NASLite Network Attached Storage • View topic

View unanswered posts | View active topics

Board index » v1.x NASLite M2 » NASLite-M2

All times are UTC - 5 hours [ DST ]

New upgrade and IRQ question

Page 1 of 4

[ 49 posts ]

Go to page 1, 2, 3, 4 Next

Previous topic | Next topic

Author

Message

markle123

Post subject: New upgrade and IRQ question

Posted: Wed Nov 06, 2013 11:17 pm

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

Hello,

Firstly, thank you for such an easy to use and helpful product.

I just received an email regarding a new version. I actually upgraded only two months ago. I upgraded because my system has a problem with IRQ's and I was hopeful it would solve them, alas not. I am hoping to find out if the new upgrade will resolve these issues I am having before I upgrade again.

To explain what is happening before the upgrade; the computer boots find, everything works no problems. Then after a period of around 24-28 hours (sometimes during boot up if discs are being scanned) I get my first IRQ (usually 16), this results in reduced transfer speeds from 10mbps to 1mbps, then if I leave the system longer, say 72+ after boot up I am guaranteed to get an additional 2 IRQ (usually 18 & 19) and transfer speeds drop from 1mbps to around 25kbps. If I remember to reboot the system everyday I can resolve this, however sometimes I forget and this impacts on software that relies upon the NAS working at 10mbps, i.e. back up software.

After the upgrade I rarely get IRQ 18 & 19 show up but eventually transfer speeds still drop from 1mbps to around 25kbps.

Look forward to your hearing your thoughts on this.

Thank you, Mark.

Most recent System Message Log (sorry I don't have one with IRQ 18 & 19 yet, but I'll keep watching and if I see it I'll post it if it helps in the diagnosis)

System Message Log: (as attachment)

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Wed Nov 06, 2013 11:18 pm

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

Looks like the attachment didn't work?

