NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Thu Apr 18, 2024 9:09 pm

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 20 posts ]  Go to page 1, 2  Next
  Previous topic | Next topic 
Author Message
biker
 Post subject: FTP/NFS speed low.
PostPosted: Thu Jun 26, 2008 12:21 pm 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
I am only seeing around 6-9Mb on a Gigabit lan connection.
From the sys log:-
# Jun 26 15:45:09 user.info kernel: r8169 Gigabit Ethernet driver 1.2 loaded
# Jun 26 15:45:09 user.debug kernel: eth0: Identified chip type is 'RTL8169s/8110s'.
# Jun 26 15:45:09 user.info kernel: eth0: RTL8169 at 0xde807e00, 00:0f:b5:89:43:fa, IRQ 12
# Jun 26 15:45:09 user.info kernel: eth0: Auto-negotiation Enabled.
# Jun 26 15:45:09 user.info kernel: eth0: 1000Mbps Full-duplex operation.
# Jun 26 15:45:09 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

The Nic is a D-link GA-311, which is seen and is shown as 1Gb/full duplex but on the network status screen:-
Device Details:

Device Details:
Attachment:
Screenshot-NASLite-2 USB Network Status - Mozilla Firefox.png
Screenshot-NASLite-2 USB Network Status - Mozilla Firefox.png [ 134.6 KiB | Viewed 29128 times ]


It is all shown as unavailable ???!!???

I have just updated to latest 2.06 version to allow my usb kvm to work, but it was the same on 2.04 previously.

FTP tests.
Local lan, same switch, same file on different servers.

Naslite-2 server
ftp> mget *.iso
mget smoothwall-express-3.0-Backup-20080618-i386.iso? y
200 PORT command successful. Consider using PASV.
150 Opening BINARY mode data connection for smoothwall-express-3.0-Backup-20080618-i386.iso (124813312 bytes).
226 File send OK.
124813312 bytes received in 13.51 secs (9020.5 kB/s)

local server running Ubuntu 8.04
ftp> mget *.iso
mget smoothwall-express-3.0-Backup-20080618-i386.iso? y
200 PORT command successful.
150 Opening BINARY mode data connection for smoothwall-express-3.0-Backup-20080618-i386.iso (124813312 bytes).
226 Transfer complete.
124813312 bytes received in 4.46 secs (27339.7 kB/s)


so from my other desktop machine I can get 27Mb/s where as from the nas server I can only manage 9Mb/s??
The drives are set to DMA mode in the bios. Machine is a 1600 Duron with 512Mb.
There are only the 4 machines on the lan, these 3 and the firewall (smoothwall), all connected using cat 6 cable, no jumbo frames enabled.

How can I get the speed up on the Naslite server?
Top
 Profile  
 
dimension
 Post subject: Re: FTP/NFS speed low.
PostPosted: Thu Jun 26, 2008 3:23 pm 
Offline

Joined: Tue Aug 10, 2004 1:50 pm
Posts: 604
Location: Texas, USA
Do you get the same results if you do the test using x-over cable? Rtl cards have been a mixed bag for me and are far from the fastest out there. Try intel or 3com if you have one available.
Top
 Profile  
 
biker
 Post subject: Re: FTP/NFS speed low.
PostPosted: Thu Jun 26, 2008 4:19 pm 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
dimension wrote:
Do you get the same results if you do the test using x-over cable? Rtl cards have been a mixed bag for me and are far from the fastest out there. Try intel or 3com if you have one available.

I tried an intel 1000/mt but it wasn't recognised and that is all I have.
Top
 Profile  
 
mikeiver1
 Post subject: Re: FTP/NFS speed low.
PostPosted: Thu Jun 26, 2008 8:01 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
That Intel card should have worked like a charm. Try rebuilding the box again with the Intel NIC in it and see if it is seen.

Mike
Top
 Profile  
 
biker
 Post subject: Re: FTP/NFS speed low.
PostPosted: Fri Jun 27, 2008 4:36 am 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
mikeiver1 wrote:
That Intel card should have worked like a charm. Try rebuilding the box again with the Intel NIC in it and see if it is seen.

Mike

It only comes up with EEPROM data invalid when I put the Intel card in, however why should it need changed when the Ubuntu desktop is using an on board RTL nic with no issues and the speeds are correct ?
Top
 Profile  
 
biker
 Post subject: Re: FTP/NFS speed low.
PostPosted: Fri Jun 27, 2008 5:08 am 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
Ok put the intel card into another machine and tested using Xbuntu, got an ip fine.
Shutdown the nas box, installed the intel card. Now shows on the status screen:-
Attachment:
intel.png
intel.png [ 34.93 KiB | Viewed 29066 times ]


But the ftp is still slow:-
ftp> bin
200 Switching to Binary mode.
ftp> mget *.iso
mget smoothwall-express-3.0-Backup-20080618-i386.iso? y
200 PORT command successful. Consider using PASV.
150 Opening BINARY mode data connection for smoothwall-express-3.0-Backup-20080618-i386.iso (124813312 bytes).
226 File send OK.
124813312 bytes received in 15.85 secs (7691.1 kB/s)
ftp> quit
2nd try:-
250 Directory successfully changed.
ftp> bin
200 Switching to Binary mode.
ftp> mget *.iso
mget smoothwall-express-3.0-Backup-20080618-i386.iso? y
200 PORT command successful. Consider using PASV.
150 Opening BINARY mode data connection for smoothwall-express-3.0-Backup-20080618-i386.iso (124813312 bytes).
226 File send OK.
124813312 bytes received in 13.08 secs (9322.0 kB/s)
ftp>

So no real difference in the speed between the D-link and Intel cards. only diff. is that the status shows on the network screen now.

Any other ideas?
Top
 Profile  
 
mikeiver1
 Post subject: Re: FTP/NFS speed low.
PostPosted: Fri Jun 27, 2008 1:34 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS

We need to see the LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS LOGS

We will not be able to help if we can't get an idea of where the problem is coming from so post up your entire log file after a boot and transfer.

