NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Tue Aug 14, 2018 4:28 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 37 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Hardware configurations
PostPosted: Fri Jul 15, 2005 5:39 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:01 pm
Posts: 798
Location: ServerElements
Please post your working hardware configurations for all versions of NASLite v1.x

We will create a sticky post with all known working hardware in the future.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 09, 2006 11:30 am 
Offline

Joined: Thu Jan 05, 2006 2:45 pm
Posts: 37
Working with NASLite+ 1.5

AMD K6-200MMX
Generic i430TX based motherboard
32megs EDO SIMM RAM
Generic Realtek based 10/100 NIC
2x Seagate Barracuda 7200.9 160GB drives
1x Seagate Barracuda IV 60GB drive
Generic ATAPI CD-ROM

The ATA33 means she's not particularly fast, but achieves somewhere in the region of 5MB/s most of the time.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 09, 2006 12:11 pm 
Offline

Joined: Fri Apr 29, 2005 8:01 am
Posts: 170
Location: Staffordshire UK
AMD XP2400 processor
MSI KM4M-V motherboard
Samsung PC2100 256mb RAM
400GB 7200.7 Seagate HDD
300GB 7200.7 Seagate HDD
Ebuyer generic 64mb USB2.0 pen drive
Sony Floppy drive
Netgear GA311 gigabit network card
2 ebuyer HDD caddies


All working fine been up and running since vers 1.5 upgrade running disks at UDMA100 :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 09, 2006 12:48 pm 
Main Nas Server.
A7S8X-MX OnBoard Sound GFX and network card.
800 Duron Cpu
256 Generic Ram DDR
2x200 Maxtor HD's
2x80 Maxtor HD's
Crucial 256mb usb 2.0 Gizmo
Sony Floppy Drive

Scond test nas
KT7A Abit Motherboard V1.2 Raid (not enabled)
800 Duron Cpu
256MB Curcial Ram CL2
ATI Rage 128 Gfx Card
FA311 Netgear Card
2 x 80 Maxtor HD's
Sony 48 CDRW rom drive
Sony Floppy Drive

No problems whatso ever with these configs.


Top
  
 
 Post subject: My box
PostPosted: Sun Feb 19, 2006 12:44 pm 
Offline

Joined: Sun Feb 19, 2006 12:00 pm
Posts: 15
Location: London, Arkansas
Enlight 7250 Case w/ 420W PS
Intel D815BN Mainboard
Pentium III Processor @ 1000mhz
512mb PC133 Micron Memory
PNY TI-4200 2x/4x AGP card
Linksys 10/100 NIC v4.0
2- 80 GB ATA133 Maxtor HDD
LG 52x32x32 CDRW Drive
1.44mb FDD

This setup has no issues!

Running NASLite+ v1.5 for CD


Last edited by JSykes on Sun Feb 26, 2006 7:41 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Newest BOX
PostPosted: Fri Feb 24, 2006 11:07 pm 
Offline

Joined: Sun Feb 19, 2006 12:00 pm
Posts: 15
Location: London, Arkansas
MaxAttach 4100 with

SuperMicro 370SSR Motherboard
384 MB PC133 memory
Celeron 566 CPU
4-40gb Maxtor HDD's
512MB Lexar Jumpdrive
Slim FDD mounted in rear IO slot
200w Emacs PSU

Running NASLite+ USB v1.5
Using edeng's IOMEGA kicker

No problems so far!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 17, 2006 2:25 am 
Offline

Joined: Fri Mar 17, 2006 12:37 am
Posts: 31
ASUS P4S333 (flashed to 533)
P4-1.8GHz
256MB Generic DDR RAM
D-Link DGE-530T Gbit Adapter
PNY NVIDIA GF3 AGP
1x200 ATA133 Maxtor HD
1x120 ATA133 Maxtor HD
2x120 ATA100 WD HD's
Sandisk Cruzer 512MB Flash Drive
1.44MB FDD

Smoking fast writes (so-so reads)

Frame Resolution : 720 x 486
Bytes / Pixel : 2.00 (packed) (8 bit, 4:2:2 sampling)
Frame Size : 699,840 bytes
File Type : All frames in one container file (1,399,680,000 bytes).

