NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Thu Apr 18, 2024 9:51 pm

View unanswered posts | View active topics


Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next
  Previous topic | Next topic 
Author Message
flinstone
PostPosted: Tue Jan 15, 2008 10:22 am 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
Hi all,
I am very happy with the possibility to use your iTunes library on the NASlite server. really! :lol: :mrgreen:
What I like to know is: Is it save to have three computers accessing that library at the same time????
All computers must be able to add songs, give a star rating, put pictures to the songs, and of-course play music at ones.
Thanks in advance.

PS: Any update on how to switch of the server message (network storage. OK? return. thing)


Last edited by flinstone on Mon Jan 21, 2008 10:36 am, edited 1 time in total.

Top
 Profile  
 
Tony
PostPosted: Tue Jan 15, 2008 6:36 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
It is safe to have multiple iTunes clients accessing NASlite at the same time. You should be able to add content but you may have to refresh the iTunes cache.

As far as the message you get when you connect, that is an OSX message and not something NASLite issues or controls.
Top
 Profile  
 
flinstone
PostPosted: Sat Jan 19, 2008 11:28 am 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
Thanks for the info! Great That is exactly where i was hoping for :P

On the other issue,
When I change the name of the server message in NASlite network settings, in let say "Hello I am NASlite" Than I get that message when I connect to every single disk in my NASlite box. Correct me if I am wrong (I am not an expert) but I think that means that the message is initiated by NASlite. Maybe it is possible to automatic mount all the drives at ones and ignore the messages?

Really would like a solution of some kind. OS-X or NASlite wise.
Thanks in advance!
Top
 Profile  
 
flinstone
PostPosted: Mon Jan 21, 2008 10:59 am 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
Damn!
I was hoping you're right. But sadly it's not the case. :( :cry:
When I connect with only one OS-X machine all thumm up and it works like a charm!
But when I connect to the library with the second machine I get this message..... The file iTunes library is on a protected drive and cannot be used because you don't have privileges (translation sorry) It doesn't make a difference which computer I start using iTunes the first. First computer is always able to connect without a problem (If I first manually mounted the drive and say OK to the NASlite message I was talking about here: viewtopic.php?f=9&t=2322. Please read I cannot figure this out on my own!) I hope I overlooked something and that there is a good sole who can help me.
Thanks a lot in advance.

PS: (3x Leopard 1x Tiger)
Top
 Profile  
 
mikeiver1
PostPosted: Fri Feb 01, 2008 12:18 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
Welcome to the wonderful world of content managment, check your rights at the door!

Mike
Top
 Profile  
 
flinstone
PostPosted: Tue Feb 19, 2008 12:54 pm 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:
Top
 Profile  
 
flinstone
PostPosted: Thu Apr 10, 2008 5:32 pm 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
I now have upgraded to iTunes+ (no DRM) and still have the same problem (it cost me €38.- )
I really like to know if there is some work in progress and what the next update will bring (I have more problems with NASlite than only this. so for instance. is there going to be any improvement in data transfer ((5sec's fast 2sec's no data troghput)) ETC. I hope there will be some update soon. Thanks,
Oz

In my opinion, at this moment NASlite+ was faster, the only thing in NASlite 2.0.6 is that i can use iTunes (1 client at a time) That is OK but not that good....
Top
 Profile  
 
mikeiver1
PostPosted: Thu Apr 10, 2008 9:06 pm 
Offline

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!
flinstone wrote:
....(I have more problems with NASlite than only this. so for instance. is there going to be any improvement in data transfer ((5sec's fast 2sec's no data troghput)) ETC. I hope there will be some update soon. Thanks,
Oz

In my opinion, at this moment NASlite+ was faster, the only thing in NASlite 2.0.6 is that i can use iTunes (1 client at a time) That is OK but not that good....


You most likely have a problem with IRQ assignment on your box that is causing the funny transfer issue. Make sure that you have disabled all unused devices on the motherboard and that the NIC is supported fully. You might even consider getting one of the Intel Gigabit NICs and see if your problem persists.