Mike
Top
 Profile  
 
biker
 Post subject: Re: FTP/NFS speed low.
PostPosted: Fri Jun 27, 2008 1:43 pm 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
Code:
    * Jun 27 09:03:13 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
    * Jun 27 09:03:13 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
    * Jun 27 09:03:13 user.info kernel: BIOS-provided physical RAM map:
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI data)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI NVS)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    * Jun 27 09:03:13 user.warn kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    * Jun 27 09:03:13 user.notice kernel: 0MB HIGHMEM available.
    * Jun 27 09:03:13 user.notice kernel: 479MB LOWMEM available.
    * Jun 27 09:03:13 user.warn kernel: On node 0 totalpages: 122864
    * Jun 27 09:03:13 user.warn kernel: zone(0): 4096 pages.
    * Jun 27 09:03:13 user.warn kernel: zone(1): 118768 pages.
    * Jun 27 09:03:13 user.warn kernel: zone(2): 0 pages.
    * Jun 27 09:03:13 user.info kernel: ACPI: RSDP (v000 AMI ) @ 0x000fa6f0
    * Jun 27 09:03:13 user.info kernel: ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1dff0000
    * Jun 27 09:03:13 user.info kernel: ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1dff0030
    * Jun 27 09:03:13 user.info kernel: ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1dff00c0
    * Jun 27 09:03:13 user.info kernel: ACPI: DSDT (v001 VIA KM266 0x00001000 MSFT 0x0100000d) @ 0x00000000
    * Jun 27 09:03:13 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
    * Jun 27 09:03:13 user.info kernel: Initializing CPU#0
    * Jun 27 09:03:13 user.warn kernel: Detected 1599.275 MHz processor.
    * Jun 27 09:03:13 user.warn kernel: Console: colour VGA+ 80x25
    * Jun 27 09:03:13 user.warn kernel: Calibrating delay loop. 3191.60 BogoMIPS
    * Jun 27 09:03:13 user.info kernel: Memory: 479664k/491456k available (2214k kernel code, 11404k reserved, 642k data, 540k init, 0k highmem)
    * Jun 27 09:03:13 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
    * Jun 27 09:03:13 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
    * Jun 27 09:03:13 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    * Jun 27 09:03:13 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
    * Jun 27 09:03:13 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
    * Jun 27 09:03:13 user.info kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    * Jun 27 09:03:13 user.info kernel: CPU: L2 Cache: 64K (64 bytes/line)
    * Jun 27 09:03:13 user.debug kernel: CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
    * Jun 27 09:03:13 user.debug kernel: CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
    * Jun 27 09:03:13 user.warn kernel: CPU: AMD Duron(tm) stepping 01
    * Jun 27 09:03:13 user.info kernel: Enabling fast FPU save and restore. done.
    * Jun 27 09:03:13 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
    * Jun 27 09:03:13 user.info kernel: Checking 'hlt' instruction. OK.
    * Jun 27 09:03:13 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
    * Jun 27 09:03:13 user.warn kernel: POSIX conformance testing by UNIFIX
    * Jun 27 09:03:13 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    * Jun 27 09:03:13 user.warn kernel: mtrr: detected mtrr type: Intel
    * Jun 27 09:03:13 user.info kernel: ACPI: Subsystem revision 20040326
    * Jun 27 09:03:13 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
    * Jun 27 09:03:13 user.info kernel: PCI: Using configuration type 1
    * Jun 27 09:03:13 user.info kernel: ACPI: Interpreter enabled
    * Jun 27 09:03:13 user.info kernel: ACPI: Using PIC for interrupt routing
    * Jun 27 09:03:13 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
    * Jun 27 09:03:13 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    * Jun 27 09:03:13 user.warn kernel: PCI: Probing PCI hardware (bus 00)
    * Jun 27 09:03:13 user.info kernel: PCI: Via IRQ fixup
    * Jun 27 09:03:13 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    * Jun 27 09:03:13 user.info kernel: ACPI: Power Resource [URP1] (off)
    * Jun 27 09:03:13 user.info kernel: ACPI: Power Resource [URP2] (off)
    * Jun 27 09:03:13 user.info kernel: ACPI: Power Resource [FDDP] (off)
    * Jun 27 09:03:13 user.info kernel: ACPI: Power Resource [LPTP] (off)
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    * Jun 27 09:03:13 user.info kernel: PCI: Probing PCI hardware
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    * Jun 27 09:03:13 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    * Jun 27 09:03:13 user.warn kernel: PCI: No IRQ known for interrupt pin A of device 00:11.1
    * Jun 27 09:03:13 user.info kernel: PCI: Using ACPI for IRQ routing
    * Jun 27 09:03:13 user.info kernel: Linux NET4.0 for Linux 2.4
    * Jun 27 09:03:13 user.info kernel: Based upon Swansea University Computer Society NET3.039
    * Jun 27 09:03:13 user.warn kernel: Initializing RT netlink socket
    * Jun 27 09:03:13 user.warn kernel: Starting kswapd
    * Jun 27 09:03:13 user.info kernel: Journalled Block Device driver loaded
    * Jun 27 09:03:13 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    * Jun 27 09:03:13 user.info kernel: devfs: boot_options: 0x1
    * Jun 27 09:03:13 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    * Jun 27 09:03:13 user.info kernel: ACPI: Power Button (FF) [PWRF]
    * Jun 27 09:03:13 user.info kernel: ton (CM) [SLPB]
    * Jun 27 09:03:13 user.info kernel: ACPI: Processor [CPU1] (supports C1)
    * Jun 27 09:03:13 user.warn kernel: pty: 256 Unix98 ptys configured
    * Jun 27 09:03:13 user.info kernel: Real Time Clock Driver v1.10f
    * Jun 27 09:03:13 user.warn kernel: keyboard: Timeout - AT keyboard not present?(ed)
    * Jun 27 09:03:13 user.warn kernel: keyboard: Timeout - AT keyboard not present?(f4)
    * Jun 27 09:03:13 user.warn kernel: floppy0: no floppy controllers found
    * Jun 27 09:03:13 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    * Jun 27 09:03:13 user.info kernel: loop: loaded (max 8 devices)
    * Jun 27 09:03:13 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
    * Jun 27 09:03:13 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
    * Jun 27 09:03:13 user.info kernel: e1000: 00:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:37:d3:92
    * Jun 27 09:03:13 user.info kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    * Jun 27 09:03:13 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
    * Jun 27 09:03:13 user.warn kernel: FW Version=$Version$
    * Jun 27 09:03:13 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
    * Jun 27 09:03:13 user.info kernel: ThunderLAN driver v1.15
