NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Fri Oct 23, 2020 7:26 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: ACPI Question
PostPosted: Sun Dec 09, 2007 8:34 am 
Offline

Joined: Sat Mar 03, 2007 6:25 pm
Posts: 294
Location: Delft NL / Brooklyn NY
In the NASLite status browser window information is given about the ACPI.

In my case only the Power Button is AVAILABLE. Fan State, Cooling Mode, Thermal State and CPU Temp are NOT AVAILABLE.

The motherboard is a Intel D915PSYL.

How do I get NASLite to read & report on the ACPI state?


Top
 Profile  
 
PostPosted: Tue Dec 11, 2007 1:23 am 
Offline

Joined: Sat Mar 03, 2007 6:25 pm
Posts: 294
Location: Delft NL / Brooklyn NY
Maybe someone with more knowledge can review this log file, in respect to missing ACPI functions.
Thanks,
Pieter


Dec 9 06:44:51 user.notice kernel: klogd started: BusyBox v1.01 (2007.03.15-22:03+0000)
Dec 9 06:44:51 user.warn kernel: Linux version 2.4.35.NASLite (root@tzt) (gcc version 3.4.6) #2 Sun Aug 12 09:03:16 EDT 2007
Dec 9 06:44:51 user.info kernel: BIOS-provided physical RAM map:
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 0000000000100000 - 000000003fe2fc00 (usable)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 000000003fe2fc00 - 000000003fe3ecb3 (ACPI NVS)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 000000003ff2fc00 - 000000003ff30000 (ACPI NVS)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
Dec 9 06:44:51 user.warn kernel: BIOS-e820: 00000000fed1c000 - 00000000feda0000 (reserved)
Dec 9 06:44:51 user.notice kernel: 126MB HIGHMEM available.
Dec 9 06:44:51 user.notice kernel: 896MB LOWMEM available.
Dec 9 06:44:51 user.warn kernel: On node 0 totalpages: 261679
Dec 9 06:44:51 user.warn kernel: zone(0): 4096 pages.
Dec 9 06:44:51 user.warn kernel: zone(1): 225280 pages.
Dec 9 06:44:51 user.warn kernel: zone(2): 32303 pages.
Dec 9 06:44:51 user.info kernel: ACPI: RSDP (v000 ACPIAM ) @ 0x000f4ea0
Dec 9 06:44:51 user.info kernel: ACPI: RSDT (v001 INTEL D915PSY 0x20050128 MSFT 0x00000097) @ 0x3ff30000
Dec 9 06:44:51 user.info kernel: ACPI: FADT (v002 INTEL D915PSY 0x20050128 MSFT 0x00000097) @ 0x3ff30200
Dec 9 06:44:51 user.info kernel: ACPI: MADT (v001 INTEL D915PSY 0x20050128 MSFT 0x00000097) @ 0x3ff30390
Dec 9 06:44:51 user.info kernel: ACPI: MCFG (v001 INTEL D915PSY 0x20050128 MSFT 0x00000097) @ 0x3ff30400
Dec 9 06:44:51 user.info kernel: ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 INTL 0x02002026) @ 0x3ff35f90
Dec 9 06:44:51 user.info kernel: ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000010 INTL 0x02002026) @ 0x3ff36030
Dec 9 06:44:51 user.info kernel: ACPI: SSDT (v001 DpgPmm Cpu2Ist 0x00000010 INTL 0x02002026) @ 0x3ff36440
Dec 9 06:44:51 user.info kernel: ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x02002026) @ 0x3ff36850
Dec 9 06:44:51 user.info kernel: ACPI: TCPA (v001 INTEL TBLOEMID 0x00000001 MSFT 0x00000097) @ 0x3ff36990
Dec 9 06:44:51 user.info kernel: ACPI: WDDT (v001 INTEL OEMWDDT 0x00000001 INTL 0x02002026) @ 0x3ff369c4
Dec 9 06:44:51 user.info kernel: ACPI: DSDT (v001 INTEL D915PSY 0x00000001 INTL 0x02002026) @ 0x00000000
Dec 9 06:44:51 user.warn kernel: Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=naslite.01
Dec 9 06:44:51 user.info kernel: Initializing CPU#0
Dec 9 06:44:51 user.warn kernel: Detected 3000.263 MHz processor.
Dec 9 06:44:51 user.warn kernel: Console: colour VGA+ 80x25
Dec 9 06:44:51 user.warn kernel: Calibrating delay loop. 5989.99 BogoMIPS
Dec 9 06:44:51 user.info kernel: Memory: 1028396k/1046716k available (2214k kernel code, 17932k reserved, 642k data, 540k init, 129212k highmem)
Dec 9 06:44:51 user.info kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 9 06:44:51 user.info kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Dec 9 06:44:51 user.info kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Dec 9 06:44:51 user.info kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Dec 9 06:44:51 user.warn kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Dec 9 06:44:51 user.info kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Dec 9 06:44:51 user.debug kernel: CPU: After generic, caps: bfebfbff 20100000 00000000 00000000
