NASLite Network Attached Storage

I have the following error report

Jun 29 12:30:55 user.warn kernel: sdc : READ CAPACITY failed.
Jun 29 12:30:55 user.warn kernel: sdc : status = 1, message = 00, host = 0, driver = 08
Jun 29 12:30:55 user.warn kernel: Info fld=0x0, Current sd00:00: sns = f0 2
Jun 29 12:30:55 user.warn kernel: ASC=3a ASCQ= 0
Jun 29 12:30:55 user.warn kernel: Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x40 0x3a 0x00 0x40 0x00 0x00 0x00
Jun 29 12:30:55 user.warn kernel: sdc : block size assumed to be 512 bytes, disk size 1GB.
Jun 29 12:30:55 user.warn kernel: sdc: test WP failed, assume Write Enabled
Jun 29 12:30:55 user.info kernel: /dev/scsi/host6/bus0/target0/lun0: I/O error: dev 08:20, sector 0
Jun 29 12:30:55 user.warn kernel: I/O error: dev 08:20, sector 0

How can i identify which drive is the troublesome item as i have 5 drives in this machine

steve

Take this content "scsi/host6/bus0/target0/lun0" from the following line: Jun 29 12:30:55 user.info kernel: /dev/scsi/host6/bus0/target0/lun0: I/O error: dev 08:20, sector 0 and compare it to the Disk-X parameters in the admin page. In other words, get into the admin page, enter Option 3 and check for the above.

My guess is that's your 1G USB drive that you boot from.

Hope that helps.