NASLite Network Attached Storage

Im using a PC with no CD drive. I am upgrading from Naslite 1 to MS. The old PC has USB but does not boot from them. I therefore need what I have read as a "kicker" floppy. But nowhere can i find a download link or know how to do this. Can anyone point me in the right direction.

thanks,

the docs say



dont have a disc here to check - but thats a place to look

Yep I read that aswell, which is why I am perplexed as to where I can get it because there is no such folder on the cd image I have downloaded!

there is a copy on the old usb naslite2 disc - or i think thats what it is - when i run it it asks me to put a floppy in a drive [dont have one so cannot test]

have attached it - cannot see that being a problem - if it is and gets deleted pm me an email addy

unpack and is should be there

thanks for this, thought all my issues would be over, but when it loads the floppy it still fails to recognise the USB........grrrrr

not all usb's are equal - maybe thats it - it seems to me you are making life hard but i dont know what you can add to the PC to make it easy

a few suggestions

a different usb stick
a cd drive
a small harddrive on the ide line to boot from - i use a cf to ide adaptor and boot from a cf card - but any ide drive would do
add the software to a boot partition on one of your harddrives - easy to say but a bit harded than the others as you would have to back up any data before doing it as the process would wipe the drive