Dec 5 07:57:13 [3] klogd started: BusyBox v1.12.1 (2009-11-19 21:21:30 UTC)
Dec 5 07:57:13 [3] Linux version 2.6.30.3-64-CORE3 (root@build) (gcc version 4.3.3 (GCC) ) #1 SMP Sat Aug 14 22:27:41 EDT 2010
Dec 5 07:57:13 [2] Command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
Dec 5 07:57:13 [2] KERNEL supported cpus:
Dec 5 07:57:13 [2] Intel GenuineIntel
Dec 5 07:57:13 [2] AMD AuthenticAMD
Dec 5 07:57:13 [2] Centaur CentaurHauls
Dec 5 07:57:13 [2] BIOS-provided physical RAM map:
Dec 5 07:57:13 [2] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
Dec 5 07:57:13 [2] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Dec 5 07:57:13 [2] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
Dec 5 07:57:13 [2] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 0000000040200000 - 000000007c4d4000 (usable)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c4d4000 - 000000007c51a000 (ACPI NVS)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c51a000 - 000000007c522000 (ACPI data)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c522000 - 000000007c5f7000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c5f7000 - 000000007c5f9000 (usable)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c5f9000 - 000000007c609000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c609000 - 000000007c616000 (ACPI NVS)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c616000 - 000000007c63e000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c63e000 - 000000007c681000 (ACPI NVS)
Dec 5 07:57:13 [2] BIOS-e820: 000000007c681000 - 000000007c800000 (usable)
Dec 5 07:57:13 [2] BIOS-e820: 000000007d000000 - 000000007f200000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Dec 5 07:57:13 [2] BIOS-e820: 0000000100000000 - 0000000100600000 (usable)
Dec 5 07:57:13 [2] DMI 2.7 present.
Dec 5 07:57:13 [3] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Dec 5 07:57:13 [1] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Dec 5 07:57:13 [2] last_pfn = 0x100600 max_arch_pfn = 0x100000000
Dec 5 07:57:13 [2] last_pfn = 0x7c800 max_arch_pfn = 0x100000000
Dec 5 07:57:13 [2] init_memory_mapping: 0000000000000000-000000007c800000
Dec 5 07:57:13 [1] 0000000000 - 007c800000 page 2M
Dec 5 07:57:13 [1] kernel direct mapping tables up to 7c800000 @ 10000-13000
Dec 5 07:57:13 [2] init_memory_mapping: 0000000100000000-0000000100600000
Dec 5 07:57:13 [1] 0100000000 - 0100600000 page 2M
Dec 5 07:57:13 [1] kernel direct mapping tables up to 100600000 @ 11000-17000
Dec 5 07:57:13 [2] RAMDISK: 1f754000 - 1fffe27c
Dec 5 07:57:13 [4] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
Dec 5 07:57:13 [4] ACPI: XSDT 000000007c51a068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 5 07:57:13 [4] ACPI: FACP 000000007c5213c8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
Dec 5 07:57:13 [4] ACPI: DSDT 000000007c51a150 07271 (v02 ALASKA A M I 00000015 INTL 20051117)
Dec 5 07:57:13 [4] ACPI: FACS 000000007c60df80 00040
Dec 5 07:57:13 [4] ACPI: APIC 000000007c5214c0 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
Dec 5 07:57:13 [4] ACPI: SSDT 000000007c521528 00098 (v01 AMICPU PROC 00000001 MSFT 03000001)
Dec 5 07:57:13 [4] ACPI: MCFG 000000007c5215c0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
Dec 5 07:57:13 [4] ACPI: HPET 000000007c521600 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
Dec 5 07:57:13 [4] ACPI: ASF! 000000007c521638 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
Dec 5 07:57:13 [1] ACPI: Local APIC address 0xfee00000
Dec 5 07:57:13 [2] (8 early reservations) ==> bootmem [0000000000 - 0100600000]
Dec 5 07:57:13 [2] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Dec 5 07:57:13 [2] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
Dec 5 07:57:13 [2] #2 [0000200000 - 000057dc8c] TEXT DATA BSS ==> [0000200000 - 000057dc8c]
Dec 5 07:57:13 [2] #3 [001f754000 - 001fffe27c] RAMDISK ==> [001f754000 - 001fffe27c]
Dec 5 07:57:13 [2] #4 [0000097c00 - 0000100000] BIOS reserved ==> [0000097c00 - 0000100000]
Dec 5 07:57:13 [2] #5 [000057e000 - 000057e1ee] BRK ==> [000057e000 - 000057e1ee]
Dec 5 07:57:13 [2] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
Dec 5 07:57:13 [2] #7 [0000011000 - 0000012000] PGTABLE ==> [0000011000 - 0000012000]
Dec 5 07:57:13 [2] found SMP MP-table at [ffff8800000fcde0] fcde0
Dec 5 07:57:13 [1] [ffffe20000000000-ffffe200039fffff] PMD -> [ffff88002c200000-ffff88002fbfffff] on node 0
Dec 5 07:57:13 [4] Zone PFN ranges:
Dec 5 07:57:13 [4] DMA 0x00000010 -> 0x00001000
Dec 5 07:57:13 [4] DMA32 0x00001000 -> 0x00100000
Dec 5 07:57:13 [4] Normal 0x00100000 -> 0x00100600
Dec 5 07:57:13 [4] Movable zone start PFN for each node
Dec 5 07:57:13 [4] early_node_map[7] active PFN ranges
Dec 5 07:57:13 [4] 0: 0x00000
Dec 5 07:57:13 [2] 010 -> 0x00000097
Dec 5 07:57:13 [4] 0: 0x00000100 -> 0x00020000
Dec 5 07:57:13 [4] 0: 0x00020200 -> 0x00040000
Dec 5 07:57:13 [4] 0: 0x00040200 -> 0x0007c4d4
Dec 5 07:57:13 [4] 0: 0x0007c5f7 -> 0x0007c5f9
Dec 5 07:57:13 [4] 0: 0x0007c681 -> 0x0007c800
Dec 5 07:57:13 [4] 0: 0x00100000 -> 0x00100600
Dec 5 07:57:13 [1] On node 0 totalpages: 509916
Dec 5 07:57:13 [1] DMA zone: 56 pages used for memmap
Dec 5 07:57:13 [1] DMA zone: 1002 pages reserved
Dec 5 07:57:13 [1] DMA zone: 2917 pages, LIFO batch:0
Dec 5 07:57:13 [1] DMA32 zone: 14280 pages used for memmap
Dec 5 07:57:13 [1] DMA32 zone: 490125 pages, LIFO batch:31
Dec 5 07:57:13 [1] Normal zone: 21 pages used for memmap
Dec 5 07:57:13 [1] Normal zone: 1515 pages, LIFO batch:0
Dec 5 07:57:13 [2] ACPI: PM-Timer IO Port: 0x408
Dec 5 07:57:13 [1] ACPI: Local APIC address 0xfee00000
Dec 5 07:57:13 [2] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Dec 5 07:57:13 [2] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Dec 5 07:57:13 [2] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Dec 5 07:57:13 [2] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Dec 5 07:57:13 [2] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-23
Dec 5 07:57:13 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec 5 07:57:13 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Dec 5 07:57:13 [1] ACPI: IRQ0 used by override.
Dec 5 07:57:13 [1] ACPI: IRQ2 used by override.
Dec 5 07:57:13 [1] ACPI: IRQ9 used by override.
Dec 5 07:57:13 [2] Using ACPI (MADT) for SMP configuration information
Dec 5 07:57:13 [2] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Dec 5 07:57:13 [2] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Dec 5 07:57:13 [1] nr_irqs_gsi: 24
Dec 5 07:57:13 [2] Allocating PCI resources starting at 80000000 (gap: 7f200000:7fb1c000)
Dec 5 07:57:13 [2] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
Dec 5 07:57:13 [2] PERCPU: Embedded 24 pages at ffff88002c01d000, static data 68896 bytes
Dec 5 07:57:13 [4] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 494557
Dec 5 07:57:13 [3] Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
Dec 5 07:57:13 [2] Initializing CPU#0
Dec 5 07:57:13 [2] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Dec 5 07:57:13 [2] NR_IRQS:384
Dec 5 07:57:13 [4] PID hash table entries: 4096 (order: 12, 32768 bytes)
Dec 5 07:57:13 [2] Extended CMOS year: 2000
Dec 5 07:57:13 [4] Fast TSC calibration using PIT
Dec 5 07:57:13 [4] Detected 2394.548 MHz processor.
Dec 5 07:57:13 [4] Console: colour VGA+ 80x25
Dec 5 07:57:13 [2] console [tty0] enabled
Dec 5 07:57:13 [2] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Dec 5 07:57:13 [2] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 5 07:57:13 [2] Checking aperture.
Dec 5 07:57:13 [2] No AGP bridge found
Dec 5 07:57:13 [2] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Dec 5 07:57:13 [2] Placing 64MB software IO TLB between ffff880024000000 - ffff880028000000
Dec 5 07:57:13 [2] software IO TLB at phys 0x24000000 - 0x28000000
Dec 5 07:57:13 [2] Memory: 1897744k/4200448k available (2004k kernel code, 2160784k absent, 141240k reserved, 846k data, 324k init)
Dec 5 07:57:13 [2] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 5 07:57:13 [1] hpet clockevent registered
Dec 5 07:57:13 [2] Calibrating delay loop (skipped), value calculated using timer frequency 4789.09 BogoMIPS (lpj=9578192)
Dec 5 07:57:13 [4] Mount-cache hash table entries: 256
Dec 5 07:57:13 [2] CPU: Physical Processor ID: 0
Dec 5 07:57:13 [2] CPU: Processor Core ID: 0
Dec 5 07:57:13 [2] CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 5 07:57:13 [2] CPU: L2 cache: 256K
Dec 5 07:57:13 [2] CPU: L3 cache: 2048K
Dec 5 07:57:13 [2] using mwait in idle threads.
Dec 5 07:57:13 [2] Freeing SMP alternatives: 23k freed
Dec 5 07:57:13 [2] ACPI: Core revision 20090320
Dec 5 07:57:13 [2] Setting APIC routing to flat
Dec 5 07:57:13 [2] CPU0: Intel(R) Celeron(R) CPU G530 @ 2.40GHz stepping 07
Dec 5 07:57:13 [2] Booting processor 1 APIC 0x2 ip 0x6000
Dec 5 07:57:13 [2] Initializing CPU#1
Dec 5 07:57:13 [2] Calibrating delay using timer specific routine 4788.90 BogoMIPS (lpj=9577816)
Dec 5 07:57:13 [2] CPU: Physical Processor ID: 0
Dec 5 07:57:13 [2] CPU: Processor Core ID: 1
Dec 5 07:57:13 [2] CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 5 07:57:13 [2] CPU: L2 cache: 256K
Dec 5 07:57:13 [2] CPU: L3 cache: 2048K
Dec 5 07:57:13 [2] CPU1: Intel(R) Celeron(R) CPU G530 @ 2.40GHz stepping 07
Dec 5 07:57:13 [2] Skipping synchronization checks as TSC is reliable.
Dec 5 07:57:13 [2] Brought up 2 CPUs
Dec 5 07:57:13 [2] Total of 2 processors activated (9578.00 BogoMIPS).
Dec 5 07:57:13 [2] net_namespace: 560 bytes
Dec 5 07:57:13 [2] NET: Registered protocol family 16
Dec 5 07:57:13 [2] ACPI: bus type pci registered
Dec 5 07:57:13 [3] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Dec 5 07:57:13 [2] PCI: Not using MMCONFIG.
Dec 5 07:57:13 [2] PCI: Using configuration type 1 for base access
Dec 5 07:57:13 [4] bio: create slab at 0
Dec 5 07:57:13 [1] ACPI: EC: Look up EC in DSDT
Dec 5 07:57:13 [2] ACPI: Interpreter enabled
Dec 5 07:57:13 [2] ACPI: (supports S0 S5)
Dec 5 07:57:13 [2] ACPI: Using IOAPIC for interrupt routing
Dec 5 07:57:13 [3] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Dec 5 07:57:13 [3] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Dec 5 07:57:13 [2] PCI:
Dec 5 07:57:13 [2] Using MMCONFIG at e0000000 - efffffff
Dec 5 07:57:13 [3] ACPI: BIOS _OSI(Linux) query ignored
Dec 5 07:57:13 [2] ACPI: No dock devices found.
Dec 5 07:57:13 [2] ACPI: PCI Root Bridge [PCI0] (0000:00)
Dec 5 07:57:13 [1] pci 0000:00:02.0: reg 10 64bit mmio: [0xfb400000-0xfb7fffff]
Dec 5 07:57:13 [1] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
Dec 5 07:57:13 [1] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
Dec 5 07:57:13 [1] pci 0000:00:16.0: reg 10 64bit mmio: [0xfbe04000-0xfbe0400f]
Dec 5 07:57:13 [2] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:00:16.0: PME# disabled
Dec 5 07:57:13 [1] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbe03000-0xfbe033ff]
Dec 5 07:57:13 [2] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:00:1a.0: PME# disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:00:1c.0: PME# disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:00:1c.2: PME# disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:00:1c.5: PME# disabled
Dec 5 07:57:13 [1] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbe02000-0xfbe023ff]
Dec 5 07:57:13 [2] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:00:1d.0: PME# disabled
Dec 5 07:57:13 [1] pci 0000:00:1f.2: reg 10 io port: [0xf0b0-0xf0b7]
Dec 5 07:57:13 [1] pci 0000:00:1f.2: reg 14 io port: [0xf0a0-0xf0a3]
Dec 5 07:57:13 [1] pci 0000:00:1f.2: reg 18 io port: [0xf090-0xf097]
Dec 5 07:57:13 [1] pci 0000:00:1f.2: reg 1c io port: [0xf080-0xf083]
Dec 5 07:57:13 [1] pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
Dec 5 07:57:13 [1] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbe01000-0xfbe017ff]
Dec 5 07:57:13 [2] pci 0000:00:1f.2: PME# supported from D3hot
Dec 5 07:57:13 [2] pci 0000:00:1f.2: PME# disabled
Dec 5 07:57:13 [1] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbe00000-0xfbe000ff]
Dec 5 07:57:13 [1] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
Dec 5 07:57:13 [1] pci 0000:02:00.0: supports D1 D2
Dec 5 07:57:13 [2] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:02:00.0: PME# disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.2: transparent bridge
Dec 5 07:57:13 [1] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff]
Dec 5 07:57:13 [1] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb800000-0xfbcfffff]
Dec 5 07:57:13 [1] pci 0000:03:00.0: reg 10 32bit mmio: [0xfbc20000-0xfbc200ff]
Dec 5 07:57:13 [1] pci 0000:03:00.0: reg 14 io port: [0xe200-0xe2ff]
Dec 5 07:57:13 [1] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbc00000-0xfbc1ffff]
Dec 5 07:57:13 [1] pci 0000:03:00.0: supports D1 D2
Dec 5 07:57:13 [2] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
Dec 5 07:57:13 [2] pci 0000:03:00.0: PME# disabled
Dec 5 07:57:13 [1] pci 0000:03:01.0: reg 10 64bit mmio: [0xfb900000-0xfb9fffff]
Dec 5 07:57:13 [1] pci 0000:03:01.0: reg 18 io port: [0xe100-0xe1ff]
Dec 5 07:57:13 [1] pci 0000:03:02.0: reg 10 64bit mmio: [0xfb800000-0xfb8fffff]
Dec 5 07:57:13 [1] pci 0000:03:02.0: reg 18 io port: [0xe000-0xe0ff]
Dec 5 07:57:13 [1] pci 0000:02:00.0: bridge io port: [0xe000-0xefff]
Dec 5 07:57:13 [1] pci 0000:02:00.0: bridge 32bit mmio: [0xfb800000-0xfbcfffff]
Dec 5 07:57:13 [1] pci 0000:04:00.0: reg 10 io port: [0xd050-0xd057]
Dec 5 07:57:13 [1] pci 0000:04:00.0: reg 14 io port: [0xd040-0xd043]
Dec 5 07:57:13 [1] pci 0000:04:00.0: reg 18 io port: [0xd030-0xd037]
Dec 5 07:57:13 [1] pci 0000:04:00.0: reg 1c io port: [0xd020-0xd023]
Dec 5 07:57:13 [1] pci 0000:04:00.0: reg 20 io port: [0xd000-0xd01f]
Dec 5 07:57:13 [1] pci 0000:04:00.0: reg 24 32bit mmio: [0xfbd00000-0xfbd001ff]
Dec 5 07:57:13 [1] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
Dec 5 07:57:13 [1] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
Dec 5 07:57:13 [1] pci_bus 0000:00: on NUMA node 0
Dec 5 07:57:13 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 5 07:57:13 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Dec 5 07:57:13 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
Dec 5 07:57:13 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Dec 5 07:57:13 [2] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Dec 5 07:57:13 [2] PCI: Using ACPI for IRQ routing
Dec 5 07:57:13 [1]
Dec 5 07:57:13 [1] printing PIC contents
Dec 5 07:57:13 [1] . PIC IMR: ffff
Dec 5 07:57:13 [1] . PIC IRR: 0ca8
Dec 5 07:57:13 [1] . PIC ISR: 0000
Dec 5 07:57:13 [1] . PIC ELCR: 0ca8
Dec 5 07:57:13 [4]
Dec 5 07:57:13 [1] printing local APIC contents on CPU#0/0:
Dec 5 07:57:13 [2] . APIC ID: 00000000 (0)
Dec 5 07:57:13 [2] . APIC VERSION: 01060015
Dec 5 07:57:13 [1] . API
Dec 5 07:57:13 [2] C TASKPRI: 00000000 (00)
Dec 5 07:57:13 [1] . APIC PROCPRI: 00000000
Dec 5 07:57:13 [1] . APIC LDR: 01000000
Dec 5 07:57:13 [1] . APIC DFR: ffffffff
Dec 5 07:57:13 [1] . APIC SPIV: 000001ff
Dec 5 07:57:13 [1] . APIC ISR field:
Dec 5 07:57:13 [1] 0123456789abcdef0123456789abcdef
Dec 5 07:57:13 [1] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [1] . APIC TMR field:
Dec 5 07:57:13 [1] 0123456789abcdef0123456789abcdef
Dec 5 07:57:13 [1] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [1] . APIC IRR field:
Dec 5 07:57:13 [1] 0123456789abcdef0123456789abcdef
Dec 5 07:57:13 [1] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [1] . APIC ESR: 00000000
Dec 5 07:57:13 [1] . APIC ICR: 000008fb
Dec 5 07:57:13 [1] . APIC ICR2: 02000000
Dec 5 07:57:13 [1] . APIC LVTT: 000200ef
Dec 5 07:57:13 [1] . APIC LVTPC: 00010000
Dec 5 07:57:13 [1] . APIC LVT0: 00010700
Dec 5 07:57:13 [1] . APIC LVT1: 00000400
Dec 5 07:57:13 [1] . APIC LVTERR: 000000fe
Dec 5 07:57:13 [1] . APIC TMICT: 0000616e
Dec 5 07:57:13 [1] . APIC TMCCT: 00005cf9
Dec 5 07:57:13 [1] . APIC TDCR: 00000003
Dec 5 07:57:13 [4]
Dec 5 07:57:13 [4]
Dec 5 07:57:13 [1] printing local APIC contents on CPU#1/2:
Dec 5 07:57:13 [2] . APIC ID: 02000000 (2)
Dec 5 07:57:13 [2] . APIC VERSION: 01060015
Dec 5 07:57:13 [1] . APIC TASKPRI: 00000000 (00)
Dec 5 07:57:13 [1] . APIC PROCPRI: 00000000
Dec 5 07:57:13 [1] . APIC LDR: 02000000
Dec 5 07:57:13 [1] . APIC DFR: ffffffff
Dec 5 07:57:13 [1] . APIC SPIV: 000001ff
Dec 5 07:57:13 [1] . APIC ISR field:
Dec 5 07:57:13 [1] 0123456789abcdef0123456789abcdef
Dec 5 07:57:13 [1] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [1] . APIC TMR field:
Dec 5 07:57:13 [1] 0123456789abcdef0123456789abcdef
Dec 5 07:57:13 [1] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [1] . APIC IRR field:
Dec 5 07:57:13 [1] 0123456789abcdef0123456789abcdef
Dec 5 07:57:13 [1] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [4] 00000000000000000000000000000000
Dec 5 07:57:13 [1] . APIC ESR: 00000000
Dec 5 07:57:13 [1] . APIC ICR: 00000000
Dec 5 07:57:13 [1] . APIC ICR2: 00000000
Dec 5 07:57:13 [1] . APIC LVTT: 000200ef
Dec 5 07:57:13 [1] . APIC LVTPC: 00010000
Dec 5 07:57:13 [1] . APIC LVT0: 00010700
Dec 5 07:57:13 [1] . APIC LVT1: 00010400
Dec 5 07:57:13 [1] . APIC LVTERR: 000000fe
Dec 5 07:57:13 [1] . APIC TMICT: 0000616e
Dec 5 07:57:13 [1] . APIC TMCCT: 00005a1a
Dec 5 07:57:13 [1] . APIC TDCR: 00000003
Dec 5 07:57:13 [4]
Dec 5 07:57:13 [1] number of MP IRQ sources: 15.
Dec 5 07:57:13 [1] number of IO-APIC #0 registers: 24.
Dec 5 07:57:13 [2] testing the IO APIC.
Dec 5 07:57:13 [4]
Dec 5 07:57:13 [1] IO APIC #0
Dec 5 07:57:13 [1] register #00: 00000000
Dec 5 07:57:13 [1] . : physical APIC id: 00
Dec 5 07:57:13 [1] . : Delivery Type: 0
Dec 5 07:57:13 [1] . : LTS : 0
Dec 5 07:57:13 [1] register #01: 00170020
Dec 5 07:57:13 [1] . : max redirection entries: 0017
Dec 5 07:57:13 [1] . : PRQ implemented: 0
Dec 5 07:57:13 [1] . : IO APIC version: 0020
Dec 5 07:57:13 [1] IRQ redirection table:
Dec 5 07:57:13 [1] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
Dec 5 07:57:13 [1] 00 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 01 003 0 0 0 0 0 1 1 31
Dec 5 07:57:13 [1] 02 003 0 0 0 0 0 1 1 30
Dec 5 07:57:13 [1] 03 003 0 0 0 0 0 1 1 33
Dec 5 07:57:13 [1] 04 003 0 0 0 0 0 1 1 34
Dec 5 07:57:13 [1] 05 003 0 0 0 0 0 1 1 35
Dec 5 07:57:13 [1] 06 003 0 0 0 0 0 1 1 36
Dec 5 07:57:13 [1] 07 003 0 0 0 0 0 1 1 37
Dec 5 07:57:13 [1] 08 003 0 0 0 0 0 1 1 38
Dec 5 07:57:13 [1] 09 003 0 1 0 0 0 1 1 39
Dec 5 07:57:13 [1] 0a 003 0 0 0 0 0
Dec 5 07:57:13 [2] 1 1 3A
Dec 5 07:57:13 [1] 0b 003 0 0 0 0 0 1 1 3B
Dec 5 07:57:13 [1] 0c 003 0 0 0 0 0 1 1 3C
Dec 5 07:57:13 [1] 0d 003 0 0 0 0 0 1 1 3D
Dec 5 07:57:13 [1] 0e 003 0 0 0 0 0 1 1 3E
Dec 5 07:57:13 [1] 0f 003 0 0 0 0 0 1 1 3F
Dec 5 07:57:13 [1] 10 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 11 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 12 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 13 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 14 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 15 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 16 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] 17 000 1 0 0 0 0 0 0 00
Dec 5 07:57:13 [1] IRQ to pin mappings:
Dec 5 07:57:13 [1] IRQ0 -> 0:2
Dec 5 07:57:13 [1] IRQ1 -> 0:1
Dec 5 07:57:13 [1] IRQ3 -> 0:3
Dec 5 07:57:13 [1] IRQ4 -> 0:4
Dec 5 07:57:13 [1] IRQ5 -> 0:5
Dec 5 07:57:13 [1] IRQ6 -> 0:6
Dec 5 07:57:13 [1] IRQ7 -> 0:7
Dec 5 07:57:13 [1] IRQ8 -> 0:8
Dec 5 07:57:13 [1] IRQ9 -> 0:9
Dec 5 07:57:13 [1] IRQ10 -> 0:10
Dec 5 07:57:13 [1] IRQ11 -> 0:11
Dec 5 07:57:13 [1] IRQ12 -> 0:12
Dec 5 07:57:13 [1] IRQ13 -> 0:13
Dec 5 07:57:13 [1] IRQ14 -> 0:14
Dec 5 07:57:13 [1] IRQ15 -> 0:15
Dec 5 07:57:13 [2] done.
Dec 5 07:57:13 [2] pnp: PnP ACPI init
Dec 5 07:57:13 [2] ACPI: bus type pnp registered
Dec 5 07:57:13 [2] pnp: PnP ACPI: found 13 devices
Dec 5 07:57:13 [2] ACPI: ACPI bus type pnp unregistered
Dec 5 07:57:13 [2] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
Dec 5 07:57:13 [2] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Dec 5 07:57:13 [2] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
Dec 5 07:57:13 [2] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
Dec 5 07:57:13 [2] system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved
Dec 5 07:57:13 [2] system 00:02: ioport range 0xa00-0xa1f has been reserved
Dec 5 07:57:13 [2] system 00:02: ioport range 0xa30-0xa3f has been reserved
Dec 5 07:57:13 [2] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Dec 5 07:57:13 [2] system 00:0a: ioport range 0x400-0x453 has been reserved
Dec 5 07:57:13 [2] system 00:0a: ioport range 0x458-0x47f has been reserved
Dec 5 07:57:13 [2] system 00:0a: ioport range 0x1180-0x119f has been reserved
Dec 5 07:57:13 [2] system 00:0a: ioport range 0x500-0x57f has been reserved
Dec 5 07:57:13 [2] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
Dec 5 07:57:13 [2] system 00:0a: iomem range 0xfec00000-0xfecfffff has been reserved
Dec 5 07:57:13 [2] system 00:0a: iomem range 0xfed08000-0xfed08fff has been reserved
Dec 5 07:57:13 [2] system 00:0a: iomem range 0xff000000-0xffffffff has been reserved
Dec 5 07:57:13 [2] system 00:0b: ioport range 0x454-0x457 has been reserved
Dec 5 07:57:13 [2] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Dec 5 07:57:13 [2] pci 0000:00:1c.0: IO window: disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.0: MEM window: disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.0: PREFETCH window: disabled
