NASLite Network Attached Storage

Hi,

I've installed a new 2TB disk as Disk-1, rebooted, formatted, rebooted again and the thing doesn't show up as an accessible drive.
Repeatedly reformatting and rebooting still doesn't make the drive accessible.

I'm a bit befuddled by this. Why am I able to format, but not access the formatted drive after rebooting???

Any help/ideas would be appreciated.

Mark.

System Message Log:

Aug 1 00:05:56 [3] klogd started: BusyBox v1.12.1 (2009-11-19 21:21:30 UTC)
Aug 1 00:05:56 [3] Linux version 2.6.30.3.CORE3 (root@DevBox) (gcc version 4.1.2 (SE 4.1.2 p1.0.2)) #1 Wed Jul 14 01:02:59 UTC 2010
Aug 1 00:05:56 [2] KERNEL supported cpus:
Aug 1 00:05:56 [2] Intel GenuineIntel
Aug 1 00:05:56 [2] AMD AuthenticAMD
Aug 1 00:05:56 [2] NSC Geode by NSC
Aug 1 00:05:56 [2] Cyrix CyrixInstead
Aug 1 00:05:56 [2] Centaur CentaurHauls
Aug 1 00:05:56 [2] Transmeta GenuineTMx86
Aug 1 00:05:56 [2] Transmeta TransmetaCPU
Aug 1 00:05:56 [2] UMC UMC UMC UMC
Aug 1 00:05:56 [2] BIOS-provided physical RAM map:
Aug 1 00:05:56 [2] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 1 00:05:56 [2] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 1 00:05:56 [2] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Aug 1 00:05:56 [2] BIOS-e820: 0000000000100000 - 000000004ef2fc00 (usable)
Aug 1 00:05:56 [2] BIOS-e820: 000000004ef2fc00 - 000000004ef30000 (ACPI NVS)
Aug 1 00:05:56 [2] BIOS-e820: 000000004ef30000 - 000000004ef40000 (ACPI data)
Aug 1 00:05:56 [2] BIOS-e820: 000000004ef40000 - 000000004eff0000 (ACPI NVS)
Aug 1 00:05:56 [2] BIOS-e820: 000000004eff0000 - 000000004f000000 (reserved)
Aug 1 00:05:56 [2] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
Aug 1 00:05:56 [2] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
Aug 1 00:05:56 [2] DMI 2.3 present.
Aug 1 00:05:56 [2] last_pfn = 0x4ef2f max_arch_pfn = 0x100000
Aug 1 00:05:56 [2] init_memory_mapping: 0000000000000000-00000000377fe000
Aug 1 00:05:56 [1] 0000000000 - 0000400000 page 4k
Aug 1 00:05:56 [1] 0000400000 - 0037400000 page 2M
Aug 1 00:05:56 [1] 0037400000 - 00377fe000 page 4k
Aug 1 00:05:56 [1] kernel direct mapping tables up to 377fe000 @ 7000-c000
Aug 1 00:05:56 [2] RAMDISK: 4e676000 - 4ef2e93a
Aug 1 00:05:56 [2] Allocated new RAMDISK: 0039f000 - 00c5793a
Aug 1 00:05:56 [2] Move RAMDISK from 000000004e676000 - 000000004ef2e939 to 0039f000 - 00c57939
Aug 1 00:05:56 [4] ACPI: RSDP 000f61b0 00014 (v00 ACPIAM)
Aug 1 00:05:56 [4] ACPI: RSDT 4ef30000 00038 (v01 INTEL D865GLC 20040421 MSFT 00000097)
Aug 1 00:05:56 [4] ACPI: FACP 4ef30200 00081 (v02 INTEL D865GLC 20040421 MSFT 00000097)
Aug 1 00:05:56 [4] ACPI: DSDT 4ef30370 04231 (v01 INTEL D865GLC 00000001 MSFT 0100000D)
Aug 1 00:05:56 [4] ACPI: FACS 4ef40000 00040
Aug 1 00:05:56 [4] ACPI: APIC 4ef30300 00068 (v01 INTEL D865GLC 20040421 MSFT 00000097)
Aug 1 00:05:56 [4] ACPI: ASF! 4ef345b0 00099 (v16 LEGEND I865PASF 00000001 MSFT 0100000D)
Aug 1 00:05:56 [4] ACPI: TCPA 4ef34649 00034 (v01 INTEL TBLOEMID 00000001 MSFT 00000097)
Aug 1 00:05:56 [4] ACPI: WDDT 4ef3467d 00040 (v01 INTEL OEMWDDT 00000001 MSFT 0100000D)
Aug 1 00:05:56 [1] ACPI: Local APIC address 0xfee00000
Aug 1 00:05:56 [3] 375MB HIGHMEM available.
Aug 1 00:05:56 [3] 887MB LOWMEM available.
Aug 1 00:05:56 [2] mapped low ram: 0 - 377fe000
Aug 1 00:05:56 [2] low ram: 0 - 377fe000
Aug 1 00:05:56 [2] node 0 low ram: 00000000 - 377fe000
Aug 1 00:05:56 [2] node 0 bootmap 00008000 - 0000ef00
Aug 1 00:05:56 [2] (7 early reservations) ==> bootmem [0000000000 - 00377fe000]
Aug 1 00:05:56 [2] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Aug 1 00:05:56 [2] #1 [0000100000 - 000039b83c] TEXT DATA BSS ==> [0000100000 - 000039b83c]
Aug 1 00:05:56 [2] #2 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000]
Aug 1 00:05:56 [2] #3 [000039c000 - 000039e18c] BRK ==> [000039c000 - 000039e18c]
Aug 1 00:05:56 [2] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
Aug 1 00:05:56 [2] #5 [000039f000 - 0000c5793a] NEW RAMDISK ==> [000039f000 - 0000c5793a]
Aug 1 00:05:56 [2] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Aug 1 00:05:56 [2] found SMP MP-table at [c00ff780] ff780
Aug 1 00:05:56 [4] Zone PFN ranges:
Aug 1 00:05:56 [4] DMA 0x00000000 -> 0x00001000
Aug 1 00:05:56 [4] Normal 0x00001000 -> 0x000377fe
Aug 1 00:05:56 [4] HighMem 0x000377fe -> 0x0004ef2f
Aug 1 00:05:56 [4] Movable zone start PFN for each node
Aug 1 00:05:56 [4] early_node_map[2] active PFN ranges
Aug 1 00:05:56 [4] 0: 0x00000000 -> 0x0000009f
Aug 1 00:05:56 [4] 0: 0x00000100 -> 0x0004ef2f
Aug 1 00:05:56 [1] On node 0 totalpages: 323278
Aug 1 00:05:56 [1] free_area_init_node: node 0, pgdat c031d560, node_mem_map c1000000
Aug 1 00:05:56 [1] DMA zone: 32 pages used for memmap
Aug 1 00:05:56 [1] DMA zone: 0 pages reserved
