I have 2 NAS servers.. 192.168.1.20 and 192.168.1.21 Idea is 21 will be the backup server with read only export, and I will put it somewhere that it might likely survive in a fire..
Anyways.. i'm on .21 It only has one disk. Disk-0. I want to mirror .22's Disk-1 to it. I go to the mirror settings on Disk-0 of .21 and type in 192.168.1.20/Disk-1/8
NAS tell me that's good, do i want to apply the changes. I say yes. It returns me to the Disk-0 Menu but no mirror has been set.
What's wrong here?
Currently i'm heading to bed so i thought it couldn't hurt to run a full check file system on both drives. One is a .20 is 500G raid the other is a straight up 1TB (.22)
1TB (192.168.1.21/Disk-0) just finished: results are:
11 inodes used (0.00%) 1 non-contiguous inode (9.1%) # of inodes with ind/dind/tind blocks: 0/0/0 3882611 blocks used (1.59%) 0 bad blocks 1 large file
0 regular files 2 directories 0 character device files 0 block device files 0 fifos 0 links 0 symbolic links (0 fast symbolic links) 0 sockets -------- 2 files
So that's good. It's blank. Freshly formatted. I'll post the 500G raid tomorrow (192.168.1.20/Disk-1). Should it happen to find anything wrong how do i do a fix ? The scan and fix is greyed out. I suspect I need to unmount it (change the export as to --).
|