Writing 2000 x 699840 byte frames into file x:\/framestream.dat
340 frames in 7.47 secs ==> 45.52 FPS (30.38 MB/s)
286 frames in 6.97 secs ==> 41.04 FPS (27.39 MB/s)
277 frames in 6.80 secs ==> 40.75 FPS (27.20 MB/s)
280 frames in 6.91 secs ==> 40.54 FPS (27.06 MB/s)
268 frames in 6.56 secs ==> 40.84 FPS (27.26 MB/s)
279 frames in 6.81 secs ==> 40.95 FPS (27.33 MB/s)
265 frames in 6.66 secs ==> 39.81 FPS (26.57 MB/s)
5 frames in 0.05 secs ==> 106.67 FPS (71.19 MB/s)

Write Summary : 2000.00 frames in 48.22 secs
: 39.81(min) 41.48(avg) 106.67(max) FPS
: 26.57(min) 27.68(avg) 71.19(max) MB/s

Reading 2000 x 699840 byte frames from file x:\/framestream.dat
101 frames in 5.00 secs ==> 20.20 FPS (13.48 MB/s)
105 frames in 5.02 secs ==> 20.93 FPS (13.97 MB/s)
102 frames in 5.02 secs ==> 20.34 FPS (13.57 MB/s)
102 frames in 5.02 secs ==> 20.34 FPS (13.57 MB/s)
99 frames in 5.00 secs ==> 19.80 FPS (13.21 MB/s)
70 frames in 5.03 secs ==> 13.91 FPS (9.29 MB/s)
102 frames in 5.00 secs ==> 20.40 FPS (13.62 MB/s)
108 frames in 5.08 secs ==> 21.27 FPS (14.19 MB/s)
105 frames in 5.00 secs ==> 21.00 FPS (14.02 MB/s)
118 frames in 5.02 secs ==> 23.53 FPS (15.70 MB/s)
158 frames in 5.00 secs ==> 31.60 FPS (21.09 MB/s)
153 frames in 5.00 secs ==> 30.60 FPS (20.42 MB/s)
152 frames in 5.00 secs ==> 30.40 FPS (20.29 MB/s)
154 frames in 5.00 secs ==> 30.80 FPS (20.56 MB/s)
167 frames in 5.02 secs ==> 33.30 FPS (22.22 MB/s)
160 frames in 5.03 secs ==> 31.80 FPS (21.22 MB/s)
44 frames in 1.27 secs ==> 34.77 FPS (23.20 MB/s)

Read Summary : 2000.00 frames in 81.48 secs
: 13.91(min) 24.54(avg) 34.77(max) FPS
: 9.29(min) 16.38(avg) 23.20(max) MB/s


Top
 Profile  
 
 Post subject:
PostPosted: Thu Apr 27, 2006 5:56 am 
Offline

Joined: Fri Aug 06, 2004 5:27 am
Posts: 48
Location: Franfurt am Main, Germany
zoner, how did you get the frame Resolution, Writing Speed and so on Infos?


my Systems

Terabyteserver:
Intel P2-500
256MB RAM
4x Maxtor 250GB HDDs
3C509 Ethernet Card
1.44 MB Disk

FTP_portable:
Intel-P3-400
128MB Ram
2x 10GB
1x 20GB
3C509 Ethernet Card
1.44 Disk

testing sys:
Intel-P3-400
128MB Ram
1x 40GB
3C509 Ethernet Card
1.44 Disk


Top
 Profile  
 
 Post subject: nas box hardware
PostPosted: Sat May 27, 2006 1:05 pm 
Offline

Joined: Sat May 27, 2006 12:33 pm
Posts: 1
Location: Weeping Water Ne
My new NAS server is as follows:

Compaq Deskpro EN D5S
866 Mhz processor
128M RAM
80G Samsung hard drive
NIC is onboard (I believe it is an Intel chipset)

I tested this on another Compaq PC and it worked as well. Here are the specs:

Compaq Deskpro
667 Mhz processor
192M RAM
10G Seagate harddrive
3COM NIC


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 02, 2006 8:04 am 
Offline

Joined: Mon Mar 20, 2006 7:44 am
Posts: 21
Location: Germany - Hannover (City of CeBit)
Both machines are running NASLite+ for USB Flash 1.5

NAS1:
ECS K7S5A Mainboard
AMD Duron 850 MHz
96 MB SDRAM
3Com 3C905B
Maxtor 96147U8 (60 GB)
Maxtor 32049H2 (20 GB)
IBM IC35L080AVVA07-0 (80 GB)
IBM-DTLA-307030 (30 GB)
CoolerMaster Stacker 4in3 HDD Cage with fan
150 W PSU

