NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Thu Mar 28, 2024 1:56 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Network Unrechable
PostPosted: Thu Feb 03, 2011 3:42 pm 
Offline

Joined: Thu Feb 03, 2011 3:35 pm
Posts: 1
Hello
first, i'm sorry i'm french and my english is bad
I have install Naslite X64 on my computer and after installation i need verify my installation

I want ping Remote Computer but i have this message
Network Unrechable

I have change my RJ45, My motherboard, My Cdrom installation, My network Card
I have change ALLLLL
but this message is present
my configuration 172.16.0.200
mask 255.255.255.0
Gateway 172.16.0.100

I have try to selected First card Or Last but same error
and if i ping 172.16.0.200 (my adress) same error, same with configuration by default.
My network Card is detected by naslite ....
But before i have use Naslite 1 years and no problem with this config, but i have need to reinstall my config.



I need your help.
Sorry for my english :(


Top
 Profile  
 
 Post subject: Re: Network Unrechable
PostPosted: Fri Feb 04, 2011 8:49 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
First, take out the gateway address as I believe that it makes your NAS visible from the internet. Set it to 0.0.0.0

Second, Make sure that you have the address in the same address space as your other computers and the same netmask. IE: if your machines are 172.16.0.xxx and 255.255.255.0 then your NAS must also be in that same address space as well.

Third, access the machine via the web page and enter the unlock key.

As a side note be sure and turn off all devices on the board that are not needed like the printer and serial ports as well as sound etc.

Hope this translates OK for you.

Mike


Top
 Profile  
 
 Post subject: Re: Network Unrechable
PostPosted: Sat Feb 12, 2011 11:03 am 
Offline

Joined: Sat Mar 03, 2007 6:25 pm
Posts: 294
Location: Delft NL / Brooklyn NY
This is the rather accurate translation by Google:

Tout d'abord, prendre l'adresse de passerelle car je crois que cela rend votre NAS visible de l'internet. Réglez-le à 0.0.0.0

Ensuite, assurez-vous que vous avez l'adresse dans le même espace d'adressage que vos autres ordinateurs et le même masque. IE: si vos machines sont 172.16.0.xxx et 255.255.255.0 puis votre NAS doit également être dans ce même espace d'adressage ainsi.

Troisièmement, l'accès de la machine via la page web et entrez la clé de déblocage.

Comme note latérale être sûr et éteindre tous les appareils qui ne sont pas nécessaires, comme l'imprimante et des ports série ainsi que le son, etc

Espérons que cela se traduit par OK pour vous.

Mike


Hope this helps / J'espère ça aide

PieterB


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group