Tony,
Thank you for your assistance.
I performed the sequence exactly as you stated, except before i selected 7 to reboot, i selected 9 to save the configuration (hope that did not screw anything up) then selected 7 to reboot.
Here is what happened.
Disk - 0
After the initial Boot the only option available when i selected Disk - 0 was number 4Run Disk 0 Extended SMART Self Test.
No options were selected for Export Disk
The Status of Disk - 0 was/is Not Mounted - Boot/Config Device
Disk - 1
When i selected Disk - 1 apart from option 9 all other options were available, and Export Disk -1 was set to RW.
I proceeded to select 8 Format Disk - 1
After this completed the Export Disk - 1 was still set to RW and the options were as before the Format function
Disk - 1 Status Not Mounted
I returned to the main menu Selected 9 to save the configuration, then 7 to Reboot
After Reboot the Disk - 0 and Disk - 1 status was as explained above
Hope this helps
John
|