Edeng: Here is the server initialization results. The drive type is included - any weakspots? I noticed a "read failure" at the end.
Thanks.
---
Disk-2 Hardware
WDC WD1600BB-00DWA0, ATA DISK drive
attached ide-disk driver.
host protected area => 1
312581808 sectors (160042 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
NOTE: Disk-2 is installed and available for use.
--------------------------------------------------------------------------------
Disk-2 S.M.A.R.T. Status
smartctl version 5.0-45 Copyright (C) 2002 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD1600BB-00DWA0
Serial Number: WD-WMAEK2313720
Firmware Version: 15.05R15
ATA Version is: 6
ATA Standard is: Unrecognized. Minor revision code: 0x00
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Off-line data collection status: (0x05) Offline data collection activity was
aborted by an interrupting command from host.
Self-test execution status: ( 246) Self-test routine in progress...
60% of test remaining.
Total time to complete off-line
data collection: (5061) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Automatic timer ON/OFF support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 67) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 174 051 Pre-fail - 0
3 Spin_Up_Time 0x0007 152 145 021 Pre-fail - 2941
4 Start_Stop_Count 0x0032 100 100 040 Old_age - 450
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail - 2
7 Seek_Error_Rate 0x000b 200 195 051 Pre-fail - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age - 1765
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age - 437
194 Temperature_Celsius 0x0022 102 253 000 Old_age - 48
196 Reallocated_Event_Count 0x0032 198 198 000 Old_age - 2
197 Current_Pending_Sector 0x0012 200 198 000 Old_age - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age - 5
200 Unknown_Attribute 0x0009 200 155 051 Pre-fail - 0
SMART Self-test log, version number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended off-line Completed: read failure 90% 197 0x00000003
# 2 Extended off-line Completed: read failure 90% 197 0x00000003