NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Thu Jun 20, 2019 7:09 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Help!!! Disk not mounted
PostPosted: Fri Aug 29, 2008 1:31 pm 
Offline

Joined: Thu Aug 30, 2007 11:07 pm
Posts: 20
Hello,

I rebooted my naslite USB version and one of the disks is not visible. I went into the admin console and i saw that the disk on question is not mounted. The only option available in the admin console is to format it and mount it. How can I get this disk online?

Thanks
kaiser


Top
 Profile  
 
PostPosted: Sun Aug 31, 2008 9:22 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
what version of the software are you using? A manual check and repair option is available.


Top
 Profile  
 
PostPosted: Sun Aug 31, 2008 1:12 pm 
Offline

Joined: Thu Aug 30, 2007 11:07 pm
Posts: 20
I'm using Naslite-2 USB 2.06 Now the disk in question does not even show up in the admin console. I have no way of accessing it, this happened when I rebooted again. Now that I think of it, it could be that I accidently deleted the thumm file on that drive, I don't know if that is critical for the drive to come online. Any help is much appreciated,


Top
 Profile  
 
PostPosted: Sun Aug 31, 2008 2:21 pm 
Offline

Joined: Fri Jan 12, 2007 4:27 am
Posts: 577
Location: Scotland
Change the data cable and check (or better swap) the power cable to the drive in question.


Top
 Profile  
 
PostPosted: Mon Sep 01, 2008 9:54 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Take a look at the syslog and see if the kernel is issuing any errors. The problem is hardware related and has nothing to do with you deleting a file. Even if the drive partition table is absolutely trashed, you should still see it in the admin interface with an option to format. That, considering drive is good and properly powered and connected.


Top
 Profile  
 
PostPosted: Mon Sep 01, 2008 1:34 pm 
Offline

Joined: Thu Aug 30, 2007 11:07 pm
Posts: 20
Here is the syslog

System Message Log:

