jul 19 18:28:51 user.info kernel: ACPI: RSDT (v001 RX330 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
* Jul 19 18:28:51 user.info kernel: ACPI: FADT (v001 RX330 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
* Jul 19 18:28:51 user.info kernel: ACPI: MADT (v001 RX330 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6280
* Jul 19 18:28:51 user.info kernel: ACPI: DSDT (v001 RX330 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
* Jul 19 18:28:51 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
* Jul 19 18:28:51 user.info kernel: Initializing CPU#0
* Jul 19 18:28:51 user.warn kernel: Detected 2545.675 MHz processor.
* Jul 19 18:28:51 user.warn kernel: Console: colour VGA+ 80x25
* Jul 19 18:28:51 user.warn kernel: Calibrating delay loop. 5085.59 BogoMIPS
* Jul 19 18:28:51 user.info kernel: Memory: 902000k/917504k available (2182k kernel code, 15116k reserved, 629k data, 536k init, 0k highmem)
* Jul 19 18:28:51 user.info kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
* Jul 19 18:28:51 user.info kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
* Jul 19 18:28:51 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
* Jul 19 18:28:51 user.info kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
* Jul 19 18:28:51 user.warn kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
* Jul 19 18:28:51 user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
* Jul 19 18:28:51 user.info kernel: CPU: L2 cache: 256K
* Jul 19 18:28:51 user.debug kernel: CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
* Jul 19 18:28:51 user.debug kernel: CPU: Common caps: bfebfbff 00000000 00000000 00000000
* Jul 19 18:28:51 user.warn kernel: CPU: Intel(R) Celeron(R) CPU 2.53GHz stepping 01
* Jul 19 18:28:51 user.info kernel: Enabling fast FPU save and restore. done.
* Jul 19 18:28:51 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
* Jul 19 18:28:51 user.info kernel: Checking 'hlt' instruction. OK.
* Jul 19 18:28:51 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
* Jul 19 18:28:51 user.warn kernel: POSIX conformance testing by UNIFIX
* Jul 19 18:28:51 user.info kernel: ACPI: Subsystem revision 20040326
* Jul 19 18:28:51 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfad40, last bus=2
* Jul 19 18:28:51 user.info kernel: PCI: Using configuration type 1
* Jul 19 18:28:51 user.info kernel: ACPI: Interpreter enabled
* Jul 19 18:28:51 user.info kernel: ACPI: Using PIC for interrupt routing
* Jul 19 18:28:51 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4bios S5)
* Jul 19 18:28:51 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
* Jul 19 18:28:51 user.warn kernel: PCI: Probing PCI hardware (bus 00)
* Jul 19 18:28:51 user.info kernel: PCI: Ignoring BAR0-3 of IDE controller 00:14.1
* Jul 19 18:28:51 user.warn kernel: Transparent bridge - PCI device 1002:4362
* Jul 19 18:28:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
* Jul 19 18:28:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *15
* Jul 19 18:28:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
* Jul 19 18:28:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
* Jul 19 18:28:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11)
* Jul 19 18:28:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
* Jul 19 18:28:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
* Jul 19 18:28:51 user.info kernel: PCI: Probing PCI hardware
* Jul 19 18:28:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
* Jul 19 18:28:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
* Jul 19 18:28:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
* Jul 19 18:28:51 user.info kernel: PCI: Using ACPI for IRQ routing
* Jul 19 18:28:51 user.info kernel: Linux NET4.0 for Linux 2.4
* Jul 19 18:28:51 user.info kernel: Based upon Swansea University Computer Society NET3.039
* Jul 19 18:28:51 user.warn kernel: Initializing RT netlink socket
* Jul 19 18:28:51 user.warn kernel: Starting kswapd
* Jul 19 18:28:51 user.info kernel: Journalled Block Device driver loaded
* Jul 19 18:28:51 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
* Jul 19 18:28:51 user.info kernel: devfs: boot_options: 0x1
* Jul 19 18:28:51 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
* Jul 19 18:28:51 user.info kernel: ACPI: Power Button (FF) [PWRF]
* Jul 19 18:28:51 user.info kernel: ACPI: Processor [CPU0] (supports C1, 8 throttling states)
* Jul 19 18:28:51 user.info kernel: ACPI: Processor [CPU1] (supports C1, 8 throttling states)
* Jul 19 18:28:51 user.warn kernel: pty: 256 Unix98 ptys configured
* Jul 19 18:28:51 user.info kernel: Real Time Clock Driver v1.10f
* Jul 19 18:28:51 user.info kernel: Floppy drive(s): fd0 is 1.44M
* Jul 19 18:28:51 user.info kernel: FDC 0 is a post-1991 82077
* Jul 19 18:28:51 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
* Jul 19 18:28:51 user.info kernel: loop: loaded (max 8 devices)
* Jul 19 18:28:51 user.info kernel: Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
* Jul 19 18:28:51 user.info kernel: tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1.