    * Jun 27 09:03:13 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
    * Jun 27 09:03:13 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
    * Jun 27 09:03:13 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
    * Jun 27 09:03:13 user.warn kernel: sk98lin: No adapter found.
    * Jun 27 09:03:13 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
    * Jun 27 09:03:13 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    * Jun 27 09:03:13 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    * Jun 27 09:03:13 user.info kernel: SiI680: IDE controller at PCI slot 00:0a.0
    * Jun 27 09:03:13 user.info kernel: SiI680: chipset revision 2
    * Jun 27 09:03:13 user.info kernel: SiI680: not 100% native mode: will probe irqs later
    * Jun 27 09:03:13 user.info kernel: SiI680: BASE CLOCK == 133
    * Jun 27 09:03:13 user.info kernel: ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
    * Jun 27 09:03:13 user.info kernel: ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
    * Jun 27 09:03:13 user.info kernel: VP_IDE: IDE controller at PCI slot 00:11.1
    * Jun 27 09:03:13 user.warn kernel: PCI: No IRQ known for interrupt pin A of device 00:11.1
    * Jun 27 09:03:13 user.info kernel: VP_IDE: chipset revision 6
    * Jun 27 09:03:13 user.info kernel: VP_IDE: not 100% native mode: will probe irqs later
    * Jun 27 09:03:13 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    * Jun 27 09:03:13 user.info kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    * Jun 27 09:03:13 user.info kernel: ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:DMA, hdf:DMA
    * Jun 27 09:03:13 user.info kernel: ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:DMA, hdh:DMA
    * Jun 27 09:03:13 user.warn kernel: hda: ST340823A, ATA DISK drive
    * Jun 27 09:03:13 user.warn kernel: hde: HDS722525VLAT80, ATA DISK drive
    * Jun 27 09:03:13 user.warn kernel: hdf: Maxtor 7L300R0, ATA DISK drive
    * Jun 27 09:03:13 user.warn kernel: hdg: Maxtor 7L300R0, ATA DISK drive
    * Jun 27 09:03:13 user.warn kernel: hdh: ST3320620A, ATA DISK drive
    * Jun 27 09:03:13 user.warn kernel: ide0 at 0xde828f80-0xde828f87,0xde828f8a on irq 10
    * Jun 27 09:03:13 user.warn kernel: ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
    * Jun 27 09:03:13 user.warn kernel: ide3 at 0x170-0x177,0x376 on irq 15
    * Jun 27 09:03:13 user.warn kernel: hda: attached ide-disk driver.
    * Jun 27 09:03:13 user.warn kernel: hda: host protected area => 1
    * Jun 27 09:03:13 user.info kernel: hda: setmax LBA 78165361, native 78165360
    * Jun 27 09:03:13 user.info kernel: hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=77545/16/63, UDMA(100)
    * Jun 27 09:03:13 user.warn kernel: hde: attached ide-disk driver.
    * Jun 27 09:03:13 user.warn kernel: hde: host protected area => 1
    * Jun 27 09:03:13 user.info kernel: hde: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63, UDMA(100)
    * Jun 27 09:03:13 user.warn kernel: hdf: attached ide-disk driver.
    * Jun 27 09:03:13 user.warn kernel: hdf: host protected area => 1
    * Jun 27 09:03:13 user.info kernel: hdf: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
    * Jun 27 09:03:13 user.warn kernel: hdg: attached ide-disk driver.
    * Jun 27 09:03:13 user.warn kernel: hdg: host protected area => 1
    * Jun 27 09:03:13 user.info kernel: hdg: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
    * Jun 27 09:03:13 user.warn kernel: hdh: attached ide-disk driver.
    * Jun 27 09:03:13 user.warn kernel: hdh: host protected area => 1
    * Jun 27 09:03:13 user.info kernel: hdh: 625142448 sectors (320073 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(100)
    * Jun 27 09:03:13 user.info kernel: Partition check:
    * Jun 27 09:03:13 user.info kernel: /dev/ide/host0/bus0/target0/lun0: [PTBL] [5169/240/63] p1
    * Jun 27 09:03:13 user.info kernel: /dev/ide/host2/bus0/target0/lun0: p1
    * Jun 27 09:03:13 user.info kernel: /dev/ide/host2/bus0/target1/lun0: p1
    * Jun 27 09:03:13 user.info kernel: /dev/ide/host2/bus1/target0/lun0: p1
    * Jun 27 09:03:13 user.info kernel: /dev/ide/host2/bus1/target1/lun0: p1
    * Jun 27 09:03:13 user.info kernel: SCSI subsystem driver Revision: 1.00
    * Jun 27 09:03:13 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
    * Jun 27 09:03:13 user.info kernel: Detecting Adaptec I2O RAID controllers.
    * Jun 27 09:03:13 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
    * Jun 27 09:03:13 user.warn kernel: scsi: Detection failed (no card)
    * Jun 27 09:03:13 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
    * Jun 27 09:03:13 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
    * Jun 27 09:03:13 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
    * Jun 27 09:03:13 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
    * Jun 27 09:03:13 user.warn kernel: 3w-xxxx: No cards found.
    * Jun 27 09:03:13 user.debug kernel: libata version 1.20 loaded.
    * Jun 27 09:03:13 user.info kernel: raw1394: /dev/raw1394 device initialized
    * Jun 27 09:03:13 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
    * Jun 27 09:03:13 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
    * Jun 27 09:03:13 user.info kernel: usb.c: registered new driver usbdevfs
    * Jun 27 09:03:13 user.emerg kernel: 6>usb.c: registered new driver hub
    * Jun 27 09:03:13 user.info kernel: ehci_hcd 00:10.3: PCI device 1106:3104
    * Jun 27 09:03:13 user.info kernel: ehci_hcd 00:10.3: irq 5, pci mem de82ce00
    * Jun 27 09:03:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
    * Jun 27 09:03:13 user.info kernel: ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    * Jun 27 09:03:13 user.info kernel: hub.c: USB hub found
    * Jun 27 09:03:13 user.info kernel: hub.c: 6 ports detected
    * Jun 27 09:03:13 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
    * Jun 27 09:03:13 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd400, IRQ 10
    * Jun 27 09:03:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
    * Jun 27 09:03:13 user.info kernel: hub.c: USB hub found
    * Jun 27 09:03:13 user.info kernel: hub.c: 2 ports detected
    * Jun 27 09:03:13 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd000, IRQ 12
    * Jun 27 09:03:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
    * Jun 27 09:03:13 user.info kernel: hub.c: USB hub found
    * Jun 27 09:03:13 user.info kernel: hub.c: 2 ports detected
    * Jun 27 09:03:13 user.info kernel: host/uhci.c: USB UHCI at I/O 0xcc00, IRQ 11
    * Jun 27 09:03:13 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
    * Jun 27 09:03:13 user.info kernel: hub.c: USB hub found
    * Jun 27 09:03:13 user.info kernel: hub.c: 2 ports detected
