NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Mon Oct 14, 2019 10:37 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Thu Oct 29, 2015 8:16 am 
Offline

Joined: Tue Oct 27, 2009 10:16 am
Posts: 3
I have used NasLite for some time, my first server was set up in 2007 and have had total of 3 running since then. One in constant use but the others just at odd times for back-ups. I have had little or no issues when using the servers other than PSU failures. I have just updated my main unit because one of the drives stared to give issues.

I have replaced the motherboard (new board has 6 Sata ports), with new processer, 8 G of memory, two extra drives and updated to NasLit-2 x64 version.

Every thing seemed to work but I'm unable to write to most of the drives. They are all set to RW but when the system screen loads The line showing 'Mounting storage (Disk-0-1-2-3-4-5 )' has most disk numbers in yellow and only 1 in white. The one in white is the only disk I can write to.

The status screen (Status/htm/storage.htm) shows all drives as READ/WRITE.

Can anyone supply me some help with this issue.

I did send a request for help on the order page but have not had any feedback as yet.

Cheers Mel


Top
 Profile  
 
PostPosted: Fri Oct 30, 2015 1:13 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Hello Mel,

I'm assuming that the data on those drives is stuff written by NASlite, so the UID/GID are NAS-User. Check the disk contents using a browser via HTTP.

Anyway, the drives are mounted based on the partition label flags. Take a look at the status page for each drive and examine the label of each drive. They should be similar to this: NASLite-SE000160. If not, you'll have to use the Telnet Admin utility and set each drive to RW. The significant element is the 6-digit number following the -SE... as those are actually the behavior flags.

Lets start with that as there is little else I can think of. NASLite is pretty straightforward and robust in that respect. Make sure you save and reboot for changes to take effect if you reconfigure.

Hope that helps Mel.

Tony.


Top
 Profile  
 
PostPosted: Fri Oct 30, 2015 4:11 pm 
Offline

Joined: Tue Oct 27, 2009 10:16 am
Posts: 3
Tony, thanks for your reply.

I have tried setting all of the drives with the Telnet anmin util but still have the issue.

This is the information from the screens -

access user group date size name

drwxrwxrwx admin admin Oct 22 10:42 <DIR> Disk-0
drwxrwxrwx admin admin Sep 25 10:34 <DIR> Disk-1
drwxrwxrwx admin admin Aug 03 22:11 <DIR> Disk-2
drwxrwxrwx admin admin Oct 27 23:32 <DIR> Disk-3
drwxrwxrwx admin admin Oct 10 09:31 <DIR> Disk-4
drwxr-xr-x admin admin Oct 30 21:33 <DIR> Status

[ NasLite2B ] - Administration Utility - NASLite-2 x64 v2.68 11-2013


STORAGE CONFIGURATION MENU

* - Disk-0, DEVICE-SDA, HOST-0, BUS-0, TARGET-0, LUN-0
1 - Disk-1, DEVICE-SDB, HOST-2, BUS-0, TARGET-0, LUN-0
2 - Disk-2, DEVICE-SDC, HOST-3, BUS-0, TARGET-0, LUN-0
3 - Disk-3, DEVICE-SDD, HOST-5, BUS-0, TARGET-0, LUN-0
4 - Disk-4, DEVICE-SDE, HOST-5, BUS-0, TARGET-1, LUN-0

G - General Storage Option Menu

R - Return To Main Option Menu

I can't get to the cofig menu for disk-0 but I can access from windows machine to read files.

Disk-0 Hardware Details:

MODEL: ST1500DL003-9VT16L, SN# 5YD6YQQD, v.CC98
INTERFACE: DEVICE-SDA, HOST-0, BUS-0, TARGET-0, LUN-0

Filesystem Details:
tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121
Last mounted on: /media/ubuntu-mate/NASLite-SE000121

Disk-1 Hardware Details:

MODEL: ST32000542AS, SN# 6XW1QNMX, v.CC34
INTERFACE: DEVICE-SDB, HOST-2, BUS-0, TARGET-0, LUN-0

Filesystem Details:
tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121
Last mounted on: /media/ubuntu-mate/NASLite-SE0001211

DISK-1 CONFIGURATION MENU

Disk Model: ST32000542AS, SN# 6XW1QNMX, v.CC34
Interface: DEVICE-SDB, HOST-2, BUS-0, TARGET-0, LUN-0
Status: DISK IS MOUNTED!
Usage: 1.8T / 1.3T / 465.6G / 75% - ( Size / Used / Free / Used% )

