NASLite Network Attached Storage

Sorry its going to be a long post this one, i just hope someone can help.

i work at a signs and banner manufacturer and we installed naslite m2 onto an old PC and got 2 drives for backupo and everything has been fine and dandy up until this week, we run 2 large format printers, 2 laser printers 5 xp machines 1 windows 7 ultimate pc and windows 7 home laptop. everything has been running fine.

When we first put the win 7 computer and laptop into the network we had to disable the homegroup options to the usual "work network" with all the settings for 40bit enription no passwords etc in advanced settings with network discovery etc. everything was working fine.

then this week, the windows 7 PC, when i brought back from overnight hibernation the network only listed the other win 7 laptop, and no xp machines and no naslite fileserver, 1 other pc did spring into life as i had mapped an external drive that was connected to it, but i hadnt mapped any of the fileserver drives, nor any other of the drives on the other xp machines.

I still have the FILESERVER media icon and i can connect to it and view music and videos so it is able to make a connection and the http admin screens but the folder side of it saying disk-0 and disk-1 just wont show up no matter what i do , i did install the latest version of naslite 1.6.5. because of the issues with SMB shares, but i dont think this is the problem.

i have re installed windows 7 and its still the same, no xp machines or fileserver i have reset the tcp stack and various other services to see if thats the problem and windows is reporting back that everything is ok.


it just p*sses me off that when i am at my busiest time i get this and have to start from scratch again, i would appreciate any help anyone can give me with this, as my boss who thought the nas box was the best thing since sliced bread and now as its not working with win7 he aint a happy bunny.
thanks
Alan

Have you rebooted the NL server?

Have you changed any hardware on the NAS? Did you check and see that the unlock key is valid? Did you have a power outage? IF so it might have brought the server down and require a file system check. Normally this will run at boot and fix any file system inconsistencies but if you don't have enough RAM and are running multi-terabyte drives it will fail and simply not mount the drives until you run FCSK successfully. If this is the case you may have to add RAM.

IF the above fails and all looks well try this next.

Try turning off all the machines and then bring up the internet router first, likely the DHCP server as well. Next the NAS box and give it time to come up and bring any services on line. Then bring up each machine after that.

Post back your log file as well.

Mike

Just to check: have you upgraded NASLite to the latest version? This is necessary due to a Windows update which has affected SMB access - no fault of ServerElements, rather Microsoft "breaking" something that was otherwise working, presumably to stop potential exploits.

Sorry i should have mentioned the fileserver is working fine with all the other machines, i have upgraded it to the latest version which says 1.6.5 its just the fact that my computer now refuses to see anything but a damn windows 7 machine. Ive done loads of searches on google about this problem, which seams to have raised its ugly head loads of times with different people, but there isnt 1 sure fire way of fixing this problem that i can find.

After completely re installing windows 7 onto a clean drive, making sure that all the ethernet drivers for the nic cards are ok (this PC has 2) and that all other drivers are ok is making me think that it may not be the PC and be something else, i just don't know it's driving me round the twist. The network and fileserver are fine with XP machines and the other win 7 laptop, its just this 1 PC.

thanks for your replys, any help with this is much appreciated.

Alan

Did you or didn't you restart your switch to clear the routing cache?

Is the netmask set correctly?

Is the IP correct?

Is the workgroup set correctly?

Mike

Thanks for that Mike, yep i did all the above, i have brought the machine home to try it on my home router, i have done a complete re install, i am going to get all the related software i need on it whilst it is here, and then get it to talk to the works router when i get it back there, one thing i did notice was when i brought it home it wouldn't find the other xp machine, so i went into network and settings clicked on its own drive and said create shortcut to itself, i then altered the shortcut link to the xp machine, and it found it!

hopefully i'll be able to use the same trick at work
Alan

well i managed to get it working at home with my router there, I brought it back to work here yesterday, and it was working showing all the other pc's (6xp and 1 win7) I come in this morning, and again its only showing the nas server as a media device and not as a file folder, i think it may be the router thats playing up, i have disabled ipv6 which usually brings the naslite back on line, i even mapped disk-0 to drive z just incase it was because i hadn't mapped any drives. and its the latest version 1.65 june 2011 of naslite.