Dec 9 06:44:51 user.debug kernel: CPU: Common caps: bfebfbff 20100000 00000000 00000000
Dec 9 06:44:51 user.warn kernel: CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 0a
Dec 9 06:44:51 user.info kernel: Enabling fast FPU save and restore. done.
Dec 9 06:44:51 user.info kernel: Enabling unmasked SIMD FPU exception support. done.
Dec 9 06:44:51 user.info kernel: Checking 'hlt' instruction. OK.
Dec 9 06:44:51 user.warn kernel: ACPI: IRQ9 SCI: Level Trigger.
Dec 9 06:44:51 user.warn kernel: POSIX conformance testing by UNIFIX
Dec 9 06:44:51 user.warn kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Dec 9 06:44:51 user.warn kernel: mtrr: detected mtrr type: Intel
Dec 9 06:44:51 user.info kernel: ACPI: Subsystem revision 20040326
Dec 9 06:44:51 user.info kernel: PCI: Using configuration type 1
Dec 9 06:44:51 user.info kernel: ACPI: Interpreter enabled
Dec 9 06:44:51 user.info kernel: ACPI: Using PIC for interrupt routing
Dec 9 06:44:51 user.info kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
Dec 9 06:44:51 user.info kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Dec 9 06:44:51 user.warn kernel: PCI: Probing PCI hardware (bus 00)
Dec 9 06:44:51 user.info kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Dec 9 06:44:51 user.warn kernel: Transparent bridge - PCI device 8086:244e
Dec 9 06:44:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 9 06:44:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
Dec 9 06:44:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
Dec 9 06:44:51 user.info kernel: ACPI: Power Resource [URP1] (off)
Dec 9 06:44:51 user.info kernel: ACPI: Power Resource [FDDP] (off)
Dec 9 06:44:51 user.info kernel: ACPI: Power Resource [LPTP] (off)
Dec 9 06:44:51 user.info kernel: ACPI: Power Resource [URP2] (off)
Dec 9 06:44:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
Dec 9 06:44:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
Dec 9 06:44:51 user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
Dec 9 06:44:51 user.warn kernel: *11 12 14 15)
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Dec 9 06:44:51 user.info kernel: PCI: Probing PCI hardware
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
Dec 9 06:44:51 user.warn kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
Dec 9 06:44:51 user.info kernel: PCI: Using ACPI for IRQ routing
Dec 9 06:44:51 user.info kernel: Linux NET4.0 for Linux 2.4
Dec 9 06:44:51 user.info kernel: Based upon Swansea University Computer Society NET3.039
Dec 9 06:44:51 user.warn kernel: Initializing RT netlink socket
Dec 9 06:44:51 user.warn kernel: Starting kswapd
Dec 9 06:44:51 user.warn kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces
Dec 9 06:44:51 user.info kernel: Journalled Block Device driver loaded
Dec 9 06:44:51 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Dec 9 06:44:51 user.info kernel: devfs: boot_options: 0x1
Dec 9 06:44:51 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Dec 9 06:44:51 user.info kernel: ACPI: Power Button (FF) [PWRF]
Dec 9 06:44:51 user.info kernel: ACPI: Processor [CPU1] (supports C1, 2 performance states, 8 throttling states)
Dec 9 06:44:51 user.info kernel: ACPI: Processor [CPU2] (supports C1, 2 performance states, 8 throttling states)
Dec 9 06:44:51 user.warn kernel: pty: 256 Unix98 ptys configured
Dec 9 06:44:51 user.info kernel: Real Time Clock Driver v1.10f
Dec 9 06:44:51 user.info kernel: Floppy drive(s): fd0 is 1.44M
Dec 9 06:44:51 user.warn kernel: keyboard: Timeout - AT keyboard not present?(ed)
Dec 9 06:44:51 user.warn kernel: keyboard: Timeout - AT keyboard not present?(f4)
Dec 9 06:44:51 user.info kernel: FDC 0 is a post-1991 82077