Dec 5 07:57:13 [2] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
Dec 5 07:57:13 [2] pci 0000:02:00.0: IO window: 0xe000-0xefff
Dec 5 07:57:13 [2] pci 0000:02:00.0: MEM window: 0xfb800000-0xfbcfffff
Dec 5 07:57:13 [2] pci 0000:02:00.0: PREFETCH window: disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
Dec 5 07:57:13 [2] pci 0000:00:1c.2: IO window: 0xe000-0xefff
Dec 5 07:57:13 [2] pci 0000:00:1c.2: MEM window: 0xfb800000-0xfbcfffff
Dec 5 07:57:13 [2] pci 0000:00:1c.2: PREFETCH window: disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
Dec 5 07:57:13 [2] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
Dec 5 07:57:13 [2] pci 0000:00:1c.5: MEM window: 0xfbd00000-0xfbdfffff
Dec 5 07:57:13 [2] pci 0000:00:1c.5: PREFETCH window: disabled
Dec 5 07:57:13 [2] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec 5 07:57:13 [1] pci 0000:00:1c.0: setting latency timer to 64
Dec 5 07:57:13 [2] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec 5 07:57:13 [1] pci 0000:00:1c.2: setting latency timer to 64
Dec 5 07:57:13 [2] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Dec 5 07:57:13 [1] pci 0000:02:00.0: setting latency timer to 64
Dec 5 07:57:13 [2] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Dec 5 07:57:13 [1] pci 0000:00:1c.5: setting latency timer to 64
Dec 5 07:57:13 [1] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Dec 5 07:57:13 [1] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
Dec 5 07:57:13 [1] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
Dec 5 07:57:13 [1] pci_bus 0000:02: resource 1 mem: [0xfb800000-0xfbcfffff]
Dec 5 07:57:13 [1] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
Dec 5 07:57:13 [1] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
Dec 5 07:57:13 [1] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
Dec 5 07:57:13 [1] pci_bus 0000:03: resource 1 mem: [0xfb800000-0xfbcfffff]
Dec 5 07:57:13 [1] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
Dec 5 07:57:13 [1] pci_bus 0000:04: resource 1 mem: [0xfbd00000-0xfbdfffff]
Dec 5 07:57:13 [2] NET: Registered protocol family 2
Dec 5 07:57:13 [2] IP route cache hash table entries: 65536 (order: 7, 5
Dec 5 07:57:13 [2] 24288 bytes)
Dec 5 07:57:13 [2] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Dec 5 07:57:13 [2] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Dec 5 07:57:13 [2] TCP: Hash tables configured (established 262144 bind 65536)
Dec 5 07:57:13 [2] TCP reno registered
Dec 5 07:57:13 [2] NET: Registered protocol family 1
Dec 5 07:57:13 [2] Trying to unpack rootfs image as initramfs.
Dec 5 07:57:13 [2] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Dec 5 07:57:13 [2] Freeing initrd memory: 8872k freed
Dec 5 07:57:13 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Dec 5 07:57:13 [2] msgmni has been set to 3725
Dec 5 07:57:13 [2] io scheduler noop registered (default)
Dec 5 07:57:13 [1] pci 0000:00:02.0: Boot video device
Dec 5 07:57:13 [1] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Dec 5 07:57:13 [1] pcieport-driver 0000:00:1c.5: setting latency timer to 64
Dec 5 07:57:13 [2] Linux agpgart interface v0.103
Dec 5 07:57:13 [2] brd: module loaded
Dec 5 07:57:13 [2] loop: module loaded
Dec 5 07:57:13 [2] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Dec 5 07:57:13 [2] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 5 07:57:13 [2] serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 5 07:57:13 [2] mice: PS/2 mouse device common for all mice
Dec 5 07:57:13 [2] cpuidle: using governor ladder
Dec 5 07:57:13 [2] TCP cubic registered
Dec 5 07:57:13 [2] RPC: Registered udp transport module.
Dec 5 07:57:13 [2] RPC: Registered tcp transport module.
Dec 5 07:57:13 [2] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Dec 5 07:57:13 [3] RAMDISK: CORE3 root image found at block 0
Dec 5 07:57:13 [4] EXT2-fs warning: checktime reached, running e2fsck is recommended
Dec 5 07:57:13 [4] VFS: Mounted root (ext2 filesystem) on device 1:0.
Dec 5 07:57:13 [2] Freeing unused kernel memory: 324k freed
Dec 5 07:57:16 [4] floppy0: no floppy controllers found
Dec 5 07:57:17 [2] rtc_cmos 00:06: RTC can wake from S4
Dec 5 07:57:17 [2] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Dec 5 07:57:17 [2] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Dec 5 07:57:18 [2] input: PC Speaker as /devices/platform/pcspkr/input/input1
Dec 5 07:57:18 [2] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Dec 5 07:57:18 [2] ACPI: Power Button [PWRF]
Dec 5 07:57:18 [2] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Dec 5 07:57:18 [2] ACPI: Power Button [PWRB]
Dec 5 07:57:18 [4] ACPI: SSDT 000000007c60ee18 001D8 (v01 AMI IST 00000001 MSFT 03000001)
Dec 5 07:57:18 [4] ACPI: SSDT 000000007c614d98 00054 (v01 AMI CST 00000001 MSFT 03000001)
Dec 5 07:57:18 [1] Monitor-Mwait will be used to enter C-3 state
Dec 5 07:57:18 [2] ACPI: CPU0 (power states: C1[C1] C2[C3])
Dec 5 07:57:18 [2] processor ACPI_CPU:00: registered as cooling_device0
Dec 5 07:57:18 [2] ACPI: Processor [P000] (supports 8 throttling states)
Dec 5 07:57:18 [2] ACPI: CPU1 (power states: C1[C1] C2[C3])
Dec 5 07:57:18 [2] processor ACPI_CPU:01: registered as cooling_device1
Dec 5 07:57:18 [2] ACPI: Processor [P001] (supports 8 throttling states)
Dec 5 07:57:19 [2] usbcore: registered new interface driver usbfs
Dec 5 07:57:19 [2] usbcore: registered new interface driver hub
Dec 5 07:57:19 [2] usbcore: registered new device driver usb
Dec 5 07:57:19 [2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 5 07:57:19 [1] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1a.0: debug port 2
Dec 5 07:57:19 [1] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbe03000
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Dec 5 07:57:19 [2] usb usb1: configuration #1 chosen from 1 choice
Dec 5 07:57:19 [2] hub 1-0:1.0: USB hub found
Dec 5 07:57:19 [2] hub 1-0:1.0: 2 ports detected
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Dec 5 07:57:19 [1] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1d.0: debug port 2
Dec 5 07:57:19 [1] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbe02000
Dec 5 07:57:19 [2] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Dec 5 07:57:19 [2] usb usb2: configuration #1 chosen from 1 choice
Dec 5 07:57:19 [2] hub 2-0:1.0: USB hub found
Dec 5 07:57:19 [2] hub 2-0:1.0: 2 ports detected
Dec 5 07:57:19 [2] sc92031 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Dec 5 07:57:19 [2] eth0: SC92031 at 0xfbc20000, 00:e0:a0:00:c5:1c, IRQ 18
Dec 5 07:57:19 [3] SCSI subsystem initialized
Dec 5 07:57:19 [1] libata version 3.00 loaded.
Dec 5 07:57:19 [2] sata_mv 0000:03:01.0: version 1.28
Dec 5 07:57:19 [2] sata_mv 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Dec 5 07:57:19 [2] sata_mv 0000:03:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Dec 5 07:57:19 [2] scsi0 : sata_mv
Dec 5 07:57:19 [2] scsi1 : sata_mv
Dec 5 07:57:19 [2] scsi2 : sata_mv
Dec 5 07:57:19 [2] scsi3 : sata_mv
Dec 5 07:57:19 [2] ata1: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb922000 irq 19
Dec 5 07:57:19 [2] ata2: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb924000 irq 19
Dec 5 07:57:19 [2] ata3: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb926000 irq 19
Dec 5 07:57:19 [2] ata4: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb928000 irq 19
Dec 5 07:57:19 [2] sata_mv 0000:03:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 5 07:57:19 [2] sata_mv 0000:03:02.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Dec 5 07:57:19 [2] scsi4 : sata_mv
Dec 5 07:57:19 [2] scsi5 : sata_mv
Dec 5 07:57:19 [2] scsi6 : sata_mv
Dec 5 07:57:19 [2] scsi7 : sata_mv
Dec 5 07:57:19 [2] ata5: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb822000 irq 16
Dec 5 07:57:19 [2] ata6: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb824000 irq 16
Dec 5 07:57:19 [2] ata7: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb826000 irq 16
Dec 5 07:57:19 [2] ata8: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb828000 irq 16
Dec 5 07:57:19 [2] usb 1-1: new high speed USB device using ehci_hcd and address 2
Dec 5 07:57:19 [2] usb 1-1: configuration #1 chosen from 1 choice
Dec 5 07:57:19 [2] hub 1-1:1.0: USB hub found
Dec 5 07:57:19 [2] hub 1-1:1.0: 4 ports detected
Dec 5 07:57:19 [2] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:19 [2] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:19 [2] usb 2-1: new high speed USB device using ehci_hcd and address 2
Dec 5 07:57:19 [2] ata1.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Dec 5 07:57:19 [2] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Dec 5 07:57:19 [2] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Dec 5 07:57:19 [2] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Dec 5 07:57:19 [2] ata1.00: configured for UDMA/133
Dec 5 07:57:19 [3] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Dec 5 07:57:19 [2] ata5.00: configured for UDMA/133
Dec 5 07:57:19 [2] usb 2-1: configuration #1 chosen from 1 choice
Dec 5 07:57:19 [2] hub 2-1:1.0: USB hub found
Dec 5 07:57:19 [2] hub 2-1:1.0: 6 ports detected
Dec 5 07:57:19 [2] usb 1-1.2: new high speed USB device using ehci_hcd and address 3
Dec 5 07:57:19 [2] usb 1-1.2: configuration #1 chosen from 1 choice
Dec 5 07:57:19 [2] hub 1-1.2:1.0: USB hub found
Dec 5 07:57:19 [2] hub 1-1.2:1.0: 1 port detected
Dec 5 07:57:20 [2] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:20 [2] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Dec 5 07:57:20 [2] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Dec 5 07:57:20 [2] usb 1-1.2.1: new high speed USB device using ehci_hcd and address 4
Dec 5 07:57:20 [2] usb 1-1.2.1: configuration #1 chosen from 1 choice
Dec 5 07:57:20 [2] ata2.00: configured for UDMA/133
Dec 5 07:57:20 [3] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Dec 5 07:57:21 [2] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:21 [2] ata3.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Dec 5 07:57:21 [2] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Dec 5 07:57:21 [2] ata3.00: configured for UDMA/133
Dec 5 07:57:21 [3] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Dec 5 07:57:21 [2] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:21 [2] ata4.00: ATA-8: ST2000DL003-9VT166, CC98, max UDMA/133
Dec 5 07:57:21 [2] ata4.00: 3907029168 sectors, multi 0: LBA48
Dec 5 07:57:21 [2] ata4.00: configured for UDMA/133
Dec 5 07:57:21 [3] scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC98 PQ: 0 ANSI: 5
Dec 5 07:57:21 [3] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Dec 5 07:57:22 [2] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:22 [2] ata6.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Dec 5 07:57:22 [2] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Dec 5 07:57:22 [2] ata6.00: configured for UDMA/133
Dec 5 07:57:22 [3] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Dec 5 07:57:22 [2] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:23 [2] ata7.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Dec 5 07:57:23 [2] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Dec 5 07:57:23 [2] ata7.00: configured for UDMA/133
Dec 5 07:57:23 [3] scsi 6:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Dec 5 07:57:23 [2] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:23 [2] ata8.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
Dec 5 07:57:23 [2] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Dec 5 07:57:23 [2] ata8.00: configured for UDMA/133
Dec 5 07:57:23 [3] scsi 7:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
Dec 5 07:57:23 [1] ahci 0000:00:1f.2: version 3.0
Dec 5 07:57:23 [2] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Dec 5 07:57:23 [2] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
Dec 5 07:57:23 [2] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
Dec 5 07:57:23 [1] ahci 0000:00:1f.2: setting latency timer to 64
Dec 5 07:57:23 [2] scsi8 : ahci
Dec 5 07:57:23 [2] scsi9 : ahci
Dec 5 07:57:23 [2] scsi10 : ahci
Dec 5 07:57:23 [2] scsi11 : ahci
Dec 5 07:57:23 [2] scsi12 : ahci
Dec 5 07:57:23 [2] scsi13 : ahci
Dec 5 07:57:23 [2] ata9: SATA max UDMA/133 abar m2048@0xfbe01000 port 0xfbe01100 irq 19
Dec 5 07:57:23 [2] ata10: SATA max UDMA/133 abar m2048@0xfbe01000 port 0xfbe01180 irq 19
Dec 5 07:57:23 [2] ata11: DUMMY
Dec 5 07:57:23 [2] ata12: DUMMY
Dec 5 07:57:23 [2] ata13: SATA max UDMA/133 abar m2048@0xfbe01000 port 0xfbe01300 irq 19
Dec 5 07:57:23 [2] ata14: SATA max UDMA/133 abar m2048@0xfbe01000 port 0xfbe01380 irq 19
Dec 5 07:57:23 [2] ahci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec 5 07:57:23 [2] ahci: SSS flag set, parallel bus scan disabled
Dec 5 07:57:23 [2] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Dec 5 07:57:23 [2] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part
Dec 5 07:57:23 [1] ahci 0000:04:00.0: setting latency timer to 64
Dec 5 07:57:23 [2] scsi14 : ahci
Dec 5 07:57:23 [2] scsi15 : ahci
Dec 5 07:57:23 [2] ata15: SATA max UDMA/133 abar m512@0xfbd00000 port 0xfbd00100 irq 17
Dec 5 07:57:23 [2] ata16: SATA max UDMA/133 abar m512@0xfbd00000 port 0xfbd00180 irq 17
Dec 5 07:57:24 [2] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:24 [2] ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:24 [2] ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:24 [2] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 5 07:57:24 [2] ata10.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Dec 5 07:57:24 [2] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 5 07:57:24 [2] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 50.0AB50, max UDMA/133
Dec 5 07:57:24 [2] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 5 07:57:24 [2] ata14.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Dec 5 07:57:24 [2] ata14.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 5 07:57:24 [2] ata15: SATA link down (SStatus 0 SControl 300)
Dec 5 07:57:24 [2] ata13.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Dec 5 07:57:24 [2] ata13.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 5 07:57:24 [2] ata9.00: configured for UDMA/133
Dec 5 07:57:24 [2] ata14.00: configured for UDMA/133
Dec 5 07:57:24 [2] ata10.00: configured for UDMA/133
Dec 5 07:57:24 [2] ata13.00: configured for UDMA/133
Dec 5 07:57:24 [3] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARS-00M 50.0 PQ: 0 ANSI: 5
Dec 5 07:57:24 [3] scsi 9:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Dec 5 07:57:24 [3] scsi 12:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Dec 5 07:57:24 [3] scsi 13:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Dec 5 07:57:24 [2] ata16: SATA link down (SStatus 0 SControl 300)
Dec 5 07:57:25 [2] Initializing USB Mass Storage driver.
Dec 5 07:57:25 [2] scsi16 : SCSI emulation for USB Mass Storage devices
Dec 5 07:57:25 [1] usb-storage: device found at 4
Dec 5 07:57:25 [1] usb-storage: waiting for device to settle before scanning
Dec 5 07:57:25 [2] usbcore: registered new interface driver usb-storage
Dec 5 07:57:25 [2] USB Mass Storage support registered.
Dec 5 07:57:25 [4] Driver 'sd' needs updating - please use bus_type methods
Dec 5 07:57:25 [3] sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 0:0:0:0: [sda] Write Protect is off
Dec 5 07:57:25 [1] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sda:<5>sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 1:0:0:0: [sdb] Write Protect is off
Dec 5 07:57:25 [1] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdb:<5>sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 2:0:0:0: [sdc] Write Protect is off
Dec 5 07:57:25 [1] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdc:
Dec 5 07:57:25 [3] sd 3:0:0:0: [sdd] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 3:0:0:0: [sdd] Write Protect is off
Dec 5 07:57:25 [1] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdd:
Dec 5 07:57:25 [3] sd 4:0:0:0: [sde] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 4:0:0:0: [sde] Write Protect is off
Dec 5 07:57:25 [1] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sde:<5>sd 5:0:0:0: [sdf] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 5:0:0:0: [sdf] Write Protect is off
Dec 5 07:57:25 [1] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdf:<5>sd 6:0:0:0: [sdg] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 6:0:0:0: [sdg] Write Protect is off
Dec 5 07:57:25 [1] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdg:<5>sd 7:0:0:0: [sdh] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 7:0:0:0: [sdh] Write Protect is off
Dec 5 07:57:25 [1] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdh:<5>sd 9:0:0:0: [sdj] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 9:0:0:0: [sdj] Write Protect is off
Dec 5 07:57:25 [1] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdj:<5>sd 8:0:0:0: [sdi] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 8:0:0:0: [sdi] Write Protect is off
Dec 5 07:57:25 [1] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdi:<5>sd 12:0:0:0: [sdk] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 12:0:0:0: [sdk] Write Protect is off
Dec 5 07:57:25 [1] sd 12:0:0:0: [sdk] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 12:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdk:<5>sd 13:0:0:0: [sdl] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Dec 5 07:57:25 [3] sd 13:0:0:0: [sdl] Write Protect is off
Dec 5 07:57:25 [1] sd 13:0:0:0: [sdl] Mode Sense: 00 3a 00 00
Dec 5 07:57:25 [3] sd 13:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 5 07:57:25 [2] sdl:
Dec 5 07:57:25 [2] sdd1
Dec 5 07:57:25 [3] sd 3:0:0:0: [sdd] Attached SCSI disk
Dec 5 07:57:25 [4] sdh1
Dec 5 07:57:25 [4] sdb1
Dec 5 07:57:25 [3] sd 7:0:0:0: [sdh] Attached SCSI disk
Dec 5 07:57:25 [3] sd 1:0:0:0: [sdb] Attached SCSI disk
Dec 5 07:57:25 [4] sdk1
Dec 5 07:57:25 [3] sd 12:0:0:0: [sdk] Attached SCSI disk
Dec 5 07:57:25 [4] sdg1
Dec 5 07:57:25 [3] sd 6:0:0:0: [sdg] Attached SCSI disk
Dec 5 07:57:25 [4] unknown partition table
Dec 5 07:57:25 [3] sd 0:0:0:0: [sda] Attached SCSI disk
Dec 5 07:57:26 [4] sdj1
Dec 5 07:57:26 [4] sdf1
Dec 5 07:57:26 [3] sd 9:0:0:0: [sdj] Attached SCSI disk
Dec 5 07:57:26 [3] sd 5:0:0:0: [sdf] Attached SCSI disk
Dec 5 07:57:26 [4] sdl1
Dec 5 07:57:26 [3] sd 13:0:0:0: [sdl] Attached SCSI disk
Dec 5 07:57:26 [4] sdc1
Dec 5 07:57:26 [3] sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 5 07:57:26 [4] sde1
Dec 5 07:57:26 [3] sd 4:0:0:0: [sde] Attached SCSI disk
Dec 5 07:57:26 [4] sdi1
Dec 5 07:57:26 [3] sd 8:0:0:0: [sdi] Attached SCSI disk
Dec 5 07:57:30 [3] scsi 16:0:0:0: Direct-Access LG X-tick 2.0 1.00 PQ: 0 ANSI: 0 CCS
Dec 5 07:57:30 [1] usb-storage: device scan complete
Dec 5 07:57:30 [3] sd 16:0:0:0: [sdm] 2031616 512-byte hardware sectors: (1.04 GB/992 MiB)
Dec 5 07:57:30 [3] sd 16:0:0:0: [sdm] Write Protect is off
Dec 5 07:57:30 [1] sd 16:0:0:0: [sdm] Mode Sense: 00 26 00 00
Dec 5 07:57:30 [5] sd 16:0:0:0: [sdm] Assuming drive cache: write through
Dec 5 07:57:30 [5] sd 16:0:0:0: [sdm] Assuming drive cache: write through
Dec 5 07:57:30 [2] sdm:
Dec 5 07:57:30 [2] sdm1 sdm2
Dec 5 07:57:30 [3] sd 16:0:0:0: [sdm] Attached SCSI removable disk
Dec 5 07:58:29 [2] eth0: link down
Dec 5 07:58:31 [2] eth0: link up, 100Mbps, full-duplex
Dec 5 07:58:44 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:44 [2] EXT3 FS on sdb1, internal journal
Dec 5 07:58:44 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:44 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:44 [2] EXT3 FS on sdk1, internal journal
Dec 5 07:58:44 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:44 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:44 [2] EXT3 FS on sdl1, internal journal
Dec 5 07:58:44 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sdc1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sdd1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sde1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sdf1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sdg1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sdh1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sdi1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 07:58:45 [2] kjournald starting. Commit interval 5 seconds
Dec 5 07:58:45 [2] EXT3 FS on sdj1, internal journal
Dec 5 07:58:45 [2] EXT3-fs: mounted filesystem with writeback data mode.
Dec 5 08:48:26 [5] irq 16: nobody cared (try booting with the "irqpoll" option)
Dec 5 08:48:26 [4] Pid: 0, comm: swapper Not tainted 2.6.30.3-64-CORE3 #1
Dec 5 08:48:26 [4] Call Trace:
Dec 5 08:48:26 [4] [] ? __report_bad_irq+0x30/0x7d
Dec 5 08:48:26 [4] [] ? note_interrupt+0x105/0x16e
Dec 5 08:48:26 [4] [] ? handle_fasteoi_irq+0x8e/0xaf
Dec 5 08:48:26 [4] [] ? handle_irq+0x17/0x20
Dec 5 08:48:26 [4] [] ? do_IRQ+0x57/0xbf
Dec 5 08:48:26 [4] [] ? ret_from_intr+0x0/0xa
Dec 5 08:48:26 [4] [] ? acpi_idle_enter_bm+0x2a7/0x2d0 [processor]
Dec 5 08:48:26 [4] [] ? acpi_idle_enter_bm+0x29d/0x2d0 [processor]
Dec 5 08:48:26 [4] [] ? cpuidle_idle_call+0x92/0xc9
Dec 5 08:48:26 [4] [] ? cpuidle_idle_call+0x8b/0xc9
Dec 5 08:48:26 [4] [] ? cpu_idle+0x40/0x7c
Dec 5 08:48:26 [4] [] ? start_kernel+0x319/0x325
Dec 5 08:48:26 [4] [] ? x86_64_start_kernel+0xe5/0xeb
Dec 5 08:48:26 [5] handlers:
Dec 5 08:48:26 [5] [] (usb_hcd_irq+0x0/0x64 [usbcore])
Dec 5 08:48:26 [5] [] (mv_interrupt+0x0/0x802 [sata_mv])
Dec 5 08:48:26 [8] Disabling IRQ #16

