thanks Doug - alter the ip on the first line to your naslite ip and also your name and password [if you have changed it] and run it with your Naslite box running - it should open the config screen - i just get an error
you can also try opening the info screens via a browser an click on the terminal icon - again that should open the terminal - mine does nothing
both worked/work on 32 bit systems
have been reading and come across something that says to replace the 64bit telnet program with one from a 32bit version of windows - not tried that yet
what version of windows 7 are you using - this is home premium - came with the laptop - cannot see it being that - but who knows?
Quote:
ServerName = "192.168.1.66"
Username = "admin" ' Current Username
Passwd = "nas" ' Current Password
XIT = "E" ' Used to "EXIT" from NAS. (upper-case E)
YES = "y" ' Used to confirm an option. (lower-case Y)
SHUT = "8" ' Used to SHUTDOWN NAS. (number eight)
DELAY = 250 ' Minimum 500ms recommended; 1000 works well.
' --------------------------------------------------------------------
' SECTION B: Start a Shell
' --------------------------------------------------------------------
Set WshShell = WScript.CreateObject("WScript.Shell")
' --------------------------------------------------------------------
' SECTION C: Start the TELNET
' --------------------------------------------------------------------
WshShell.Run "telnet " + ServerName
' --------------------------------------------------------------------
' SECTION D: Login. ("Sleep" pauses are needed delays.)
' --------------------------------------------------------------------
WScript.Sleep DELAY
WshShell.SendKeys Username + vbLf
WScript.Sleep DELAY
WshShell.SendKeys Passwd + vbLf
WScript.Quit