tony a wrote:
i would take it out of the usb enclosure and test it as a 'normal' drive - if it works fine then you are looking at the usb enclosure, cable or its power supply - if it continues to fail then it is the drive - that starts to narrow down the problem
Hi
tony a,
thank you for the answer but, before doing what you suggested to me (I already thought to act just like this), I wanted to do my last USB Disk-3 (NASLIte) reformat to add one more information to my/our background.
So :
(1) again - reformat done OK
(2) NASLite restart drive is OK
(3) I used USB Disk-3 for three days to normal copy or backup operation and it was OK
(4) then I set it up as MIRROR of Disk-1 at 11 A.M. (I noticed it was really Mirroring Disk-1)
(5) I switched NAS off at 11 P.M.
(6) I restarded NAS this morning and - again - Disk-3 <
FAIL >
It seems a mirroring related problem and not a USB disk related problem.
I think it's really strange, isn't it ??
Migi.