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Thu Nov 07, 2013 8:06 am

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

Just got another IRQ on 18;

Dec 8 00:09:58 [5] irq 18: nobody cared (try booting with the "irqpoll" option)
Dec 8 00:09:58 [4] Pid: 0, comm: swapper Not tainted 2.6.30.3-64-CORE3 #1
Dec 8 00:09:58 [4] Call Trace:
Dec 8 00:09:58 [4] [] ? sc92031_interrupt+0x83/0x8f [sc92031]
Dec 8 00:09:58 [4] [] ? __report_bad_irq+0x30/0x7d
Dec 8 00:09:58 [4] [] ? note_interrupt+0x105/0x16e
Dec 8 00:09:58 [4] [] ? handle_fasteoi_irq+0x8e/0xaf
Dec 8 00:09:58 [4] [] ? handle_irq+0x17/0x20
Dec 8 00:09:58 [4] [] ? do_IRQ+0x57/0xbf
Dec 8 00:09:58 [4] [] ? ret_from_intr+0x0/0xa
Dec 8 00:09:58 [4] [] ? acpi_idle_enter_bm+0x2a7/0x2d0 [processor]
Dec 8 00:09:58 [4] [] ? acpi_idle_enter_bm+0x29d/0x2d0 [processor]
Dec 8 00:09:58 [4] [] ? cpuidle_idle_call+0x8b/0xc9
Dec 8 00:09:58 [4] [] ? cpu_idle+0x40/0x7c
Dec 8 00:09:58 [4] [] ? start_kernel+0x319/0x325
Dec 8 00:09:58 [4] [] ? x86_64_start_kernel+0xe5/0xeb
Dec 8 00:09:58 [5] handlers:
Dec 8 00:09:58 [5] [] (sc92031_interrupt+0x0/0x8f [sc92031])
Dec 8 00:09:58 [8] Disabling IRQ #18

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Tue Nov 12, 2013 2:57 am

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

After a few reboots and checking I finally got all three IRQ. This was about 10 hours after a fresh reboot.

Nov 12 11:06:25 [5] irq 16: nobody cared (try booting with the "irqpoll" option)
Nov 12 11:06:25 [4] Pid: 0, comm: swapper Not tainted 2.6.30.3-64-CORE3 #1
Nov 12 11:06:25 [4] Call Trace:
Nov 12 11:06:25 [4] [] ? __report_bad_irq+0x30/0x7d
Nov 12 11:06:25 [4] [] ? note_interrupt+0x105/0x16e
Nov 12 11:06:25 [4] [] ? handle_fasteoi_irq+0x8e/0xaf
Nov 12 11:06:25 [4] [] ? handle_irq+0x17/0x20
Nov 12 11:06:25 [4] [] ? do_IRQ+0x57/0xbf
Nov 12 11:06:25 [4] [] ? ret_from_intr+0x0/0xa
Nov 12 11:06:25 [4] [] ? acpi_idle_enter_bm+0x2a7/0x2d0 [processor]
Nov 12 11:06:25 [4] [] ? acpi_idle_enter_bm+0x29d/0x2d0 [processor]
Nov 12 11:06:25 [4] [] ? cpuidle_idle_call+0x8b/0xc9
Nov 12 11:06:25 [4] [] ? cpu_idle+0x40/0x7c
Nov 12 11:06:25 [4] [] ? start_kernel+0x319/0x325
Nov 12 11:06:25 [4] [] ? x86_64_start_kernel+0xe5/0xeb
Nov 12 11:06:25 [5] handlers:
Nov 12 11:06:25 [5] [] (usb_hcd_irq+0x0/0x64 [usbcore])
Nov 12 11:06:25 [5] [] (mv_interrupt+0x0/0x802 [sata_mv])
Nov 12 11:06:25 [8] Disabling IRQ #16
Nov 12 18:24:20 [5] irq 19: nobody cared (try booting with the "irqpoll" option)
Nov 12 18:24:20 [4] Pid: 0, comm: swapper Not tainted 2.6.30.3-64-CORE3 #1
Nov 12 18:24:20 [4] Call Trace:
Nov 12 18:24:20 [4] [] ? __report_bad_irq+0x30/0x7d
Nov 12 18:24:20 [4] [] ? note_interrupt+0x105/0x16e
Nov 12 18:24:20 [4] [] ? handle_fasteoi_irq+0x8e/0xaf
Nov 12 18:24:20 [4] [] ? handle_irq+0x17/0x20
Nov 12 18:24:20 [4] [] ? do_IRQ+0x57/0xbf
Nov 12 18:24:20 [4] [] ? ret_from_intr+0x0/0xa
Nov 12 18:24:20 [4] [] ? acpi_idle_enter_bm+0x2a7/0x2d0 [processor]
Nov 12 18:24:20 [4] [] ? acpi_idle_enter_bm+0x29d/0x2d0 [processor]
Nov 12 18:24:20 [4] [] ? cpuidle_idle_call+0x8b/0xc9
Nov 12 18:24:20 [4] [] ? cpu_idle+0x40/0x7c
Nov 12 18:24:20 [4] [] ? start_kernel+0x319/0x325
Nov 12 18:24:20 [4] [] ? x86_64_start_kernel+0xe5/0xeb
Nov 12 18:24:20 [5] handlers:
Nov 12 18:24:20 [5] [] (mv_interrupt+0x0/0x802 [sata_mv])
Nov 12 18:24:20 [5] [] (ahci_interrupt+0x0/0x450 [ahci])
Nov 12 18:24:20 [8] Disabling IRQ #19
Nov 12 18:36:55 [5] irq 18: nobody cared (try booting with the "irqpoll" option)
Nov 12 18:36:55 [4] Pid: 0, comm: swapper Not tainted 2.6.30.3-64-CORE3 #1
Nov 12 18:36:55 [4] Call Trace:
Nov 12 18:36:55 [4] [] ? sc92031_interrupt+0x83/0x8f [sc92031]
Nov 12 18:36:55 [4] [] ? __report_bad_irq+0x30/0x7d
Nov 12 18:36:55 [4] [] ? note_interrupt+0x105/0x16e
Nov 12 18:36:55 [4] [] ? handle_fasteoi_irq+0x8e/0xaf
Nov 12 18:36:55 [4] [] ? handle_irq+0x17/0x20
Nov 12 18:36:55 [4] [] ? do_IRQ+0x57/0xbf
Nov 12 18:36:55 [4] [] ? ret_from_intr+0x0/0xa
Nov 12 18:36:55 [4] [] ? acpi_idle_enter_bm+0x2a7/0x2d0 [processor]
Nov 12 18:36:55 [4] [] ? acpi_idle_enter_bm+0x29d/0x2d0 [processor]
Nov 12 18:36:55 [4] [] ? cpuidle_idle_call+0x8b/0xc9
Nov 12 18:36:55 [4] [] ? cpu_idle+0x40/0x7c
Nov 12 18:36:55 [4] [] ? start_kernel+0x319/0x325
Nov 12 18:36:55 [4] [] ? x86_64_start_kernel+0xe5/0xeb
Nov 12 18:36:55 [5] handlers:
Nov 12 18:36:55 [5] [] (sc92031_interrupt+0x0/0x8f [sc92031])
Nov 12 18:36:55 [8] Disabling IRQ #18

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Wed Dec 18, 2013 7:22 pm

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

This questions has remained unanswered for over a month now. I have to reboot my NASLite system everyday to keep it functional. My enthusiasm for your product diminishes daily.

Top

Ralph

Post subject: Re: New upgrade and IRQ question

Posted: Wed Dec 18, 2013 10:49 pm

Site Admin

Joined: Tue Jul 13, 2004 4:01 pm
Posts: 801
Location: ServerElements

You definately have a hardware issue.

Have you made any bios adjustments?

Googling : irq 16: nobody cared (try booting with the "irqpoll" option)

Turns up thousands of hits.

I'll do a little research, you may have to add a kernel command line parameter for the kernel to ignore the bad hardwares behavior.

Quote:

This questions has remained unanswered for over a month now. I have to reboot my NASLite system everyday to keep it functional. My enthusiasm for your product diminishes daily.

We typically allow the community help answer bad hardware problems.

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Sat Dec 21, 2013 7:12 am

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

I agree it is a hardware issue. I have googled 'irq 16: etc etc' in the past and found too many solutions that are too complex or time consuming. I was hoping for some kind of software fix within NASlite, hence why I was asking if upgrading NASlite would fix this for me. I'm pretty sure it has something to do with the PCI ethernet card I had to install because NASlite doesn't recognise the onboard LAN on the MOBO. I've been looking at the FreeNas product, hoping this product might resolve the issue for me. Even a PC side script (I wouldn't know the first thing about writing a script to do this) that automatically reboots my NASlite every 24 hours would be a better solution, or the ability to do a timed reboot within the NASlite software, but thats is asking too much I feel. It is more simple and easier for me to just keep rebooting it everyday. It's not ideal, especially when I discover it's gone down during large transfers but I just need to remember that I'm using cheap software and not an expensive commercial NAS device.

Thanks for answering Ralph. I wasn't too sure how long an answer from the community would actually take. At least I have a benchmark now.

Top

tony a

Post subject: Re: New upgrade and IRQ question

Posted: Sat Dec 21, 2013 11:11 am

Joined: Sun May 27, 2007 5:38 pm
Posts: 517
Location: gods own country

this is a bit of i think - well part of it is - you can run a scheduled task from windows [have never done it though] - i think it can be set to run at pre determined intervals - that assumes the windows computer is on 24/7 - if not then theres obviously a problem

but assuming it is then running this script will cause the naslite server to reboot as and when its run

change your ip addy and login details if you have changed them

save it and name it reset.vbs - i have tested it manually and it works - it leaves a dos window open - no idea how to auto close it

i cannot give credit but have to say the work is not mine - only one small part of it - altering it from close to reset - so anon credit to whoever wrote the original script

Code:

ServerName = "192.168.1.66"
Username = "admin" ' Current Username 
Passwd = "nas" ' Current Password 

XIT = "E" ' Used to "EXIT" from NAS. (upper-case E) 
YES = "y" ' Used to confirm an option. (lower-case Y) 
RESTART = "7" ' Used to SHUTDOWN NAS. (number seven) 

DELAY = 1000 ' Minimum 500ms recommended; 1000 works well. 


' -------------------------------------------------------------------- 
' SECTION B: Start a Shell 
' -------------------------------------------------------------------- 
Set WshShell = WScript.CreateObject("WScript.Shell") 


' -------------------------------------------------------------------- 
' SECTION C: Start the TELNET 
' -------------------------------------------------------------------- 
WshShell.Run "telnet " + ServerName 

' -------------------------------------------------------------------- 
' SECTION D: Login. ("Sleep" pauses are needed delays.) 
' -------------------------------------------------------------------- 
WScript.Sleep DELAY 
WshShell.SendKeys Username + vbLf 
WScript.Sleep DELAY 
WshShell.SendKeys Passwd + vbLf 
WScript.Sleep DELAY 
WshShell.SendKeys RESTART + vbLf
WScript.Sleep DELAY 
WshShell.SendKeys YES + vbLf
WScript.Sleep DELAY 
WScript.quit

Top

robrub

Post subject: Re: New upgrade and IRQ question

Posted: Sat Dec 21, 2013 11:26 am

Joined: Sat Jun 02, 2007 2:45 am
Posts: 485
Location: France

Hi

It is bizarre that you are stuck with this IRQ problem.

As you do not need and use most of the IRQs using some hardware of your motherboard (sound, serial...), it is strange that you have 2 hardware using the same IRQs. And, as the problem arrives after some time of use, I'm almost sure that you have some hardware that is heating and not working well with this heat.

One experience (if you want to have some fun

) is to open your computer case and put in a fan to cool the motherboard and other hardware.

Robby

Top

mikeiver1

Post subject: Re: New upgrade and IRQ question

Posted: Sat Dec 21, 2013 1:28 pm

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!

Try moving the NIC to a different slot for starters. Also disable all the devices on board that are not needed. If these fail to help then try a different NIC. NICs are cheap and can be had for a few dollars off of Ebay for the good Intel NICs.