    * Jun 27 09:03:13 user.info kernel: usb.c: registered new driver usbkbd
    * Jun 27 09:03:13 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
    * Jun 27 09:03:13 user.info kernel: Initializing USB Mass Storage driver.
    * Jun 27 09:03:13 user.info kernel: usb.c: registered new driver usb-storage
    * Jun 27 09:03:13 user.info kernel: USB Mass Storage support registered.
    * Jun 27 09:03:13 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
    * Jun 27 09:03:13 user.info kernel: IP Protocols: ICMP, UDP, TCP
    * Jun 27 09:03:13 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
    * Jun 27 09:03:13 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
    * Jun 27 09:03:13 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    * Jun 27 09:03:13 user.notice kernel: RAMDISK: NASLite file system found at block 0
    * Jun 27 09:03:13 user.warn kernel: <6>hub.c: new USB device 00:10.3-1, assigned address 2
    * Jun 27 09:03:13 user.warn kernel: <6>scsi1 : SCSI emulation for USB Mass Storage devices
    * Jun 27 09:03:13 user.warn kernel: . Vendor: WDC WD32 Model: 00AAJB-00TYA0 Rev: 00.0
    * Jun 27 09:03:13 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
    * Jun 27 09:03:13 user.warn kernel: .Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
    * Jun 27 09:03:13 user.warn kernel: .SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
    * Jun 27 09:03:13 user.info kernel: /dev/scsi/host1/bus0/target0/lun0:. p1
    * Jun 27 09:03:13 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
    * Jun 27 09:03:13 user.debug kernel: USB Mass Storage device found at 2
    * Jun 27 09:03:13 user.warn kernel: <6>hub.c: new USB device 00:10.3-2, assigned address 3
    * Jun 27 09:03:13 user.warn kernel: <6>scsi2 : SCSI emulation for USB Mass Storage devices
    * Jun 27 09:03:13 user.warn kernel: Vendor: ST350063 Model: 0AS Rev:
    * Jun 27 09:03:13 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
    * Jun 27 09:03:13 user.warn kernel: .Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
    * Jun 27 09:03:13 user.warn kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
    * Jun 27 09:03:13 user.info kernel: /dev/scsi/host2/bus0/target0/lun0:.<6>Freeing initrd memory: 1962k freed
    * Jun 27 09:03:13 user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
    * Jun 27 09:03:13 user.warn kernel: VFS: Mounted root (ext2 filesystem).
    * Jun 27 09:03:13 user.info kernel: Mounted devfs on /dev
    * Jun 27 09:03:13 user.info kernel: Freeing unused kernel memory: 540k freed
    * Jun 27 09:03:13 user.warn kernel: p1
    * Jun 27 09:03:13 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
    * Jun 27 09:03:13 user.debug kernel: USB Mass Storage device found at 3
    * Jun 27 09:03:13 user.info kernel: hub.c: new USB device 00:10.3-4, assigned address 4
    * Jun 27 09:03:13 user.info kernel: scsi3 : SCSI emulation for USB Mass Storage devices
    * Jun 27 09:03:13 user.warn kernel: Vendor: USB2.0 Model: USB Flash Disk Rev: 0.00
    * Jun 27 09:03:13 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
    * Jun 27 09:03:13 user.warn kernel: Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 0
    * Jun 27 09:03:13 user.warn kernel: SCSI device sdc: 128000 512-byte hdwr sectors (66 MB)
    * Jun 27 09:03:13 user.warn kernel: sdc: Write Protect is off
    * Jun 27 09:03:13 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: p1
    * Jun 27 09:03:13 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
    * Jun 27 09:03:13 user.debug kernel: USB Mass Storage device found at 4
    * Jun 27 09:03:13 user.info kernel: hub.c: new USB device 00:10.1-1, assigned address 2
    * Jun 27 09:03:13 user.info kernel: hub.c: USB hub found
    * Jun 27 09:03:13 user.info kernel: hub.c: 4 ports detected
    * Jun 27 09:03:13 user.info kernel: hub.c: new USB device 00:10.1-1.1, assigned address 3
    * Jun 27 09:03:13 user.info kernel: input0: Microsoft Natural Keyboard Pro on usb3:3.0
    * Jun 27 09:03:13 user.info kernel: 4, assigned address 4
    * Jun 27 09:03:13 user.warn kernel: usb.c: USB device 4 (vend/prod 0x5fe/0x11) is not claimed by any active driver.
    * Jun 27 09:03:13 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002
    * Jun 27 09:03:13 user.warn kernel: ^ISense class 7, sense error 0, extended sense 0
    * Jun 27 09:03:13 user.info kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
    * Jun 27 09:03:13 user.warn kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdf: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdg: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdg: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: hdh: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
    * Jun 27 09:03:13 user.warn kernel: hdh: drive_cmd: error=0x04 { DriveStatusError }
    * Jun 27 09:03:13 user.warn kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002
    * Jun 27 09:03:13 user.warn kernel: ^ISense class 7, sense error 0, extended sense 0
    * Jun 27 09:03:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 27 09:03:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
    * Jun 27 09:03:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 27 09:03:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 27 09:03:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,1), internal journal
    * Jun 27 09:03:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 27 09:03:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 27 09:03:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,65), internal journal
    * Jun 27 09:03:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 27 09:03:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 27 09:03:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,1), internal journal
    * Jun 27 09:03:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 27 09:03:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 27 09:03:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,65), internal journal
    * Jun 27 09:03:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 27 09:03:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 27 09:03:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
    * Jun 27 09:03:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 27 09:03:13 user.info kernel: kjournald starting. Commit interval 5 seconds
    * Jun 27 09:03:13 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,17), internal journal
    * Jun 27 09:03:13 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    * Jun 27 09:04:10 user.info kernel: usb.c: USB disconnect on device 00:10.1-1.4 address 4
    * Jun 27 14:46:57 user.warn kernel: spurious 8259A interrupt: IRQ7.