Dec 9 06:44:51 user.warn kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Dec 9 06:44:51 user.info kernel: loop: loaded (max 8 devices)
Dec 9 06:44:51 user.info kernel: Intel(R) PRO/1000 Network Driver - version 7.3.20-k4
Dec 9 06:44:51 user.info kernel: Copyright (c) 1999-2006 Intel Corporation.
Dec 9 06:44:51 user.info kernel: dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
Dec 9 06:44:51 user.warn kernel: FW Version=$Version$
Dec 9 06:44:51 user.info kernel: pcnet32.c:v1.30h 06.24.2004 tsbogend@alpha.franken.de
Dec 9 06:44:51 user.info kernel: ThunderLAN driver v1.15
Dec 9 06:44:51 user.info kernel: TLAN: 0 devices installed, PCI: 0 EISA: 0
Dec 9 06:44:51 user.info kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Dec 9 06:44:51 user.info kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Dec 9 06:44:51 user.notice kernel: Intel(R) PRO/100 Network Driver - version 2.3.43-k1
Dec 9 06:44:51 user.notice kernel: Copyright (c) 2004 Intel Corporation
Dec 9 06:44:51 user.notice kernel:
Dec 9 06:44:51 user.debug kernel: e100: selftest OK.
Dec 9 06:44:51 user.notice kernel: e100: eth0: Intel(R) PRO/100 Network Connection
Dec 9 06:44:51 user.notice kernel: Hardware receive checksums enabled
Dec 9 06:44:51 user.notice kernel:
Dec 9 06:44:51 user.warn kernel: sk98lin: No adapter found.
Dec 9 06:44:51 user.info kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.50.
Dec 9 06:44:51 user.info kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Dec 9 06:44:51 user.info kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Dec 9 06:44:51 user.warn kernel: hda: TSSTcorpDVD-ROM SH-D163B, ATAPI CD/DVD-ROM drive
Dec 9 06:44:51 user.warn kernel: hdc: TRANSCEND 032M, ATA DISK drive
Dec 9 06:44:51 user.warn kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 9 06:44:51 user.warn kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 9 06:44:51 user.warn kernel: hdc: attached ide-disk driver.
Dec 9 06:44:51 user.info kernel: hdc: 63488 sectors (33 MB) w/2KiB Cache, CHS=496/4/32
Dec 9 06:44:51 user.info kernel: Partition check:
Dec 9 06:44:51 user.info kernel: /dev/ide/host1/bus0/target0/lun0: p1 p2
Dec 9 06:44:51 user.info kernel: SCSI subsystem driver Revision: 1.00
Dec 9 06:44:51 user.info kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5
Dec 9 06:44:51 user.info kernel: Detecting Adaptec I2O RAID controllers.
Dec 9 06:44:51 user.info kernel: Red Hat/Adaptec aacraid driver (1.1-3 Aug 12 2007 09:05:44)
Dec 9 06:44:51 user.warn kernel: scsi: Detection failed (no card)
Dec 9 06:44:51 user.notice kernel: megaraid: v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)
Dec 9 06:44:51 user.warn kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.04
Dec 9 06:44:51 user.warn kernel: GDT-HA: Found 0 PCI Storage RAID Controllers
Dec 9 06:44:51 user.warn kernel: 3ware Storage Controller device driver for Linux v1.02.00.037.
Dec 9 06:44:51 user.warn kernel: 3w-xxxx: AEN drain failed for card 0.
Dec 9 06:44:51 user.notice kernel: scsi1 : Found a 3ware Storage Controller at 0xcc00, IRQ: 10, P-chip: 1.3
Dec 9 06:44:51 user.info kernel: scsi1 : 3ware Storage Controller
Dec 9 06:44:51 user.warn kernel: Vendor: 3ware Model: Logical Disk 0 Rev: 1.0
Dec 9 06:44:51 user.warn kernel: Type: Direct-Access ANSI SCSI revision: 00
Dec 9 06:44:51 user.debug kernel: libata version 1.20 loaded.
Dec 9 06:44:51 user.debug kernel: PCI(00:1f.2): version 1.05
Dec 9 06:44:51 user.warn kernel: ata: 0x1f0 IDE port busy
Dec 9 06:44:51 user.warn kernel: ata: 0x170 IDE port busy
Dec 9 06:44:51 user.warn kernel: nel 0, id 0, lun 0
Dec 9 06:44:51 user.warn kernel: SCSI device sda: 976771120 512-byte hdwr sectors (500107 MB)
Dec 9 06:44:51 user.info kernel: /dev/scsi/host1/bus0/target0/lun0: p1
Dec 9 06:44:51 user.info kernel: raw1394: /dev/raw1394 device initialized
Dec 9 06:44:51 user.info kernel: sbp2: $Rev: 1074 $ Ben Collins