Mike

Top

Ralph

Post subject: Re: New upgrade and IRQ question

Posted: Sat Dec 21, 2013 3:36 pm

Site Admin

Joined: Tue Jul 13, 2004 4:01 pm
Posts: 801
Location: ServerElements

I apparently misinterpreted the post, I thought you upgraded to the latest version and were having problems, it's appears your running a old version.

If the new upgrade is modern hardware, I would really suggest upgrading to the latest version of NL.

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Thu Feb 20, 2014 4:41 am

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

Hello All,

Thank you for all your comments, suggestions and helpful tips.

I've just upgraded to the new software and can now use the lan port on the mobo which is an excellent start.

I had an IRQ 16 on a disk check after rebooting for the licence key, and I'll post the System Message Log after this.

I'll keep an eye on the system and see if the IRQ problem is resolved.

If it does appear, I'm wondering it it might have something to do with the 2x 4port SATA PCI cards I'm using... anyway, I'll cross that bridge with you once or if I come to it.

Thanks again for all your support. It's greatly appreciated.

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Thu Feb 20, 2014 4:41 am

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

Feb 20 20:24:05 [3] klogd started: BusyBox v1.12.1 (2009-11-19 21:21:30 UTC)
Feb 20 20:24:05 [3] Linux version 2.6.36.4.CORE3 (root@slax) (gcc version 4.2.1) #1 SMP Thu Oct 24 15:30:04 UTC 2013
Feb 20 20:24:05 [2] Command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
Feb 20 20:24:05 [2] BIOS-provided physical RAM map:
Feb 20 20:24:05 [2] BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
Feb 20 20:24:05 [2] BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
Feb 20 20:24:05 [2] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
Feb 20 20:24:05 [2] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 0000000040200000 - 000000007a4d6000 (usable)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a4d6000 - 000000007a51d000 (ACPI NVS)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a51d000 - 000000007a525000 (ACPI data)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a525000 - 000000007a5f7000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a5f7000 - 000000007a5f9000 (usable)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a5f9000 - 000000007a609000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a609000 - 000000007a616000 (ACPI NVS)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a616000 - 000000007a63e000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a63e000 - 000000007a681000 (ACPI NVS)
Feb 20 20:24:05 [2] BIOS-e820: 000000007a681000 - 000000007a800000 (usable)
Feb 20 20:24:05 [2] BIOS-e820: 000000007b000000 - 000000007f200000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Feb 20 20:24:05 [2] BIOS-e820: 0000000100000000 - 0000000100600000 (usable)
Feb 20 20:24:05 [2] NX (Execute Disable) protection: active
Feb 20 20:24:05 [2] DMI 2.7 present.
Feb 20 20:24:05 [3] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Feb 20 20:24:05 [1] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Feb 20 20:24:05 [1] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
Feb 20 20:24:05 [1] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Feb 20 20:24:05 [2] No AGP bridge found
Feb 20 20:24:05 [2] last_pfn = 0x100600 max_arch_pfn = 0x400000000
Feb 20 20:24:05 [1] MTRR default type: uncachable
Feb 20 20:24:05 [1] MTRR fixed ranges enabled:
Feb 20 20:24:05 [1] 00000-9FFFF write-back
Feb 20 20:24:05 [1] A0000-BFFFF uncachable
Feb 20 20:24:05 [1] C0000-D7FFF write-protect
Feb 20 20:24:05 [1] D8000-E7FFF uncachable
Feb 20 20:24:05 [1] E8000-FFFFF write-protect
Feb 20 20:24:05 [1] MTRR variable ranges enabled:
Feb 20 20:24:05 [1] 0 base 000000000 mask F00000000 write-back
Feb 20 20:24:05 [1] 1 base 100000000 mask FFFC00000 write-back
Feb 20 20:24:05 [1] 2 base 100400000 mask FFFE00000 write-back
Feb 20 20:24:05 [1] 3 base 07B000000 mask FFF000000 uncachable
Feb 20 20:24:05 [1] 4 base 07C000000 mask FFC000000 uncachable
Feb 20 20:24:05 [1] 5 base 080000000 mask F80000000 uncachable
Feb 20 20:24:05 [1] 6 disabled
Feb 20 20:24:05 [1] 7 disabled
Feb 20 20:24:05 [1] 8 disabled
Feb 20 20:24:05 [1] 9 disabled
Feb 20 20:24:05 [2] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Feb 20 20:24:05 [1] e820 update range: 000000007b000000 - 0000000100000000 (usable) ==> (reserved)
Feb 20 20:24:05 [2] last_pfn = 0x7a800 max_arch_pfn = 0x400000000
Feb 20 20:24:05 [1] initial memory mapped : 0 - 20000000
Feb 20 20:24:05 [2] found SMP MP-table at [ffff8800000fce10] fce10
Feb 20 20:24:05 [2] init_memory_mapping: 0000000000000000-000000007a800000
Feb 20 20:24:05 [1] 0000000000 - 007a800000 page 2M
Feb 20 20:24:05 [1] kernel direct mapping tables up to 7a800000 @ 12000-15000
Feb 20 20:24:05 [2] init_memory_mapping: 0000000100000000-0000000100600000
Feb 20 20:24:05 [1] 0100000000 - 0100600000 page 2M
Feb 20 20:24:05 [1] kernel direct mapping tables up to 100600000 @ 13000-19000
Feb 20 20:24:05 [2] RAMDISK: 1f69b000 - 1ffff000
Feb 20 20:24:05 [4] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
Feb 20 20:24:05 [4] ACPI: XSDT 000000007a51d068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
Feb 20 20:24:05 [4] ACPI: FACP 000000007a5243c8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
Feb 20 20:24:05 [4] ACPI: DSDT 000000007a51d150 07271 (v02 ALASKA A M I 00000015 INTL 20051117)
Feb 20 20:24:05 [4] ACPI: FACS 000000007a60df80 00040
Feb 20 20:24:05 [4] ACPI: APIC 000000007a5244c0 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
Feb 20 20:24:05 [4] ACPI: SSDT 000000007a524528 00098 (v01 AMICPU PROC 00000001 MSFT 03000001)
Feb 20 20:24:05 [4] ACPI: MCFG 000000007a5245c0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
Feb 20 20:24:05 [4] ACPI: HPET 000000007a524600 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
Feb 20 20:24:05 [4] ACPI: ASF! 000000007a524638 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
Feb 20 20:24:05 [1] ACPI: Local APIC address 0xfee00000
Feb 20 20:24:05 [1] [ffffea0000000000-ffffea00039fffff] PMD -> [ffff880001c00000-ffff8800039fffff] on node 0
Feb 20 20:24:05 [4] Zone PFN ranges:
Feb 20 20:24:05 [4] DMA 0x00000010 -> 0x00001
Feb 20 20:24:05 [2] 000
Feb 20 20:24:05 [4] DMA32 0x00001000 -> 0x00100000
Feb 20 20:24:05 [4] Normal 0x00100000 -> 0x00100600
Feb 20 20:24:05 [4] Movable zone start PFN for each node
Feb 20 20:24:05 [4] early_node_map[7] active PFN ranges
Feb 20 20:24:05 [4] 0: 0x00000010 -> 0x00000099
Feb 20 20:24:05 [4] 0: 0x00000100 -> 0x00020000
Feb 20 20:24:05 [4] 0: 0x00020200 -> 0x00040000
Feb 20 20:24:05 [4] 0: 0x00040200 -> 0x0007a4d6
Feb 20 20:24:05 [4] 0: 0x0007a5f7 -> 0x0007a5f9
Feb 20 20:24:05 [4] 0: 0x0007a681 -> 0x0007a800
Feb 20 20:24:05 [4] 0: 0x00100000 -> 0x00100600
Feb 20 20:24:05 [1] On node 0 totalpages: 501728
Feb 20 20:24:05 [1] DMA zone: 56 pages used for memmap
Feb 20 20:24:05 [1] DMA zone: 0 pages reserved
Feb 20 20:24:05 [1] DMA zone: 3921 pages, LIFO batch:0
Feb 20 20:24:05 [1] DMA32 zone: 14280 pages used for memmap
Feb 20 20:24:05 [1] DMA32 zone: 481935 pages, LIFO batch:31
Feb 20 20:24:05 [1] Normal zone: 21 pages used for memmap
Feb 20 20:24:05 [1] Normal zone: 1515 pages, LIFO batch:0
Feb 20 20:24:05 [2] ACPI: PM-Timer IO Port: 0x408
Feb 20 20:24:05 [1] ACPI: Local APIC address 0xfee00000
Feb 20 20:24:05 [2] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Feb 20 20:24:05 [2] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Feb 20 20:24:05 [2] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Feb 20 20:24:05 [2] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Feb 20 20:24:05 [2] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
Feb 20 20:24:05 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 20 20:24:05 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 20 20:24:05 [1] ACPI: IRQ0 used by override.
Feb 20 20:24:05 [1] ACPI: IRQ2 used by override.
Feb 20 20:24:05 [1] ACPI: IRQ9 used by override.
Feb 20 20:24:05 [2] Using ACPI (MADT) for SMP configuration information
Feb 20 20:24:05 [2] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Feb 20 20:24:05 [2] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Feb 20 20:24:05 [1] nr_irqs_gsi: 40
Feb 20 20:24:05 [1] early_res array is doubled to 64 at [14000 - 147ff]
Feb 20 20:24:05 [2] Allocating PCI resources starting at 7f200000 (gap: 7f200000:7fb1c000)
Feb 20 20:24:05 [2] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Feb 20 20:24:05 [2] PERCPU: Embedded 26 pages/cpu @ffff880001400000 s75712 r8192 d22592 u1048576
Feb 20 20:24:05 [2] pcpu-alloc: s75712 r8192 d22592 u1048576 alloc=1*2097152
Feb 20 20:24:05 [2] pcpu-alloc: [0] 0 1
Feb 20 20:24:05 [1] early_res array is doubled to 128 at [14800 - 157ff]
Feb 20 20:24:05 [4] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487371
Feb 20 20:24:05 [3] Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
Feb 20 20:24:05 [2] PID hash table entries: 4096 (order: 3, 32768 bytes)
Feb 20 20:24:05 [2] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Feb 20 20:24:05 [2] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 20 20:24:05 [2] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Feb 20 20:24:05 [2] Checking aperture.
Feb 20 20:24:05 [2] No AGP bridge found
Feb 20 20:24:05 [2] Subtract (66 early reservations)
Feb 20 20:24:05 [2] #1 [0001000000 - 00013d05f4] TEXT DATA BSS
Feb 20 20:24:05 [2] #2 [001f69b000 - 001ffff000] RAMDISK
Feb 20 20:24:05 [2] #3 [00013d1000 - 00013d12c6] BRK
Feb 20 20:24:05 [2] #4 [00000fce20 - 0000100000] BIOS reserved
Feb 20 20:24:05 [2] #5 [00000fce10 - 00000fce20] MP-table mpf
Feb 20 20:24:05 [2] #6 [0000099000 - 00000fcb80] BIOS reserved
Feb 20 20:24:05 [2] #7 [00000fcd94 - 00000fce10] BIOS reserved
Feb 20 20:24:05 [2] #8 [00000fcb80 - 00000fcd94] MP-table mpc
Feb 20 20:24:05 [2] #9 [0000010000 - 0000012000] TRAMPOLINE
Feb 20 20:24:05 [2] #10 [0000012000 - 0000013000] PGTABLE
Feb 20 20:24:05 [2] #11 [0000013000 - 0000014000] PGTABLE
Feb 20 20:24:05 [2] #12 [00013d1300 - 00013d2300] BOOTMEM
Feb 20 20:24:05 [2] #13 [00013d0600 - 00013d0710] BOOTMEM
Feb 20 20:24:05 [2] #14 [0001bd3000 - 0001bd4000] BOOTMEM
Feb 20 20:24:05 [2] #15 [0001bd4000 - 0001bd5000] BOOTMEM
Feb 20 20:24:05 [2] #16 [0001c00000 - 0003a00000] MEMMAP 0
Feb 20 20:24:05 [2] #17 [00013d0740 - 00013d08c0] BOOTMEM
Feb 20 20:24:05 [2] #18 [00013d2300 - 00013ea300] BOOTMEM
Feb 20 20:24:05 [2] #19 [00013d08c0 - 00013d0980] BOOTMEM
Feb 20 20:24:05 [2] #20 [00013eb000 - 00013ec000] BOOTMEM
Feb 20 20:24:05 [2] #21 [00013d0980 - 00013d09c1] BOOTMEM
Feb 20 20:24:05 [2] #22 [00013d0a00 - 00013d0a43] BOOTMEM
Feb 20 20:24:05 [2] #23 [00013d0a80 - 00013d0f50] BOOTMEM
Feb 20 20:24:05 [2] #24 [00013d0f80 - 00013d0fe8] BOOTMEM
Feb 20 20:24:05 [2] #25 [00013ea300 - 00013ea368] BOOTMEM
Feb 20 20:24:05 [2] #26 [00013ea380 - 00013ea3e8] BOOTMEM
Feb 20 20:24:05 [2] #27 [00013ea400 - 00013ea468] BOOTMEM
Feb 20 20:24:05 [2] #28 [00013ea480 - 00013ea4e8] BOOTMEM
Feb 20 20:24:05 [2] #29 [00013ea500 - 00013ea568] BOOTMEM
Feb 20 20:24:05 [2] #30 [00013ea580 - 00013ea5e8] BOOTMEM
Feb 20 20:24:05 [2] #31 [00013ea600 - 00013ea668] BOOTMEM
Feb 20 20:24:05 [2] #32 [00013ea680 - 00013ea6e8] BOOTMEM
Feb 20 20:24:05 [2] #33 [00013ea700 - 00013ea768] BOOTMEM
Feb 20 20:24:05 [2] #34 [00013ea780 - 00013ea7e8]
Feb 20 20:24:05 [2] BOOTMEM
Feb 20 20:24:05 [2] #35 [00013ea800 - 00013ea868] BOOTMEM
Feb 20 20:24:05 [2] #36 [00013ea880 - 00013ea8e8] BOOTMEM
Feb 20 20:24:05 [2] #37 [00013ea900 - 00013ea968] BOOTMEM
Feb 20 20:24:05 [2] #38 [00013ea980 - 00013ea9e8] BOOTMEM
Feb 20 20:24:05 [2] #39 [00013eaa00 - 00013eaa68] BOOTMEM
Feb 20 20:24:05 [2] #40 [00013eaa80 - 00013eaae8] BOOTMEM
Feb 20 20:24:05 [2] #41 [00013eab00 - 00013eab68] BOOTMEM
Feb 20 20:24:05 [2] #42 [00013eab80 - 00013eabe8] BOOTMEM
Feb 20 20:24:05 [2] #43 [00013eac00 - 00013eac68] BOOTMEM
Feb 20 20:24:05 [2] #44 [00013eac80 - 00013eace8] BOOTMEM
Feb 20 20:24:05 [2] #45 [00013ead00 - 00013ead41] BOOTMEM
Feb 20 20:24:05 [2] #46 [00013ead80 - 00013eadc1] BOOTMEM
Feb 20 20:24:05 [2] #47 [0001400000 - 000141a000] BOOTMEM
Feb 20 20:24:05 [2] #48 [0001500000 - 000151a000] BOOTMEM
Feb 20 20:24:05 [2] #49 [00013eae00 - 00013eae08] BOOTMEM
Feb 20 20:24:05 [2] #50 [00013eae40 - 00013eae48] BOOTMEM
Feb 20 20:24:05 [2] #51 [00013eae80 - 00013eae88] BOOTMEM
Feb 20 20:24:05 [2] #52 [00013eaec0 - 00013eaed0] BOOTMEM
Feb 20 20:24:05 [2] #53 [00013ee000 - 00013ee140] BOOTMEM
Feb 20 20:24:05 [2] #54 [00013eaf00 - 00013eaf60] BOOTMEM
Feb 20 20:24:05 [2] #55 [00013eaf80 - 00013eafe0] BOOTMEM
Feb 20 20:24:05 [2] #56 [00013ee140 - 00013f6140] BOOTMEM
Feb 20 20:24:05 [2] #57 [000151a000 - 000171a000] BOOTMEM
Feb 20 20:24:05 [2] #58 [000171a000 - 000181a000] BOOTMEM
Feb 20 20:24:05 [2] #59 [00013ec000 - 00013ec008] BOOTMEM
Feb 20 20:24:05 [2] #60 [00013ec040 - 00013ec048] BOOTMEM
Feb 20 20:24:05 [2] #61 [00013ec080 - 00013ec2c0] BOOTMEM
Feb 20 20:24:05 [2] #62 [0003a00000 - 0007a00000] BOOTMEM
Feb 20 20:24:05 [2] #63 [000141a000 - 000143a000] BOOTMEM
Feb 20 20:24:05 [2] #64 [000143a000 - 000147a000] BOOTMEM
Feb 20 20:24:05 [2] #65 [0000015800 - 000001d800] BOOTMEM
Feb 20 20:24:05 [2] Memory: 1893260k/4200448k available (2106k kernel code, 2193536k absent, 113652k reserved, 1067k data, 396k init)
Feb 20 20:24:05 [2] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Feb 20 20:24:05 [2] Hierarchical RCU implementation.
Feb 20 20:24:05 [2] Verbose stalled-CPUs detection is disabled.
Feb 20 20:24:05 [2] NR_IRQS:512
Feb 20 20:24:05 [2] Extended CMOS year: 2000
Feb 20 20:24:05 [4] Console: colour VGA+ 80x25
Feb 20 20:24:05 [2] console [tty0] enabled
Feb 20 20:24:05 [1] hpet clockevent registered
Feb 20 20:24:05 [4] Fast TSC calibration using PIT
Feb 20 20:24:05 [4] Detected 2394.644 MHz processor.
Feb 20 20:24:05 [2] Calibrating delay loop (skipped), value calculated using timer frequency 4789.28 BogoMIPS (lpj=9578576)
Feb 20 20:24:05 [2] pid_max: default: 32768 minimum: 301
Feb 20 20:24:05 [4] Mount-cache hash table entries: 256
Feb 20 20:24:05 [2] CPU: Physical Processor ID: 0
Feb 20 20:24:05 [2] CPU: Processor Core ID: 0
Feb 20 20:24:05 [2] using mwait in idle threads.
Feb 20 20:24:05 [2] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
Feb 20 20:24:05 [2] . version: 3
Feb 20 20:24:05 [2] . bit width: 48
Feb 20 20:24:05 [2] . generic registers: 8
Feb 20 20:24:05 [2] . value mask: 0000ffffffffffff
Feb 20 20:24:05 [2] . max period: 000000007fffffff
Feb 20 20:24:05 [2] . fixed-purpose events: 3
Feb 20 20:24:05 [2] . event mask: 00000007000000ff
Feb 20 20:24:05 [2] Freeing SMP alternatives: 12k freed
Feb 20 20:24:05 [2] ACPI: Core revision 20100702
Feb 20 20:24:05 [2] Setting APIC routing to flat
Feb 20 20:24:05 [2] CPU0: Intel(R) Celeron(R) CPU G530 @ 2.40GHz stepping 07
Feb 20 20:24:05 [2] Booting Node 0, Processors #1 Ok.
Feb 20 20:24:05 [2] Brought up 2 CPUs
Feb 20 20:24:05 [2] Total of 2 processors activated (9578.19 BogoMIPS).
Feb 20 20:24:05 [2] NET: Registered protocol family 16
Feb 20 20:24:05 [2] ACPI: bus type pci registered
Feb 20 20:24:05 [2] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Feb 20 20:24:05 [2] PCI: not using MMCONFIG
Feb 20 20:24:05 [2] PCI: Using configuration type 1 for base access
Feb 20 20:24:05 [4] bio: create slab at 0
Feb 20 20:24:05 [1] ACPI: EC: Look up EC in DSDT
Feb 20 20:24:05 [4] ACPI: Executed 1 blocks of module-level executable AML code
Feb 20 20:24:05 [4] ACPI: SSDT 000000007a60ee18 001D8 (v01 AMI IST 00000001 MSFT 03000001)
Feb 20 20:24:05 [4] ACPI: Dynamic OEM Table Load:
Feb 20 20:24:05 [4] ACPI: SSDT (null) 001D8 (v01 AMI IST 00000001 MSFT 03000001)
Feb 20 20:24:05 [4] ACPI: SSDT 000000007a614d98 00054 (v01 AMI CST 00000001 MSFT 03000001)
Feb 20 20:24:05 [4] ACPI: Dynamic OEM Table Load:
Feb 20 20:24:05 [4] ACPI: SSDT (null) 00054 (v01 AMI CST 00000001 MSFT 03000001)
Feb 20 20:24:05 [2] ACPI: Interpreter enabled
Feb 20 20:24:05 [2] ACPI: (supports S0 S5)
Feb 20 20:24:05 [2] ACPI: Using IOAPIC for interrupt routing
Feb 20 20:24:05 [2] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Feb 20 20:24:05 [2] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Feb 20 20:24:05 [3] ACPI: BIOS _OSI(Linux) query ignored
Feb 20 20:24:05 [2] PCI: Using host bridge windows from
Feb 20 20:24:05 [2] ACPI; if necessary, use "pci=nocrs" and report a bug
Feb 20 20:24:05 [2] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Feb 20 20:24:05 [2] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
Feb 20 20:24:05 [2] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
Feb 20 20:24:05 [2] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
Feb 20 20:24:05 [2] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
Feb 20 20:24:05 [2] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Feb 20 20:24:05 [2] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
Feb 20 20:24:05 [2] pci_root PNP0A08:00: host bridge window [mem 0x7f200000-0xffffffff]
Feb 20 20:24:05 [1] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
Feb 20 20:24:05 [1] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
Feb 20 20:24:05 [1] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
Feb 20 20:24:05 [1] pci 0000:00:16.0: reg 10: [mem 0xfbd03000-0xfbd0300f 64bit]
Feb 20 20:24:05 [1] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:00:16.0: PME# disabled
Feb 20 20:24:05 [1] pci 0000:00:1a.0: reg 10: [mem 0xfbd02000-0xfbd023ff]
Feb 20 20:24:05 [1] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:00:1a.0: PME# disabled
Feb 20 20:24:05 [1] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:00:1c.0: PME# disabled