Here you go all the logs I can see.
The usb disconnect./connect is my kvm
I am connecting to disk-1 when doing the ftp
Top
 Profile  
 
biker
 Post subject: Re: FTP/NFS speed low.
PostPosted: Mon Jun 30, 2008 1:59 pm 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
Since no new replies, have tried moving the slot the nic is in, but no difference in the speed.
All the "extra's" in the bios are off (serial etc)

Anybody have any suggestions, or do I blow this away and install Ubuntu on it?
Top
 Profile  
 
mikeiver1
 Post subject: Re: FTP/NFS speed low.
PostPosted: Mon Jun 30, 2008 5:37 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
I see allot of drive seek errors in the log. I might look at the cables for starts. Also you may have a PS that is sagging and causing allot of problems. Then maybe a look at the controllers for the HDD and finally at the MB it's self. That would be my starting places.

Mike
Top
 Profile  
 
biker
 Post subject: Re: FTP/NFS speed low.
PostPosted: Tue Jul 01, 2008 7:38 am 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
ok replaced the cables, now no errors but still same speed.

log :-
* Jul 1 09:42:52 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
* Jul 1 09:42:52 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
* Jul 1 09:42:52 user.info kernel: BIOS-provided physical RAM map:
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 000000001f7f0000 - 000000001f7f8000 (ACPI data)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 000000001f7f8000 - 000000001f800000 (ACPI NVS)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
* Jul 1 09:42:52 user.warn kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
* Jul 1 09:42:52 user.notice kernel: 0MB HIGHMEM available.
* Jul 1 09:42:52 user.notice kernel: 503MB LOWMEM available.
* Jul 1 09:42:52 user.warn kernel: On node 0 totalpages: 129008
* Jul 1 09:42:52 user.warn kernel: zone(0): 4096 pages.
* Jul 1 09:42:52 user.warn kernel: zone(1): 124912 pages.
* Jul 1 09:42:52 user.warn kernel: zone(2): 0 pages.
* Jul 1 09:42:52 user.info kernel: ACPI: RSDP (v000 AMI ) @ 0x000fa6f0
* Jul 1 09:42:52 user.info kernel: ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1f7f0000
* Jul 1 09:42:52 user.info kernel: ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1f7f0030
* Jul 1 09:42:52 user.info kernel: ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1f7f00c0
* Jul 1 09:42:52 user.info kernel: ACPI: DSDT (v001 VIA KM266 0x00001000 MSFT 0x0100000d) @ 0x00000000
* Jul 1 09:42:52 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
* Jul 1 09:42:52 user.info kernel: Initializing CPU#0
* Jul 1 09:42:52 user.warn kernel: Detected 1599.240 MHz processor.
* Jul 1 09:42:52 user.warn kernel: Console: colour VGA+ 80x25
* Jul 1 09:42:52 user.warn kernel: Calibrating delay loop. 3191.60 BogoMIPS
* Jul 1 09:42:52 user.info kernel: Memory: 503952k/516032k available (2214k kernel code, 11692k reserved, 642k data, 540k init, 0k highmem)
* Jul 1 09:42:52 user.info kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
* Jul 1 09:42:52 user.info kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
* Jul 1 09:42:52 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
* Jul 1 09:42:52 user.info kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
* Jul 1 09:42:52 user.warn kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
* Jul 1 09:42:52 user.info kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
* Jul 1 09:42:52 user.info kernel: CPU: L2 Cache: 64K (64 bytes/line)
* Jul 1 09:42:52 user.debug kernel: CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
* Jul 1 09:42:52 user.debug kernel: CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
* Jul 1 09:42:52 user.warn kernel: CPU: AMD Duron(tm) stepping 01
* Jul 1 09:42:52 user.info kernel: Enabling fast FPU save and restore. done.
* Jul 1 09:42:52 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
* Jul 1 09:42:52 user.info kernel: Checking 'hlt' instruction. OK.
* Jul 1 09:42:52 user.warn kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
* Jul 1 09:42:52 user.warn kernel: POSIX conformance testing by UNIFIX
* Jul 1 09:42:52 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
* Jul 1 09:42:52 user.warn kernel: mtrr: detected mtrr type: Intel
* Jul 1 09:42:52 user.info kernel: ACPI: Subsystem revision 20040326
* Jul 1 09:42:52 user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
* Jul 1 09:42:52 user.info kernel: PCI: Using configuration type 1
* Jul 1 09:42:52 user.info kernel: ACPI: Interpreter enabled
* Jul 1 09:42:52 user.info kernel: ACPI: Using PIC for interrupt routing
* Jul 1 09:42:52 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
* Jul 1 09:42:52 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
* Jul 1 09:42:52 user.warn kernel: PCI: Probing PCI hardware (bus 00)
* Jul 1 09:42:52 user.info kernel: PCI: Via IRQ fixup
* Jul 1 09:42:52 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
* Jul 1 09:42:52 user.info kernel: ACPI: Power Resource [URP1] (off)
* Jul 1 09:42:52 user.info kernel: ACPI: Power Resource [URP2] (off)
* Jul 1 09:42:52 user.info kernel: ACPI: Power Resource [FDDP] (off)
* Jul 1 09:42:52 user.info kernel: ACPI: Power Resource [LPTP] (off)
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
* Jul 1 09:42:52 user.info kernel: PCI: Probing PCI hardware
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
* Jul 1 09:42:52 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
* Jul 1 09:42:52 user.warn kernel: PCI: No IRQ known for interrupt pin A of device 00:11.1
* Jul 1 09:42:52 user.info kernel: PCI: Using ACPI for IRQ routing
* Jul 1 09:42:52 user.info kernel: Linux NET4.0 for Linux 2.4
* Jul 1 09:42:52 user.info kernel: Based upon Swansea University Computer Society NET3.039
* Jul 1 09:42:52 user.warn kernel: Initializing RT netlink socket
* Jul 1 09:42:52 user.warn kernel: Starting kswapd
* Jul 1 09:42:52 user.info kernel: Journalled Block Device driver loaded
* Jul 1 09:42:52 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
* Jul 1 09:42:52 user.info kernel: devfs: boot_options: 0x1
* Jul 1 09:42:52 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
* Jul 1 09:42:52 user.info kernel: ACPI: Power Button (FF) [PWRF]
* Jul 1 09:42:52 user.info kernel: ton (CM) [SLPB]
* Jul 1 09:42:52 user.info kernel: ACPI: Processor [CPU1] (supports C1)
* Jul 1 09:42:52 user.warn kernel: pty: 256 Unix98 ptys configured
* Jul 1 09:42:52 user.info kernel: Real Time Clock Driver v1.10f
* Jul 1 09:42:52 user.warn kernel: keyboard: Timeout - AT keyboard not present?(ed)
* Jul 1 09:42:52 user.warn kernel: keyboard: Timeout - AT keyboard not present?(f4)