* Jul 19 18:28:51 user.info kernel: eth0: Lite-On 82c168 PNIC rev 32 at 0x9000, 00:A0:CC:54:04:38, IRQ 10.
* Jul 19 18:28:51 user.info kernel: Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
* Jul 19 18:28:51 user.info kernel: Copyright (c) 1999-2004 Intel Corporation.
* Jul 19 18:28:51 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
* Jul 19 18:28:51 user.warn kernel: FW Version=$Version$
* Jul 19 18:28:51 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
* Jul 19 18:28:51 user.info kernel: ThunderLAN driver v1.15
* Jul 19 18:28:51 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
* Jul 19 18:28:51 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
* Jul 19 18:28:51 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
* Jul 19 18:28:51 user.warn kernel: sk98lin: No adapter found.
* Jul 19 18:28:51 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
* Jul 19 18:28:51 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
* Jul 19 18:28:51 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Jul 19 18:28:51 user.info kernel: ATI-IXP300: IDE controller at PCI slot 00:14.1
* Jul 19 18:28:51 user.info kernel: ATI-IXP300: chipset revision 1
* Jul 19 18:28:51 user.info kernel: ATI-IXP300: not 100% native mode: will probe irqs later
* Jul 19 18:28:51 user.info kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
* Jul 19 18:28:51 user.info kernel: ATI-IXP300: simplex device: DMA disabled
* Jul 19 18:28:51 user.info kernel: ide1: ATI-IXP300 Bus-Master DMA disabled (BIOS)
* Jul 19 18:28:51 user.info kernel: CMD649: IDE controller at PCI slot 02:08.0
* Jul 19 18:28:51 user.info kernel: CMD649: chipset revision 2
* Jul 19 18:28:51 user.info kernel: CMD649: not 100% native mode: will probe irqs later
* Jul 19 18:28:51 user.info kernel: ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
* Jul 19 18:28:51 user.info kernel: ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
* Jul 19 18:28:51 user.warn kernel: hdb: SAMSUNG CD-ROM SC-152A, ATAPI CD/DVD-ROM drive
* Jul 19 18:28:51 user.warn kernel: hde: ST3120022A, ATA DISK drive
* Jul 19 18:28:51 user.warn kernel: hdf: ST3120022A, ATA DISK drive
* Jul 19 18:28:51 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Jul 19 18:28:51 user.warn kernel: hdg: ST3120022A, ATA DISK drive
* Jul 19 18:28:51 user.warn kernel: hdh: ST3120022A, ATA DISK drive
* Jul 19 18:28:51 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
* Jul 19 18:28:51 user.warn kernel: ide2 at 0x9400-0x9407,0x9802 on irq 11
* Jul 19 18:28:51 user.warn kernel: ide3 at 0x9c00-0x9c07,0xa002 on irq 11
* Jul 19 18:28:51 user.warn kernel: hde: attached ide-disk driver.
* Jul 19 18:28:51 user.warn kernel: hde: host protected area => 1
* Jul 19 18:28:51 user.info kernel: hde: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 18:28:51 user.warn kernel: hdf: attached ide-disk driver.
* Jul 19 18:28:51 user.warn kernel: hdf: host protected area => 1
* Jul 19 18:28:51 user.info kernel: hdf: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 18:28:51 user.warn kernel: hdg: attached ide-disk driver.
* Jul 19 18:28:51 user.warn kernel: hdg: host protected area => 1
* Jul 19 18:28:51 user.info kernel: hdg: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 18:28:51 user.warn kernel: hdh: attached ide-disk driver.
* Jul 19 18:28:51 user.warn kernel: hdh: host protected area => 1
* Jul 19 18:28:51 user.info kernel: hdh: setmax_ext LBA 234441648, native 234439535
* Jul 19 18:28:51 user.info kernel: hdh: 234439535 sectors (120033 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100)
* Jul 19 18:28:51 user.info kernel: Partition check:
* Jul 19 18:28:51 user.info kernel: /dev/ide/host2/bus0/target0/lun0: p1
* Jul 19 18:28:51 user.info kernel: /dev/ide/host2/bus0/target1/lun0: p1
* Jul 19 18:28:51 user.info kernel: /dev/ide/host2/bus1/target0/lun0: p1
* Jul 19 18:28:51 user.info kernel: /dev/ide/host2/bus1/target1/lun0: p1
* Jul 19 18:28:51 user.info kernel: SCSI subsystem driver Revision: 1.00
* Jul 19 18:28:51 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Apr 11 2007 22:41:48)
* Jul 19 18:28:51 user.warn kernel: scsi: Detection failed (no card)
* Jul 19 18:28:51 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
* Jul 19 18:28:51 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
* Jul 19 18:28:51 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
* Jul 19 18:28:51 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
* Jul 19 18:28:51 user.warn kernel: 3w-xxxx: No cards found.
* Jul 19 18:28:51 user.debug kernel: libata version 1.20 loaded.
* Jul 19 18:28:51 user.debug kernel: PCI(00:14.2): version 0.9
* Jul 19 18:28:51 user.info kernel: ata1: SATA max UDMA/100 cmd 0xF8809080 ctl 0xF880908A bmdma 0xF8809000 irq 11
* Jul 19 18:28:51 user.info kernel: ata2: SATA max UDMA/100 cmd 0xF88090C0 ctl 0xF88090CA bmdma 0xF8809008 irq 11
* Jul 19 18:28:51 user.debug kernel: ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
* Jul 19 18:28:51 user.info kernel: ata1: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
* Jul 19 18:28:51 user.info kernel: ata1(0): applying Seagate errata fix
* Jul 19 18:28:51 user.info kernel: ata1: dev 0 configured for UDMA/100
* Jul 19 18:28:51 user.debug kernel: ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
* Jul 19 18:28:51 user.info kernel: ata2: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
* Jul 19 18:28:51 user.info kernel: ata2(0): applying Seagate errata fix
* Jul 19 18:28:51 user.info kernel: ata2: dev 0 configured for UDMA/100
* Jul 19 18:28:51 user.info kernel: scsi1 : sata_sil
* Jul 19 18:28:51 user.info kernel: scsi2 : sata_sil
* Jul 19 18:28:51 user.warn kernel: Vendor: ATA Model: ST3120026AS Rev: 3.05
* Jul 19 18:28:51 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 05
* Jul 19 18:28:51 user.warn kernel: Vendor: ATA Model: ST3120026AS Rev: 3.05
* Jul 19 18:28:51 user.warn kernel: ANSI SCSI revision: 05
* Jul 19 18:28:51 user.warn kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
* Jul 19 18:28:51 user.warn kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
* Jul 19 18:28:51 user.warn kernel: SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
* Jul 19 18:28:51 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
* Jul 19 18:28:51 user.warn kernel: SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
* Jul 19 18:28:51 user.info kernel: /dev/scsi/host2/bus0/target0/lun0: p1
* Jul 19 18:28:51 user.info kernel: raw1394: /dev/raw1394 device initialized
* Jul 19 18:28:51 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
* Jul 19 18:28:51 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
* Jul 19 18:28:51 user.info kernel: usb.c: registered new driver usbdevfs
* Jul 19 18:28:51 user.info kernel: usb.c: registered new driver hub
* Jul 19 18:28:51 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
* Jul 19 18:28:51 user.info kernel: usb.c: registered new driver usbkbd
* Jul 19 18:28:51 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
* Jul 19 18:28:51 user.info kernel: Initializing USB Mass Storage driver.
* Jul 19 18:28:51 user.info kernel: usb.c: registered new driver usb-storage
* Jul 19 18:28:51 user.info kernel: USB Mass Storage support registered.
* Jul 19 18:28:51 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
* Jul 19 18:28:51 user.info kernel: IP Protocols: ICMP, UDP, TCP
* Jul 19 18:28:51 user.info kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
* Jul 19 18:28:51 user.info kernel: TCP: Hash tables configured (established 262144 bind 65536)
* Jul 19 18:28:51 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
* Jul 19 18:28:51 user.notice kernel: RAMDISK: NASLite file system found at block 0
* Jul 19 18:28:51 user.warn kernel: .<6>Freeing initrd memory: 1617k freed
* Jul 19 18:28:51 user.warn kernel: VFS: Mounted root (ext2 filesystem).
* Jul 19 18:28:51 user.info kernel: Mounted devfs on /dev
* Jul 19 18:28:51 user.info kernel: Freeing unused kernel memory: 536k freed
* Jul 19 18:28:51 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: spurious 8259A interrupt: IRQ7.
* Jul 19 18:28:51 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.info kernel: eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
* Jul 19 18:28:51 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.alert kernel: Unable to handle kernel paging request at virtual address fec00d24
* Jul 19 18:28:51 user.warn kernel: printing eip:
* Jul 19 18:28:51 user.warn kernel: c012b9c4
* Jul 19 18:28:51 user.alert kernel: *pde = 00000000
* Jul 19 18:28:51 user.warn kernel: Oops: 0002
* Jul 19 18:28:51 user.warn kernel: CPU: 0
* Jul 19 18:28:51 user.warn kernel: EIP: 0010:[] Not tainted
* Jul 19 18:28:51 user.warn kernel: EFLAGS: 00010282
* Jul 19 18:28:51 user.warn kernel: eax: 000000f0 ebx: cce00cc0 ecx: f7ff5dd4 edx: fec00d20
* Jul 19 18:28:51 user.warn kernel: esi: 00000800 edi: 00000400 ebp: 00000001 esp: f7f33e44
* Jul 19 18:28:51 user.warn kernel: ds: 0018 es: 0018 ss: 0018
* Jul 19 18:28:51 user.warn kernel: Process e2fsck (pid: 697, stackpage=f7f33000)
* Jul 19 18:28:51 user.warn kernel: Stack: c012ba76 00000001 c13ae70c 00002201 00498038 f7b1695c c012bc40 c13ae70c
* Jul 19 18:28:51 user.warn kernel: 00000400 00000001 f7ed62d4 c13ae70c c012c229 c13ae70c 00002201 00000400
* Jul 19 18:28:51 user.warn kernel: 00000010 00001000 00000004 00000400 00000282 00000001 f7ed6220 00000282
* Jul 19 18:28:51 user.emerg kernel: c012c229>] [] []
* Jul 19 18:28:51 user.warn kernel: [] [] [] [] [] []
* Jul 19 18:28:51 user.warn kernel: [] [] []
* Jul 19 18:28:51 user.warn kernel:
* Jul 19 18:28:51 user.warn kernel: Code: c7 42 04 ff ff ff ff c7 42 28 00 00 00 00 89 d0 c3 83 7c 24
* Jul 19 18:28:51 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
* Jul 19 18:28:51 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
* Jul 19 18:28:51 user.err kernel: ext3: No journal on filesystem on ide3(34,65)
* Jul 19 18:28:51 user.err kernel: ext3: No journal on filesystem on sd(8,1)
* Jul 19 18:28:51 user.err kernel: ext3: No journal on filesystem on sd(8,17)
Top
 Profile  
 
Tony
 Post subject:
PostPosted: Thu Jul 19, 2007 10:51 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
I think it's a RAM issue. Try different RAM and avoid using multiple sticks if not of the same type.
Top
 Profile  
 
Dismember
 Post subject:
PostPosted: Sun Jul 22, 2007 2:26 am 
Offline

Joined: Mon Jul 09, 2007 7:30 am
Posts: 14
I've just changed the stick to a 1GB stick of DDR 400.. its been crashing a lot over the weekend so i'll see what happens now :S
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group