NASLite Network Attached Storage

this is the message i get when i use kicker disk


linld vo.97
kernel command line ;
root= /dev/ram0 rw
read error
highmem corrupted not exiting to dos


i need help
this is on a different mem stick than the last one
now im lost

bill

Sure its not a bad memory stick problem?

Doh!!...I see you tried a different memory stick....gotta remember to read the question...

still dont know what to do
anyone know what that means in my last post

bill

Hello Bill,

The problem does not appear to be the USB Flash. It’s more likely RAM related. It’s difficult to say, but I’d double-check and make sure your RAM is good and properly configured. Memtest x86 is a good free utility for that.

Also, I’d advise you to not start new posts about an unresolved subject. It's best to keep all pertinent posts under the original topic. People reading this post should also refer to the previous as follows: http://www.serverelements.com/phpBB2/viewtopic.php?t=608

newbie to this forum stuff

but will stay in this post
i can try to swap out memory and let you know
the machine is running 256 pc133