Hi,
Looking at the Hardware Ref manual the chipsset for the card is supported.
Hardware REF
Silicon Image, Inc.
Silicon Image SATA Controller Driver
SiI 3114 [SATALink/SATARaid] Serial ATA
Controller
Card Specs
PCI Specification Revision 2.3 compliant
Serial ATA Specification Revision 1.0 compliant
Compliant with programming interface for Bus Master IDE Controller, Rev 1.0
Silicon Image SIL 3114 host controller chip
Compliant with Serial ATA 1.0 specification
Support 66Mhz PCI with 32-bit data
Support programmable and EEPROM, FLASH & EPROM loadable PCI class mode
Support ATAPI devices: CD-ROM, DVD-ROM, etc
Integrated SATA Transport, Link Logic & PHY layer
48-Bit sector addressing
Virtual DMA
RAID function (Optional)
Supports software RAID 0 (striped), RAID 1 (mirror), and RAID 0+1
Supports co-exist RAID set and Non-RAID HDD
Allows HDDs with different sizes to be configured in a RAID set
|