NAS2:
ECS K7S5A Pro Mainboard with Onboard LAN disabled
AMD Duron 800 MHz
96 MB SDRAM
3Com 3C905B
WDC WD200EB-00CPF0 (20 GB)
Maxtor 2F030L0 (30 GB)
SeaGate ST3300622A (300 GB)
SeaGate ST3300622A (300 GB)
CoolerMaster Stacker 4in3 HDD Cage with fan
150 W PSU


Last edited by kshicks on Sun Jun 18, 2006 1:56 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 2:42 am 
Offline

Joined: Sun Jun 18, 2006 2:34 am
Posts: 1
Naslite+

Intel Celeron 533 socket 370 in slotket converter to slot 1
Intel AL440LX Motherboard
512 MB Sdram PC100
230 W Delta micro atx PSU
Intel Pro 100+ Network Adapter

2x 80gb Western Digital 7200rpm 8mb cache
1x 20gb Western Digital 5400rpm 2mb cache
1x Sony 16x Slot load cdrom
Radeon 7200 DDR AGP 32MB

Only downside is the ata33 spec being forced upon the machine. Cant wait for v2 so i can use my maxtor ultra 100 card again! :D


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 4:52 am 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1680
Location: Up State NY in the USA!!!!
Old Dell GX110 that was thrown off of a balcony and then into a dumpster. Free is good.

Operating System

Linux 2.4.27.NASLite #23 Mon Mar 14 15:56:58 MST 2005 i686

Uptime

00:45:01 up 75 days, 1:37, load average: 0.00, 0.00, 0.00

Processor (CPU)

vendor_id : GenuineIntel
model name : Celeron (Mendocino)
cpu MHz : 396.713
cache size : 128 KB
bogomips : 791.34

Memory

total used free shared buffers
Mem: 125920 122188 3732 0 1412

Disks

Filesystem Size Used Available Use% Device
System 3.9M 3.6M 305.0k 92% RAM Disk
Storage Area 275.1G 136.2G 138.9G 50% NAS Disk-1
Storage Area 183.4G 8.7G 174.7G 5% NAS Disk-2

Network Interface

ns83820.c: 0x22c: 621a1385, subsystem: 1385:621a
enabling optical transceiver
ns83820 v0.20: DP83820 v1.3: 00:09:5b:22:fd:ae io=0xfdfff000 irq=9 f=sg
link now 1000F mbps, full duplex and up.
Link encap:Ethernet HWaddr 00:09:5B:22:FD:AE
inet addr:192.168.1.226 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:69719250 errors:0 dropped:0 overruns:0 frame:0
TX packets:43098660 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3760258577 (3.5 GiB) TX bytes:2203721844 (2.0 GiB)


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 18, 2006 9:57 am 
Offline

Joined: Fri Jun 16, 2006 5:09 am
Posts: 130
Gateway 2000 PentiumII 233MHz
RAM 128Mb
Netgear GA311 Gigabit card
ATA33 IDE Controllers

CD-ROM
2x80Gb Maxtor 9 ATA133
1x300Gb Western Digital WD300JB

Works well. Transfer rates around 7Mb/s on 100Mbit LAN.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 24, 2006 9:52 pm 
Offline

Joined: Sun Aug 07, 2005 7:50 am
Posts: 149
Just purchased this CPU/board from Newegg last week on sale for $79.00

BIOSTAR P4M80-M4-COMBO35 Intel Celeron D 315 Socket 478 VIA P4M800 Micro ATX Motherboard/CPU Set - Retail

Loaded NASLite 2.0 and it works great. Boots from USB as well so I finally ditched the floppy.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 03, 2006 6:32 am 
Offline

Joined: Fri Jun 16, 2006 5:09 am
Posts: 130
Updated to V2.01 USB
PentiumII 233MHz
RAM 128Mb
Netgear GA311 Gigabit card
2x80Gb Maxtor Drives on Onboard UDMA33 IDE Controller

Iomega USB kicker disk
Twinmos 256Mb USB stick
Adaptec AAR-2400A ATA RAID Controller
3x300Gb Western Digital WD300JB
1x300Gb Maxtor

in RAID 5 giving a total of 825Mb formated disk under NasliteV2

Works well. Transfer rates around 8Mb/s on 100Mbit LAN.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 37 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group