1 - Export Disk-1 [ RW ] (RW, RO, --)
2 - Set Disk-1 Capacity Alarm [ 95 ] (75, 80, 85, 90, 95, 99, --)
3 - Set Disk-1 S.M.A.R.T. [ ON ] (ON, --)
4 - Run Disk-1 Extended S.M.A.R.T. Self-Test
5 - Check Disk-1 Filesystem
* - Check and Repair Disk-1 Filesystem
7 - Apply Journal to Disk-1 Filesystem
8 - Format Disk-1
9 - Mirror to Disk-1 from [ NONE ]

R - Return To Storage Configuration Menu


Disk-2 Hardware Details:

MODEL: SAMSUNG HD204UI, SN# S2H7J1AB103518, v.1AQ10001
INTERFACE: DEVICE-SDC, HOST-3, BUS-0, TARGET-0, LUN-0

Filesystem Details:
tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121

DISK-2 CONFIGURATION MENU

Disk Model: SAMSUNG HD204UI, SN# S2H7J1AB103518, v.1AQ10001
Interface: DEVICE-SDC, HOST-3, BUS-0, TARGET-0, LUN-0
Status: DISK IS MOUNTED!
Usage: 1.8T / 742.3G / 1.1T / 40% - ( Size / Used / Free / Used% )

1 - Export Disk-2 [ RW ] (RW, RO, --)
2 - Set Disk-2 Capacity Alarm [ 95 ] (75, 80, 85, 90, 95, 99, --)
3 - Set Disk-2 S.M.A.R.T. [ ON ] (ON, --)
4 - Run Disk-2 Extended S.M.A.R.T. Self-Test
5 - Check Disk-2 Filesystem
* - Check and Repair Disk-2 Filesystem
7 - Apply Journal to Disk-2 Filesystem
8 - Format Disk-2
9 - Mirror to Disk-2 from [ NONE ]

R - Return To Storage Configuration Menu

Disk-3 Hardware Details:

MODEL: WDC WD30EZRX-00D8PB0, SN# WD-WCC4N6JYR1A6, v.80.00A80
INTERFACE: DEVICE-SDD, HOST-5, BUS-0, TARGET-0, LUN-0

Filesystem Details:
tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121

DISK-3 CONFIGURATION MENU

Disk Model: WDC WD30EZRX-00D8PB0, SN# WD-WCC4N6JYR1A6, v.80.00A80
Interface: DEVICE-SDD, HOST-5, BUS-0, TARGET-0, LUN-0
Status: DISK IS MOUNTED!
Usage: 2.7T / 201.1M / 2.7T / 0% - ( Size / Used / Free / Used% )

1 - Export Disk-3 [ RW ] (RW, RO, --)
2 - Set Disk-3 Capacity Alarm [ 95 ] (75, 80, 85, 90, 95, 99, --)
3 - Set Disk-3 S.M.A.R.T. [ ON ] (ON, --)
4 - Run Disk-3 Extended S.M.A.R.T. Self-Test
5 - Check Disk-3 Filesystem
* - Check and Repair Disk-3 Filesystem
7 - Apply Journal to Disk-3 Filesystem
8 - Format Disk-3
9 - Mirror to Disk-3 from [ NONE ]

R - Return To Storage Configuration Menu

Disk-4 Hardware Details:

MODEL: WDC WD30EZRX-00D8PB0, SN# WD-WCC4NC389CT9, v.80.00A80
INTERFACE: DEVICE-SDE, HOST-5, BUS-0, TARGET-1, LUN-0

Filesystem Details:
tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121

DISK-4 CONFIGURATION MENU

Disk Model: WDC WD30EZRX-00D8PB0, SN# WD-WCC4NC389CT9, v.80.00A80
Interface: DEVICE-SDE, HOST-5, BUS-0, TARGET-1, LUN-0
Status: DISK IS MOUNTED!
Usage: 2.7T / 1.7T / 1023.3G / 63% - ( Size / Used / Free / Used% )

