Hi,
I have the following error in the disk 1 status and I can't find out what it means
As I have my back-ups on this drive, I'd like to be sure that I can count on it...
Any ideas and help will be appreciated.
TIA
Disk-1 Hardware Details:
MODEL: ST340014A, SN# 4JX11YLM, v.8.01
INTERFACE: IDE, HOST-2, BUS-0, TARGET-0, LUN-0
Filesystem Details:
tune2fs 1.27 (8-Mar-2002)
Filesystem volume name: NASLite-SE000121
Last mounted on:
Filesystem UUID: 30cf2c5b-7ec5-4430-b0d3-07c30cbf15e4
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal filetype needs_recovery sparse_super
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 4889248
Block count: 9767520
Reserved block count: 0
Free blocks: 2839560
Free inodes: 4877511
First block: 0
Block size: 4096
Fragment size: 4096
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16352
Inode blocks per group: 511
Last mount time: Sun Dec 2 09:06:51 2007
Last write time: Sun Dec 2 09:06:51 2007
Mount count: 4
Maximum mount count: 30
Last checked: Sat Dec 1 16:26:10 2007
Check interval: 15552000 (6 months)
Next check after: Thu May 29 16:26:10 2008
Reserved blocks uid: 0 (user admin)
Reserved blocks gid: 0 (group admin)
First inode: 11
Inode size: 128
Journal UUID:
Journal inode: 8
Journal device: 0x0000
First orphan inode: 0
S.M.A.R.T. Status:
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST340014A
Serial Number: 4JX11YLM
Firmware Version: 8.01
User Capacity: 40,019,582,464 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sun Dec 2 09:55:03 2007 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 40) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 31) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 071 063 006 Pre-fail Always - 162169313
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 18
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 237281475
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4863
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 663
194 Temperature_Celsius 0x0022 036 053 000 Old_age Always - 36
195 Hardware_ECC_Recovered 0x001a 071 063 000 Old_age Always - 162169313
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 194 000 Old_age Always - 34
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 60 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 60 occurred at disk power-on lifetime: 4685 hours (195 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 47 3c 5f e0 Error: UNC at LBA = 0x005f3c47 = 6241351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c9 03 08 47 3c 5f e0 00 00:00:35.732 READ DMA [OBS-5]
c9 03 01 00 00 00 e0 00 00:00:35.712 READ DMA [OBS-5]
c9 03 08 47 3c 5f e0 00 00:00:35.696 READ DMA [OBS-5]
c9 03 08 3f 3c 5f e0 00 00:00:35.685 READ DMA [OBS-5]
c9 03 08 3f 00 5e e0 00 00:00:35.684 READ DMA [OBS-5]
Error 59 occurred at disk power-on lifetime: 4685 hours (195 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 47 3c 5f e0 Error: UNC at LBA = 0x005f3c47 = 6241351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c9 03 08 47 3c 5f e0 00 00:00:35.732 READ DMA [OBS-5]
c9 03 08 3f 3c 5f e0 00 00:00:35.712 READ DMA [OBS-5]
c9 03 08 3f 00 5e e0 00 00:00:35.696 READ DMA [OBS-5]
c9 03 08 47 00 5e e0 00 00:00:35.685 READ DMA [OBS-5]
c9 03 08 37 00 5e e0 00 00:00:35.684 READ DMA [OBS-5]
Error 58 occurred at disk power-on lifetime: 4682 hours (195 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 78 a1 60 e0 Error: UNC at LBA = 0x0060a178 = 6332792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c9 03 08 77 a1 60 e0 00 00:00:54.053 READ DMA [OBS-5]
c9 03 08 6f a1 60 e0 00 00:00:54.029 READ DMA [OBS-5]
c9 03 01 00 00 00 e0 00 00:00:50.034 READ DMA [OBS-5]
c9 03 08 67 a1 60 e0 00 00:00:50.030 READ DMA [OBS-5]
c9 03 08 5f a1 60 e0 00 00:00:50.027 READ DMA [OBS-5]
Error 57 occurred at disk power-on lifetime: 4682 hours (195 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 55 7a a1 60 e0 Error: UNC at LBA = 0x0060a17a = 6332794
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c9 03 80 4f a1 60 e0 00 00:00:49.958 READ DMA [OBS-5]
c9 03 20 bf 8d 60 e0 00 00:00:49.952 READ DMA [OBS-5]
c9 03 38 4f 8b 60 e0 00 00:00:50.034 READ DMA [OBS-5]
c9 03 80 cf 8a 60 e0 00 00:00:50.030 READ DMA [OBS-5]
c9 03 80 4f 8a 60 e0 00 00:00:50.027 READ DMA [OBS-5]
Error 56 occurred at disk power-on lifetime: 4682 hours (195 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 78 a1 60 e0 Error: UNC at LBA = 0x0060a178 = 6332792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c9 03 08 77 a1 60 e0 00 00:00:35.611 READ DMA [OBS-5]
c9 03 01 00 00 00 e0 00 00:00:35.611 READ DMA [OBS-5]
c9 03 08 77 a1 60 e0 00 00:00:35.610 READ DMA [OBS-5]
c9 03 08 27 cf 1f e3 00 00:00:40.433 READ DMA [OBS-5]
c9 03 08 5f 89 60 e0 00 00:00:40.420 READ DMA [OBS-5]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 80% 4855 -
# 2 Extended offline Aborted by host 10% 4854 -
# 3 Extended offline Aborted by host 90% 4853 -
# 4 Extended offline Interrupted (host reset) 90% 4769 -
# 5 Extended offline Completed without error 00% 4759 -
# 6 Extended offline Completed: read failure 90% 4758 6332792
# 7 Extended offline Completed: read failure 90% 4758 6332792
# 8 Extended offline Completed without error 00% 4627 -
# 9 Short offline Completed without error 00% 4612 -
#10 Short offline Completed without error 00% 4610 -
#11 Short offline Completed without error 00% 4609 -
#12 Extended offline Completed without error 00% 4609 -
#13 Short offline Completed without error 00% 4609 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Login
Register
FAQ
Search
