Can anyone explain what is happening here?
0 - Disk-0, DEVICE-SDA, HOST-0, BUS-0, TARGET-0, LUN-0 * - Disk-1, DEVICE-SDB, HOST-1, BUS-0, TARGET-0, LUN-0 (Interestingly, this drive is accessible through shares -Shows up as Disk-1 with all files intact and accessible through Windows) 10 - Disk-10, DEVICE-SDK, HOST-2, BUS-0, TARGET-0, LUN-0 11 - Disk-11, DEVICE-SDL, HOST-3, BUS-0, TARGET-0, LUN-0 * - Disk-12, DEVICE-SDM, HOST-6, BUS-0, TARGET-0, LUN-0 (BOOT/CONFIG device) 2 - Disk-2, DEVICE-SDC, HOST-2, BUS-0, TARGET-0, LUN-0 3 - Disk-3, DEVICE-SDD, HOST-3, BUS-0, TARGET-0, LUN-0 4 - Disk-4, DEVICE-SDE, HOST-4, BUS-0, TARGET-0, LUN-0 5 - Disk-5, DEVICE-SDF, HOST-5, BUS-0, TARGET-0, LUN-0 6 - Disk-6, DEVICE-SDG, HOST-6, BUS-0, TARGET-0, LUN-0 7 - Disk-7, DEVICE-SDH, HOST-7, BUS-0, TARGET-0, LUN-0 8 - Disk-8, DEVICE-SDI, HOST-8, BUS-0, TARGET-0, LUN-0 9 - Disk-9, DEVICE-SDJ, HOST-9, BUS-0, TARGET-0, LUN-0
Why would Disk-1 be starred out from the Storage Configuration Menu? How do I access the configuration menu for Disk-1? What am I misunderstanding here?
Attachments: |
![putty NASLITE.png](./download/file.php?id=213&sid=1fe40611a4ba6dff8a24770ce90d3fcc)
putty NASLITE.png [ 48.49 KiB | Viewed 13606 times ]
|
|