sorry for wasting ya'll time didnt mean to but was in a panic.
2nd day working with nas and a little furstated. but i got the old version 2.02 back working with the old config. lighting kill a feww servers and this one just reset its bios.
nas looks interesting and i will work with it more but all is good right now
thanks
mikeiver1 wrote:
You know that a little more info might give us a fighting chance getting you up and working.
You need to first boot, configure and then save the configuration. Then Reboot and finally enter the unlock key.
Then it should be visible.
If not then also try moving the controller in the PCI slot to another one.
In extreme cases NL will refuse to work with some hardware and nothing less than a change out will solve the problem.
PROVIDE MORE INFO ON WHAT YOU HAVE AS FAR AS HARDWARE AND WHAT YOU HAVE DONE SO FAR SO WE ARE NOT WASTING OUR TIME.
Mike