NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Thu Mar 28, 2024 6:03 pm

All times are UTC - 5 hours [ DST ]




Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
Author Message
PostPosted: Sun Nov 01, 2009 9:22 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
General
Server Elements is proud to introduce NASLite-2 v2.6 Network Attached Storage Server Operation System. Based on Server Elements' new CORE3 technology, this latest release of NASLite-2, the fastest Network Attached Storage OS, is even faster. NASLite-2 v2.60 offers substantial improvements in performance, unprecedented hardware support and unmatched stability.

Hardware Support
Detailed list of supported hardware can be found here:

NOTE: The following reference provides a comprehensive list of device chipsets supported by NASLite-2 v2.6. This reference attempts to list all supported network and storage interface devices by type and manufacturer. It is also possible that NASLite-2 v2.6 will work well with other devices not explicitly identified by this reference.


Upgrading from Previous Versions
Upgrading to NASLite-2 v2.6 from earlier versions may require reconfiguration. Note that the contents of data drives will not be affected by the upgrade. The only exception to that rule is the storage partition of an HDD boot drive. Prior to upgrade make sure that you have the license and unlock IDs as well as any details such as IP, Netmask, etc. Those can be found by entering the administration menu of your current NASLite-2 server. Below are the general steps necessary for upgrade to v2.6:

  • Booting from CD-ROM (Formerly CDD)
    • Replace boot CD-ROM with NASLIte-2 v2.6 and reboot.
    • Allow default boot or select "l" for live.
    • Login as "admin" and make sure all configuration settings are correct.
    • Save settings and reboot.
    • Check server functionality to ensure normal operation.
  • Booting from USB Flash (Formerly USB)
    • Boot CD-ROM with NASLIte-2 v2.6 and type "i" to enter installer.
    • Select the appropriate USB boot device as the intended target.
    • Install NASLite-2 v2.6 on the USB device - upgrading while preserving the configuration is not possible.
    • Boot the server from the newly programmed USB boot device.
    • Login as "admin" and set all configuration settings as required.
    • Save settings and reboot.
    • Unlock, save settings and reboot.
    • Check server functionality to ensure normal operation.
  • Booting from Hard Drive (Formerly HDD)
    • Prepare boot drive by moving all data to a different drive or use a blank drive.
    • Boot CD-ROM with NASLIte-2 v2.6 and type "i" to enter installer.
    • Select the appropriate boot drive as the intended target.
    • Install NASLite-2 v2.6 on the boot drive - DISK WILL BE FORMATTED - upgrading while preserving the configuration is not possible.
    • Boot the server from the newly set boot drive.
    • Login as "admin" and set all configuration settings as required.
    • Save settings and reboot.
    • Unlock, save settings and reboot.
    • Check server functionality to ensure normal operation.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 52 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group