NASLite Network Attached Storage

I am getting an occassiona 2-3 times an hour disk warning. I| ckecked the disk1 info and cannot understand why...




Server System Disk-1 Disk-2 Disk-3 Disk-4 SYS Log SMB Log NMB Log About


Disk-1 Initialization Messages

Checking for Disk-1
Found Disk-1 partition
Verified Disk-1 filesystem
Attempting to mount Disk-1 filesystem
Disk-1 filesystem mounted successfully


--------------------------------------------------------------------------------
Disk-1 Hardware
SAMSUNG SP1203N, ATA DISK drive
attached ide-disk driver.
host protected area => 1
234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(33)
NOTE: Disk-1 is installed and available for use.



--------------------------------------------------------------------------------
Disk-1 S.M.A.R.T. Status
smartctl version 5.0-45 Copyright (C) 2002 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP1203N
Serial Number: S00QJ20X821460
Firmware Version: TL100-24
ATA Version is: 7
ATA Standard is: Unrecognized. Minor revision code: 0x1e
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Warning! SMART Attribute Data Structure error: invalid SMART checksum.
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Off-line data collection status: (0x00) Offline data collection activity was
never started.
Total time to complete off-line
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Off-line data collection not supported.
SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented.
Error logging capability: (0x00) Error logging NOT supported.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail - 0
3 Spin_Up_Time 0x0007 064 064 000 Pre-fail - 6144
4 Start_Stop_Count 0x0032 100 100 000 Old_age - 16
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age - 5495
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age - 12
194 Temperature_Celsius 0x0022 094 079 000 Old_age - 48
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age - 52863346
196 Reallocated_Event_Count 0x0012 253 253 000 Old_age - 0
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail - 0
198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail - 0
199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail - 0
200 Unknown_Attribute 0x000b 100 100 051 Pre-fail - 0
201 Unknown_Attribute 0x000b 100 100 051 Pre-fail - 0

Warning: device does not support Self Test Logging



--------------------------------------------------------------------------------

NASLite - © 2004 Tony Z. Tonchev (tzt@serverelements.com)
content updated every 5 minutes

Most likely reason is that the drive is failing SMART intermittently.