Joined: Wed Oct 26, 2005 8:42 am Posts: 135 Location: Arkansas, USA
|
Power off & re-booting didn't work. Now remember this baby came up and was recognized the first time. Here is what I stumbled on as a "fix"; MachSpeed P4M800 MoBo ... in Bios on the PnP / PCI Configurations page ... I changed Resources Control = Manual (from Auto), now all IRQ Resources show "Assigned to PCI Device". Save - Booted - All is well. I have no idea why. Nor do I understand why it worked the first time without a problem. It was only after it was formatted (I guess) that the "stuck on DMI pool" occured.
|
|