Feb 20 20:24:05 [1] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:00:1c.2: PME# disabled
Feb 20 20:24:05 [1] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:00:1c.4: PME# disabled
Feb 20 20:24:05 [1] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:00:1c.5: PME# disabled
Feb 20 20:24:05 [1] pci 0000:00:1d.0: reg 10: [mem 0xfbd01000-0xfbd013ff]
Feb 20 20:24:05 [1] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:00:1d.0: PME# disabled
Feb 20 20:24:05 [1] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
Feb 20 20:24:05 [1] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
Feb 20 20:24:05 [1] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
Feb 20 20:24:05 [1] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
Feb 20 20:24:05 [1] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
Feb 20 20:24:05 [1] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
Feb 20 20:24:05 [1] pci 0000:00:1f.3: reg 10: [mem 0xfbd00000-0xfbd000ff 64bit]
Feb 20 20:24:05 [1] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
Feb 20 20:24:05 [1] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
Feb 20 20:24:05 [1] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
Feb 20 20:24:05 [1] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
Feb 20 20:24:05 [1] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
Feb 20 20:24:05 [1] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
Feb 20 20:24:05 [1] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
Feb 20 20:24:05 [2] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Feb 20 20:24:05 [1] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
Feb 20 20:24:05 [1] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
Feb 20 20:24:05 [1] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Feb 20 20:24:05 [1] pci 0000:02:00.0: supports D1 D2
Feb 20 20:24:05 [1] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:02:00.0: PME# disabled
Feb 20 20:24:05 [2] pci 0000:00:1c.2: PCI bridge to [bus 02-03] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [mem 0xfb800000-0xfbbfffff]
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [io 0x0000-0x03af] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [io 0x03b0-0x03df] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:00:1c.2: bridge window [mem 0x7f200000-0xffffffff] (subtractive decode)
Feb 20 20:24:05 [1] pci 0000:03:01.0: reg 10: [mem 0xfb900000-0xfb9fffff 64bit]
Feb 20 20:24:05 [1] pci 0000:03:01.0: reg 18: [io 0xe100-0xe1ff]
Feb 20 20:24:05 [1] pci 0000:03:02.0: reg 10: [mem 0xfb800000-0xfb8fffff 64bit]
Feb 20 20:24:05 [1] pci 0000:03:02.0: reg 18: [io 0xe000-0xe0ff]
Feb 20 20:24:05 [2] pci 0000:02:00.0: PCI bridge to [bus 03-03]
Feb 20 20:24:05 [1] pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
Feb 20 20:24:05 [1] pci 0000:02:00.0: bridge window [mem 0xfb800000-0xfbbfffff]
Feb 20 20:24:05 [1] pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Feb 20 20:24:05 [1] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
Feb 20 20:24:05 [1] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0
Feb 20 20:24:05 [2] 004fff 64bit pref]
Feb 20 20:24:05 [1] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
Feb 20 20:24:05 [1] pci 0000:04:00.0: supports D1 D2
Feb 20 20:24:05 [1] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Feb 20 20:24:05 [1] pci 0000:04:00.0: PME# disabled
Feb 20 20:24:05 [2] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
Feb 20 20:24:05 [1] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
Feb 20 20:24:05 [1] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
Feb 20 20:24:05 [1] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
Feb 20 20:24:05 [1] pci 0000:05:00.0: reg 10: [io 0xc040-0xc047]
Feb 20 20:24:05 [1] pci 0000:05:00.0: reg 14: [io 0xc030-0xc033]
Feb 20 20:24:05 [1] pci 0000:05:00.0: reg 18: [io 0xc020-0xc027]
Feb 20 20:24:05 [1] pci 0000:05:00.0: reg 1c: [io 0xc010-0xc013]
Feb 20 20:24:05 [1] pci 0000:05:00.0: reg 20: [io 0xc000-0xc00f]
Feb 20 20:24:05 [1] pci 0000:05:00.0: reg 24: [mem 0xfbc00000-0xfbc001ff]
Feb 20 20:24:05 [2] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
Feb 20 20:24:05 [1] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
Feb 20 20:24:05 [1] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
Feb 20 20:24:05 [1] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Feb 20 20:24:05 [1] pci_bus 0000:00: on NUMA node 0
Feb 20 20:24:05 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 20 20:24:05 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Feb 20 20:24:05 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
Feb 20 20:24:05 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Feb 20 20:24:05 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Feb 20 20:24:05 [2] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Feb 20 20:24:05 [2] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Feb 20 20:24:05 [2] vgaarb: loaded
Feb 20 20:24:05 [2] PCI: Using ACPI for IRQ routing
Feb 20 20:24:05 [1] PCI: pci_cache_line_size set to 64 bytes
Feb 20 20:24:05 [1] reserve RAM buffer: 0000000000099000 - 000000000009ffff
Feb 20 20:24:05 [1] reserve RAM buffer: 000000007a4d6000 - 000000007bffffff
Feb 20 20:24:05 [1] reserve RAM buffer: 000000007a5f9000 - 000000007bffffff
Feb 20 20:24:05 [1] reserve RAM buffer: 000000007a800000 - 000000007bffffff
Feb 20 20:24:05 [1] reserve RAM buffer: 0000000100600000 - 0000000103ffffff
Feb 20 20:24:05 [1]
Feb 20 20:24:05 [1] printing PIC contents
Feb 20 20:24:05 [1] . PIC IMR: ffff
Feb 20 20:24:05 [1] . PIC IRR: 0ca8
Feb 20 20:24:05 [1] . PIC ISR: 0000
Feb 20 20:24:05 [1] . PIC ELCR: 0ca8
Feb 20 20:24:05 [1] printing local APIC contents on CPU#0/0:
Feb 20 20:24:05 [2] . APIC ID: 00000000 (0)
Feb 20 20:24:05 [2] . APIC VERSION: 01060015
Feb 20 20:24:05 [1] . APIC TASKPRI: 00000000 (00)
Feb 20 20:24:05 [1] . APIC PROCPRI: 00000000
Feb 20 20:24:05 [1] . APIC LDR: 01000000
Feb 20 20:24:05 [1] . APIC DFR: ffffffff
Feb 20 20:24:05 [1] . APIC SPIV: 000001ff
Feb 20 20:24:05 [1] . APIC ISR field:
Feb 20 20:24:05 [4] 0000000000000000000000000000000000000000000000000000000000000000
Feb 20 20:24:05 [1] . APIC TMR field:
Feb 20 20:24:05 [4] 0000000000000000000000000000000000000000000000000000000000000000
Feb 20 20:24:05 [1] . APIC IRR field:
Feb 20 20:24:05 [4] 0000000000000000000000000000000000000000000000000000000000000000
Feb 20 20:24:05 [1] . APIC ESR: 00000000
Feb 20 20:24:05 [1] . APIC ICR: 000008fd
Feb 20 20:24:05 [1] . APIC ICR2: 02000000
Feb 20 20:24:05 [1] . APIC LVTT: 000200ef
Feb 20 20:24:05 [1] . APIC LVTPC: 00000400
Feb 20 20:24:05 [1] . APIC LVT0: 00010700
Feb 20 20:24:05 [1] . APIC LVT1: 00000400
Feb 20 20:24:05 [1] . APIC LVTERR: 000000fe
Feb 20 20:24:05 [1] . APIC TMICT: 0000616e
Feb 20 20:24:05 [1] . APIC TMCCT: 000053b9
Feb 20 20:24:05 [1] . APIC TDCR: 00000003
Feb 20 20:24:05 [4]
Feb 20 20:24:05 [1] number of MP IRQ sources: 15.
Feb 20 20:24:05 [1] number of IO-APIC #0 registers: 24.
Feb 20 20:24:05 [2] testing the IO APIC.
Feb 20 20:24:05 [4]
Feb 20 20:24:05 [1] IO APIC #0
Feb 20 20:24:05 [1] register #00: 00000000
Feb 20 20:24:05 [1] . : physical APIC id: 00
Feb 20 20:24:05 [1] . : Delivery Type: 0
Feb 20 20:24:05 [1] . : LTS : 0
Feb 20 20:24:05 [1] register #01: 00170020
Feb 20 20:24:05 [1] . : max redirection entries: 0017
Feb 20 20:24:05 [1] . : PRQ implemented: 0
Feb 20 20:24:05 [1] . : IO APIC version: 0020
Feb 20 20:24:05 [1] IRQ redirection table:
Feb 20 20:24:05 [1] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
Feb 20 20:24:05 [1] 00 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 01 003 0 0 0 0 0 1 1 31
Feb 20 20:24:05 [1] 02 003 0 0 0 0 0 1 1 30
Feb 20 20:24:05 [1] 03 003 0 0 0 0 0 1 1 33
Feb 20 20:24:05 [1] 04 003 0 0 0 0 0 1 1 34
Feb 20 20:24:05 [1] 05 003 0 0 0
Feb 20 20:24:05 [2] 0 0 1 1 35
Feb 20 20:24:05 [1] 06 003 0 0 0 0 0 1 1 36
Feb 20 20:24:05 [1] 07 003 0 0 0 0 0 1 1 37
Feb 20 20:24:05 [1] 08 003 0 0 0 0 0 1 1 38
Feb 20 20:24:05 [1] 09 003 0 1 0 0 0 1 1 39
Feb 20 20:24:05 [1] 0a 003 0 0 0 0 0 1 1 3A
Feb 20 20:24:05 [1] 0b 003 0 0 0 0 0 1 1 3B
Feb 20 20:24:05 [1] 0c 003 0 0 0 0 0 1 1 3C
Feb 20 20:24:05 [1] 0d 003 0 0 0 0 0 1 1 3D
Feb 20 20:24:05 [1] 0e 003 0 0 0 0 0 1 1 3E
Feb 20 20:24:05 [1] 0f 003 0 0 0 0 0 1 1 3F
Feb 20 20:24:05 [1] 10 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 11 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 12 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 13 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 14 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 15 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 16 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] 17 000 1 0 0 0 0 0 0 00
Feb 20 20:24:05 [1] IRQ to pin mappings:
Feb 20 20:24:05 [1] IRQ0 -> 0:2
Feb 20 20:24:05 [1] IRQ1 -> 0:1
Feb 20 20:24:05 [1] IRQ3 -> 0:3
Feb 20 20:24:05 [1] IRQ4 -> 0:4
Feb 20 20:24:05 [1] IRQ5 -> 0:5
Feb 20 20:24:05 [1] IRQ6 -> 0:6
Feb 20 20:24:05 [1] IRQ7 -> 0:7
Feb 20 20:24:05 [1] IRQ8 -> 0:8
Feb 20 20:24:05 [1] IRQ9 -> 0:9
Feb 20 20:24:05 [1] IRQ10 -> 0:10
Feb 20 20:24:05 [1] IRQ11 -> 0:11
Feb 20 20:24:05 [1] IRQ12 -> 0:12
Feb 20 20:24:05 [1] IRQ13 -> 0:13
Feb 20 20:24:05 [1] IRQ14 -> 0:14
Feb 20 20:24:05 [1] IRQ15 -> 0:15
Feb 20 20:24:05 [2] done.
Feb 20 20:24:05 [2] Switching to clocksource tsc
Feb 20 20:24:05 [2] pnp: PnP ACPI init
Feb 20 20:24:05 [2] ACPI: bus type pnp registered
Feb 20 20:24:05 [2] pnp: PnP ACPI: found 13 devices
Feb 20 20:24:05 [2] ACPI: ACPI bus type pnp unregistered
Feb 20 20:24:05 [2] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
Feb 20 20:24:05 [2] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
Feb 20 20:24:05 [2] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
Feb 20 20:24:05 [2] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
Feb 20 20:24:05 [2] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
Feb 20 20:24:05 [2] system 00:02: [io 0x0a00-0x0a1f] has been reserved
Feb 20 20:24:05 [2] system 00:02: [io 0x0a30-0x0a3f] has been reserved
Feb 20 20:24:05 [2] system 00:08: [io 0x04d0-0x04d1] has been reserved
Feb 20 20:24:05 [2] system 00:0a: [io 0x0400-0x0453] has been reserved
Feb 20 20:24:05 [2] system 00:0a: [io 0x0458-0x047f] has been reserved
Feb 20 20:24:05 [2] system 00:0a: [io 0x1180-0x119f] has been reserved
Feb 20 20:24:05 [2] system 00:0a: [io 0x0500-0x057f] has been reserved
Feb 20 20:24:05 [2] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
Feb 20 20:24:05 [2] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
Feb 20 20:24:05 [2] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
Feb 20 20:24:05 [2] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
Feb 20 20:24:05 [2] system 00:0b: [io 0x0454-0x0457] has been reserved
Feb 20 20:24:05 [2] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Feb 20 20:24:05 [2] pci 0000:00:1c.0: bridge window [io disabled]
Feb 20 20:24:05 [2] pci 0000:00:1c.0: bridge window [mem disabled]
Feb 20 20:24:05 [2] pci 0000:00:1c.0: bridge window [mem pref disabled]
Feb 20 20:24:05 [2] pci 0000:02:00.0: PCI bridge to [bus 03-03]
Feb 20 20:24:05 [2] pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
Feb 20 20:24:05 [2] pci 0000:02:00.0: bridge window [mem 0xfb800000-0xfbbfffff]
Feb 20 20:24:05 [2] pci 0000:02:00.0: bridge window [mem pref disabled]
Feb 20 20:24:05 [2] pci 0000:00:1c.2: PCI bridge to [bus 02-03]
Feb 20 20:24:05 [2] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
Feb 20 20:24:05 [2] pci 0000:00:1c.2: bridge window [mem 0xfb800000-0xfbbfffff]
Feb 20 20:24:05 [2] pci 0000:00:1c.2: bridge window [mem pref disabled]
Feb 20 20:24:05 [2] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
Feb 20 20:24:05 [2] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
Feb 20 20:24:05 [2] pci 0000:00:1c.4: bridge window [mem disabled]
Feb 20 20:24:05 [2] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
Feb 20 20:24:05 [2] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
Feb 20 20:24:05 [2] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
Feb 20 20:24:05 [2] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
Feb 20 20:24:05 [2] pci 0000:00:1c.5: bridge window [mem pref disabled]
Feb 20 20:24:05 [2] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 20 20:24:05 [1] pci 0000:00:1c.0: setting latency timer to 64
Feb 20 20:24:05 [2] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 20 20:24:05 [1] pci 0000:00:1c.2: setting latency timer to 64
Feb 20 20:24:05 [2] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Feb 20 20:24:05 [1] pci 0000:02:00.0: setting latency timer to 64
Feb 20 20:24:05 [2] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 20 20:24:05 [1] pci 0000:00:1c.4: setting latency timer to 64
Feb 20 20:24:05 [2] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Feb 20 20:24:05 [1] pci 0000:00:1c.5: setting latency timer to 64
Feb 20 20:24:05 [1] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
Feb 20 20:24:05 [1] pci_bus 0
Feb 20 20:24:05 [2] 000:00: resource 5 [io 0x03e0-0x0cf7]
Feb 20 20:24:05 [1] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
Feb 20 20:24:05 [1] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
Feb 20 20:24:05 [1] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
Feb 20 20:24:05 [1] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
Feb 20 20:24:05 [1] pci_bus 0000:00: resource 10 [mem 0x7f200000-0xffffffff]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 1 [mem 0xfb800000-0xfbbfffff]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
Feb 20 20:24:05 [1] pci_bus 0000:02: resource 10 [mem 0x7f200000-0xffffffff]
Feb 20 20:24:05 [1] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
Feb 20 20:24:05 [1] pci_bus 0000:03: resource 1 [mem 0xfb800000-0xfbbfffff]
Feb 20 20:24:05 [1] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
Feb 20 20:24:05 [1] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
Feb 20 20:24:05 [1] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
Feb 20 20:24:05 [1] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
Feb 20 20:24:05 [2] NET: Registered protocol family 2
Feb 20 20:24:05 [2] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Feb 20 20:24:05 [2] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Feb 20 20:24:05 [2] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Feb 20 20:24:05 [2] TCP: Hash tables configured (established 262144 bind 65536)
Feb 20 20:24:05 [2] TCP reno registered
Feb 20 20:24:05 [2] UDP hash table entries: 1024 (order: 3, 32768 bytes)
Feb 20 20:24:05 [2] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Feb 20 20:24:05 [2] NET: Registered protocol family 1
Feb 20 20:24:05 [2] RPC: Registered udp transport module.
Feb 20 20:24:05 [2] RPC: Registered tcp transport module.
Feb 20 20:24:05 [2] RPC: Registered tcp NFSv4.1 backchannel transport module.
Feb 20 20:24:05 [1] pci 0000:00:02.0: Boot video device
Feb 20 20:24:05 [1] PCI: CLS mismatch (64 != 1020), using 64 bytes
Feb 20 20:24:05 [2] Trying to unpack rootfs image as initramfs.
Feb 20 20:24:05 [2] rootfs image is not initramfs (decompressor failed); looks like an initrd
Feb 20 20:24:05 [2] Freeing initrd memory: 9616k freed
Feb 20 20:24:05 [2] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Feb 20 20:24:05 [2] Placing 64MB software IO TLB between ffff880003a00000 - ffff880007a00000
Feb 20 20:24:05 [2] software IO TLB at phys 0x3a00000 - 0x7a00000
Feb 20 20:24:05 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb 20 20:24:05 [2] msgmni has been set to 3716
Feb 20 20:24:05 [2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Feb 20 20:24:05 [2] io scheduler noop registered (default)
Feb 20 20:24:05 [2] brd: module loaded
Feb 20 20:24:05 [2] loop: module loaded
Feb 20 20:24:05 [2] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Feb 20 20:24:05 [2] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 20 20:24:05 [2] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 20 20:24:05 [2] mice: PS/2 mouse device common for all mice
Feb 20 20:24:05 [2] cpuidle: using governor ladder
Feb 20 20:24:05 [2] TCP cubic registered
Feb 20 20:24:05 [2] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Feb 20 20:24:05 [3] RAMDISK: CORE3 root image found at block 0
Feb 20 20:24:05 [4] VFS: Mounted root (ext2 filesystem) on device 1:0.
Feb 20 20:24:05 [2] Freeing unused kernel memory: 396k freed
Feb 20 20:24:08 [2] floppy0: no floppy controllers found
Feb 20 20:24:09 [2] rtc_cmos 00:06: RTC can wake from S4
Feb 20 20:24:09 [2] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Feb 20 20:24:09 [2] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Feb 20 20:24:11 [2] input: PC Speaker as /devices/platform/pcspkr/input/input1
Feb 20 20:24:11 [1] ACPI: acpi_idle registered with cpuidle
Feb 20 20:24:11 [1] Monitor-Mwait will be used to enter C-3 state
Feb 20 20:24:11 [2] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Feb 20 20:24:11 [2] ACPI: Power Button [PWRB]
Feb 20 20:24:11 [2] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Feb 20 20:24:11 [2] ACPI: Power Button [PWRF]
Feb 20 20:24:11 [2] usbcore: registered new interface driver usbfs
Feb 20 20:24:11 [2] usbcore: registered new interface driver hub
Feb 20 20:24:11 [2] usbcore: registered new device driver usb
Feb 20 20:24:11 [2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 20 20:24:11 [1] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1a.0: debug port 2
Feb 20 20:24:11 [1] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbd02000
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Feb 20 20:24:11 [2] hub 1-0:1.0: USB hub found
Feb 20 20:24:11 [2] hub 1-0:1.0: 2 ports detected
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Feb 20 20:24:11 [1] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1d.0: debug port 2