Dec 9 06:44:51 user.err kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Dec 9 06:44:51 user.info kernel: usb.c: registered new driver usbdevfs
Dec 9 06:44:51 user.info kernel: usb.c: registered new driver hub
Dec 9 06:44:51 user.debug kernel: PCI: Setting latency timer of device 00:1d.7 to 64
Dec 9 06:44:51 user.info kernel: ehci_hcd 00:1d.7: PCI device 8086:265c
Dec 9 06:44:51 user.info kernel: ehci_hcd 00:1d.7: irq 9, pci mem f8815000
Dec 9 06:44:51 user.info kernel: usb.c: new USB bus registered, assigned bus number 1
Dec 9 06:44:51 user.info kernel: ehci_hcd 00:1d.7: enabled 64bit PCI DMA
Dec 9 06:44:51 user.debug kernel: PCI: cache line size of 128 is not supported by device 00:1d.7
Dec 9 06:44:51 user.info kernel: ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Dec 9 06:44:51 user.info kernel: hub.c: USB hub found
Dec 9 06:44:51 user.info kernel: hub.c: 8 ports detected
Dec 9 06:44:51 user.info kernel: host/uhci.c: USB Universal Host Controller Interface driver v1.1
Dec 9 06:44:51 user.debug kernel: PCI: Setting latency timer of device 00:1d.0 to 64
Dec 9 06:44:51 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe000, IRQ 9
Dec 9 06:44:51 user.info kernel: usb.c: new USB bus registered, assigned bus number 2
Dec 9 06:44:51 user.info kernel: hub.c: USB hub found
Dec 9 06:44:51 user.info kernel: hub.c: 2 ports detected
Dec 9 06:44:51 user.debug kernel: PCI: Setting latency timer of device 00:1d.1 to 64
Dec 9 06:44:51 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe400, IRQ 3
Dec 9 06:44:51 user.info kernel: usb.c: new USB bus registered, assigned bus number 3
Dec 9 06:44:51 user.info kernel: hub.c: USB hub found
Dec 9 06:44:51 user.info kernel: hub.c: 2 ports detected
Dec 9 06:44:51 user.debug kernel: PCI: Setting latency timer of device 00:1d.2 to 64
Dec 9 06:44:51 user.info kernel: host/uhci.c: USB UHCI at I/O 0xe800, IRQ 5
Dec 9 06:44:51 user.info kernel: usb.c: new USB bus registered, assigned bus number 4
Dec 9 06:44:51 user.info kernel: hub.c: USB hub found
Dec 9 06:44:51 user.info kernel: hub.c: 2 ports detected
Dec 9 06:44:51 user.debug kernel: PCI: Setting latency timer of device 00:1d.3 to 64
Dec 9 06:44:51 user.info kernel: host/uhci.c: USB UHCI at I/O 0xec00, IRQ 11
Dec 9 06:44:51 user.info kernel: usb.c: new USB bus registered, assigned bus number 5
Dec 9 06:44:51 user.info kernel: hub.c: USB hub found
Dec 9 06:44:51 user.info kernel: hub.c: 2 ports detected
Dec 9 06:44:51 user.info kernel: usb.c: registered new driver usbkbd
Dec 9 06:44:51 user.info kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Dec 9 06:44:51 user.info kernel: Initializing USB Mass Storage driver.
Dec 9 06:44:51 user.info kernel: usb.c: registered new driver usb-storage
Dec 9 06:44:51 user.info kernel: USB Mass Storage support registered.
Dec 9 06:44:51 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Dec 9 06:44:51 user.info kernel: IP Protocols: ICMP, UDP, TCP
Dec 9 06:44:51 user.info kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Dec 9 06:44:51 user.info kernel: TCP: Hash tables configured (established 262144 bind 65536)
Dec 9 06:44:51 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Dec 9 06:44:51 user.notice kernel: RAMDISK: NASLite file system found at block 0
Dec 9 06:44:51 user.warn kernel: <6>Freeing initrd memory: 1962k freed
Dec 9 06:44:51 user.warn kernel: VFS: Mounted root (ext2 filesystem).
Dec 9 06:44:51 user.info kernel: Mounted devfs on /dev
Dec 9 06:44:51 user.info kernel: Freeing unused kernel memory: 540k freed
Dec 9 06:44:51 user.err kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex
Dec 9 06:44:51 user.err kernel: ext3: No journal on filesystem on sd(8,1)
Dec 9 19:49:37 user.err kernel: e100: eth0 NIC Link is Down
Dec 9 19:49:49 user.err kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex
Dec 9 19:50:19 user.err kernel: e100: eth0 NIC Link is Down
Dec 9 19:50:21 user.err kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex
[list=][/list]