Either way the problem is on your side and not likely NL2.0.6

Mike
Top
 Profile  
 
dimension
PostPosted: Thu Apr 10, 2008 9:13 pm 
Offline

Joined: Tue Aug 10, 2004 1:50 pm
Posts: 604
Location: Texas, USA
It was mentioned somewhere that Naslite includes a generic IDE driver that will work on all IDE controllers but without DMA support. Without DMA you get the slow transfer. But I agree with Mike above. The problem is not with Naslite.
Top
 Profile  
 
flinstone
PostPosted: Fri Apr 11, 2008 4:47 am 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
Hello,
Thanks for responding. I have a Intel pro 1000 NIC. That is the only pci card i have in the box. It is a Asus motherboard with a celeron 2,1Ghz cpu, There are three internal ata drives inside that run in dma mode fine. It is the same box i used with naslite+ under nfs and was fast. I upgraded to NASlite 2.0.6 for iTunes and it still was fast. than i added a 500GB USB drive, it still was fast! But suddenly out of nowhere my transfers are getting interrupted???? It is so strange i don't understand it for a little bit. All parts in the box are fairly new, cables just replaced. How do i go from here? i must check IRQ's. can i do that via telnet? Or do i have to get the box so i can connect it to a monitor?

Any help is appreciated.
Top
 Profile  
 
Tony
PostPosted: Fri Apr 11, 2008 10:42 am 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
If you keep adding hardware to the machine, at what point did your performance degrade? That may be an indication of what to look for. If we are talking about transfers to/from your USB drive, then that is to be expected. USB is slow in comparison to SATA, IDE, etc. Anyway, take the USB drives off and check the performance. If it's still poor, then post a syslog for a closer look.

You can use multiple iTunes clients with a single NAS, but you have to keep the index on the clients and not the server.
Top
 Profile  
 
flinstone
PostPosted: Fri Apr 11, 2008 2:34 pm 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
OK. I think we are getting some ware now!! Without the USB drive all things are OK!!!!!!!! But with the USB drive the problem is there but also on the internal IDE drives???? That isss strange right???
Please lets fix this.
Many thanks in advance.
Top
 Profile  
 
flinstone
PostPosted: Fri Apr 11, 2008 2:57 pm 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
By the way. Index files on the clients????? How does that work? and is the library in sync on al clients?? Interesting! (All leopard users here (1Tiger))
Top
 Profile  
 
Tony
PostPosted: Fri Apr 11, 2008 4:35 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
Each client is autonomous and manages a local index of what is on the server. The server holds only the actual media files. BTW, What is the significance of all clients being in sync and why does it matter?

As far as fixing the performance problem, I suspect that adding the USB disk to your NAS causes an IRQ to be shared hence the speed drop. I'd still like to see a syslog for some details.
Top
 Profile  
 
flinstone
PostPosted: Sat Apr 12, 2008 10:24 am 
Offline

Joined: Wed Dec 05, 2007 9:33 am
Posts: 49
I like the clients to be in sync because sometimes i make a playlist in the study witch i later like to play downstairs, or when i am in the kitchen and i hear i nice song i like to rate it so that i later can find it more easy when i am somewhere els in the house. Or my girlfriend makes a playlist that she likes and i reeaaly must here it. (i might have a little to many Mac's but i like them so much!) This works great just as long as there is no buddy els in the house who is using iTunes. So i guess you understand that quiet often there is some yelling in the house like "who is using iTunes!? i want it now!!"

Anyway. Here is my syslog. (when USB drive is connected)

System Message Log:

Apr 11 18:28:06 The user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
Apr 11 18:28:06 The user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
Apr 11 18:28:06 The user.info kernel: BIOS-provided physical RAM map:
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Apr 11 18:28:06 The user.warn kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Apr 11 18:28:06 The user.notice kernel: 0MB HIGHMEM available.
Apr 11 18:28:06 The user.notice kernel: 767MB LOWMEM available.
Apr 11 18:28:06 The user.warn kernel: On node 0 totalpages: 196604
Apr 11 18:28:06 The user.warn kernel: zone(0): 4096 pages.
Apr 11 18:28:06 The user.warn kernel: zone(1): 192508 pages.
Apr 11 18:28:06 The user.warn kernel: zone(2): 0 pages.
Apr 11 18:28:06 The user.info kernel: ACPI: RSDP (v000 ASUS ) @ 0x000f5690
Apr 11 18:28:06 The user.info kernel: ACPI: RSDT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x2fffc000
Apr 11 18:28:06 The user.info kernel: ACPI: FADT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x2fffc0c0
Apr 11 18:28:06 The user.info kernel: ACPI: BOOT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x2fffc030
Apr 11 18:28:06 The user.info kernel: ACPI: MADT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x2fffc058
Apr 11 18:28:06 The user.info kernel: ACPI: DSDT (v001 ASUS P4S533-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
Apr 11 18:28:06 The user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
Apr 11 18:28:06 The user.info kernel: Initializing CPU#0
Apr 11 18:28:06 The user.warn kernel: Detected 2100.173 MHz processor.
Apr 11 18:28:06 The user.warn kernel: Console: colour VGA+ 80x25
Apr 11 18:28:06 The user.warn kernel: Calibrating delay loop. 4194.30 BogoMIPS
Apr 11 18:28:06 The user.info kernel: Memory: 771160k/786416k available (2214k kernel code, 14868k reserved, 642k data, 540k init, 0k highmem)
Apr 11 18:28:06 The user.info kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 11 18:28:06 The user.info kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Apr 11 18:28:06 The user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Apr 11 18:28:06 The user.info kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 11 18:28:06 The user.warn kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Apr 11 18:28:06 The user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Apr 11 18:28:06 The user.info kernel: CPU: L2 cache: 128K
Apr 11 18:28:06 The user.debug kernel: CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
Apr 11 18:28:06 The user.debug kernel: CPU: Common caps: bfebfbff 00000000 00000000 00000000
Apr 11 18:28:06 The user.warn kernel: CPU: Intel(R) Celeron(R) CPU 2.10GHz stepping 07
Apr 11 18:28:06 The user.info kernel: Enabling fast FPU save and restore. done.
Apr 11 18:28:06 The user.info kernel: Enabling unmasked SIMD FPU exception support. done.
Apr 11 18:28:06 The user.info kernel: Checking 'hlt' instruction. OK.
Apr 11 18:28:06 The user.warn kernel: ACPI: IRQ9 SCI: Level Trigger.
Apr 11 18:28:06 The user.warn kernel: POSIX conformance testing by UNIFIX
Apr 11 18:28:06 The user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Apr 11 18:28:06 The user.warn kernel: mtrr: detected mtrr type: Intel
Apr 11 18:28:06 The user.info kernel: ACPI: Subsystem revision 20040326
Apr 11 18:28:06 The user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1060, last bus=1
Apr 11 18:28:06 The user.info kernel: PCI: Using configuration type 1
Apr 11 18:28:06 The user.info kernel: ACPI: Interpreter enabled
Apr 11 18:28:06 The user.info kernel: ACPI: Using PIC for interrupt routing
Apr 11 18:28:06 The user.info kernel: ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 18:28:06 The user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Apr 11 18:28:06 The user.warn kernel: PCI: Probing PCI hardware (bus 00)
Apr 11 18:28:06 The user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 11 18:28:06 The user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Apr 11 18:28:06 The user.info kernel: PCI: Probing PCI hardware
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Apr 11 18:28:06 The user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
Apr 11 18:28:06 The user.info kernel: PCI: Using ACPI for IRQ routing
Apr 11 18:28:06 The user.info kernel: Linux NET4.0 for Linux 2.4
Apr 11 18:28:06 The user.info kernel: Based upon Swansea University Computer Society NET3.039
Apr 11 18:28:06 The user.warn kernel: Initializing RT netlink socket
Apr 11 18:28:06 The user.warn kernel: kswapd
Apr 11 18:28:06 The user.info kernel: Journalled Block Device driver loaded
Apr 11 18:28:06 The user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Apr 11 18:28:06 The user.info kernel: devfs: boot_options: 0x1
Apr 11 18:28:06 The user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Apr 11 18:28:06 The user.info kernel: ACPI: Power Button (FF) [PWRF]
Apr 11 18:28:06 The user.info kernel: ACPI: Processor [CPU0] (supports C1)
Apr 11 18:28:06 The user.info kernel: ACPI: Processor [CPU1] (supports C1)
Apr 11 18:28:06 The user.warn kernel: pty: 256 Unix98 ptys configured
Apr 11 18:28:06 The user.info kernel: Real Time Clock Driver v1.10f
Apr 11 18:28:06 The user.info kernel: Floppy drive(s): fd0 is 1.44M
