NASLite Network Attached Storage

Recently I picked up some old computers dumped on the sidewalk, next to the curb, ready to be thrown into a garbage truck. From the first three I took working old AMD motherboards, memory and hard drives. The last one was in working order, without a hard drive.

After cleaning the box - dust inside a computer is so darn dirty, I assembled my new test box.

Ugly Old Case (Curb Side Orphan)
GigaByte GA 7VT880 F7 Socket A Motherboard (CSO)
AMD Sempron 2500+ (CSO)
New low noise Nexus AXP-3200 CPU cooler (cheap eBay catch)
New low noise/low speed case fans (local shop, the biggest investment: 24 Euro/33 USD)
1 GB Dimm Memory 400Mhz/128bit, Dual Channel (CSO)
Quantum Fireball EX6.4A 6GB IDE (Boot Drive) (CSO)
3Ware 8006-2LP RAID Controller (cheap catch earlier)
Seagate Barracuda 7200.7 ST3120827AS 120GB 7200 RPM in RAID 0 (Two, from old workstations)
NVIDIA AGP Video (CSO)
SATA TSSTcorp CDDVD Writer (Desk Top Orphan)
I replaced the working PS with a newer Antec 430W TruePower Trio (DTO)

Added later: Intel Pro/1000 GT Network Interface Card (DTO) - switched off the on-board 100MBPS network interface in the BIOS.
Meaning that the hardware profile is changed, and therefore also a new UNLOCK code is needed.

Right now I am testing NASLite-M2, which eventually will be inside my brother's music box (he performs & composes).
If anyone feels like it, look at the System Message Log, in the next posting. There are some anomalies in the last section....

Thanks.

PieterB

System Message Log:

* Nov 10 22:31:10 [3] klogd started: BusyBox v1.12.1 (2009-11-19 21:21:30 UTC)
* Nov 10 22:31:10 [3] Linux version 2.6.30.3.CORE3 (root@DevBox) (gcc version 4.1.2 (SE 4.1.2 p1.0.2)) #1 Mon Jan 25 02:33:02 UTC 2010
* Nov 10 22:31:10 [2] KERNEL supported cpus:
* Nov 10 22:31:10 [2] Intel GenuineIntel
* Nov 10 22:31:10 [2] AMD AuthenticAMD
* Nov 10 22:31:10 [2] NSC Geode by NSC
* Nov 10 22:31:10 [2] Cyrix CyrixInstead
* Nov 10 22:31:10 [2] Centaur CentaurHauls
* Nov 10 22:31:10 [2] Transmeta GenuineTMx86
* Nov 10 22:31:10 [2] Transmeta TransmetaCPU
* Nov 10 22:31:10 [2] UMC UMC UMC UMC
* Nov 10 22:31:10 [2] BIOS-provided physical RAM map:
* Nov 10 22:31:10 [2] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
* Nov 10 22:31:10 [2] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
* Nov 10 22:31:10 [2] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
* Nov 10 22:31:10 [2] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
* Nov 10 22:31:10 [2] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
* Nov 10 22:31:10 [2] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
* Nov 10 22:31:10 [2] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
* Nov 10 22:31:10 [2] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
* Nov 10 22:31:10 [2] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
* Nov 10 22:31:10 [2] DMI 2.3 present.
* Nov 10 22:31:10 [2] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
* Nov 10 22:31:10 [2] init_memory_mapping: 0000000000000000-00000000377fe000
* Nov 10 22:31:10 [1] 0000000000 - 0000400000 page 4k
* Nov 10 22:31:10 [1] 0000400000 - 0037400000 page 2M
* Nov 10 22:31:10 [1] 0037400000 - 00377fe000 page 4k
* Nov 10 22:31:10 [1] kernel direct mapping tables up to 377fe000 @ 7000-c000
* Nov 10 22:31:10 [2] RAMDISK: 3f751000 - 3ffee2c7
* Nov 10 22:31:10 [2] Allocated new RAMDISK: 0039f000 - 00c3c2c7
* Nov 10 22:31:10 [2] Move RAMDISK from 000000003f751000 - 000000003ffee2c6 to 0039f000 - 00c3c2c6
* Nov 10 22:31:10 [4] ACPI: RSDP 000f6e10 00014 (v00 KT880 )
* Nov 10 22:31:10 [4] ACPI: RSDT 3fff3000 0002C (v01 KT880 AWRDACPI 42302E31 AWRD 01010101)
* Nov 10 22:31:10 [4] ACPI: FACP 3fff3040 00074 (v01 KT880 AWRDACPI 42302E31 AWRD 01010101)
* Nov 10 22:31:10 [4] ACPI: DSDT 3fff30c0 04928 (v01 KT880 AWRDACPI 00001000 MSFT 0100000C)
* Nov 10 22:31:10 [4] ACPI: FACS 3fff0000 00040
* Nov 10 22:31:10 [4] ACPI: APIC 3fff7a00 0005A (v01 KT880 AWRDACPI 42302E31 AWRD 01010101)
* Nov 10 22:31:10 [1] ACPI: Local APIC address 0xfee00000
* Nov 10 22:31:10 [3] 135MB HIGHMEM available.
