NASLite Network Attached Storage

www.serverelements.com
Task-specific simplicity with low hardware requirements.
It is currently Sun Dec 05, 2021 9:26 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Thu Dec 01, 2011 9:29 pm 
Offline

Joined: Wed Jan 21, 2009 11:54 pm
Posts: 29
I see this repeating over and over like a couple hundred times... I have two drives not mounted... Is this from bad blocks?
I have not had this NAS running for probably a year. Do bad spots develop when a drive is not in use?

Dec 1 19:11:45 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd 4017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] scsi3: ERROR on channel 0, id 0, lun 0, CDB: 0x28 00 00 04 4f b1 00 00 c8 00
Dec 1 19:11:45 [4] Current sd08:11: sns = 70 3
Dec 1 19:11:45 [4] ASC=11 ASCQ= 4
Dec 1 19:11:45 [4] Raw sense data:0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x11 0x04 0x00 0x00 0x00 0x00
Dec 1 19:11:45 [4] I/O error: dev 08:11, sector 266480
Dec 1 19:11:45 [4] ata4: port reset, p_is 40000001 is 8 pis 0 cmd 4017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata4: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata4: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata4: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata4: port reset, p_is 40000001 is 8 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata4: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata4: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata4: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata4: port reset, p_is 40000001 is 8 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata4: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata4: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata4: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata4: port reset, p_is 40000001 is 8 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata4: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata4: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata4: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] ata4: port reset, p_is 40000001 is 8 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:11:45 [5] ata4: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:11:45 [4] ata4: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:11:45 [4] ata4: error=0x40 { UncorrectableError }
Dec 1 19:11:45 [4] scsi5: ERROR on channel 0, id 0, lun 0, CDB: 0x28 00 14 3c 40 19 00 00 98 00
Dec 1 19:11:45 [4] Current sd08:21: sns = 70 3
Dec 1 19:11:45 [4] ASC=11 ASCQ= 4
Dec 1 19:11:45 [4] Raw sense data:0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x11 0x04 0x00 0x00 0x00 0x00
Dec 1 19:11:45 [4] I/O error: dev 08:21, sector 339476824
Dec 1 19:11:45 [2] kjournald starting. Commit interval 5 seconds
Dec 1 19:11:45 [2] EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
Dec 1 19:11:45 [2] EXT3-fs: mounted filesystem with ordered data mode.
Dec 1 19:11:45 [2] Adding Swap: 1048568k swap-space (priority -1)
Dec 1 19:18:15 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:18:15 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:18:15 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:18:15 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:18:18 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:18:18 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:18:18 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:18:18 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:18:21 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:18:21 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:18:21 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:18:21 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:18:25 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:18:25 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:18:25 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:18:25 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:18:28 [4] ata2: port reset, p_is 40000001 is 2 pis 0 cmd c017 tf 4051 ss 113 se 0
Dec 1 19:18:28 [5] ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
Dec 1 19:18:28 [4] ata2: status=0x51 { DriveReady SeekComplete Error }
Dec 1 19:18:28 [4] ata2: error=0x40 { UncorrectableError }
Dec 1 19:18:28 [4] scsi3: ERROR on channel 0, id 0, lun 0, CDB: 0x28 00 00 04 4f b1 00 00 c8 00


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group