Aug 1 00:05:56 [1] DMA zone: 3967 pages, LIFO batch:0
Aug 1 00:05:56 [1] Normal zone: 1744 pages used for memmap
Aug 1 00:05:56 [1] Normal zone: 221486 pages, LIFO batch:31
Aug 1 00:05:56 [1] HighMem zone: 751 pages used for memmap
Aug 1 00:05:56 [1] HighMem zone: 95298 pages, LIFO batch:31
Aug 1 00:05:56 [2] Using APIC driver default
Aug 1 00:05:56 [2] ACPI: PM-Timer IO Port: 0x408
Aug 1 00:05:56 [1] ACPI: Local APIC address 0xfee00000
Aug 1 00:05:56 [2] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Aug 1 00:05:56 [2] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Aug 1 00:05:56 [4] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
Aug 1 00:05:56 [2] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Aug 1 00:05:56 [2] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Aug 1 00:05:56 [2] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 1 00:05:56 [2] IOAPIC[0]: apic_id 2, ve
Aug 1 00:05:56 [2] rsion 32, address 0xfec00000, GSI 0-23
Aug 1 00:05:56 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 1 00:05:56 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 1 00:05:56 [1] ACPI: IRQ0 used by override.
Aug 1 00:05:56 [1] ACPI: IRQ2 used by override.
Aug 1 00:05:56 [1] ACPI: IRQ9 used by override.
Aug 1 00:05:56 [2] Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 1 00:05:56 [2] Using ACPI (MADT) for SMP configuration information
Aug 1 00:05:56 [1] nr_irqs_gsi: 24
Aug 1 00:05:56 [2] Allocating PCI resources starting at 50000000 (gap: 4f000000:afcf0000)
Aug 1 00:05:56 [4] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 320751
Aug 1 00:05:56 [3] Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
Aug 1 00:05:56 [2] Enabling fast FPU save and restore. done.
Aug 1 00:05:56 [2] Enabling unmasked SIMD FPU exception support. done.
Aug 1 00:05:56 [2] Initializing CPU#0
Aug 1 00:05:56 [2] NR_IRQS:288
Aug 1 00:05:56 [4] PID hash table entries: 4096 (order: 12, 16384 bytes)
Aug 1 00:05:56 [4] Fast TSC calibration using PIT
Aug 1 00:05:56 [4] Detected 2792.838 MHz processor.
Aug 1 00:05:56 [4] Console: colour VGA+ 80x25
Aug 1 00:05:56 [2] console [tty0] enabled
Aug 1 00:05:56 [2] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 1 00:05:56 [2] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 1 00:05:56 [2] Initializing HighMem for node 0 (000377fe:0004ef2f)
Aug 1 00:05:56 [2] Memory: 1269672k/1293500k available (1523k kernel code, 22560k reserved, 667k data, 208k init, 384196k highmem)
Aug 1 00:05:56 [2] virtual kernel memory layout:
Aug 1 00:05:56 [2] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
Aug 1 00:05:56 [2] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Aug 1 00:05:56 [2] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
Aug 1 00:05:56 [2] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
Aug 1 00:05:56 [2] .init : 0xc0326000 - 0xc035a000 ( 208 kB)
Aug 1 00:05:56 [2] .data : 0xc027cfdb - 0xc0323e14 ( 667 kB)
Aug 1 00:05:56 [2] .text : 0xc0100000 - 0xc027cfdb (1523 kB)
Aug 1 00:05:56 [2] Checking if this processor honours the WP bit even in supervisor mode.Ok.
Aug 1 00:05:56 [2] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Aug 1 00:05:56 [2] Calibrating delay loop (skipped), value calculated using timer frequency 5585.67 BogoMIPS (lpj=11171352)
Aug 1 00:05:56 [4] Mount-cache hash table entries: 512
Aug 1 00:05:56 [2] CPU: Trace cache: 12K uops, L1 D cache: 8K
Aug 1 00:05:56 [2] CPU: L2 cache: 512K
Aug 1 00:05:56 [4] CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Aug 1 00:05:56 [2] Checking 'hlt' instruction. OK.
Aug 1 00:05:56 [2] ACPI: Core revision 20090320
Aug 1 00:05:56 [2] net_namespace: 296 bytes
Aug 1 00:05:56 [2] NET: Registered protocol family 16
Aug 1 00:05:56 [2] ACPI: bus type pci registered
Aug 1 00:05:56 [2] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
Aug 1 00:05:56 [2] PCI: Using configuration type 1 for base access
Aug 1 00:05:56 [4] bio: create slab at 0
Aug 1 00:05:56 [1] ACPI: EC: Look up EC in DSDT
Aug 1 00:05:56 [2] ACPI: Interpreter enabled
Aug 1 00:05:56 [2] ACPI: (supports S0 S5)
Aug 1 00:05:56 [2] ACPI: Using IOAPIC for interrupt routing
Aug 1 00:05:56 [2] ACPI: Power Resource [URP1] (off)
Aug 1 00:05:56 [2] ACPI: Power Resource [FDDP] (off)
Aug 1 00:05:56 [2] ACPI: Power Resource [LPTP] (off)
Aug 1 00:05:56 [2] ACPI: No dock devices found.
Aug 1 00:05:56 [2] ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 1 00:05:56 [1] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
Aug 1 00:05:56 [1] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
Aug 1 00:05:56 [1] pci 0000:00:02.0: reg 14 32bit mmio: [0xffa80000-0xffafffff]
Aug 1 00:05:56 [1] pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07]
Aug 1 00:05:56 [1] pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f]
Aug 1 00:05:56 [1] pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f]
Aug 1 00:05:56 [1] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
Aug 1 00:05:56 [1] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
Aug 1 00:05:56 [2] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Aug 1 00:05:56 [2] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
Aug 1 00:05:56 [1] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
Aug 1 00:05:56 [1] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
Aug 1 00:05:56 [1] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Aug 1 00:05:56 [1] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
Aug 1 00:05:56 [1] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
Aug 1 00:05:56 [1] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
Aug 1 00:05:56 [1] pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807]
Aug 1 00:05:56 [1] pci 0000:00:1f.2: reg 14 io port: [0xe400-0xe403]
Aug 1 00:05:56 [1] pci 0000:00:1f.2: reg 18 io port: [0xe000-0xe007]
Aug 1 00:05:56 [1] pci 0000:00:1f.2: reg 1c io port: [0xdc00-0xdc03]
Aug 1 00:05:56 [1] pci 0000:00:1f.2: reg 20 io port: [0xd800-0xd80f]
Aug 1 00:05:56 [1] pci 0000:00:1f.3: reg 20 io port: [0xc400-0xc41f]
Aug 1 00:05:56 [1] pci 0000:01:00.0: reg 10 64bit mmio: [0xff800000-0xff8fffff]
Aug 1 00:05:56 [1] pci 0000:01:00.0: reg 18 io port: [0xb800-0xb8ff]
Aug 1 00:05:56 [1] pci 0000:01:01.0: reg 10 64bit mmio: [0xf
Aug 1 00:05:56 [2] f600000-0xff6fffff]
Aug 1 00:05:56 [1] pci 0000:01:01.0: reg 18 io port: [0xb400-0xb4ff]
Aug 1 00:05:56 [1] pci 0000:01:08.0: reg 10 32bit mmio: [0xff4ff000-0xff4fffff]
Aug 1 00:05:56 [1] pci 0000:01:08.0: reg 14 io port: [0xbc00-0xbc3f]
Aug 1 00:05:56 [1] pci 0000:01:08.0: supports D1 D2
Aug 1 00:05:56 [2] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 1 00:05:56 [2] pci 0000:01:08.0: PME# disabled
Aug 1 00:05:56 [2] pci 0000:00:1e.0: transparent bridge
Aug 1 00:05:56 [1] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
Aug 1 00:05:56 [1] pci 0000:00:1e.0: bridge 32bit mmio: [0xff000000-0xff8fffff]
Aug 1 00:05:56 [1] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe6a00000-0xe6afffff]
Aug 1 00:05:56 [1] pci_bus 0000:00: on NUMA node 0
Aug 1 00:05:56 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 1 00:05:56 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
Aug 1 00:05:56 [2] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Aug 1 00:05:56 [2] PCI: Using ACPI for IRQ routing
Aug 1 00:05:56 [1]
Aug 1 00:05:56 [1] printing PIC contents
Aug 1 00:05:56 [1] . PIC IMR: ffff
Aug 1 00:05:56 [1] . PIC IRR: 0000
Aug 1 00:05:56 [1] . PIC ISR: 0000
Aug 1 00:05:56 [1] . PIC ELCR: 0eb8
Aug 1 00:05:56 [4]
Aug 1 00:05:56 [1] printing local APIC contents on CPU#0/0:
Aug 1 00:05:56 [2] . APIC ID: 00000000 (0)
Aug 1 00:05:56 [2] . APIC VERSION: 00050014
Aug 1 00:05:56 [1] . APIC TASKPRI: 00000000 (00)
Aug 1 00:05:56 [1] . APIC PROCPRI: 00000000
Aug 1 00:05:56 [1] . APIC LDR: 01000000
Aug 1 00:05:56 [1] . APIC DFR: ffffffff
Aug 1 00:05:56 [1] . APIC SPIV: 000001ff
Aug 1 00:05:56 [1] . APIC ISR field:
Aug 1 00:05:56 [1] 0123456789abcdef0123456789abcdef
Aug 1 00:05:56 [1] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [1] . APIC TMR field:
Aug 1 00:05:56 [1] 0123456789abcdef0123456789abcdef
Aug 1 00:05:56 [1] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [1] . APIC IRR field:
Aug 1 00:05:56 [1] 0123456789abcdef0123456789abcdef
Aug 1 00:05:56 [1] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [4] 00000000000000000000000000000000
Aug 1 00:05:56 [1] . APIC ESR: 00000000
Aug 1 00:05:56 [1] . APIC ICR: 00000630
Aug 1 00:05:56 [1] . APIC ICR2: 01000000
Aug 1 00:05:56 [1] . APIC LVTT: 000200ef
Aug 1 00:05:56 [1] . APIC LVTPC: 00010000
Aug 1 00:05:56 [1] . APIC LVT0: 00010700
Aug 1 00:05:56 [1] . APIC LVT1: 00000400
Aug 1 00:05:56 [1] . APIC LVTERR: 000000fe
Aug 1 00:05:56 [1] . APIC TMICT: 0000c2d5
Aug 1 00:05:56 [1] . APIC TMCCT: 00007bbb
Aug 1 00:05:56 [1] . APIC TDCR: 00000003
Aug 1 00:05:56 [4]
Aug 1 00:05:56 [1] number of MP IRQ sources: 15.
Aug 1 00:05:56 [1] number of IO-APIC #2 registers: 24.
Aug 1 00:05:56 [2] testing the IO APIC.
Aug 1 00:05:56 [4]
Aug 1 00:05:56 [1] IO APIC #2
Aug 1 00:05:56 [1] register #00: 02000000
Aug 1 00:05:56 [1] . : physical APIC id: 02
Aug 1 00:05:56 [1] . : Delivery Type: 0
Aug 1 00:05:56 [1] . : LTS : 0
Aug 1 00:05:56 [1] register #01: 00178020
Aug 1 00:05:56 [1] . : max redirection entries: 0017
Aug 1 00:05:56 [1] . : PRQ implemented: 1
Aug 1 00:05:56 [1] . : IO APIC version: 0020
Aug 1 00:05:56 [1] IRQ redirection table:
Aug 1 00:05:56 [1] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
Aug 1 00:05:56 [1] 00 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 01 001 0 0 0 0 0 1 1 31
Aug 1 00:05:56 [1] 02 001 0 0 0 0 0 1 1 30
Aug 1 00:05:56 [1] 03 001 0 0 0 0 0 1 1 33
Aug 1 00:05:56 [1] 04 001 0 0 0 0 0 1 1 34
Aug 1 00:05:56 [1] 05 001 0 0 0 0 0 1 1 35
Aug 1 00:05:56 [1] 06 001 0 0 0 0 0 1 1 36
Aug 1 00:05:56 [1] 07 001 0 0 0 0 0 1 1 37
Aug 1 00:05:56 [1] 08 001 0 0 0 0 0 1 1 38
Aug 1 00:05:56 [1] 09 001 0 1 0 0 0 1 1 39
Aug 1 00:05:56 [1] 0a 001 0 0 0 0 0 1 1 3A
Aug 1 00:05:56 [1] 0b 001 0 0 0 0 0 1 1
Aug 1 00:05:56 [2] 3B
Aug 1 00:05:56 [1] 0c 001 0 0 0 0 0 1 1 3C
Aug 1 00:05:56 [1] 0d 001 0 0 0 0 0 1 1 3D
Aug 1 00:05:56 [1] 0e 001 0 0 0 0 0 1 1 3E
Aug 1 00:05:56 [1] 0f 001 0 0 0 0 0 1 1 3F
Aug 1 00:05:56 [1] 10 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 11 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 12 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 13 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 14 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 15 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 16 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] 17 000 1 0 0 0 0 0 0 00
Aug 1 00:05:56 [1] IRQ to pin mappings:
Aug 1 00:05:56 [1] IRQ0 -> 0:2
Aug 1 00:05:56 [1] IRQ1 -> 0:1
Aug 1 00:05:56 [1] IRQ3 -> 0:3
Aug 1 00:05:56 [1] IRQ4 -> 0:4
Aug 1 00:05:56 [1] IRQ5 -> 0:5
Aug 1 00:05:56 [1] IRQ6 -> 0:6
Aug 1 00:05:56 [1] IRQ7 -> 0:7
Aug 1 00:05:56 [1] IRQ8 -> 0:8
Aug 1 00:05:56 [1] IRQ9 -> 0:9
Aug 1 00:05:56 [1] IRQ10 -> 0:10
Aug 1 00:05:56 [1] IRQ11 -> 0:11
Aug 1 00:05:56 [1] IRQ12 -> 0:12
Aug 1 00:05:56 [1] IRQ13 -> 0:13
Aug 1 00:05:56 [1] IRQ14 -> 0:14
Aug 1 00:05:56 [1] IRQ15 -> 0:15
Aug 1 00:05:56 [2] done.
Aug 1 00:05:56 [2] pnp: PnP ACPI init
Aug 1 00:05:56 [2] ACPI: bus type pnp registered
Aug 1 00:05:56 [2] pnp: PnP ACPI: found 12 devices
Aug 1 00:05:56 [2] ACPI: ACPI bus type pnp unregistered
Aug 1 00:05:56 [2] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Aug 1 00:05:56 [2] system 00:0a: ioport range 0x400-0x47f has been reserved
Aug 1 00:05:56 [2] system 00:0a: ioport range 0x680-0x6ff has been reserved
Aug 1 00:05:56 [2] system 00:0a: ioport range 0x500-0x53f has been reserved
Aug 1 00:05:56 [2] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
Aug 1 00:05:56 [2] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
Aug 1 00:05:56 [2] system 00:0a: iomem range 0xfed20000-0xfed9ffff has been reserved
Aug 1 00:05:56 [2] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
Aug 1 00:05:56 [2] system 00:0b: iomem range 0xc0000-0xdffff could not be reserved
Aug 1 00:05:56 [2] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
Aug 1 00:05:56 [2] system 00:0b: iomem range 0x100000-0x4effffff could not be reserved
Aug 1 00:05:56 [2] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
Aug 1 00:05:56 [2] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
Aug 1 00:05:56 [2] pci 0000:00:1e.0: MEM window: 0xff000000-0xff8fffff
Aug 1 00:05:56 [2] pci 0000:00:1e.0: PREFETCH window: 0x000000e6a00000-0x000000e6afffff
Aug 1 00:05:56 [1] pci 0000:00:1e.0: setting latency timer to 64
Aug 1 00:05:56 [1] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Aug 1 00:05:56 [1] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Aug 1 00:05:56 [1] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
Aug 1 00:05:56 [1] pci_bus 0000:01: resource 1 mem: [0xff000000-0xff8fffff]
Aug 1 00:05:56 [1] pci_bus 0000:01: resource 2 pref mem [0xe6a00000-0xe6afffff]
Aug 1 00:05:56 [1] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
Aug 1 00:05:56 [1] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
Aug 1 00:05:56 [2] NET: Registered protocol family 2
Aug 1 00:05:56 [2] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 1 00:05:56 [2] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 1 00:05:56 [2] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Aug 1 00:05:56 [2] TCP: Hash tables configured (established 131072 bind 65536)
Aug 1 00:05:56 [2] TCP reno registered
Aug 1 00:05:56 [2] NET: Registered protocol family 1
Aug 1 00:05:56 [2] Trying to unpack rootfs image as initramfs.
Aug 1 00:05:56 [2] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Aug 1 00:05:56 [2] Freeing initrd memory: 8930k freed
Aug 1 00:05:56 [4] highmem bounce pool size: 64 pages
Aug 1 00:05:56 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 1 00:05:56 [2] msgmni has been set to 1748
Aug 1 00:05:56 [2] io scheduler noop registered (default)
Aug 1 00:05:56 [1] pci 0000:00:02.0: Boot video device
Aug 1 00:05:56 [4] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
Aug 1 00:05:56 [2] brd: module loaded
Aug 1 00:05:56 [2] loop: module loaded
Aug 1 00:05:56 [2] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Aug 1 00:05:56 [2] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 1 00:05:56 [2] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 1 00:05:56 [2] mice: PS/2 mouse device common for all mice
Aug 1 00:05:56 [2] cpuidle: using governor ladder
Aug 1 00:05:56 [2] TCP cubic registered
Aug 1 00:05:56 [2] RPC: Registered udp transport module.
Aug 1 00:05:56 [2] RPC: Registered tcp transport module.
Aug 1 00:05:56 [2] Using IPI Shortcut mode
Aug 1 00:05:56 [2] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Aug 1 00:05:56 [3] RAMDISK: CORE3 root image found at block 0
Aug 1 00:05:56 [4] EXT2-fs warning: checktime reached, running e2fsck is recommended
Aug 1 00:05:56 [4] VFS: Mounted root (ext2 filesystem) on device 1:0.
Aug 1 00:05:56 [2] Freeing unused kernel memory: 208k freed
Aug 1 00:05:57 [2] Floppy drive(s): fd0 is 1.44M
Aug 1 00:05:57 [2] FDC 0 is a National Semiconductor PC87306
Aug 1 00:05:58 [2] rtc_cmos 00:02: RTC can wake from S4
Aug 1 00:05:58 [2] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Aug 1 00:05:58 [2] rtc0: alarms up to one month, 114 bytes nvram
Aug 1 00:05:59 [2] input: PC Speaker as /devices/platform/pcspkr/input/input1
Aug 1 00:05:59 [2] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 1 00:05:59 [2] ACPI: Power Button [PWRF]
Aug 1 00:05:59 [2] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
Aug 1 00:05:59 [2] ACPI: Sleep Button [SLPB]
Aug 1 00:05:59 [2] processor ACPI_CPU:00: registered as cooling_device0
Aug 1 00:05:59 [2] ACPI: Processor [CPU1] (supports 8 throttling states)
Aug 1 00:05:59 [2] usbcore: registered new interface driver usbfs
Aug 1 00:05:59 [2] usbcore: registered new interface driver hub
Aug 1 00:05:59 [2] usbcore: registered new device driver usb
Aug 1 00:05:59 [2] uhci_hcd: USB Universal Host Controller Interface driver
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 1 00:05:59 [1] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c800
Aug 1 00:05:59 [2] usb usb1: configuration #1 chosen from 1 choice
Aug 1 00:05:59 [2] hub 1-0:1.0: USB hub found
Aug 1 00:05:59 [2] hub 1-0:1.0: 2 ports detected
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Aug 1 00:05:59 [1] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
Aug 1 00:05:59 [2] usb usb2: configuration #1 chosen from 1 choice
Aug 1 00:05:59 [2] hub 2-0:1.0: USB hub found
Aug 1 00:05:59 [2] hub 2-0:1.0: 2 ports detected
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Aug 1 00:05:59 [1] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
Aug 1 00:05:59 [2] usb usb3: configuration #1 chosen from 1 choice
Aug 1 00:05:59 [2] hub 3-0:1.0: USB hub found
Aug 1 00:05:59 [2] hub 3-0:1.0: 2 ports detected
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 1 00:05:59 [1] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Aug 1 00:05:59 [2] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
Aug 1 00:05:59 [2] usb usb4: configuration #1 chosen from 1 choice
Aug 1 00:05:59 [2] hub 4-0:1.0: USB hub found
Aug 1 00:05:59 [2] hub 4-0:1.0: 2 ports detected
Aug 1 00:05:59 [3] SCSI subsystem initialized
Aug 1 00:05:59 [1] libata version 3.00 loaded.
Aug 1 00:05:59 [2] sata_mv 0000:01:00.0: version 1.28
Aug 1 00:05:59 [2] sata_mv 0000:01:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Aug 1 00:05:59 [2] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Aug 1 00:05:59 [2] scsi0 : sata_mv
Aug 1 00:05:59 [2] scsi1 : sata_mv
Aug 1 00:05:59 [2] scsi2 : sata_mv
Aug 1 00:05:59 [2] scsi3 : sata_mv
Aug 1 00:05:59 [2] ata1: SATA max UDMA/133 mmio m1048576@0xff800000 port 0xff822000 irq 21
Aug 1 00:05:59 [2] ata2: SATA max UDMA/133 mmio m1048576@0xff800000 port 0xff824000 irq 21
Aug 1 00:05:59 [2] ata3: SATA max UDMA/133 mmio m1048576@0xff800000 port 0xff826000 irq 21
Aug 1 00:05:59 [2] ata4: SATA max UDMA/133 mmio m1048576@0xff800000 port 0xff828000 irq 21
Aug 1 00:05:59 [2] sata_mv 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Aug 1 00:05:59 [2] sata_mv 0000:01:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Aug 1 00:05:59 [2] scsi4 : sata_mv
Aug 1 00:05:59 [2] scsi5 : sata_mv
Aug 1 00:05:59 [2] scsi6 : sata_mv
Aug 1 00:05:59 [2] scsi7 : sata_mv
Aug 1 00:05:59 [2] ata5: SATA max UDMA/133 mmio m1048576@0xff600000 port 0xff622000 irq 22
Aug 1 00:05:59 [2] ata6: SATA max UDMA/133 mmio m1048576@0xff600000 port 0xff624000 irq 22
Aug 1 00:05:59 [2] ata7: SATA max UDMA/133 mmio m1048576@0xff600000 port 0xff626000 irq 22
Aug 1 00:05:59 [2] ata8: SATA max UDMA/133 mmio m1048576@0xff600000 port 0xff628000 irq 22
Aug 1 00:05:59 [2] usb 2-2: new full speed USB device using uhci_hcd and address 2
Aug 1 00:06:00 [2] usb 2-2: configuration #1 chosen from 1 choice
Aug 1 00:06:00 [2] hub 2-2:1.0: USB hub found
Aug 1 00:06:00 [2] hub 2-2:1.0: 1 port detected
Aug 1 00:06:00 [2] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:00 [2] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:00 [2] ata1.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Aug 1 00:06:00 [2] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:00 [2] ata5.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
Aug 1 00:06:00 [2] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:00 [2] ata1.00: configured for UDMA/133
Aug 1 00:06:00 [3] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Aug 1 00:06:00 [2] ata5.00: configured for UDMA/133
Aug 1 00:06:00 [2] usb 2-2.1: new full speed USB device using uhci_hcd and address 3
Aug 1 00:06:00 [2] usb 2-2.1: configuration #1 chosen from 1 choice
Aug 1 00:06:00 [2] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:01 [2] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
Aug 1 00:06:01 [2] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:01 [2] ata2.00: configured for UDMA/133
Aug 1 00:06:01 [3] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
Aug 1 00:06:01 [2] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:02 [2] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Aug 1 00:06:02 [2] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:02 [2] ata3.00: configured for UDMA/133
Aug 1 00:06:02 [3] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Aug 1 00:06:03 [2] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:03 [2] ata4.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Aug 1 00:06:03 [2] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:03 [2] ata4.00: configured for UDMA/133
Aug 1 00:06:03 [3] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Aug 1 00:06:03 [3] scsi 4:0:0:0: Direct-Access ATA WDC WD10EARS-00M 50.0 PQ: 0 ANSI: 5
Aug 1 00:06:03 [2] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:03 [2] ata6.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Aug 1 00:06:03 [2] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:03 [2] ata6.00: configured for UDMA/133
Aug 1 00:06:03 [3] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Aug 1 00:06:04 [2] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:04 [2] ata7.00: ATA-8: WDC WD20EARX-00ZUDB0, 80.00A80, max UDMA/133
Aug 1 00:06:04 [2] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:04 [2] ata7.00: configured for UDMA/133
Aug 1 00:06:04 [3] scsi 6:0:0:0: Direct-Access ATA WDC WD20EARX-00Z 80.0 PQ: 0 ANSI: 5
Aug 1 00:06:04 [2] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 1 00:06:04 [2] ata8.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
Aug 1 00:06:04 [2] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 1 00:06:04 [2] ata8.00: configured for UDMA/133
Aug 1 00:06:04 [3] scsi 7:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
Aug 1 00:06:04 [2] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Aug 1 00:06:04 [2] e100: Copyright(c) 1999-2006 Intel Corporation
Aug 1 00:06:04 [2] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Aug 1 00:06:04 [2] e100 0000:01:08.0: PME# disabled
Aug 1 00:06:04 [2] e100: eth0: e100_probe: addr 0xff4ff000, irq 20, MAC addr 00:0c:f1:e0:83:4c
Aug 1 00:06:04 [2] Uniform Multi-Platform E-IDE driver
Aug 1 00:06:04 [2] piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02)
Aug 1 00:06:04 [2] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
Aug 1 00:06:04 [2] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Aug 1 00:06:04 [2] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
Aug 1 00:06:04 [2] ide0: BM-DMA at 0xffa0-0xffa7
Aug 1 00:06:04 [2] ide1: BM-DMA at 0xffa8-0xffaf
Aug 1 00:06:04 [1] Probing IDE interface ide0.
Aug 1 00:06:05 [1] Probing IDE interface ide1.
Aug 1 00:06:06 [2] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 1 00:06:06 [2] ide1 at 0x170-0x177,0x376 on irq 15
Aug 1 00:06:06 [1] ata_piix 0000:00:1f.2: version 2.13
Aug 1 00:06:06 [2] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Aug 1 00:06:06 [2] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Aug 1 00:06:06 [1] ata_piix 0000:00:1f.2: setting latency timer to 64
Aug 1 00:06:06 [2] scsi8 : ata_piix
Aug 1 00:06:06 [2] scsi9 : ata_piix
Aug 1 00:06:06 [2] ata9: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 18
Aug 1 00:06:06 [2] ata10: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 18
Aug 1 00:06:07 [2] ata10.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
Aug 1 00:06:07 [2] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug 1 00:06:07 [2] ata10.00: configured for UDMA/133
Aug 1 00:06:07 [3] scsi 9:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
Aug 1 00:06:08 [2] Initializing USB Mass Storage driver.
Aug 1 00:06:08 [2] scsi10 : SCSI emulation for USB Mass Storage devices
Aug 1 00:06:08 [1] usb-storage: device found at 3
Aug 1 00:06:08 [1] usb-storage: waiting for device to settle before scanning
Aug 1 00:06:08 [2] usbcore: registered new interface driver usb-storage
Aug 1 00:06:08 [2] USB Mass Storage support registered.
Aug 1 00:06:08 [4] Driver 'sd' needs updating - please use bus_type methods
Aug 1 00:06:08 [3] sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Aug 1 00:06:08 [3] sd 0:0:0:0: [sda] Write Protect is off
Aug 1 00:06:08 [1] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sda:<5>sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Aug 1 00:06:08 [3] sd 1:0:0:0: [sdb] Write Protect is off
Aug 1 00:06:08 [1] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sdb:
Aug 1 00:06:08 [3] sd 2:0:0:0: [sdc] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Aug 1 00:06:08 [3] sd 2:0:0:0: [sdc] Write Protect is off
Aug 1 00:06:08 [1] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sdc:<5>sd 3:0:0:0: [sdd] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Aug 1 00:06:08 [3] sd 3:0:0:0: [sdd] Write Protect is off
Aug 1 00:06:08 [1] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sdd:<5>sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
Aug 1 00:06:08 [3] sd 4:0:0:0: [sde] Write Protect is off
Aug 1 00:06:08 [1] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sde:<5>sd 5:0:0:0: [sdf] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Aug 1 00:06:08 [3] sd 5:0:0:0: [sdf] Write Protect is off
Aug 1 00:06:08 [1] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sdf:<5>sd 6:0:0:0: [sdg] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Aug 1 00:06:08 [3] sd 6:0:0:0: [sdg] Write Protect is off
Aug 1 00:06:08 [1] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sdg:
Aug 1 00:06:08 [3] sd 7:0:0:0: [sdh] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
Aug 1 00:06:08 [3] sd 7:0:0:0: [sdh] Write Protect is off
Aug 1 00:06:08 [1] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sdh:<5>sd 9:0:0:0: [sdi] 3907029168 512-byte hardware sectors: (2.00 TB/1.81 TiB)
Aug 1 00:06:08 [3] sd 9:0:0:0: [sdi] Write Protect is off
Aug 1 00:06:08 [1] sd 9:0:0:0: [sdi] Mode Sense: 00 3a 00 00
Aug 1 00:06:08 [3] sd 9:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 1 00:06:08 [2] sdi: unknown partition table
Aug 1 00:06:08 [3] sd 1:0:0:0: [sdb] Attached SCSI disk
Aug 1 00:06:08 [4] sdc1
Aug 1 00:06:08 [3] sd 2:0:0:0: [sdc] Attached SCSI disk
Aug 1 00:06:08 [4] sdi1
Aug 1 00:06:08 [3] sd 9:0:0:0: [sdi] Attached SCSI disk
Aug 1 00:06:09 [4] unknown partition table
Aug 1 00:06:09 [4] sdf1
Aug 1 00:06:09 [3] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 1 00:06:09 [3] sd 5:0:0:0: [sdf] Attached SCSI disk
Aug 1 00:06:09 [4] sdd1
Aug 1 00:06:09 [3] sd 3:0:0:0: [sdd] Attached SCSI disk
Aug 1 00:06:09 [4] sdg1
Aug 1 00:06:09 [3] sd 6:0:0:0: [sdg] Attached SCSI disk
Aug 1 00:06:09 [4] sdh1
Aug 1 00:06:09 [3] sd 7:0:0:0: [sdh] Attached SCSI disk
Aug 1 00:06:09 [4] sde1
Aug 1 00:06:09 [3] sd 4:0:0:0: [sde] Attached SCSI disk
Aug 1 00:06:13 [3] scsi 10:0:0:0: Direct-Access LG X-tick 2.0 1.00 PQ: 0 ANSI: 0 CCS
Aug 1 00:06:13 [1] usb-storage: device scan complete
Aug 1 00:06:13 [3] sd 10:0:0:0: [sdj] 2031616 512-byte hardware sectors: (1.04 GB/992 MiB)
Aug 1 00:06:13 [3] sd 10:0:0:0: [sdj] Write Protect is off
Aug 1 00:06:13 [1] sd 10:0:0:0: [sdj] Mode Sense: 00 26 00 00
Aug 1 00:06:13 [5] sd 10:0:0:0: [sdj] Assuming drive cache: write through
Aug 1 00:06:13 [5] sd 10:0:0:0: [sdj] Assuming drive cache: write through
Aug 1 00:06:13 [2] sdj:
Aug 1 00:06:13 [2] sdj1
Aug 1 00:06:13 [3] sd 10:0:0:0: [sdj] Attached SCSI removable disk
Aug 1 00:07:07 [2] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
Aug 1 01:09:57 [2] kjournald starting. Commit interval 5 seconds
Aug 1 01:09:57 [2] EXT3 FS on sdc1, internal journal
Aug 1 01:09:57 [2] EXT3-fs: mounted filesystem with writeback data mode.
Aug 1 01:09:57 [2] kjournald starting. Commit interval 5 seconds
Aug 1 01:09:57 [2] EXT3 FS on sdd1, internal journal
Aug 1 01:09:57 [2] EXT3-fs: mounted filesystem with writeback data mode.
Aug 1 01:09:58 [2] kjournald starting. Commit interval 5 seconds
Aug 1 01:09:58 [2] EXT3 FS on sde1, internal journal
Aug 1 01:09:58 [2] EXT3-fs: mounted filesystem with writeback data mode.
Aug 1 01:09:58 [2] kjournald starting. Commit interval 5 seconds
Aug 1 01:09:58 [2] EXT3 FS on sdf1, internal journal
Aug 1 01:09:58 [2] EXT3-fs: mounted filesystem with writeback data mode.
Aug 1 01:09:58 [2] kjournald starting. Commit interval 5 seconds
Aug 1 01:09:58 [2] EXT3 FS on sdg1, internal journal
Aug 1 01:09:58 [2] EXT3-fs: mounted filesystem with writeback data mode.
Aug 1 01:09:58 [2] kjournald starting. Commit interval 5 seconds
Aug 1 01:09:58 [2] EXT3 FS on sdh1, internal journal
Aug 1 01:09:58 [2] EXT3-fs: mounted filesystem with writeback data mode.
Aug 1 01:09:58 [2] kjournald starting. Commit interval 5 seconds
Aug 1 01:09:58 [2] EXT3 FS on sdi1, internal journal
Aug 1 01:09:58 [2] EXT3-fs: mounted filesystem with writeback data mode.

Screen shot after format but before rebooting

NB: Disk-0 always fails, no matter what disk I put in, so I use a dud disk in it's place.

Screen after Formatting Disk-1, exporting disk, saving configuration and rebooting the device.

Are disk 0 and 1 on the same controller? Per the syslog, I assume this is a Marvel firmware RAID device. Make sure the Marvel BIOS does not have any RAID pairs set up and 0 and 1 are set as single drives. Also make sure that the cables you are using for 0 and 1 are SATA2 or at least match the drive capability (in case of a SATA1 drive).

Tony.

Hi Tony,

Thanks for your response.

Yes Disk 0 and 1 are on the same controller. There are no RAID pairs set up for 0 and 1. They are single drives, as they were prior to a new HDD being installed after the previous failed. Cables are the same also, but I checked just to make sure and everything is okay.

I had a onboard graphics mobo failure, so I've chucked in a new mobo, plugged in the USB boot drive. I'm now reformatting the Disk 1 to see what will happen. However, the problem I have now is that the NAS ethernet drivers don't match the new onboard mobo lan. Is there anyway around this without having to re-install? The new mobo has no IDE ports, which means I am using a SATA CD rom, which it can't mount, even with Bios set to IDE controllers instead of SATA.

Mark.

PS. Sorry for posting the licence key before and thanks for deleting - i didn't even realise.

So, hardware problems

The new board just needs a new unlock and you should be OK. If the NIC was not supported, the OS will just bail and shut down since it can't be a NAS without a NIC. If you are formatting drives, then you'll be in business after unlock.

Tony.

Tony,

I formatted and mounted Disk-0 first, then after formatting and mounting Disk-1, Disk-0 failed and unmounted, but Disk-1 was mounted so back to normal and good enough for me. The same work around I must have discovered last time, but it was a while ago so I forgot. Hopefully this thread will remind me next time around

Also, the new unlock code was applied, but the NAS is not accessible on the network. I get an orange flashing light on the mobo nic. I'll keep trying, and I'll load up Ubuntu desktop and see if I can connect to the internet first, but is there any advice for getting a fresh install of NASlite on a mobo with no IDE or no working Sata IDE emulation?

Thanks for your help with this also, it's greatly appreciated.

Mark.

its a while since i did it so try this and see if my memory is good - take the drive you want to install Naslite onto to another machine where you have ide or whatever you need - install it but dont add the serial number and unlock code

put that drive back into your original machine - boot up and configure as you want adding serial number and unlock code

i think that should work

Well, that worked! *relief* I'll be printing this thread out and keeping it for future reference.

You had me scrounging around looking for an old system (that actually worked). My workshop is strewn with parts, cables etc trying to get an old system up and running just to do the install.

It got me thinking. As old systems start to be retired (like my previous with the onboard graphics mobo problem) and thrown out, how are people going to get NASLite up and running on newer systems in future, if it can't mount SATA CD/DVD drives? How are they going to do the initial install? NASLite is an awesome piece of software and I'd hate to see it go.

Mark.

Uh... not quite there yet...

NIC green light solid, amber flashing... but I can't see the NAS on the network and pinging it returns unreachable... NAS IP address has been checked also.

I suppose I need to check the compatible hardware list now...

Pfft... just when I thought I was there...

Ah, it's a Realtek 8111E on my mobo...

Chucked in a PCI NIC I had lying around. Rebooted, changed NASlite Network settings to 'last', rebooted, disabled onboard NIC, rebooted and it's all working now.

*sigh of relief*

4 days to remedy this and I need a break...

I thought I was there... but another hurdle... *pulls hair out*

All the services are activated on NASLite, I can see the device in network places in Win7, but double clicking results in "Cannot Access" error.

I tried pinging the NAS a few times and I got a few MISCOMPARE errors, but now I only get "Request timed out."

However I can ping from NASLite, back to the computer I originally pinged it from with intermittent packet loss each time.

Could it be a faulty PCI NIC in the NASLite maybe?

I really need to fix this as I need the NAS up and working ASAP.

I'm a bit perplexed because I was able to HTTP over to the NAS, but after the reboot I can't even do that.