* Nov 10 22:31:10 [3] 887MB LOWMEM available.
* Nov 10 22:31:10 [2] mapped low ram: 0 - 377fe000
* Nov 10 22:31:10 [2] low ram: 0 - 377fe000
* Nov 10 22:31:10 [2] node 0 low ram: 00000000 - 377fe000
* Nov 10 22:31:10 [2] node 0 bootmap 00008000 - 0000ef00
* Nov 10 22:31:10 [2] (7 early reservations) ==> bootmem [0000000000 - 00377fe000]
* Nov 10 22:31:10 [2] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
* Nov 10 22:31:10 [2] #1 [0000100000 - 000039b83c] TEXT DATA BSS ==> [0000100000 - 000039b83c]
* Nov 10 22:31:10 [2] #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
* Nov 10 22:31:10 [2] #3 [000039c000 - 000039e08e] BRK ==> [000039c000 - 000039e08e]
* Nov 10 22:31:10 [2] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
* Nov 10 22:31:10 [2] #5 [000039f000 - 0000c3c2c7] NEW RAMDISK ==> [000039f000 - 0000c3c2c7]
* Nov 10 22:31:10 [2] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
* Nov 10 22:31:10 [2] found SMP MP-table at [c00f5410] f5410
* Nov 10 22:31:10 [4] Zone PFN ranges:
* Nov 10 22:31:10 [4] DMA 0x00000000 -> 0x00001000
* Nov 10 22:31:10 [4] Normal 0x00001000 -> 0x000377fe
* Nov 10 22:31:10 [4] HighMem 0x000377fe -> 0x0003fff0
* Nov 10 22:31:10 [4] Movable zone start PFN for each node
* Nov 10 22:31:10 [4] early_node_map[2] active PFN ranges
* Nov 10 22:31:10 [4] 0: 0x00000000 -> 0x0000009f
* Nov 10 22:31:10 [4] 0: 0x00000100 -> 0x0003fff0
* Nov 10 22:31:10 [1] On node 0 totalpages: 262031
* Nov 10 22:31:10 [1] free_area_init_node: node 0, pgdat c031d560, node_mem_map c1000000
* Nov 10 22:31:10 [1] DMA zone: 32 pages used for memmap
* Nov 10 22:31:10 [1] DMA zone: 0 pages reserved
* Nov 10 22:31:10 [1] DMA zone: 3967 pages, LIFO batch:0
* Nov 10 22:31:10 [1] Normal zone: 1744 pages used for memmap
* Nov 10 22:31:10 [1] Normal zone: 221486 pages, LIFO batch:31
* Nov 10 22:31:10 [1] HighMem zone: 272 pages used for memmap
* Nov 10 22:31:10 [1] HighMem zone: 34530 pages, LIFO batch:7
* Nov 10 22:31:10 [2] Using APIC driver default
* Nov 10 22:31:10 [2] ACPI: PM-Timer IO Port: 0x4008
* Nov 10 22:31:10 [1] ACPI: Local APIC address 0xfee00000
* Nov 10 22:31:10 [2] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
* Nov 10 22:31:10 [2] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
* Nov 10 22:31:10 [2] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
* Nov 10 22:31:10 [2] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
* Nov 10 22:31:10 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
* Nov 10 22:31:10 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
* Nov 10 22:31:10 [1] ACPI: IRQ0 used by override.
* Nov 10 22:31:10 [1] ACPI: IRQ2 used by override.
* Nov 10 22:31:10 [1] ACPI: IRQ9 used by override.
* Nov 10 22:31:10 [2] Enabling APIC mode: Flat. Using 1 I/O APICs
* Nov 10 22:31:10 [2] Using ACPI (MADT) for SMP configuration information
* Nov 10 22:31:10 [1] nr_irqs_gsi: 24
* Nov 10 22:31:10 [2] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
* Nov 10 22:31:10 [4] Built 1 zone
* Nov 10 22:31:10 [2] lists in Zone order, mobility grouping on. Total pages: 259983
* Nov 10 22:31:10 [3] Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
* Nov 10 22:31:10 [2] Enabling fast FPU save and restore. done.
* Nov 10 22:31:10 [2] Enabling unmasked SIMD FPU exception support. done.
* Nov 10 22:31:10 [2] Initializing CPU#0
* Nov 10 22:31:10 [2] NR_IRQS:288
* Nov 10 22:31:10 [4] PID hash table entries: 4096 (order: 12, 16384 bytes)
* Nov 10 22:31:10 [4] Fast TSC calibration using PIT
* Nov 10 22:31:10 [4] Detected 1752.510 MHz processor.