Sep 1 11:43:50 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
Sep 1 11:43:50 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
Sep 1 11:43:50 user.info kernel: BIOS-provided physical RAM map:
Sep 1 11:43:50 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep 1 11:43:50 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep 1 11:43:50 user.warn kernel: BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
Sep 1 11:43:50 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep 1 11:43:50 user.warn kernel: BIOS-e820: 0000000000100000 - 0000000017800000 (usable)
Sep 1 11:43:50 user.warn kernel: BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Sep 1 11:43:50 user.notice kernel: 0MB HIGHMEM available.
Sep 1 11:43:50 user.notice kernel: 376MB LOWMEM available.
Sep 1 11:43:50 user.warn kernel: On node 0 totalpages: 96256
Sep 1 11:43:50 user.warn kernel: zone(0): 4096 pages.
Sep 1 11:43:50 user.warn kernel: zone(1): 92160 pages.
Sep 1 11:43:50 user.warn kernel: zone(2): 0 pages.
Sep 1 11:43:50 user.notice kernel: ACPI disabled because your bios is from 2000 and too old
Sep 1 11:43:50 user.notice kernel: You can enable it with acpi=force
Sep 1 11:43:50 user.warn kernel: Kernel command line: root=/dev/ram0 rw
Sep 1 11:43:50 user.info kernel: Initializing CPU#0
Sep 1 11:43:50 user.warn kernel: Detected 500.047 MHz processor.
Sep 1 11:43:50 user.warn kernel: Console: colour VGA+ 80x25
Sep 1 11:43:50 user.warn kernel: Calibrating delay loop. 996.14 BogoMIPS
Sep 1 11:43:50 user.info kernel: Memory: 374480k/385024k available (2214k kernel code, 10156k reserved, 642k data, 540k init, 0k highmem)
Sep 1 11:43:50 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Sep 1 11:43:50 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Sep 1 11:43:50 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Sep 1 11:43:50 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep 1 11:43:50 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep 1 11:43:50 user.info kernel: CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
Sep 1 11:43:50 user.debug kernel: CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
Sep 1 11:43:50 user.debug kernel: CPU: Common caps: 008021bf 808029bf 00000000 00000002
Sep 1 11:43:50 user.warn kernel: CPU: AMD-K6(tm) 3D processor stepping 0c
Sep 1 11:43:50 user.info kernel: Checking 'hlt' instruction. OK.
Sep 1 11:43:50 user.warn kernel: POSIX conformance testing by UNIFIX
Sep 1 11:43:50 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Sep 1 11:43:50 user.warn kernel: mtrr: detected mtrr type: AMD K6
Sep 1 11:43:50 user.info kernel: ACPI: Subsystem revision 20040326
Sep 1 11:43:50 user.info kernel: ACPI: Interpreter disabled.
Sep 1 11:43:50 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfa184, last bus=1
Sep 1 11:43:50 user.info kernel: PCI: Using configuration type 1
Sep 1 11:43:50 user.info kernel: PCI: Probing PCI hardware
Sep 1 11:43:50 user.warn kernel: PCI: Probing PCI hardware (bus 00)
Sep 1 11:43:50 user.info kernel: PCI: Via IRQ fixup
Sep 1 11:43:50 user.info kernel: PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Sep 1 11:43:50 user.info kernel: Linux NET4.0 for Linux 2.4
Sep 1 11:43:50 user.info kernel: Based upon Swansea University Computer Society NET3.039
Sep 1 11:43:50 user.warn kernel: Initializing RT netlink socket
Sep 1 11:43:50 user.warn kernel: Starting kswapd
Sep 1 11:43:50 user.info kernel: Journalled Block Device driver loaded
Sep 1 11:43:50 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Sep 1 11:43:50 user.info kernel: devfs: boot_options: 0x1
Sep 1 11:43:50 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sep 1 11:43:50 user.warn kernel: keyboard: Timeout - AT keyboard not present?(ed)
Sep 1 11:43:50 user.warn kernel: keyboard: Timeout - AT keyboard not present?(f4)
Sep 1 11:43:50 user.warn kernel: pty: 256 Unix98 ptys configured
Sep 1 11:43:50 user.info kernel: Real Time Clock Driver v1.10f
Sep 1 11:43:50 user.info kernel: Floppy drive(s): fd0 is 1.44M
Sep 1 11:43:50 user.info kernel: FDC 0 is a post-1991 82077
Sep 1 11:43:50 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Sep 1 11:43:50 user.info kernel: loop: loaded (max 8 devices)
Sep 1 11:43:50 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Sep 1 11:43:50 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
Sep 1 11:43:50 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Sep 1 11:43:50 user.warn kernel: FW Version=$Version$
Sep 1 11:43:50 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Sep 1 11:43:50 user.info kernel: ThunderLAN driver v1.15
Sep 1 11:43:50 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Sep 1 11:43:50 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Sep 1 11:43:50 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Sep 1 11:43:50 user.warn kernel: sk98lin: No adapter found.