* Jul 1 09:42:52 user.warn kernel: floppy0: no floppy controllers found
* Jul 1 09:42:52 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
* Jul 1 09:42:52 user.info kernel: loop: loaded (max 8 devices)
* Jul 1 09:42:52 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
* Jul 1 09:42:52 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
* Jul 1 09:42:52 user.info kernel: e1000: 00:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:37:d3:92
* Jul 1 09:42:52 user.info kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
* Jul 1 09:42:52 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
* Jul 1 09:42:52 user.warn kernel: FW Version=$Version$
* Jul 1 09:42:52 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
* Jul 1 09:42:52 user.info kernel: ThunderLAN driver v1.15
* Jul 1 09:42:52 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
* Jul 1 09:42:52 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
* Jul 1 09:42:52 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
* Jul 1 09:42:52 user.warn kernel: sk98lin: No adapter found.
* Jul 1 09:42:52 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
* Jul 1 09:42:52 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
* Jul 1 09:42:52 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Jul 1 09:42:52 user.info kernel: SiI680: IDE controller at PCI slot 00:09.0
* Jul 1 09:42:52 user.info kernel: SiI680: chipset revision 2
* Jul 1 09:42:52 user.info kernel: SiI680: not 100% native mode: will probe irqs later
* Jul 1 09:42:52 user.info kernel: SiI680: BASE CLOCK == 133
* Jul 1 09:42:52 user.info kernel: ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
* Jul 1 09:42:52 user.info kernel: ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
* Jul 1 09:42:52 user.info kernel: VP_IDE: IDE controller at PCI slot 00:11.1
* Jul 1 09:42:52 user.warn kernel: PCI: No IRQ known for interrupt pin A of device 00:11.1
* Jul 1 09:42:52 user.info kernel: VP_IDE: chipset revision 6
* Jul 1 09:42:52 user.info kernel: VP_IDE: not 100% native mode: will probe irqs later
* Jul 1 09:42:52 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
* Jul 1 09:42:52 user.info kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
* Jul 1 09:42:52 user.info kernel: ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:DMA, hdf:DMA
* Jul 1 09:42:52 user.info kernel: ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:DMA, hdh:DMA
* Jul 1 09:42:52 user.warn kernel: hda: ST340823A, ATA DISK drive
* Jul 1 09:42:52 user.warn kernel: hde: HDS722525VLAT80, ATA DISK drive
* Jul 1 09:42:52 user.warn kernel: hdf: Maxtor 7L300R0, ATA DISK drive
* Jul 1 09:42:52 user.warn kernel: hdg: Maxtor 7L300R0, ATA DISK drive
* Jul 1 09:42:52 user.warn kernel: hdh: ST3320620A, ATA DISK drive
* Jul 1 09:42:52 user.warn kernel: ide0 at 0xe0028f80-0xe0028f87,0xe0028f8a on irq 10
* Jul 1 09:42:52 user.warn kernel: ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
* Jul 1 09:42:52 user.warn kernel: ide3 at 0x170-0x177,0x376 on irq 15
* Jul 1 09:42:52 user.warn kernel: hda: attached ide-disk driver.
* Jul 1 09:42:52 user.warn kernel: hda: host protected area => 1
* Jul 1 09:42:52 user.info kernel: hda: setmax LBA 78165361, native 78165360
* Jul 1 09:42:52 user.info kernel: hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=77545/16/63, UDMA(100)
* Jul 1 09:42:52 user.warn kernel: hde: attached ide-disk driver.
* Jul 1 09:42:52 user.warn kernel: hde: host protected area => 1
* Jul 1 09:42:52 user.info kernel: hde: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63, UDMA(100)
* Jul 1 09:42:52 user.warn kernel: hdf: attached ide-disk driver.
* Jul 1 09:42:52 user.warn kernel: hdf: host protected area => 1
* Jul 1 09:42:52 user.info kernel: hdf: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
* Jul 1 09:42:52 user.warn kernel: hdg: attached ide-disk driver.
* Jul 1 09:42:52 user.warn kernel: hdg: host protected area => 1
* Jul 1 09:42:52 user.info kernel: hdg: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
* Jul 1 09:42:52 user.warn kernel: hdh: attached ide-disk driver.
* Jul 1 09:42:52 user.warn kernel: hdh: host protected area => 1
* Jul 1 09:42:52 user.info kernel: hdh: 625142448 sectors (320073 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(100)
* Jul 1 09:42:52 user.info kernel: Partition check:
* Jul 1 09:42:52 user.info kernel: /dev/ide/host0/bus0/target0/lun0: [PTBL] [5169/240/63] p1
* Jul 1 09:42:52 user.info kernel: /dev/ide/host2/bus0/target0/lun0: p1
* Jul 1 09:42:52 user.info kernel: /dev/ide/host2/bus0/target1/lun0: p1
* Jul 1 09:42:52 user.info kernel: /dev/ide/host2/bus1/target0/lun0: p1
* Jul 1 09:42:52 user.info kernel: /dev/ide/host2/bus1/target1/lun0: p1
* Jul 1 09:42:52 user.info kernel: SCSI subsystem driver Revision: 1.00
* Jul 1 09:42:52 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
* Jul 1 09:42:52 user.info kernel: Detecting Adaptec I2O RAID controllers.
* Jul 1 09:42:52 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
* Jul 1 09:42:52 user.warn kernel: scsi: Detection failed (no card)
* Jul 1 09:42:52 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
* Jul 1 09:42:52 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
* Jul 1 09:42:52 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
* Jul 1 09:42:52 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
* Jul 1 09:42:52 user.warn kernel: 3w-xxxx: No cards found.
* Jul 1 09:42:52 user.debug kernel: libata version 1.20 loaded.
* Jul 1 09:42:52 user.info kernel: raw1394: /dev/raw1394 device initialized
* Jul 1 09:42:52 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
* Jul 1 09:42:52 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
* Jul 1 09:42:52 user.info kernel: usb.c: registered new driver usbdevfs
* Jul 1 09:42:52 user.emerg kernel: 6>usb.c: registered new driver hub
* Jul 1 09:42:52 user.info kernel: ehci_hcd 00:10.3: PCI device 1106:3104
* Jul 1 09:42:52 user.info kernel: ehci_hcd 00:10.3: irq 12, pci mem e002ce00
* Jul 1 09:42:52 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
* Jul 1 09:42:52 user.info kernel: ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
* Jul 1 09:42:52 user.info kernel: hub.c: USB hub found
* Jul 1 09:42:52 user.info kernel: hub.c: 6 ports detected
* Jul 1 09:42:52 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
* Jul 1 09:42:52 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd400, IRQ 5
* Jul 1 09:42:52 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
* Jul 1 09:42:52 user.info kernel: hub.c: USB hub found
* Jul 1 09:42:52 user.info kernel: hub.c: 2 ports detected
* Jul 1 09:42:52 user.info kernel: host/uhci.c: USB UHCI at I/O 0xd000, IRQ 10
* Jul 1 09:42:52 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
* Jul 1 09:42:52 user.info kernel: hub.c: USB hub found
* Jul 1 09:42:52 user.info kernel: hub.c: 2 ports detected
* Jul 1 09:42:52 user.info kernel: host/uhci.c: USB UHCI at I/O 0xcc00, IRQ 11
* Jul 1 09:42:52 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
* Jul 1 09:42:52 user.info kernel: hub.c: USB hub found
* Jul 1 09:42:52 user.info kernel: hub.c: 2 ports detected
* Jul 1 09:42:52 user.info kernel: usb.c: registered new driver usbkbd
* Jul 1 09:42:52 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
* Jul 1 09:42:52 user.info kernel: Initializing USB Mass Storage driver.
* Jul 1 09:42:52 user.info kernel: usb.c: registered new driver usb-storage
* Jul 1 09:42:52 user.info kernel: USB Mass Storage support registered.
* Jul 1 09:42:52 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
* Jul 1 09:42:52 user.info kernel: IP Protocols: ICMP, UDP, TCP
* Jul 1 09:42:52 user.info kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
* Jul 1 09:42:52 user.info kernel: TCP: Hash tables configured (established 32768 bind 65536)
* Jul 1 09:42:52 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
* Jul 1 09:42:52 user.notice kernel: RAMDISK: NASLite file system found at block 0
* Jul 1 09:42:52 user.warn kernel: .<6>hub.c: new USB device 00:10.3-2, assigned address 2
* Jul 1 09:42:52 user.warn kernel: .<6>scsi1 : SCSI emulation for USB Mass Storage devices
* Jul 1 09:42:52 user.warn kernel: Vendor: ST350063 Model: 0AS Rev:
* Jul 1 09:42:52 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
* Jul 1 09:42:52 user.warn kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
* Jul 1 09:42:52 user.warn kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
* Jul 1 09:42:52 user.info kernel: /dev/scsi/host1/bus0/target0/lun0:<6>Freeing initrd memory: 1962k freed
* Jul 1 09:42:52 user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
* Jul 1 09:42:52 user.warn kernel: VFS: Mounted root (ext2 filesystem).
* Jul 1 09:42:52 user.info kernel: Mounted devfs on /dev
* Jul 1 09:42:52 user.info kernel: Freeing unused kernel memory: 540k freed
* Jul 1 09:42:52 user.warn kernel: p1
* Jul 1 09:42:52 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
* Jul 1 09:42:52 user.debug kernel: USB Mass Storage device found at 2
* Jul 1 09:42:52 user.info kernel: hub.c: new USB device 00:10.3-3, assigned address 3
* Jul 1 09:42:52 user.info kernel: scsi2 : SCSI emulation for USB Mass Storage devices
* Jul 1 09:42:52 user.warn kernel: Vendor: WDC WD32 Model: 00AAJB-00TYA0 Rev: 00.0
* Jul 1 09:42:52 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
* Jul 1 09:42:52 user.warn kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
* Jul 1 09:42:52 user.warn kernel: SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
* Jul 1 09:42:52 user.info kernel: /dev/scsi/host2/bus0/target0/lun0: p1
* Jul 1 09:42:52 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
* Jul 1 09:42:52 user.debug kernel: USB Mass Storage device found at 3
* Jul 1 09:42:52 user.info kernel: hub.c: new USB device 00:10.3-4, assigned address 4
* Jul 1 09:42:52 user.info kernel: scsi3 : SCSI emulation for USB Mass Storage devices
* Jul 1 09:42:52 user.warn kernel: Vendor: USB2.0 Model: USB Flash Disk Rev: 0.00
* Jul 1 09:42:52 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
* Jul 1 09:42:52 user.warn kernel: Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 0
* Jul 1 09:42:52 user.warn kernel: SCSI device sdc: 128000 512-byte hdwr sectors (66 MB)
* Jul 1 09:42:52 user.warn kernel: sdc: Write Protect is off
* Jul 1 09:42:52 user.info kernel: /dev/scsi/host3/bus0/target0/lun0: p1
* Jul 1 09:42:52 user.debug kernel: WARNING: USB Mass Storage data integrity not assured
* Jul 1 09:42:52 user.debug kernel: USB Mass Storage device found at 4
* Jul 1 09:42:52 user.info kernel: hub.c: new USB device 00:10.0-1, assigned address 2
* Jul 1 09:42:52 user.info kernel: hub.c: USB hub found
* Jul 1 09:42:52 user.info kernel: hub.c: 4 ports detected
* Jul 1 09:42:52 user.info kernel: hub.c: new USB device 00:10.0-1.1, assigned address 3
* Jul 1 09:42:52 user.info kernel: input0: Microsoft Natural Keyboard Pro on usb4:3.0
* Jul 1 09:42:52 user.info kernel: igned address 4
* Jul 1 09:42:52 user.warn kernel: usb.c: USB device 4 (vend/prod 0x5fe/0x11) is not claimed by any active driver.
* Jul 1 09:42:52 user.warn kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002
* Jul 1 09:42:52 user.warn kernel: ^ISense class 7, sense error 0, extended sense 0
* Jul 1 09:42:52 user.info kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
* Jul 1 09:42:52 user.warn kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002
* Jul 1 09:42:52 user.warn kernel: ^ISense class 7, sense error 0, extended sense 0
* Jul 1 09:42:52 user.info kernel: kjournald starting. Commit interval 5 seconds
* Jul 1 09:42:52 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
* Jul 1 09:42:52 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Jul 1 09:42:52 user.info kernel: kjournald starting. Commit interval 5 seconds
* Jul 1 09:42:52 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,1), internal journal
* Jul 1 09:42:52 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Jul 1 09:42:52 user.info kernel: kjournald starting. Commit interval 5 seconds
* Jul 1 09:42:52 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,65), internal journal
* Jul 1 09:42:52 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Jul 1 09:42:52 user.info kernel: kjournald starting. Commit interval 5 seconds
* Jul 1 09:42:52 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,1), internal journal
* Jul 1 09:42:52 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Jul 1 09:42:52 user.info kernel: kjournald starting. Commit interval 5 seconds
* Jul 1 09:42:52 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,65), internal journal
* Jul 1 09:42:52 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Jul 1 09:42:52 user.info kernel: kjournald starting. Commit interval 5 seconds
* Jul 1 09:42:52 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
* Jul 1 09:42:52 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Jul 1 09:42:52 user.info kernel: kjournald starting. Commit interval 5 seconds
* Jul 1 09:42:52 user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,17), internal journal
* Jul 1 09:42:52 user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
* Jul 1 09:44:18 user.info kernel: usb.c: USB disconnect on device 00:10.0-1.4 address 4
* Jul 1 09:48:13 user.info kernel: usb.c: USB disconnect on device 00:10.0-1 address 2
* Jul 1 09:48:13 user.info kernel: usb.c: USB disconnect on device 00:10.0-1.1 address 3

ftp:-
ftp> bin
200 Switching to Binary mode.
ftp> mget *.iso
mget smoothwall-express-3.0-Backup-20080618-i386.iso? y
200 PORT command successful. Consider using PASV.
150 Opening BINARY mode data connection for smoothwall-express-3.0-Backup-20080618-i386.iso (124813312 bytes).
226 File send OK.
124813312 bytes received in 17.29 secs (7051.3 kB/s)

ftp from Usb disk:-
150 Opening BINARY mode data connection for pup_save.2fs (536870912 bytes).
226 File send OK.
536870912 bytes received in 57.07 secs (9187.3 kB/s)
ftp>

so seems to be the network rather than the ide bus that is slow.
Top
 Profile  
 
mikeiver1
 Post subject: Re: FTP/NFS speed low.
PostPosted: Tue Jul 01, 2008 1:32 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
Tony, Ralph?

I have had a couple of boards that just would not perform no matter what I did under NL. I have personally had much more luck with Intel based boards than AMDs for reasons unknown. My first machine was based on a P100, then I went to a P200MMX, followed by a AMD K6/2 400. all three performed great with a bit of a boost in performance as I upgraded. I did have a Duron 800 machine that just wouldn't run stable, I know the issue was with the MB. The next upgrade was an Athlon 1800, it worked but was again not a stable platform. I am currently running a P4 Celeron 2000/400 on an Intel desktop MB and this is by far the best platform yet. I have several terabytes of transfer through the box with not one issue, all at gigabit speeds. I have been lucky in that the NICs I have used have all been supported and just run out of the box. I only use 3Com and Intel as a rule since I pick them up at the local swap meets and surplus stores for REAL CHEAP.

I mention the above in the hopes of pointing out that it can sometimes take a bit of trial and error to get to where one wants with this hardware but once you do hit the target it is so sweet!

Lets see what Tony and/or Ralph have to throw in.

Mike
Top
 Profile  
 
Tony
 Post subject: Re: FTP/NFS speed low.
PostPosted: Wed Jul 02, 2008 12:54 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Hardware performance can vary greatly for a variety of reasons. Most consumer-grade boards are designed for use with Windows, so BIOS and associated drivers are designed with that in mind. There is a lot to be said for drivers designed specifically for a given hardware. Another thing to consider, just because a board has impressive specs, it's performance may not always meet expectations, regardless of the operating system.

Set the BIOS to defaults to make sure bus timing and such is correct, then turn off com, lpt, audio, etc. that is not used by NASLite and give that a try.

Another thought, the transfer specs posted above are suspiciously in line with 100T networks, so I'd take a serious look at cabling, switches, etc. Try crossover to an equivalent client and see what you get.
Top
 Profile  
 
biker
 Post subject: Re: FTP/NFS speed low.
PostPosted: Wed Jul 02, 2008 1:29 pm 
Offline

Joined: Fri Nov 02, 2007 5:21 am
Posts: 18
Well having spent all day trying different m/b's and trying to get them to boot from usb, I have ended up with my old board.
HOWEVER NOW IT SAYS CAN'T FIND CONFIGURATION DEVICE and SHUTS DOWN. Even though it has just booted from it.
Tried a different flash disk and it says the same.
HELP !!!
Top
 Profile  
 
NickC
 Post subject: Re: FTP/NFS speed low.
PostPosted: Wed Jul 02, 2008 1:43 pm 
Offline

Joined: Fri Jan 12, 2007 4:27 am
Posts: 577
Location: Scotland
If your old board has been out of a PC for a while then there is the possibility that when you think that you are saving the BIOS settings - it doesn't. Also, some boards "lose" the boot-from-USB option if the machine is ever switched on with the USB device removed.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 20 posts ]  Go to page 1, 2  Next

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 76 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group