* Nov 10 22:31:10 [4] Console: colour VGA+ 80x25
* Nov 10 22:31:10 [2] console [tty0] enabled
* Nov 10 22:31:10 [2] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
* Nov 10 22:31:10 [2] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
* Nov 10 22:31:10 [2] Initializing HighMem for node 0 (000377fe:0003fff0)
* Nov 10 22:31:10 [2] Memory: 1027236k/1048512k available (1523k kernel code, 20508k reserved, 667k data, 208k init, 139208k highmem)
* Nov 10 22:31:10 [2] virtual kernel memory layout:
* Nov 10 22:31:10 [2] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
* Nov 10 22:31:10 [2] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
* Nov 10 22:31:10 [2] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
* Nov 10 22:31:10 [2] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
* Nov 10 22:31:10 [2] .init : 0xc0326000 - 0xc035a000 ( 208 kB)
* Nov 10 22:31:10 [2] .data : 0xc027cfdb - 0xc0323e14 ( 667 kB)
* Nov 10 22:31:10 [2] .text : 0xc0100000 - 0xc027cfdb (1523 kB)
* Nov 10 22:31:10 [2] Checking if this processor honours the WP bit even in supervisor mode.Ok.
* Nov 10 22:31:10 [2] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
* Nov 10 22:31:10 [2] Calibrating delay loop (skipped), value calculated using timer frequency 3505.02 BogoMIPS (lpj=7010040)
* Nov 10 22:31:10 [4] Mount-cache hash table entries: 512
* Nov 10 22:31:10 [2] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
* Nov 10 22:31:10 [2] CPU: L2 Cache: 256K (64 bytes/line)
* Nov 10 22:31:10 [4] CPU: AMD Sempron(tm) 2500+ stepping 01
* Nov 10 22:31:10 [2] Checking 'hlt' instruction. OK.
* Nov 10 22:31:10 [2] ACPI: Core revision 20090320
* Nov 10 22:31:10 [2] net_namespace: 296 bytes
* Nov 10 22:31:10 [2] NET: Registered protocol family 16
* Nov 10 22:31:10 [2] ACPI: bus type pci registered
* Nov 10 22:31:10 [2] PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=1
* Nov 10 22:31:10 [2] PCI: Using configuration type 1 for base access
* Nov 10 22:31:10 [4] bio: create slab at 0
* Nov 10 22:31:10 [1] ACPI: EC: Look up EC in DSDT
* Nov 10 22:31:10 [2] ACPI: Interpreter enabled
* Nov 10 22:31:10 [2] ACPI: (supports S0 S5)
* Nov 10 22:31:10 [2] ACPI: Using IOAPIC for interrupt routing
* Nov 10 22:31:10 [2] ACPI: No dock devices found.
* Nov 10 22:31:10 [2] ACPI: PCI Root Bridge [PCI0] (0000:00)
* Nov 10 22:31:10 [1] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
* Nov 10 22:31:10 [1] pci 0000:00:01.0: supports D1
* Nov 10 22:31:10 [1] pci 0000:00:0a.0: reg 10 io port: [0xb000-0xb00f]
* Nov 10 22:31:10 [1] pci 0000:00:0a.0: reg 14 32bit mmio: [0xfb802000-0xfb80200f]
* Nov 10 22:31:10 [1] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfb000000-0xfb7fffff]
* Nov 10 22:31:10 [1] pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x00ffff]
* Nov 10 22:31:10 [1] pci 0000:00:0a.0: supports D1
* Nov 10 22:31:10 [1] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfb800000-0xfb801fff]
* Nov 10 22:31:10 [1] pci 0000:00:0b.0: supports D1 D2
* Nov 10 22:31:10 [2] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
* Nov 10 22:31:10 [2] pci 0000:00:0b.0: PME# disabled
* Nov 10 22:31:10 [1] pci 0000:00:0f.0: reg 10 io port: [0xb400-0xb407]
* Nov 10 22:31:10 [1] pci 0000:00:0f.0: reg 14 io port: [0xb800-0xb803]
* Nov 10 22:31:10 [1] pci 0000:00:0f.0: reg 18 io port: [0xbc00-0xbc07]
* Nov 10 22:31:10 [1] pci 0000:00:0f.0: reg 1c io port: [0xc000-0xc003]
* Nov 10 22:31:10 [1] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f]
* Nov 10 22:31:10 [1] pci 0000:00:0f.0: reg 24 io port: [0xc800-0xc8ff]
* Nov 10 22:31:10 [1] pci 0000:00:0f.1: reg 20 io port: [0xcc00-0xcc0f]
* Nov 10 22:31:10 [1] pci 0000:00:10.0: reg 20 io port: [0xd000-0xd01f]
* Nov 10 22:31:10 [1] pci 0000:00:10.0: supports D1 D2
* Nov 10 22:31:10 [2] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
* Nov 10 22:31:10 [2] pci 0000:00:10.0: PME# disabled
* Nov 10 22:31:10 [1] pci 0000:00:10.1: reg 20 io port: [0xd400-0xd41f]
* Nov 10 22:31:10 [1] pci 0000:00:10.1: supports D1 D2
* Nov 10 22:31:10 [2] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
* Nov 10 22:31:10 [2] pci 0000:00:10.1: PME# disabled