1 - Export Disk-4 [ RW ] (RW, RO, --)
2 - Set Disk-4 Capacity Alarm [ 95 ] (75, 80, 85, 90, 95, 99, --)
3 - Set Disk-4 S.M.A.R.T. [ ON ] (ON, --)
4 - Run Disk-4 Extended S.M.A.R.T. Self-Test
5 - Check Disk-4 Filesystem
* - Check and Repair Disk-4 Filesystem
7 - Apply Journal to Disk-4 Filesystem
8 - Format Disk-4
9 - Mirror to Disk-4 from [ NONE ]

R - Return To Storage Configuration Menu

GENERAL STORAGE OPTION MENU


1 - Export Disks Default [ RW ] (RW, RO, --)
2 - Set Default Capacity Alarm [ 95 ] (75, 80, 85, 90, 95, 99, --)
3 - Set Disks S.M.A.R.T. [ ON ] (ON, --)

4 - Set Remote Storage Hosts
5 - Clear Disk Mirror Status Details

R - Return To Storage Configuration Menu

I did have another drive fitted but have removed this in case it was causing an issue. I was the drive that booted the system on NasLite-2 v2.6? before I upgraded to NASLite-2 x64 V2.68.

I tried looking at the drives with a live Linux CD but the drives all just showed locks.

Every thing looks correct on the System screen, all lines in white with the end [DONE] 'In Green'.

The only thing I can see is the lines Mounting storage and Starting servers, ( Disk-0-1-2-3-4) numbers in yellow apart from the 3 which is white and the servers - (TELNET HTTP RSYNC FTP SMB/CIFS NFS AFP ) all in white apart from the RSYNC in yellow.

All of the data on the drives was from data stored on the older NasLite system before I upgraded.

Cheers Mel


Top
 Profile  
 
PostPosted: Mon Nov 02, 2015 12:40 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Hello Mel,

Looking at the data you posted, there are number of items I'm unsure about:
Quote:
Last mounted on: /media/ubuntu-mate/NASLite-SE0001211
followed by your comment:
Quote:
I tried looking at the drives with a live Linux CD but the drives all just showed locks
I'm interpreting that as you mounted the drives using Ubuntu live and they were still locked. If that's a correct interpretation, then the issue is not NASLite, but the filesystems.

Can you provide a dump of the http://YOUR.NAS.IP/Status/htm/storage-Disk-X.htm pages, specifically the Filesystem Details. NASLite will not export a filesystem as writable if damaging the filesystem is a possibility. NASlite assumes that it maintains the filesystem, so where it encounters unidentified markers or a filesystem version other than what it expects, it will stay clear of modifying it's contents. Were the filesystems modified in any way by Ubuntu as it uses ext4 by default. NASLite uses ext3.

Tony


Top
 Profile  
 
PostPosted: Tue Nov 03, 2015 2:59 pm 
Offline

Joined: Tue Oct 27, 2009 10:16 am
Posts: 3
Tony

When I booted the system from the live cd it was only to look at the drives and I did not attempt to write to any disk.

Here's the information you asked for -

DISK TOTAL USED FREE STATUS* S.M.A.R.T. USAGE
System 15.5M 4.9M 10.6M UNAVAILABLE UNAVAILABLE USED 32%
System Store 10.0M 6.9M 3.1M UNAVAILABLE UNAVAILABLE USED 69%
Disk-0 1.3T 335.9G 1.0T READ/WRITE TEMP 34°C USED 24%
Disk-1 916.9G 335.9G 581.0G READ/WRITE TEMP 37°C USED 37%
Disk-2 1.8T 195.5M 1.8T READ/WRITE TEMP 38°C USED 0% (95%)
Disk-3 1.8T 195.5M 1.8T READ/WRITE TEMP 34°C USED 0% (95%)
Disk-4 2.7T 1.9T 811.8G READ/WRITE TEMP 38°C USED 70% (95%)
Disk-5 2.7T 1.7T 1023.3G READ/WRITE TEMP 38°C USED 63% (95%)

Disk-0 Hardware Details:

MODEL: ST1500DL003-9VT16L, SN# 5YD6YQQD, v.CC98
INTERFACE: DEVICE-SDA, HOST-0, BUS-0, TARGET-0, LUN-0

Filesystem Details:

tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000101
Last mounted on:
Filesystem UUID: fa339c57-1143-4625-be25-a5619535a36e
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal resize_inode dir_index filetype needs_recovery sparse_super large_file
Filesystem flags: signed directory hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 183140352
Block count: 366273967
Reserved block count: 0
Free blocks: 272460032
Free inodes: 182218241
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 936
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Sat Oct 31 15:26:54 2015
Last mount time: Mon Nov 2 18:39:22 2015
Last write time: Mon Nov 2 18:39:22 2015
Mount count: 12
Maximum mount count: 39
Last checked: Sat Oct 31 15:26:54 2015
Check interval: 15552000 (6 months)
Next check after: Thu Apr 28 15:26:54 2016
Reserved blocks uid: 0 (user admin)
Reserved blocks gid: 0 (group admin)
First inode: 11
Inode size: 128
Journal inode: 8
Default directory hash: tea
Directory Hash Seed: 5e767979-8b19-41f8-9bec-248e1ebf8313
Journal backup: inode blocks

Disk-1 Hardware Details:

MODEL: Hitachi HDS721010CLA332, SN# JP9930HZ0M66SH, v.JP4OA3MA
INTERFACE: DEVICE-SDB, HOST-1, BUS-0, TARGET-0, LUN-0

Filesystem Details:

tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121
Last mounted on: /media/live/NASLite-SE0001212
Filesystem UUID: 71c86a31-98c3-462a-8f6c-be926a0ee72b
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal resize_inode dir_index filetype sparse_super large_file
Filesystem flags: signed directory hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 122093568
Block count: 244179967
Reserved block count: 0
Free blocks: 152300735
Free inodes: 121171473
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 965
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Thu Mar 10 19:30:55 2011
Last mount time: Mon Oct 26 22:08:03 2015
Last write time: Mon Nov 2 18:39:17 2015
Mount count: 21
Maximum mount count: 28
Last checked: Mon Oct 12 07:39:35 2015
Check interval: 15552000 (6 months)
Next check after: Sat Apr 9 07:39:35 2016
Reserved blocks uid: 0 (user admin)
Reserved blocks gid: 0 (group admin)
First inode: 11
Inode size: 128
Journal inode: 8
Default directory hash: tea
Directory Hash Seed: 8a772e24-12b8-4e78-997b-99a2801df7c8
Journal backup: inode blocks

Disk-2 Hardware Details:

MODEL: ST32000542AS, SN# 6XW1QNMX, v.CC34
INTERFACE: DEVICE-SDC, HOST-2, BUS-0, TARGET-0, LUN-0

Filesystem Details:

tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121
Last mounted on:
Filesystem UUID: ad82a442-9a32-4f29-9193-810a7b1c6291
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal resize_inode dir_index filetype needs_recovery sparse_super large_file
Filesystem flags: signed directory hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 244203520
Block count: 488378368
Reserved block count: 0
Free blocks: 480664915
Free inodes: 244203509
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 907
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Mon Nov 2 18:13:57 2015
Last mount time: Mon Nov 2 18:39:22 2015
Last write time: Mon Nov 2 18:39:22 2015
Mount count: 1
Maximum mount count: 22
Last checked: Mon Nov 2 18:13:57 2015
Check interval: 15552000 (6 months)
Next check after: Sat Apr 30 18:13:57 2016
Reserved blocks uid: 0 (user admin)
Reserved blocks gid: 0 (group admin)
First inode: 11
Inode size: 128
Journal inode: 8
Default directory hash: tea
Directory Hash Seed: abb1476c-eddb-4792-93ff-bc0e71b7354c
Journal backup: inode blocks

Disk-3 Hardware Details:

MODEL: SAMSUNG HD204UI, SN# S2H7J1AB103518, v.1AQ10001
INTERFACE: DEVICE-SDD, HOST-3, BUS-0, TARGET-0, LUN-0

Filesystem Details:

tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121
Last mounted on:
Filesystem UUID: c0c9d047-eb42-4e34-a547-da3455db06fc
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal resize_inode dir_index filetype needs_recovery sparse_super large_file
Filesystem flags: signed directory hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 244203520
Block count: 488378368
Reserved block count: 0
Free blocks: 480664915
Free inodes: 244203509
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 907
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Mon Nov 2 18:24:48 2015
Last mount time: Mon Nov 2 18:39:22 2015
Last write time: Mon Nov 2 18:39:22 2015
Mount count: 1
Maximum mount count: 31
Last checked: Mon Nov 2 18:24:48 2015
Check interval: 15552000 (6 months)
Next check after: Sat Apr 30 18:24:48 2016
Reserved blocks uid: 0 (user admin)
Reserved blocks gid: 0 (group admin)
First inode: 11
Inode size: 128
Journal inode: 8
Default directory hash: tea
Directory Hash Seed: 7ee594af-30a5-4e1b-8351-dd4b71e6f5f8
Journal backup: inode blocks