Sep 1 11:43:50 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Sep 1 11:43:50 user.info kernel: 8139too Fast Ethernet driver 0.9.26
Sep 1 11:43:50 user.info kernel: PCI: Found IRQ 5 for device 00:09.0
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 5 with 00:08.1
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 5 with 00:0d.0
Sep 1 11:43:50 user.info kernel: eth0: RealTek RTL8139 at 0xd8000000, 00:04:e2:22:9c:d9, IRQ 5
Sep 1 11:43:50 user.debug kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Sep 1 11:43:50 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Sep 1 11:43:50 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 1 11:43:50 user.info kernel: VP_IDE: IDE controller at PCI slot 00:07.1
Sep 1 11:43:50 user.info kernel: VP_IDE: chipset revision 6
Sep 1 11:43:50 user.info kernel: VP_IDE: not 100% native mode: will probe irqs later
Sep 1 11:43:50 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 1 11:43:50 user.info kernel: VP_IDE: VIA vt82c686a (rev 14) IDE UDMA66 controller on pci00:07.1
Sep 1 11:43:50 user.info kernel: MA
Sep 1 11:43:50 user.info kernel: ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:pio, hdd:pio
Sep 1 11:43:50 user.info kernel: PDC20268: IDE controller at PCI slot 00:0a.0
Sep 1 11:43:50 user.info kernel: PCI: Found IRQ 10 for device 00:0a.0
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 10 with 00:08.2
Sep 1 11:43:50 user.info kernel: PDC20268: chipset revision 2
Sep 1 11:43:50 user.info kernel: PDC20268: not 100% native mode: will probe irqs later
Sep 1 11:43:50 user.info kernel: ide2: BM-DMA at 0x1850-0x1857, BIOS settings: hde:pio, hdf:pio
Sep 1 11:43:50 user.info kernel: ide3: BM-DMA at 0x1858-0x185f, BIOS settings: hdg:pio, hdh:pio
Sep 1 11:43:50 user.warn kernel: hda: ST3500830A, ATA DISK drive
Sep 1 11:43:50 user.warn kernel: hdb: HDT722516DLAT80, ATA DISK drive
Sep 1 11:43:50 user.warn kernel: hdg: ST3500630A, ATA DISK drive
Sep 1 11:43:50 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 1 11:43:50 user.warn kernel: ide3 at 0x1868-0x186f,0x1876 on irq 10
Sep 1 11:43:50 user.warn kernel: hda: attached ide-disk driver.
Sep 1 11:43:50 user.warn kernel: hda: host protected area => 1
Sep 1 11:43:50 user.info kernel: hda: 976773168 sectors (500108 MB) w/8192KiB Cache, CHS=60801/255/63, UDMA(33)
Sep 1 11:43:50 user.warn kernel: hdb: attached ide-disk driver.
Sep 1 11:43:50 user.warn kernel: hdb: host protected area => 1
Sep 1 11:43:50 user.info kernel: hdb: 321672960 sectors (164697 MB) w/7674KiB Cache, CHS=20023/255/63, UDMA(33)
Sep 1 11:43:50 user.warn kernel: hdg: attached ide-disk driver.
Sep 1 11:43:50 user.warn kernel: hdg: host protected area => 1
Sep 1 11:43:50 user.info kernel: hdg: 976773168 sectors (500108 MB) w/16384KiB Cache, CHS=60801/255/63, UDMA(100)
Sep 1 11:43:50 user.info kernel: Partition check:
Sep 1 11:43:50 user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1
Sep 1 11:43:50 user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
Sep 1 11:43:50 user.info kernel: /dev/ide/host2/bus1/target0/lun0: p1
Sep 1 11:43:50 user.info kernel: SCSI subsystem driver Revision: 1.00
Sep 1 11:43:50 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Sep 1 11:43:50 user.info kernel: Detecting Adaptec I2O RAID controllers.
Sep 1 11:43:50 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
Sep 1 11:43:50 user.warn kernel: scsi: Detection failed (no card)
Sep 1 11:43:50 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Sep 1 11:43:50 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Sep 1 11:43:50 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Sep 1 11:43:50 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Sep 1 11:43:50 user.warn kernel: 3w-xxxx: No cards found.
Sep 1 11:43:50 user.debug kernel: libata version 1.20 loaded.
Sep 1 11:43:50 user.info kernel: raw1394: /dev/raw1394 device initialized
Sep 1 11:43:50 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Sep 1 11:43:50 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Sep 1 11:43:50 user.info kernel: usb.c: registered new driver usbdevfs
Sep 1 11:43:50 user.info kernel: usb.c: registered new driver hub
Sep 1 11:43:50 user.info kernel: PCI: Found IRQ 10 for device 00:08.2
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 10 with 00:0a.0
Sep 1 11:43:50 user.info kernel: ehci_hcd 00:08.2: PCI device 1106:3104
Sep 1 11:43:50 user.info kernel: ehci_hcd 00:08.2: irq 10, pci mem d8004000
Sep 1 11:43:50 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Sep 1 11:43:50 user.info kernel: ehci_hcd 00:08.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Sep 1 11:43:50 user.info kernel: hub.c: USB hub found
Sep 1 11:43:50 user.info kernel: hub.c: 4 ports detected
