NASLite Network Attached Storage

could you help me to install naslite-2 with the .iso please

burn the iso file to a cd - imgburn will work or any other program for burning to a cd

boot from the newly burned cd and follow the prompts - to install the software to your chosen boot device - work through the format - mount etc - saving the config at each step - reboot as required adding serial number and unlock code again as required

thanks Tony very thank you but now I ve in my initialisation filesystem configuration complet and this : Unable to mount CD ROM was FAIL ?!!
how can i do for going it on done like the first, please help little frenchy

not really understanding you so guessing a little

once you have installed from the cd to the boot device you dont need the cd again - you should not be booting from it - remove the cd from the cd drive and boot from the hard drive or usb stick or whatever device you installed to

ok it's on place : it was an error of download the cd.
but now i can't saved my configuration on naslite 2 what doing ? i try with an second cd and it's the same when saving. Help please it's 2 days now to install it. i ve bought the license but i can't save it sorry....

now it's ok but now other problem to connect intern to wich adress ip i need ?

You need to select an IP address in the same range as that of your internet routers DHCP server. As an example mine is a 192.168.1.xxx address. I have the DHCP server set to give address in the 192.168.1.1xx range and use the address range of 192.168.1.2xx for my servers, printers, and managed or networked devices. You can find your machines IP info by typing ipconfig in the command window. Hope this makes sense to you with the language barrier we are dealing with.

Mike