NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Thu Mar 28, 2024 12:54 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: error message
PostPosted: Mon Mar 29, 2010 11:19 pm 
Offline

Joined: Tue Nov 13, 2007 4:37 pm
Posts: 160
Location: Leeds, West yorkshire, uk
I have an error message (which might be related to my slow conections) can anybody advise

ATA: Abnormal status 0x58 on port 0xf007
ata 1: command 0x38 timeout,stat0x58 host_stat0x61

the above message is reported several times down the screen

I have also noticed that if i goto services menu (option 3)

one of my disks is unavailable and reports as

* - Disk 3

how do i carryout drive tests ? if possable

steve


Top
 Profile  
 
 Post subject: Re: error message
PostPosted: Fri Apr 02, 2010 7:45 am 
Offline

Joined: Tue Nov 13, 2007 4:37 pm
Posts: 160
Location: Leeds, West yorkshire, uk
Confused now,

Removed what i thought was the drive placed it into a drive caddy and i can see and access all the files,

So i removed all my drives one by one and can see the contents of all of them,

Naslite dosn't still like disk-3 ? when they are replaced into my machine

Have even tried differnent sata ports on motherboard

steve


Top
 Profile  
 
 Post subject: Re: error message
PostPosted: Fri Apr 02, 2010 8:53 am 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
Replace the cable on the drive with a known good one and give that a try. Also, provide us with more info on your kit that you are running NL on.

Mike


Top
 Profile  
 
 Post subject: Re: error message
PostPosted: Sat Apr 03, 2010 2:08 am 
Offline

Joined: Tue Nov 13, 2007 4:37 pm
Posts: 160
Location: Leeds, West yorkshire, uk
system is a follows

Foxconn P96577AA-8EKRS2H Motherboard
Intel Celeron E3300 Processor
512Mb DDR2 Ram

2 x 1TB Western Digital Caviar Green 3.5" Hard Disk Drive - WD10EARS <<< This is one of the drives i am having trouble with
2 x 500GB Seagate Barracuda 7200.12 3.5" Hard Disk Drive - ST3500418AS
1 x 640GB Western Digital Caviar Blue 3.5" Hard Disk Drive - WD6400AAKS

Have replaced suspected sata cable - no joy

Steve


Top
 Profile  
 
 Post subject: Re: error message
PostPosted: Sat Apr 03, 2010 3:07 am 
Offline

Joined: Sun May 27, 2007 5:38 pm
Posts: 517
Location: gods own country
is the drive found in bios - if so try turning it off in bios - or if its turned off try turting it on - daft ideas but a daft problem

try swapping the 2 1TB drives - if it still will not find the drive on the same line then its a controller/cable problem?? - if it then will still not find the same physical drive then you would assume its a drive problem??

just stuff to try


Top
 Profile  
 
 Post subject: Re: error message
PostPosted: Sun Apr 04, 2010 9:28 am 
Offline

Joined: Tue Nov 13, 2007 4:37 pm
Posts: 160
Location: Leeds, West yorkshire, uk
Dunno what was wrong but i placed the two 1TB Drives into my caddy and run "Check and fix file system errors " in
partition magic on my xp machine - all seams to be working now :D

Thanks for everyones help

Steve


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group