Apr 11 18:28:06 The user.info kernel: FDC 0 is a post-1991 82077
Apr 11 18:28:06 The user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Apr 11 18:28:06 The user.info kernel: loop: loaded (max 8 devices)
Apr 11 18:28:06 The user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Apr 11 18:28:06 The user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
Apr 11 18:28:06 The user.info kernel: e1000: 00:10.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:0e:a1:5f
Apr 11 18:28:06 The user.info kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Apr 11 18:28:06 The user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Apr 11 18:28:06 The user.warn kernel: FW Version=$Version$
Apr 11 18:28:06 The user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Apr 11 18:28:06 The user.info kernel: ThunderLAN driver v1.15
Apr 11 18:28:06 The user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Apr 11 18:28:06 The user.info kernel: sis900.c: v1.08.07 11/02/2003
Apr 11 18:28:06 The user.warn kernel: PCI: Enabling device 00:04.0 (0004 -> 0007)
Apr 11 18:28:06 The user.info kernel: eth1: Realtek RTL8201 PHY transceiver found at address 1.
Apr 11 18:28:06 The user.info kernel: eth1: Using transceiver found at address 1 as default
Apr 11 18:28:06 The user.info kernel: eth1: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 12, 00:0c:6e:0e:1a:3e.
Apr 11 18:28:06 The user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Apr 11 18:28:06 The user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Apr 11 18:28:06 The user.warn kernel: sk98lin: No adapter found.
Apr 11 18:28:06 The user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Apr 11 18:28:06 The user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Apr 11 18:28:06 The user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 11 18:28:06 The user.info kernel: SIS5513: IDE controller at PCI slot 00:02.5
Apr 11 18:28:06 The user.info kernel: SIS5513: chipset revision 0
Apr 11 18:28:06 The user.info kernel: SIS5513: not 100% native mode: will probe irqs later
Apr 11 18:28:06 The user.info kernel: SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Apr 11 18:28:06 The user.info kernel: ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
Apr 11 18:28:06 The user.info kernel: ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
Apr 11 18:28:06 The user.warn kernel: hda: WDC WD800JB-00CRA1, ATA DISK drive
Apr 11 18:28:06 The user.warn kernel: hdb: WDC WD1200JB-00FUA0, ATA DISK drive
Apr 11 18:28:06 The user.warn kernel: hdc: Maxtor 6L300R0, ATA DISK drive
Apr 11 18:28:06 The user.warn kernel: hdd: SAMSUNG CDRW/DVD SM-332B, ATAPI CD/DVD-ROM drive
Apr 11 18:28:06 The user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 11 18:28:06 The user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
Apr 11 18:28:06 The user.warn kernel: hda: attached ide-disk driver.
Apr 11 18:28:06 The user.warn kernel: hda: host protected area => 1
Apr 11 18:28:06 The user.info kernel: hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(100)
Apr 11 18:28:06 The user.warn kernel: hdb: attached ide-disk driver.
Apr 11 18:28:06 The user.warn kernel: hdb: host protected area => 1
Apr 11 18:28:06 The user.info kernel: hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
Apr 11 18:28:06 The user.warn kernel: hdc: attached ide-disk driver.
Apr 11 18:28:06 The user.warn kernel: hdc: host protected area => 1
Apr 11 18:28:06 The user.info kernel: hdc: 586114704 sectors (300091 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
Apr 11 18:28:06 The user.info kernel: Partition check:
Apr 11 18:28:06 The user.info kernel: /dev/ide/host0/bus0/target0/lun0: p1
Apr 11 18:28:06 The user.info kernel: /dev/ide/host0/bus0/target1/lun0: p1
Apr 11 18:28:06 The user.info kernel: /dev/ide/host0/bus1/target0/lun0: p1
Apr 11 18:28:06 The user.info kernel: SCSI subsystem driver Revision: 1.00
Apr 11 18:28:06 The user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Apr 11 18:28:06 The user.info kernel: Detecting Adaptec I2O RAID controllers.
Apr 11 18:28:06 The user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
Apr 11 18:28:06 The user.warn kernel: scsi: Detection failed (no card)
Apr 11 18:28:06 The user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Apr 11 18:28:06 The user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Apr 11 18:28:06 The user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Apr 11 18:28:06 The user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Apr 11 18:28:06 The user.warn kernel: 3w-xxxx: No cards found.
Apr 11 18:28:06 The user.debug kernel: libata version 1.20 loaded.
Apr 11 18:28:06 The user.info kernel: raw1394: /dev/raw1394 device initialized
Apr 11 18:28:06 The user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Apr 11 18:28:06 The user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Apr 11 18:28:06 The user.info kernel: usb.c: registered new driver usbdevfs
Apr 11 18:28:06 The user.info kernel: usb.c: registered new driver hub
Apr 11 18:28:06 The user.warn kernel: PCI: Enabling device 00:03.3 (0004 -> 0006)
Apr 11 18:28:06 The user.info kernel: ehci_hcd 00:03.3: PCI device 1039:7002
Apr 11 18:28:06 The user.info kernel: ehci_hcd 00:03.3: irq 11, pci mem f082c000
Apr 11 18:28:06 The user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Apr 11 18:28:06 The user.debug kernel: PCI: cache line size of 128 is not supported by device 00:03.3
Apr 11 18:28:06 The user.info kernel: ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Apr 11 18:28:06 The user.info kernel: hub.c: USB hub found
Apr 11 18:28:06 The user.info kernel: hub.c: 6 ports detected
Apr 11 18:28:06 The user.info kernel: .1
Apr 11 18:28:06 The user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xf082e000, IRQ 11
Apr 11 18:28:06 The user.info kernel: host/usb-ohci.c: usb-00:03.0, PCI device 1039:7001
Apr 11 18:28:06 The user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Apr 11 18:28:06 The user.info kernel: hub.c: USB hub found
Apr 11 18:28:06 The user.info kernel: hub.c: 3 ports detected
Apr 11 18:28:06 The user.info kernel: host/usb-ohci.c: USB OHCI at membase 0xf0830000, IRQ 10
Apr 11 18:28:06 The user.info kernel: host/usb-ohci.c: usb-00:03.1, PCI device 1039:7001
Apr 11 18:28:06 The user.info kernel: usb.c: new USB bus registered, assigned bus number 3
Apr 11 18:28:06 The user.info kernel: hub.c: USB hub found
Apr 11 18:28:06 The user.info kernel: hub.c: 3 ports detected
Apr 11 18:28:06 The user.info kernel: usb.c: registered new driver usbkbd
Apr 11 18:28:06 The user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Apr 11 18:28:06 The user.info kernel: Initializing USB Mass Storage driver.
Apr 11 18:28:06 The user.info kernel: usb.c: registered new driver usb-storage
Apr 11 18:28:06 The user.info kernel: USB Mass Storage support registered.
Apr 11 18:28:06 The user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 11 18:28:06 The user.info kernel: IP Protocols: ICMP, UDP, TCP
Apr 11 18:28:06 The user.info kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Apr 11 18:28:06 The user.info kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr 11 18:28:06 The user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Apr 11 18:28:06 The user.notice kernel: RAMDISK: NASLite file system found at block 0
Apr 11 18:28:06 The user.warn kernel: .<6>hub.c: new USB device 00:03.3-6, assigned address 2
Apr 11 18:28:06 The user.warn kernel: <6>scsi1 : SCSI emulation for USB Mass Storage devices
Apr 11 18:28:06 The user.warn kernel: Vendor: WDC WD50 Model: 00AAJS-00YFA0 Rev:
Apr 11 18:28:06 The user.warn kernel: Type: Direct-Access ANSI SCSI revision: 02
Apr 11 18:28:06 The user.warn kernel: .Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Apr 11 18:28:06 The user.warn kernel: .SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Apr 11 18:28:06 The user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
Apr 11 18:28:06 The user.debug kernel: WARNING: USB Mass Storage data integrity not assured
Apr 11 18:28:06 The user.debug kernel: USB Mass Storage device found at 2
Apr 11 18:28:06 The user.warn kernel: <6>Freeing initrd memory: 1952k freed
Apr 11 18:28:06 The user.warn kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
Apr 11 18:28:06 The user.warn kernel: VFS: Mounted root (ext2 filesystem).
Apr 11 18:28:06 The user.info kernel: Mounted devfs on /dev
Apr 11 18:28:06 The user.info kernel: Freeing unused kernel memory: 540k freed
Apr 11 18:28:06 The user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.warn kernel: hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hdb: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.warn kernel: hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hdb: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.warn kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.warn kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.info kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Apr 11 18:28:06 The user.warn kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.warn kernel: hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hdb: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.warn kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 11 18:28:06 The user.warn kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
Apr 11 18:28:06 The user.info kernel: kjournald starting. Commit interval 5 seconds
Apr 11 18:28:06 The user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Apr 11 18:28:06 The user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 11 18:28:06 The user.info kernel: kjournald starting. Commit interval 5 seconds
Apr 11 18:28:06 The user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Apr 11 18:28:06 The user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 11 18:28:06 The user.info kernel: kjournald starting. Commit interval 5 seconds
Apr 11 18:28:06 The user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
Apr 11 18:28:06 The user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 11 18:28:06 The user.info kernel: ting. Commit interval 5 seconds
Apr 11 18:28:06 The user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Apr 11 18:28:06 The user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next

Board index » v2.x NASLite Products » NASLite-2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 80 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group