Feb 20 20:24:11 [1] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbd01000
Feb 20 20:24:11 [2] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Feb 20 20:24:11 [2] hub 2-0:1.0: USB hub found
Feb 20 20:24:11 [2] hub 2-0:1.0: 2 ports detected
Feb 20 20:24:11 [2] sc92031 0000:03:00.0: PCI INT ? -> GSI 16 (level, low) -> IRQ 16
Feb 20 20:24:11 [2] sc92031 0000:03:00.0: PCI INT ? disabled
Feb 20 20:24:11 [4] sc92031: probe of 0000:03:00.0 failed with error -5
Feb 20 20:24:11 [3] SCSI subsystem initialized
Feb 20 20:24:11 [1] libata version 3.00 loaded.
Feb 20 20:24:11 [2] sata_mv 0000:03:01.0: version 1.28
Feb 20 20:24:11 [2] sata_mv 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Feb 20 20:24:11 [2] sata_mv 0000:03:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Feb 20 20:24:11 [2] scsi0 : sata_mv
Feb 20 20:24:11 [2] scsi1 : sata_mv
Feb 20 20:24:11 [2] scsi2 : sata_mv
Feb 20 20:24:11 [2] scsi3 : sata_mv
Feb 20 20:24:11 [2] ata1: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb922000 irq 19
Feb 20 20:24:11 [2] ata2: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb924000 irq 19
Feb 20 20:24:11 [2] ata3: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb926000 irq 19
Feb 20 20:24:11 [2] ata4: SATA max UDMA/133 mmio m1048576@0xfb900000 port 0xfb928000 irq 19
Feb 20 20:24:11 [2] sata_mv 0000:03:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 20 20:24:11 [2] sata_mv 0000:03:02.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Feb 20 20:24:11 [2] scsi4 : sata_mv
Feb 20 20:24:11 [2] scsi5 : sata_mv
Feb 20 20:24:11 [2] scsi6 : sata_mv
Feb 20 20:24:11 [2] scsi7 : sata_mv
Feb 20 20:24:11 [2] ata5: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb822000 irq 16
Feb 20 20:24:11 [2] ata6: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb824000 irq 16
Feb 20 20:24:11 [2] ata7: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb826000 irq 16
Feb 20 20:24:11 [2] ata8: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb828000 irq 16
Feb 20 20:24:11 [2] usb 1-1: new high speed USB device using ehci_hcd and address 2
Feb 20 20:24:11 [2] hub 1-1:1.0: USB hub found
Feb 20 20:24:11 [2] hub 1-1:1.0: 4 ports detected
Feb 20 20:24:11 [2] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:11 [2] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:11 [2] usb 2-1: new high speed USB device using ehci_hcd and address 2
Feb 20 20:24:11 [2] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Feb 20 20:24:11 [2] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 20 20:24:11 [2] ata1.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Feb 20 20:24:11 [2] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 20 20:24:11 [2] ata5.00: configured for UDMA/133
Feb 20 20:24:11 [2] ata1.00: configured for UDMA/133
Feb 20 20:24:11 [3] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Feb 20 20:24:11 [2] hub 2-1:1.0: USB hub found
Feb 20 20:24:11 [2] hub 2-1:1.0: 6 ports detected
Feb 20 20:24:11 [2] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
Feb 20 20:24:12 [2] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
Feb 20 20:24:12 [2] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:12 [2] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Feb 20 20:24:12 [2] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 20 20:24:13 [2] ata2.00: configured for UDMA/133
Feb 20 20:24:13 [3] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Feb 20 20:24:13 [2] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:13 [2] ata3.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Feb 20 20:24:13 [2] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 20 20:24:13 [2] ata3.00: configured for UDMA/133
Feb 20 20:24:13 [3] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Feb 20 20:24:13 [2] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:14 [2] ata4.00: ATA-8: ST2000DL003-9VT166, CC98, max UDMA/133
Feb 20 20:24:14 [2] ata4.00: 3907029168 sectors, multi 0: LBA48
Feb 20 20:24:14 [2] ata4.00: configured for UDMA/133
Feb 20 20:24:14 [3] scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC98 PQ: 0 ANSI: 5
Feb 20 20:24:14 [3] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Feb 20 20:24:14 [2] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:14 [2] ata6.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Feb 20 20:24:14 [2] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 20 20:24:14 [2] ata6.00: configured for UDMA/133
Feb 20 20:24:14 [3] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Feb 20 20:24:15 [2] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:15 [2] ata7.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Feb 20 20:24:15 [2] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 20 20:24:15 [2] ata7.00: configured for UDMA/133
Feb 20 20:24:15 [3] scsi 6:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Feb 20 20:24:15 [2] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:15 [2] ata8.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
Feb 20 20:24:15 [2] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Feb 20 20:24:15 [2] ata8.00: configured for UDMA/133
Feb 20 20:24:15 [3] scsi 7:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
Feb 20 20:24:15 [2] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Feb 20 20:24:15 [2] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 20 20:24:15 [1] r8169 0000:04:00.0: setting latency timer to 64
Feb 20 20:24:15 [3] r8169 0000:04:00.0: (unregistered net_device): unknown MAC, using family default
Feb 20 20:24:15 [2] r8169 0000:04:00.0: no MSI. Back to INTx.
Feb 20 20:24:15 [2] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000058000, 8c:89:a5:29:cb:ae, XID 0c900800 IRQ 16
Feb 20 20:24:15 [2] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 20 20:24:15 [1] pata_acpi 0000:00:1f.2: setting latency timer to 64
Feb 20 20:24:15 [2] pata_acpi 0000:00:1f.2: PCI INT B disabled
Feb 20 20:24:15 [2] pata_acpi 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 20 20:24:15 [1] pata_acpi 0000:00:1f.5: setting latency timer to 64
Feb 20 20:24:15 [2] pata_acpi 0000:00:1f.5: PCI INT B disabled
Feb 20 20:24:15 [2] pata_acpi 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 20 20:24:15 [1] pata_acpi 0000:05:00.0: setting latency timer to 64
Feb 20 20:24:15 [2] pata_acpi 0000:05:00.0: PCI INT A disabled
Feb 20 20:24:15 [1] ata_piix 0000:00:1f.2: version 2.13
Feb 20 20:24:15 [2] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 20 20:24:15 [2] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Feb 20 20:24:16 [1] ata_piix 0000:00:1f.2: setting latency timer to 64
Feb 20 20:24:16 [2] scsi8 : ata_piix
Feb 20 20:24:16 [2] scsi9 : ata_piix
Feb 20 20:24:16 [2] ata9: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
Feb 20 20:24:16 [2] ata10: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
Feb 20 20:24:16 [2] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Feb 20 20:24:16 [2] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Feb 20 20:24:16 [1] ata_piix 0000:00:1f.5: setting latency timer to 64
Feb 20 20:24:16 [2] scsi10 : ata_piix
Feb 20 20:24:16 [2] scsi11 : ata_piix
Feb 20 20:24:16 [2] ata11: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
Feb 20 20:24:16 [2] ata12: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
Feb 20 20:24:16 [2] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:16 [2] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:16 [2] ata11.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Feb 20 20:24:16 [2] ata11.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 20 20:24:16 [2] ata12.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Feb 20 20:24:16 [2] ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 20 20:24:16 [2] ata11.00: configured for UDMA/133
Feb 20 20:24:16 [2] ata12.00: configured for UDMA/133
Feb 20 20:24:17 [5] ata10.01: failed to resume link (SControl 0)
Feb 20 20:24:17 [5] ata9.01: failed to resume link (SControl 0)
Feb 20 20:24:17 [2] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:17 [2] ata9.01: SATA link down (SStatus 0 SControl 0)
Feb 20 20:24:17 [2] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 20 20:24:17 [2] ata10.01: SATA link down (SStatus 0 SControl 0)
Feb 20 20:24:17 [2] ata10.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Feb 20 20:24:17 [2] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 20 20:24:17 [2] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 50.0AB50, max UDMA/133
Feb 20 20:24:17 [2] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 20 20:24:17 [2] ata10.00: configured for UDMA/133
Feb 20 20:24:17 [2] ata9.00: configured for UDMA/133
Feb 20 20:24:17 [3] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARS-00M 50.0 PQ: 0 ANSI: 5
Feb 20 20:24:17 [3] scsi 9:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Feb 20 20:24:17 [3] scsi 10:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Feb 20 20:24:17 [3] scsi 11:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Feb 20 20:24:18 [2] Initializing USB Mass Storage driver.
Feb 20 20:24:18 [2] scsi12 : usb-storage 1-1.1:1.0
Feb 20 20:24:18 [2] scsi13 : usb-storage 1-1.2:1.0
Feb 20 20:24:18 [2] usbcore: registered new interface driver usb-storage
Feb 20 20:24:18 [2] USB Mass Storage support registered.
Feb 20 20:24:18 [3] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 0:0:0:0: [sda] Write Protect is off
Feb 20 20:24:18 [1] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 1:0:0:0: [sdb] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 1:0:0:0: [sdb] Write Protect is off
Feb 20 20:24:18 [1] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 2:0:0:0: [sdc] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 2:0:0:0: [sdc] Write Protect is off
Feb 20 20:24:18 [1] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 3:0:0:0: [sdd] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 3:0:0:0: [sdd] Write Protect is off
Feb 20 20:24:18 [1] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 4:0:0:0: [sde] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 4:0:0:0: [sde] Write Protect is off
Feb 20 20:24:18 [1] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 5:0:0:0: [sdf] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 5:0:0:0: [sdf] Write Protect is off
Feb 20 20:24:18 [1] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 6:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 6:0:0:0: [sdg] Write Protect is off
Feb 20 20:24:18 [1] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 7:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 7:0:0:0: [sdh] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 7:0:0:0: [sdh] Write Protect is off
Feb 20 20:24:18 [1] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 8:0:0:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 8:0:0:0: [sdi] Write Protect is off
Feb 20 20:24:18 [1] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 9:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 9:0:0:0: [sdj] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 9:0:0:0: [sdj] Write Protect is off
Feb 20 20:24:18 [1] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 10:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 10:0:0:0: [sdk] Write Protect is off
Feb 20 20:24:18 [1] sd 10:0:0:0: [sdk] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 10:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [3] sd 11:0:0:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Feb 20 20:24:18 [3] sd 11:0:0:0: [sdl] 4096-byte physical blocks
Feb 20 20:24:18 [3] sd 11:0:0:0: [sdl] Write Protect is off
Feb 20 20:24:18 [1] sd 11:0:0:0: [sdl] Mode Sense: 00 3a 00 00
Feb 20 20:24:18 [3] sd 11:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 20 20:24:18 [2] sdb: sdb1
Feb 20 20:24:18 [3] sd 1:0:0:0: [sdb] Attached SCSI disk
Feb 20 20:24:18 [2] sdg: sdg1
Feb 20 20:24:18 [3] sd 6:0:0:0: [sdg] Attached SCSI disk
Feb 20 20:24:18 [2] sdd: sdd1
Feb 20 20:24:18 [3] sd 3:0:0:0: [sdd] Attached SCSI disk
Feb 20 20:24:18 [2] sdh: sdh1
Feb 20 20:24:18 [3] sd 7:0:0:0: [sdh] Attached SCSI disk
Feb 20 20:24:19 [2] sda: unknown partition table
Feb 20 20:24:19 [3] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 20 20:24:19 [2] sdi: sdi1
Feb 20 20:24:19 [3] sd 8:0:0:0: [sdi] Attached SCSI disk
Feb 20 20:24:19 [2] sdk: sdk1
Feb 20 20:24:19 [3] sd 10:0:0:0: [sdk] Attached SCSI disk
Feb 20 20:24:19 [2] sdc: sdc1
Feb 20 20:24:19 [3] sd 2:0:0:0: [sdc] Attached SCSI disk
Feb 20 20:24:19 [2] sdj: sdj1
Feb 20 20:24:19 [3] sd 9:0:0:0: [sdj] Attached SCSI disk
Feb 20 20:24:19 [2] sdl: sdl1
Feb 20 20:24:19 [3] sd 11:0:0:0: [sdl] Attached SCSI disk
Feb 20 20:24:19 [2] sdf: sdf1
Feb 20 20:24:19 [3] sd 5:0:0:0: [sdf] Attached SCSI disk
Feb 20 20:24:19 [2] sde: sde1
Feb 20 20:24:19 [3] sd 4:0:0:0: [sde] Attached SCSI disk
Feb 20 20:24:19 [3] scsi 12:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208DB TS01 PQ: 0 ANSI: 0
Feb 20 20:24:19 [3] scsi 13:0:0:0: Direct-Access USBDisk RunDisk 1.00 PQ: 0 ANSI: 2
Feb 20 20:24:19 [3] sd 13:0:0:0: [sdm] 2014656 512-byte logical blocks: (1.03 GB/983 MiB)
Feb 20 20:24:19 [3] sd 13:0:0:0: [sdm] Write Protect is off
Feb 20 20:24:19 [1] sd 13:0:0:0: [sdm] Mode Sense: 0b 00 00 08
Feb 20 20:24:19 [5] sd 13:0:0:0: [sdm] Assuming drive cache: write through
Feb 20 20:24:19 [5] sd 13:0:0:0: [sdm] Assuming drive cache: write through
Feb 20 20:24:19 [2] sdm: sdm1 sdm2
Feb 20 20:24:19 [5] sd 13:0:0:0: [sdm] Assuming drive cache: write through
Feb 20 20:24:19 [3] sd 13:0:0:0: [sdm] Attached SCSI removable disk
Feb 20 20:24:20 [4] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Feb 20 20:24:20 [2] cdrom: Uniform CD-ROM driver Revision: 3.20
Feb 20 20:24:20 [1] sr 12:0:0:0: Attached scsi CD-ROM sr0
Feb 20 20:25:22 [2] r8169 0000:04:00.0: eth0: link up
Feb 20 20:25:22 [2] r8169 0000:04:00.0: eth0: link up
Feb 20 20:38:02 [5] irq 16: nobody cared (try booting with the "irqpoll" option)
Feb 20 20:38:02 [4] Pid: 0, comm: swapper Not tainted 2.6.36.4.CORE3 #1
Feb 20 20:38:02 [4] Call Trace:
Feb 20 20:38:02 [4] [] ? __report_bad_irq+0x30/0x7d
Feb 20 20:38:02 [4] [] ? note_interrupt+0x105/0x151
Feb 20 20:38:02 [4] [] ? handle_fasteoi_irq+0x95/0xb5
Feb 20 20:38:02 [4] [] ? handle_irq+0x17/0x20
Feb 20 20:38:02 [4] [] ? do_IRQ+0x57/0xbd
Feb 20 20:38:02 [4] [] ? ret_from_intr+0x0/0xa
Feb 20 20:38:02 [4] [] ? delay_tsc+0x0/0x4b
Feb 20 20:38:02 [4] [] ? acpi_idle_enter_bm+0x231/0x266 [processor]
Feb 20 20:38:02 [4] [] ? acpi_idle_enter_bm+0x22c/0x266 [processor]
Feb 20 20:38:02 [4] [] ? pm_qos_request+0x58/0x5c
Feb 20 20:38:02 [4] [] ? cpuidle_idle_call+0x96/0xcd
Feb 20 20:38:02 [4] [] ? cpu_idle+0x49/0x60
Feb 20 20:38:02 [4] [] ? start_kernel+0x32a/0x336
Feb 20 20:38:02 [4] [] ? x86_64_start_kernel+0xed/0xf1
Feb 20 20:38:02 [5] handlers:
Feb 20 20:38:02 [5] [] (usb_hcd_irq+0x0/0x5f [usbcore])
Feb 20 20:38:02 [5] [] (mv_interrupt+0x0/0x71f [sata_mv])
Feb 20 20:38:02 [5] [] (rtl8169_interrupt+0x0/0x261 [r8169])
Feb 20 20:38:02 [8] Disabling IRQ #16
Feb 20 20:39:06 [2] usb 1-1.1: USB disconnect, address 3
Feb 20 22:12:29 [2] EXT3-fs: barriers not enabled
Feb 20 22:12:29 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:12:29 [2] EXT3-fs (sdb1): using internal journal
Feb 20 22:12:29 [2] EXT3-fs (sdb1): mounted filesystem with writeback data mode
Feb 20 22:12:29 [2] EXT3-fs: barriers not enabled
Feb 20 22:12:29 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:12:29 [2] EXT3-fs (sdk1): using internal journal
Feb 20 22:12:29 [2] EXT3-fs (sdk1): mounted filesystem with writeback data mode
Feb 20 22:12:30 [2] EXT3-fs: barriers not enabled
Feb 20 22:12:30 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:12:30 [2] EXT3-fs (sdl1): using internal journal
Feb 20 22:12:30 [2] EXT3-fs (sdl1): mounted filesystem with writeback data mode
Feb 20 22:12:30 [2] EXT3-fs: barriers not enabled
Feb 20 22:12:30 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:12:30 [2] EXT3-fs (sdc1): using internal journal
Feb 20 22:12:30 [2] EXT3-fs (sdc1): mounted filesystem with writeback data mode
Feb 20 22:12:30 [2] EXT3-fs: barriers not enabled
Feb 20 22:12:30 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:12:30 [2] EXT3-fs (sdd1): using internal journal
Feb 20 22:12:30 [2] EXT3-fs (sdd1): mounted filesystem with writeback data mode
Feb 20 22:12:43 [2] EXT3-fs: barriers not enabled
Feb 20 22:12:43 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:12:43 [2] EXT3-fs (sde1): using internal journal
Feb 20 22:12:43 [2] EXT3-fs (sde1): mounted filesystem with writeback data mode
Feb 20 22:12:56 [2] EXT3-fs: barriers not enabled
Feb 20 22:12:56 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:12:56 [2] EXT3-fs (sdf1): using internal journal
Feb 20 22:12:56 [2] EXT3-fs (sdf1): mounted filesystem with writeback data mode
Feb 20 22:13:10 [2] EXT3-fs: barriers not enabled
Feb 20 22:13:10 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:13:10 [2] EXT3-fs (sdg1): using internal journal
Feb 20 22:13:10 [2] EXT3-fs (sdg1): mounted filesystem with writeback data mode
Feb 20 22:13:23 [2] EXT3-fs: barriers not enabled
Feb 20 22:13:23 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:13:23 [2] EXT3-fs (sdh1): using internal journal
Feb 20 22:13:23 [2] EXT3-fs (sdh1): mounted filesystem with writeback data mode
Feb 20 22:13:24 [2] EXT3-fs: barriers not enabled
Feb 20 22:13:24 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:13:24 [2] EXT3-fs (sdi1): using internal journal
Feb 20 22:13:24 [2] EXT3-fs (sdi1): mounted filesystem with writeback data mode
Feb 20 22:13:24 [2] EXT3-fs: barriers not enabled
Feb 20 22:13:24 [2] kjournald starting. Commit interval 5 seconds
Feb 20 22:13:24 [2] EXT3-fs (sdj1): using internal journal
Feb 20 22:13:24 [2] EXT3-fs (sdj1): mounted filesystem with writeback data mode