* Nov 10 22:31:10 [1] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f]
* Nov 10 22:31:10 [1] pci 0000:00:10.2: supports D1 D2
* Nov 10 22:31:10 [2] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
* Nov 10 22:31:10 [2] pci 0000:00:10.2: PME# disabled
* Nov 10 22:31:10 [1] pci 0000:00:10.3: reg 20 io port: [0xdc00-0xdc1f]
* Nov 10 22:31:10 [1] pci 0000:00:10.3: supports D1 D2
* Nov 10 22:31:10 [2] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
* Nov 10 22:31:10 [2] pci 0000:00:10.3: PME# disabled
* Nov 10 22:31:10 [1] pci 0000:00:10.4: reg 10 32bit mmio: [0xfb803000-0xfb8030ff]
* Nov 10 22:31:10 [1] pci 0000:00:10.4: supports D1 D2
* Nov 10 22:31:10 [2] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
* Nov 10 22:31:10 [2] pci 0000:00:10.4: PME# disabled
* Nov 10 22:31:10 [1] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff]
* Nov 10 22:31:10 [2]
* Nov 10 22:31:10 [2] 7>pci 0000:00:11.5: supports D1 D2
* Nov 10 22:31:10 [1] pci 0000:00:13.0: reg 10 io port: [0xe400-0xe4ff]
* Nov 10 22:31:10 [1] pci 0000:00:13.0: reg 14 32bit mmio: [0xfb804000-0xfb8040ff]
* Nov 10 22:31:10 [1] pci 0000:00:13.0: supports D1 D2
* Nov 10 22:31:10 [2] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
* Nov 10 22:31:10 [2] pci 0000:00:13.0: PME# disabled
* Nov 10 22:31:10 [1] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
* Nov 10 22:31:10 [1] pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff]
* Nov 10 22:31:10 [1] pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf900ffff]
* Nov 10 22:31:10 [1] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
* Nov 10 22:31:10 [1] pci 0000:01:00.0: supports D1 D2
* Nov 10 22:31:10 [1] pci 0000:01:00.1: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
* Nov 10 22:31:10 [1] pci 0000:01:00.1: reg 14 32bit mmio: [0xf9010000-0xf901ffff]
* Nov 10 22:31:10 [1] pci 0000:01:00.1: supports D1 D2
* Nov 10 22:31:10 [1] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
* Nov 10 22:31:10 [1] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
* Nov 10 22:31:10 [1] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xf7ffffff]
* Nov 10 22:31:10 [1] pci_bus 0000:00: on NUMA node 0
* Nov 10 22:31:10 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
* Nov 10 22:31:11 [2] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
* Nov 10 22:31:11 [2] PCI: Using ACPI for IRQ routing
* Nov 10 22:31:11 [1]
* Nov 10 22:31:11 [1] printing PIC contents
* Nov 10 22:31:11 [1] . PIC IMR: ffff
* Nov 10 22:31:11 [1] . PIC IRR: 0001
* Nov 10 22:31:11 [1] . PIC ISR: 0000
* Nov 10 22:31:11 [1] . PIC ELCR: 0e20
* Nov 10 22:31:11 [4]
* Nov 10 22:31:11 [1] printing local APIC contents on CPU#0/0:
* Nov 10 22:31:11 [2] . APIC ID: 00000000 (0)
* Nov 10 22:31:11 [2] . APIC VERSION: 00040010
* Nov 10 22:31:11 [1] . APIC TASKPRI: 00000000 (00)
* Nov 10 22:31:11 [1] . APIC ARBPRI: 00000000 (00)
* Nov 10 22:31:11 [1] . APIC PROCPRI: 00000000
* Nov 10 22:31:11 [1] . APIC LDR: 01000000
* Nov 10 22:31:11 [1] . APIC DFR: ffffffff
* Nov 10 22:31:11 [1] . APIC SPIV: 000001ff
* Nov 10 22:31:11 [1] . APIC ISR field:
* Nov 10 22:31:11 [1] 0123456789abcdef0123456789abcdef
* Nov 10 22:31:11 [1] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [1] . APIC TMR field:
* Nov 10 22:31:11 [1] 0123456789abcdef0123456789abcdef
* Nov 10 22:31:11 [1] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [1] . APIC IRR field:
* Nov 10 22:31:11 [1] 0123456789abcdef0123456789abcdef
* Nov 10 22:31:11 [1] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [4] 00000000000000000000000000000000
* Nov 10 22:31:11 [1] . APIC ESR: 00000000
* Nov 10 22:31:11 [1] . APIC ICR: 00000000
* Nov 10 22:31:11 [1] . APIC ICR2: 00000000
* Nov 10 22:31:11 [1] . APIC LVTT: 000200ef
* Nov 10 22:31:11 [1] . APIC LVTPC: 00010000
* Nov 10 22:31:11 [1] . APIC LVT0: 00010700
* Nov 10 22:31:11 [1] . APIC LVT1: 00000400
* Nov 10 22:31:11 [1] . APIC LVTERR: 000000fe
* Nov 10 22:31:11 [1] . APIC TMICT: 00014608
* Nov 10 22:31:11 [1] . APIC TMCCT: 00003ed7
* Nov 10 22:31:11 [1] . APIC TDCR: 00000003
* Nov 10 22:31:11 [4]
* Nov 10 22:31:11 [1] number of MP IRQ sources: 15.
