NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Thu Mar 28, 2024 6:12 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sun Nov 14, 2010 11:08 pm 
Offline

Joined: Tue Dec 02, 2008 9:49 pm
Posts: 2
I recently added a new hard drive to my system, and took the opportunity to upgrade to 2.63. The setup I have is one IDE drive, and 3 SATA drives. When I had this set up originally, I installed Naslite onto the IDE hard drive, and this drive showed up as Drive-0 in the exported drive list. Now, after installing 2.63, I don't have the option to export that drive, all I get are Drive-1 ,2, and 3. Drive-0 is not exportable? Is there a way to fix this? I don't want to waste the whole drive just to run Naslite. I tried booting from the CD, but it sees the hard drive as the configuration device, and won't use the floppy, so I still can't export it. Any ideas?


Top
 Profile  
 
PostPosted: Mon Nov 15, 2010 2:28 am 
Offline

Joined: Fri Dec 18, 2009 10:08 am
Posts: 129
Location: Sheffield UK
guyonearth wrote:
I recently added a new hard drive to my system, and took the opportunity to upgrade to 2.63. The setup I have is one IDE drive, and 3 SATA drives. When I had this set up originally, I installed Naslite onto the IDE hard drive, and this drive showed up as Drive-0 in the exported drive list. Now, after installing 2.63, I don't have the option to export that drive, all I get are Drive-1 ,2, and 3. Drive-0 is not exportable? Is there a way to fix this? I don't want to waste the whole drive just to run Naslite. I tried booting from the CD, but it sees the hard drive as the configuration device, and won't use the floppy, so I still can't export it. Any ideas?


I think you told it to install to the HD as standalone in the install utility and I think you should have used to option to use remaining space.
Think you will have to kill the config on that drive and re-install using the correct option for you (or install to a USB pen drive)

Try looking at the following thread (and the thread it refers to) and I believe it will help along the way

http://www.serverelements.com/forums/viewtopic.php?f=22&t=3294

Hope this helps just a little

Let us know how you get on

Doug


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group