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 11, 2007 8:00 pm 
Offline
Site Admin

Joined: Tue Jul 13, 2004 4:11 pm
Posts: 1771
Location: Server Elements
NASLite-2 itself has no facilities to articulate ACPI other than the kernel. NASLite-2 simply examines the /proc for availability of supported ACPI items and exports those to the system status page. That is not to say that your board does not have the functionality, but rather that the kernel as it stands is not capable of identifying and rendering those in the /proc.

Usually the reason can be traced to the associated DSDT which in turn is device/vendor-specific. It is difficult to provide every variant in the confines of the NASLite OS, so only the most common items are globally supported. In this case the power button.

Otherwise, your syslog looks fine.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 11, 2007 8:25 pm 
Offline

Joined: Sat Mar 03, 2007 6:25 pm
Posts: 294
Location: Delft NL / Brooklyn NY
Thanks, Tony.

It's a little beyond my comprehension, but in due time I know I will master the /proc, DSDT, the whole shabang.

The NASLite file server is working absolutely fine, fast and to my surprise, rather quiet.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 18, 2007 2:02 pm 
Offline

Joined: Sat Nov 19, 2005 6:39 pm
Posts: 633
Location: California
Also be aware that Intel boards do a lot of "tricky" (proprietary) stuff. For Windoze Intel provides their own "health monitoring" software (which is very good by-the-way, I think it's called "Intel Active Monitor"), but I've had trouble with some 8xx series boards (845, 875) getting good reliable and stable info when using third-party utilities MBM (Motherboard Monitor) or SpeedFan. This may be an indication that the equivalent Linux kernel could have just as much trouble with that Intel hardware.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 18, 2007 6:28 pm 
Offline

Joined: Sat Mar 03, 2007 6:25 pm
Posts: 294
Location: Delft NL / Brooklyn NY
Thank you Georg, you probably touched the weak spot of Intel boards. They're my favorite with Windows, because they just do the job in a very reliable way. And yes, their Active Monitor is a delightful tool.

I guess fan control is a bridge too far for NASLite.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group