* Nov 10 22:31:11 [1] number of IO-APIC #2 registers: 24.
* Nov 10 22:31:11 [2] testing the IO APIC.
* Nov 10 22:31:11 [4]
* Nov 10 22:31:11 [1] IO APIC #2
* Nov 10 22:31:11 [1] register #00: 02000000
* Nov 10 22:31:11 [1] . : physical APIC id: 02
* Nov 10 22:31:11 [1] . : Delivery Type: 0
* Nov 10 22:31:11 [1] . : LTS : 0
* Nov 10 22:31:11 [1] register #01: 00178003
* Nov 10 22:31:11 [1] . : max redirection entries: 0017
* Nov 10 22:31:11 [1] . : PRQ implemented: 1
* Nov 10 22:31:11 [1] . : IO APIC version: 0003
* Nov 10 22:31:11 [1] IRQ redirection table:
* Nov 10 22:31:11 [1] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
* Nov 10 22:31:11 [1] 00 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 01 001 0 0 0
* Nov 10 22:31:11 [2] 0 0 1 1 31
* Nov 10 22:31:11 [1] 02 001 0 0 0 0 0 1 1 30
* Nov 10 22:31:11 [1] 03 001 0 0 0 0 0 1 1 33
* Nov 10 22:31:11 [1] 04 001 0 0 0 0 0 1 1 34
* Nov 10 22:31:11 [1] 05 001 0 0 0 0 0 1 1 35
* Nov 10 22:31:11 [1] 06 001 0 0 0 0 0 1 1 36
* Nov 10 22:31:11 [1] 07 001 0 0 0 0 0 1 1 37
* Nov 10 22:31:11 [1] 08 001 0 0 0 0 0 1 1 38
* Nov 10 22:31:11 [1] 09 001 0 1 0 1 0 1 1 39
* Nov 10 22:31:11 [1] 0a 001 0 0 0 0 0 1 1 3A
* Nov 10 22:31:11 [1] 0b 001 0 0 0 0 0 1 1 3B
* Nov 10 22:31:11 [1] 0c 001 0 0 0 0 0 1 1 3C
* Nov 10 22:31:11 [1] 0d 001 0 0 0 0 0 1 1 3D
* Nov 10 22:31:11 [1] 0e 001 0 0 0 0 0 1 1 3E
* Nov 10 22:31:11 [1] 0f 001 0 0 0 0 0 1 1 3F
* Nov 10 22:31:11 [1] 10 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 11 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 12 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 13 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 14 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 15 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 16 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] 17 000 1 0 0 0 0 0 0 00
* Nov 10 22:31:11 [1] IRQ to pin mappings:
* Nov 10 22:31:11 [1] IRQ0 -> 0:2
* Nov 10 22:31:11 [1] IRQ1 -> 0:1
* Nov 10 22:31:11 [1] IRQ3 -> 0:3
* Nov 10 22:31:11 [1] IRQ4 -> 0:4
* Nov 10 22:31:11 [1] IRQ5 -> 0:5
* Nov 10 22:31:11 [1] IRQ6 -> 0:6
* Nov 10 22:31:11 [1] IRQ7 -> 0:7
* Nov 10 22:31:11 [1] IRQ8 -> 0:8
* Nov 10 22:31:11 [1] IRQ9 -> 0:9
* Nov 10 22:31:11 [1] IRQ10 -> 0:10
* Nov 10 22:31:11 [1] IRQ11 -> 0:11
* Nov 10 22:31:11 [1] IRQ12 -> 0:12
* Nov 10 22:31:11 [1] IRQ13 -> 0:13
* Nov 10 22:31:11 [1] IRQ14 -> 0:14
* Nov 10 22:31:11 [1] IRQ15 -> 0:15
* Nov 10 22:31:11 [2] done.