Disk-4 Hardware Details:

MODEL: WDC WD30EZRX-00D8PB0, SN# WD-WCC4N6JYR1A6, v.80.00A80
INTERFACE: DEVICE-SDE, HOST-5, BUS-0, TARGET-0, LUN-0

Filesystem Details:

tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121
Last mounted on:
Filesystem UUID: 3bf8b594-1a42-4e73-91fc-857f3bcbdc1f
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal resize_inode dir_index filetype needs_recovery sparse_super large_file
Filesystem flags: signed directory hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 366297088
Block count: 732566272
Reserved block count: 0
Free blocks: 205533591
Free inodes: 365729104
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 849
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Sun Oct 25 14:36:35 2015
Last mount time: Mon Nov 2 18:39:22 2015
Last write time: Mon Nov 2 18:39:22 2015
Mount count: 8
Maximum mount count: 31
Last checked: Sun Nov 1 10:01:41 2015
Check interval: 15552000 (6 months)
Next check after: Fri Apr 29 10:01:41 2016
Reserved blocks uid: 0 (user admin)
Reserved blocks gid: 0 (group admin)
First inode: 11
Inode size: 128
Journal inode: 8
Default directory hash: tea
Directory Hash Seed: e66158a6-2d65-4e89-9fa3-f0be77a63642
Journal backup: inode blocks

Disk-5 Hardware Details:

MODEL: WDC WD30EZRX-00D8PB0, SN# WD-WCC4NC389CT9, v.80.00A80
INTERFACE: DEVICE-SDF, HOST-5, BUS-0, TARGET-1, LUN-0

Filesystem Details:

tune2fs 1.40.4 (31-Dec-2007)
Filesystem volume name: NASLite-SE000121
Last mounted on: /media/ubuntu-mate/NASLite-SE0001212
Filesystem UUID: 05325597-2ea9-470a-8d22-cb0347afefb1
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal resize_inode dir_index filetype sparse_super large_file
Filesystem flags: signed directory hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 366297088
Block count: 732566637
Reserved block count: 0
Free blocks: 268258791
Free inodes: 366012285
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 849
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Fri Oct 31 15:16:43 2014
Last mount time: Fri Oct 30 16:26:07 2015
Last write time: Mon Nov 2 18:39:22 2015
Mount count: 2
Maximum mount count: 30
Last checked: Sun Oct 25 16:12:14 2015
Check interval: 15552000 (6 months)
Next check after: Fri Apr 22 16:12:14 2016
Reserved blocks uid: 0 (user admin)
Reserved blocks gid: 0 (group admin)
First inode: 11
Inode size: 128
Journal inode: 8
Default directory hash: tea
Directory Hash Seed: 5ff0ecd0-3735-45b3-b1a6-db0f0bbb0396
Journal backup: inode blocks

To try and the system working I have copied the data from disks 2 & 3 to disk 4. I could not unmount the drives using the telnet system. So I then used the install cd to format the two drives. I then removed the cd and started the server from disk-0 and then mounted disks 2 & 3. Saved the config and restarted but the system would not boot until I put the cd in the drive and it started off this. I can now write to disks 0, 2, 3 & 4 but not 2 or 5.

When in the telnet system the STORAGE CONFIGURATION MENU seems to over ride any changes made in the individual Disk config menus ?

0 - Disk-0, DEVICE-SDA, HOST-0, BUS-0, TARGET-0, LUN-0
1 - Disk-1, DEVICE-SDB, HOST-1, BUS-0, TARGET-0, LUN-0
2 - Disk-2, DEVICE-SDC, HOST-2, BUS-0, TARGET-0, LUN-0
3 - Disk-3, DEVICE-SDD, HOST-3, BUS-0, TARGET-0, LUN-0
4 - Disk-4, DEVICE-SDE, HOST-5, BUS-0, TARGET-0, LUN-0
5 - Disk-5, DEVICE-SDF, HOST-5, BUS-0, TARGET-1, LUN-0

G - General Storage Option Menu

R - Return To Main Option Menu


I never had any problems with NasLite-2 but can't seem to get a stable system with NasLite-2 x64.

I look forward to your next response.

Cheers Mel.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group