Sep 1 11:43:50 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Sep 1 11:43:50 user.info kernel: PCI: Found IRQ 11 for device 00:07.2
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 11 with 00:07.3
Sep 1 11:43:50 user.info kernel: host/uhci.c: USB UHCI at I/O 0x1800, IRQ 11
Sep 1 11:43:50 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Sep 1 11:43:50 user.info kernel: hub.c: USB hub found
Sep 1 11:43:50 user.info kernel: hub.c: 2 ports detected
Sep 1 11:43:50 user.info kernel: PCI: Found IRQ 11 for device 00:07.3
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 11 with 00:07.2
Sep 1 11:43:50 user.info kernel: host/uhci.c: USB UHCI at I/O 0x1820, IRQ 11
Sep 1 11:43:50 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
Sep 1 11:43:50 user.info kernel: hub.c: USB hub found
Sep 1 11:43:50 user.info kernel: hub.c: 2 ports detected
Sep 1 11:43:50 user.info kernel: PCI: Found IRQ 3 for device 00:08.0
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 3 with 01:00.0
Sep 1 11:43:50 user.info kernel: host/uhci.c: USB UHCI at I/O 0x1880, IRQ 3
Sep 1 11:43:50 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
Sep 1 11:43:50 user.info kernel: hub.c: USB hub found
Sep 1 11:43:50 user.info kernel: hub.c: 2 ports detected
Sep 1 11:43:50 user.info kernel: PCI: Found IRQ 5 for device 00:08.1
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 5 with 00:09.0
Sep 1 11:43:50 user.info kernel: PCI: Sharing IRQ 5 with 00:0d.0
Sep 1 11:43:50 user.info kernel: host/uhci.c: USB UHCI at I/O 0x18a0, IRQ 5
Sep 1 11:43:50 user.info kernel: usb.c: new USB bus registered, assigned bus number 5
Sep 1 11:43:50 user.info kernel: hub.c: USB hub found
Sep 1 11:43:50 user.info kernel: hub.c: 2 ports detected
Sep 1 11:43:50 user.info kernel: usb.c: registered new driver usbkbd
Sep 1 11:43:50 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Sep 1 11:43:50 user.info kernel: Initializing USB Mass Storage driver.
Sep 1 11:43:50 user.info kernel: usb.c: registered new driver usb-storage
Sep 1 11:43:50 user.info kernel: USB Mass Storage support registered.
Sep 1 11:43:50 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Sep 1 11:43:50 user.info kernel: IP Protocols: ICMP, UDP, TCP
Sep 1 11:43:50 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Sep 1 11:43:50 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
Sep 1 11:43:50 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Sep 1 11:43:50 user.notice kernel: RAMDISK: NASLite file system found at block 0
Sep 1 11:43:50 user.warn kernel: .<6>hub.c: new USB device 00:07.2-1, assigned address 2
Sep 1 11:43:50 user.warn kernel: <6>scsi1 : SCSI emulation for USB Mass Storage devices
Sep 1 11:43:50 user.warn kernel: ndor: Model: USB DISK Rev: 1100
Sep 1 11:43:50 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Sep 1 11:43:50 user.warn kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Sep 1 11:43:50 user.warn kernel: SCSI device sda: 252928 512-byte hdwr sectors (129 MB)
Sep 1 11:43:50 user.warn kernel: sda: Write Protect is off
Sep 1 11:43:50 user.info kernel: /dev/scsi/host1/bus0/target0/lun0:. unknown partition table
Sep 1 11:43:50 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Sep 1 11:43:50 user.debug kernel: USB Mass Storage device found at 2
Sep 1 11:43:50 user.warn kernel: .<6>Freeing initrd memory: 1962k freed
Sep 1 11:43:50 user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
Sep 1 11:43:50 user.warn kernel: VFS: Mounted root (ext2 filesystem).
Sep 1 11:43:50 user.info kernel: Mounted devfs on /dev
Sep 1 11:43:50 user.info kernel: Freeing unused kernel memory: 540k freed
Sep 1 11:43:50 user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Sep 1 11:43:50 user.info kernel: kjournald starting. Commit interval 5 seconds
Sep 1 11:43:50 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Sep 1 11:43:50 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 1 11:43:50 user.info kernel: kjournald starting. Commit interval 5 seconds
Sep 1 11:43:50 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Sep 1 11:43:50 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 1 11:43:50 user.info kernel: kjournald starting. Commit interval 5 seconds
Sep 1 11:43:50 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,1), internal journal
Sep 1 11:43:50 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.


Top
 Profile  
 
PostPosted: Mon Sep 01, 2008 1:57 pm 
Offline

Joined: Fri Jan 12, 2007 4:27 am
Posts: 577
Location: Scotland
A quick inspection tells us that your board is sharing IRQ's 3,5,10 and 11. As Tony said, remove all plug-in cards and shut-down all onboard devices that you don't need (LPT, COM, 1394, etc) and try again....


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group