* Nov 10 22:31:11 [2] pnp: PnP ACPI init
* Nov 10 22:31:11 [2] ACPI: bus type pnp registered
* Nov 10 22:31:11 [2] pnp: PnP ACPI: found 13 devices
* Nov 10 22:31:11 [2] ACPI: ACPI bus type pnp unregistered
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xd0000-0xd7fff has been reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xd9000-0xdbfff has been reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0x0-0x9ffff could not be reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
* Nov 10 22:31:11 [2] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
* Nov 10 22:31:11 [2] system 00:02: ioport range 0x4000-0x407f has been reserved
* Nov 10 22:31:11 [2] system 00:02: ioport range 0x40f0-0x40ff has been reserved
* Nov 10 22:31:11 [2] system 00:02: ioport range 0x5000-0x500f has been reserved
* Nov 10 22:31:11 [2] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
* Nov 10 22:31:11 [2] system 00:03: ioport range 0x290-0x29f has been reserved
* Nov 10 22:31:11 [2] system 00:03: ioport range 0x800-0x805 has been reserved
* Nov 10 22:31:11 [2] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
* Nov 10 22:31:11 [2] pci 0000:00:01.0: IO window: 0xa000-0xafff
* Nov 10 22:31:11 [2] pci 0000:00:01.0: MEM window: 0xf8000000-0xf9ffffff
* Nov 10 22:31:11 [2] pci 0000:00:01.0: PREFETCH window: 0x000000e8000000-0x000000f7ffffff
* Nov 10 22:31:11 [1] pci 0000:00:01.0: setting latency timer to 64
* Nov 10 22:31:11 [1] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
* Nov 10 22:31:11 [1] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
* Nov 10 22:31:11 [1] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
* Nov 10 22:31:11 [1] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf9ffffff]
* Nov 10 22:31:11 [1] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xf7ffffff]
* Nov 10 22:31:11 [2] NET: Registered protocol family 2
* Nov 10 22:31:11 [2] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
* Nov 10 22:31:11 [2] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
* Nov 10 22:31:11 [2] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
* Nov 10 22:31:11 [2] TCP: Hash tables configured (established 131072 bind 65536)
* Nov 10 22:31:11 [2] TCP reno registered
* Nov 10 22:31:11 [2] NET: Registered protocol family 1
* Nov 10 22:31:11 [2] Trying to unpack rootfs image as initramfs.
* Nov 10 22:31:11 [2] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
* Nov 10 22:31:11 [2] Freeing initrd memory: 8820k freed
* Nov 10 22:31:11 [4] highmem bounce pool size: 64 pages
* Nov 10 22:31:11 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
* Nov 10 22:31:11 [2] msgmni has been set to 1752
* Nov 10 22:31:11 [2] io scheduler noop registered (default)
* Nov 10 22:31:11 [2] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
* Nov 10 22:31:11 [2] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
* Nov 10 22:31:11 [1] pci 0000:01:00.0: Boot video device
* Nov 10 22:31:11 [2] brd: module loaded
* Nov 10 22:31:11 [2] loop: module loaded
* Nov 10 22:31:11 [2] PNP: No PS/2 con
* Nov 10 22:31:11 [2] troller found. Probing ports directly.
* Nov 10 22:31:11 [2] serio: i8042 KBD port at 0x60,0x64 irq 1
* Nov 10 22:31:11 [2] serio: i8042 AUX port at 0x60,0x64 irq 12
* Nov 10 22:31:11 [2] mice: PS/2 mouse device common for all mice
* Nov 10 22:31:11 [2] cpuidle: using governor ladder
* Nov 10 22:31:11 [2] TCP cubic registered
* Nov 10 22:31:11 [2] RPC: Registered udp transport module.
* Nov 10 22:31:11 [2] RPC: Registered tcp transport module.
* Nov 10 22:31:11 [2] Using IPI Shortcut mode
* Nov 10 22:31:11 [3] RAMDISK: CORE3 root image found at block 0
* Nov 10 22:31:11 [4] EXT2-fs warning: checktime reached, running e2fsck is recommended
* Nov 10 22:31:11 [4] VFS: Mounted root (ext2 filesystem) on device 1:0.
* Nov 10 22:31:11 [2] Freeing unused kernel memory: 208k freed
* Nov 10 22:31:11 [2] Floppy drive(s): fd0 is 1.44M
* Nov 10 22:31:11 [2] FDC 0 is a post-1991 82077
* Nov 10 22:31:12 [2] rtc_cmos 00:05: RTC can wake from S4
* Nov 10 22:31:12 [2] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
* Nov 10 22:31:12 [2] rtc0: alarms up to one year, y3k, 242 bytes nvram
* Nov 10 22:31:13 [2] input: PC Speaker as /devices/platform/pcspkr/input/input0
* Nov 10 22:31:13 [2] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
* Nov 10 22:31:13 [2] ACPI: Power Button [PWRF]
* Nov 10 22:31:13 [2] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
* Nov 10 22:31:13 [2] ACPI: Power Button [PWRB]
* Nov 10 22:31:13 [2] processor ACPI_CPU:00: registered as cooling_device0
* Nov 10 22:31:13 [3] SCSI subsystem initialized
* Nov 10 22:31:13 [4] 3ware Storage Controller device driver for Linux v1.26.02.002.
* Nov 10 22:31:13 [2] 3w-xxxx 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
* Nov 10 22:31:20 [2] scsi0 : 3ware Storage Controller
* Nov 10 22:31:20 [4] 3w-xxxx: scsi0: Found a 3ware Storage Controller at 0xb000, IRQ: 18.
* Nov 10 22:31:20 [3] scsi 0:0:0:0: Direct-Access 3ware Logical Disk 0 1.2 PQ: 0 ANSI: 0
* Nov 10 22:31:20 [1] libata version 3.00 loaded.
* Nov 10 22:31:20 [1] sata_via 0000:00:0f.0: version 2.4
* Nov 10 22:31:20 [4] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
* Nov 10 22:31:20 [4] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
* Nov 10 22:31:20 [2] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
* Nov 10 22:31:20 [2] sata_via 0000:00:0f.0: routed to hard irq line 11
* Nov 10 22:31:20 [2] scsi1 : sata_via
* Nov 10 22:31:20 [2] scsi2 : sata_via
* Nov 10 22:31:20 [2] ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq 20
* Nov 10 22:31:20 [2] ata2: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq 20
* Nov 10 22:31:20 [2] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
* Nov 10 22:31:20 [2] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
* Nov 10 22:31:20 [2] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
* Nov 10 22:31:20 [2] ata2.00: configured for UDMA/100
* Nov 10 22:31:20 [3] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5
* Nov 10 22:31:20 [2] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
* Nov 10 22:31:20 [2] pata_acpi 0000:00:0f.1: PCI INT A disabled
* Nov 10 22:31:20 [2] Uniform Multi-Platform E-IDE driver
* Nov 10 22:31:20 [2] via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133
* Nov 10 22:31:20 [2] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06)
* Nov 10 22:31:20 [2] VIA_IDE 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
* Nov 10 22:31:20 [2] via82cxxx 0000:00:0f.1: IDE port disabled
* Nov 10 22:31:20 [2] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
* Nov 10 22:31:20 [2] ide0: BM-DMA at 0xcc00-0xcc07
* Nov 10 22:31:20 [1] Probing IDE interface ide0.
* Nov 10 22:31:21 [2] hda: QUANTUM FIREBALL EX6.4A, ATA DISK drive
* Nov 10 22:31:21 [1] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
* Nov 10 22:31:21 [2] hda: UDMA/33 mode selected
* Nov 10 22:31:21 [2] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
* Nov 10 22:31:21 [2] usbcore: registered new interface driver usbfs
* Nov 10 22:31:21 [2] usbcore: registered new interface driver hub
* Nov 10 22:31:21 [2] usbcore: registered new device driver usb
* Nov 10 22:31:21 [2] uhci_hcd: USB Universal Host Controller Interface driver
* Nov 10 22:31:21 [4] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
* Nov 10 22:31:21 [4] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.0: UHCI Host Controller
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000
* Nov 10 22:31:21 [2] usb usb1: configuration #1 chosen from 1 choice
* Nov 10 22:31:21 [2] hub 1-0:1.0: USB hub found
* Nov 10 22:31:21 [2] hub 1-0:1.0: 2 ports detected
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.1: UHCI Host Controller
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
* Nov 10 22:31:21 [2] usb usb2: configuration #1 chosen from 1 choice
* Nov 10 22:31:21 [2] hub 2-0:1.0: USB hub found
* Nov 10 22:31:21 [2] hub 2-0:1.0: 2 ports detected
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.2: UHCI Host Controller
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
* Nov 10 22:31:21 [2] usb usb3: configuration #1 chosen from 1 choice
* Nov 10 22:31:21 [2] hub 3-0:1.0: USB hub found
* Nov 10 22:31:21 [2] hub 3-0:1.0: 2 ports detected
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.3: UHCI Host Controller
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
* Nov 10 22:31:21 [2] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000dc00
* Nov 10 22:31:21 [2] usb usb4: configuration #1 chosen from 1 choice
* Nov 10 22:31:21 [2] hub 4-0:1.0: USB hub found
* Nov 10 22:31:21 [2] hub 4-0:1.0: 2 ports detected
* Nov 10 22:31:21 [2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
* Nov 10 22:31:21 [4] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
* Nov 10 22:31:21 [2] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
* Nov 10 22:31:21 [2] ehci_hcd 0000:00:10.4: EHCI Host Controller
* Nov 10 22:31:21 [2] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
* Nov 10 22:31:21 [2] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb803000
* Nov 10 22:31:21 [2] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
* Nov 10 22:31:21 [2] usb usb5: configuration #1 chosen from 1 choice
* Nov 10 22:31:21 [2] hub 5-0:1.0: USB hub found
* Nov 10 22:31:21 [2] hub 5-0:1.0: 8 ports detected
* Nov 10 22:31:21 [2] 8139too Fast Ethernet driver 0.9.28
* Nov 10 22:31:21 [2] 8139too 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
* Nov 10 22:31:21 [2] eth0: RealTek RTL8139 at 0xe400, 00:0f:ea:63:f7:f1, IRQ 18
* Nov 10 22:31:21 [1] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
* Nov 10 22:31:21 [2] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
* Nov 10 22:31:22 [2] usb 1-1: new low speed USB device using uhci_hcd and address 2
* Nov 10 22:31:22 [2] usb 1-1: configuration #1 chosen from 1 choice
* Nov 10 22:31:23 [4] Driver 'sd' needs updating - please use bus_type methods
* Nov 10 22:31:23 [3] sd 0:0:0:0: [sda] 468874752 512-byte hardware sectors: (240 GB/223 GiB)
* Nov 10 22:31:23 [3] sd 0:0:0:0: [sda] Write Protect is off
* Nov 10 22:31:23 [1] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
* Nov 10 22:31:23 [3] sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, supports DPO and FUA
* Nov 10 22:31:23 [2] sda:
* Nov 10 22:31:23 [2] sda1
* Nov 10 22:31:23 [3] sd 0:0:0:0: [sda] Attached SCSI disk
* Nov 10 22:31:23 [4] Driver 'sr' needs updating - please use bus_type methods
* Nov 10 22:31:23 [4] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
* Nov 10 22:31:23 [2] Uniform CD-ROM driver Revision: 3.20
* Nov 10 22:31:23 [1] sr 2:0:0:0: Attached scsi CD-ROM sr0
* Nov 10 22:31:23 [2] ide-gd driver 1.18
* Nov 10 22:31:23 [2] hda: max request size: 128KiB
* Nov 10 22:31:23 [2] hda: 12594960 sectors (6448 MB) w/418KiB Cache, CHS=13328/15/63
* Nov 10 22:31:23 [2] hda: cache flushes not supported
* Nov 10 22:31:23 [2] hda: hda1 hda2
* Nov 10 22:31:23 [2] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input3
* Nov 10 22:31:23 [2] generic-usb 0003:0603:00F2.0001: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:10.0-1/input0
* Nov 10 22:31:23 [2] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.1/input/input4
* Nov 10 22:31:23 [2] generic-usb 0003:0603:00F2.0002: input: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:10.0-1/input1
* Nov 10 22:31:23 [2] usbcore: registered new interface driver usbhid
* Nov 10 22:31:23 [2] usbhid: v2.6:USB HID core driver
* Nov 10 22:31:45 [5] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
* Nov 10 22:31:45 [5] hda: task_no_data_intr: error=0x04 { DriveStatusError }
* Nov 10 22:31:45 [5] hda: possibly failed opcode: 0xb0
* Nov 10 22:31:45 [5] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
* Nov 10 22:31:45 [5] hda: task_no_data_intr: error=0x04 { DriveStatusError }
* Nov 10 22:31:45 [5] hda: possibly failed opcode: 0xb0
* Nov 10 22:31:46 [2] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
* Nov 10 22:31:47 [5] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
* Nov 10 22:31:47 [5] hda: task_no_data_intr: error=0x04 { DriveStatusError }
* Nov 10 22:31:47 [5] hda: possibly failed opcode: 0xb0
* Nov 10 22:31:47 [2] kjournald starting. Commit interval 5 seconds
* Nov 10 22:31:47 [2] EXT3 FS on sda1, internal journal
* Nov 10 22:31:47 [2] EXT3-fs: mounted filesystem with writeback data mode.

System message priority, in ascending order, is as follows: [1] - DEBUG, [2] - INFO, [3] - NOTICE, [4] - WARNING, [5] - ERROR, [6] - CRITICAL, [7] - ALERT, [8] - EMERGENCY. The priority defines the severity of the message where CRITICAL, ALERT and EMERGENCY may warrant immediate attention.

Nice Orphan Use ! (Reduce, Reuse, Recycle !)

Since "hda" is the old Quantum, and ( I assume ) purely the boot drive with no data on it, I would not worry too much about the "anomalies". But you might consider replacing it with a cheap HDD or CF-card boot drive.

I always used a vertical Transcend IDE module, but this time I will 'sustainably' use this FIREBALL until the Great Extinguisher ends its life.

PieterB