Top

markle123

Post subject: Re: New upgrade and IRQ question

Posted: Fri Feb 21, 2014 2:54 am

Joined: Wed Oct 05, 2011 12:00 am
Posts: 61

Just got another IRQ on 19. Can't connect to server :/ Rebooting it now.

Feb 21 12:33:12 [5] irq 19: nobody cared (try booting with the "irqpoll" option)
Feb 21 12:33:12 [4] Pid: 0, comm: swapper Not tainted 2.6.36.4.CORE3 #1
Feb 21 12:33:12 [4] Call Trace:
Feb 21 12:33:12 [4] [] ? __report_bad_irq+0x30/0x7d
Feb 21 12:33:12 [4] [] ? note_interrupt+0x105/0x151
Feb 21 12:33:12 [4] [] ? handle_fasteoi_irq+0x95/0xb5
Feb 21 12:33:12 [4] [] ? handle_irq+0x17/0x20
Feb 21 12:33:12 [4] [] ? do_IRQ+0x57/0xbd
Feb 21 12:33:12 [4] [] ? ret_from_intr+0x0/0xa
Feb 21 12:33:12 [4] [] ? udp_poll+0x0/0x3d
Feb 21 12:33:12 [4] [] ? acpi_idle_enter_bm+0x231/0x266 [processor]
Feb 21 12:33:12 [4] [] ? acpi_idle_enter_bm+0x22c/0x266 [processor]
Feb 21 12:33:12 [4] [] ? pm_qos_request+0x58/0x5c
Feb 21 12:33:12 [4] [] ? cpuidle_idle_call+0x96/0xcd
Feb 21 12:33:12 [4] [] ? cpu_idle+0x49/0x60
Feb 21 12:33:12 [4] [] ? start_kernel+0x32a/0x336
Feb 21 12:33:12 [4] [] ? x86_64_start_kernel+0xed/0xf1
Feb 21 12:33:12 [5] handlers:
Feb 21 12:33:12 [5] [] (mv_interrupt+0x0/0x71f [sata_mv])
Feb 21 12:33:12 [5] [] (ata_bmdma_interrupt+0x0/0x17a [libata])
Feb 21 12:33:12 [8] Disabling IRQ #19

Top

mikeiver1

Post subject: Re: New upgrade and IRQ question

Posted: Fri Feb 21, 2014 2:51 pm

Joined: Sun Apr 02, 2006 9:05 pm
Posts: 1688
Location: Up State NY in the USA!!!!

So what are the specs of the machine you are using and the make of the MB? Have you upgraded the BIOS yet? Have you tried doing a reset of the BIOS and turning off all the on board devices that are not needed? Have you tried to move the NIC to a different slot?

Give us this info for starters and try the above and see if the issues abate.

Mike

Top

Page 1 of 4

[ 49 posts ]

Go to page 1, 2, 3, 4 Next

Board index » v1.x NASLite M2 » NASLite-M2

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum