I have been unable to install NASLite + or create floppies from the CD. When booting with the CD to make floppies, system boots fine but the screen ends up with black and white verticle zebra stripes, with a flashing cursor at the lower left of the screen between the stripes. Nothing else happens.
When tring to boot with NASLite + CD, boot process goes apparently normal until the menu screen, it is formated in colums but text is just so much noise.
My hard ware configuration is:
Model: CP810-M1
Manufacturer: Q-Lity
Type: Desktop
Role: Standalone Workstation
Asset Tag: TANGENT197
Service Tag:
Processor: Celeron 533MHz (L1 cache: 32.0 Kb, L2 cache: 128.0 Kb) Ext.clock: 66 MHz
Family: 6
Proc.model: 8
Stepping: 3
Brand ID: Pentium III
Serial number:
Bios: AMIBIOS 062702 07/15/95(C)1999 American Megatrends Inc., All Rights Reserved (17-Jul-2000)
Motherboard: CP810-M1 1.X (Q-Lity) (Socket 370)
Memory: 320 Mb (327 152 Kb) DIMM1: 256 Mb(DIMM,SDRAM) DIMM2: 128 Mb(DIMM,SDRAM)
Hard disks: 58.6 Gb (36.7 Gb free = 62.6%) (36.7 Gb free on C: drive)
primary disk: Maxtor 96147U8 size: 58.6 Gb sernum: N806S1YC
C:(Ntfs) 58.6 Gb (36.7 Gb free = 62.6%)
Video card: Intel(R) 82810E Graphics Controller (Microsoft Corporation) (32.0 Mb): 800 x 600 - 16777216 colors
Network cards: Realtek RTL8139 Family PCI Fast Ethernet NIC
Is this a software or hardware problem? How can I fix it?
Tim
|