anyone any ideas please, as i have to have this back up and running for Monday

Alan

Heres the Log you ask for, thank you


System Message Log:

Jul 7 08:53:11 [3] klogd started: BusyBox v1.12.1 (2009-11-19 21:21:30 UTC)
Jul 7 08:53:11 [3] Linux version 2.6.30.3.CORE3 (root@DevBox) (gcc version 4.1.2 (SE 4.1.2 p1.0.2)) #1 Wed Jul 14 01:02:59 UTC 2010
Jul 7 08:53:11 [2] KERNEL supported cpus:
Jul 7 08:53:11 [2] Intel GenuineIntel
Jul 7 08:53:11 [2] AMD AuthenticAMD
Jul 7 08:53:11 [2] NSC Geode by NSC
Jul 7 08:53:11 [2] Cyrix CyrixInstead
Jul 7 08:53:11 [2] Centaur CentaurHauls
Jul 7 08:53:11 [2] Transmeta GenuineTMx86
Jul 7 08:53:11 [2] Transmeta TransmetaCPU
Jul 7 08:53:11 [2] UMC UMC UMC UMC
Jul 7 08:53:11 [2] BIOS-provided physical RAM map:
Jul 7 08:53:11 [2] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jul 7 08:53:11 [2] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jul 7 08:53:11 [2] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Jul 7 08:53:11 [2] BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
Jul 7 08:53:11 [2] BIOS-e820: 000000003f6f0000 - 000000003f6fb000 (ACPI data)
Jul 7 08:53:11 [2] BIOS-e820: 000000003f6fb000 - 000000003f700000 (ACPI NVS)
Jul 7 08:53:11 [2] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
Jul 7 08:53:11 [2] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
Jul 7 08:53:11 [2] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Jul 7 08:53:11 [2] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Jul 7 08:53:11 [2] DMI present.
Jul 7 08:53:11 [3] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Jul 7 08:53:11 [1] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Jul 7 08:53:11 [2] last_pfn = 0x3f6f0 max_arch_pfn = 0x100000
Jul 7 08:53:11 [2] init_memory_mapping: 0000000000000000-00000000377fe000
Jul 7 08:53:11 [1] 0000000000 - 0000400000 page 4k
Jul 7 08:53:11 [1] 0000400000 - 0037400000 page 2M
Jul 7 08:53:11 [1] 0037400000 - 00377fe000 page 4k
Jul 7 08:53:11 [1] kernel direct mapping tables up to 377fe000 @ 10000-15000
Jul 7 08:53:11 [2] RAMDISK: 3ee3f000 - 3f6ee0db
Jul 7 08:53:11 [2] Allocated new RAMDISK: 0039f000 - 00c4e0db
Jul 7 08:53:11 [2] Move RAMDISK from 000000003ee3f000 - 000000003f6ee0da to 0039f000 - 00c4e0da
Jul 7 08:53:11 [4] ACPI: RSDP 000f7210 00024 (v02 PTLTD )
Jul 7 08:53:11 [4] ACPI: XSDT 3f6f65d7 00054 (v01 PTLTD XSDT 00050000 LTP 00000000)
Jul 7 08:53:11 [4] ACPI: FACP 3f6f669f 000F4 (v03 FSC 00050000 000F4240)
Jul 7 08:53:11 [4] ACPI: DSDT 3f6f6793 044AB (v01 FSC D2334 00050000 MSFT 02000002)
Jul 7 08:53:11 [4] ACPI: FACS 3f6fbfc0 00040
Jul 7 08:53:11 [4] ACPI: SSDT 3f6fac3e 0017C (v01 FSC EISTCPU0 00050000 CSF 00000001)
Jul 7 08:53:11 [4] ACPI: SSDT 3f6fadba 0017C (v01 FSC EISTCPU1 00050000 CSF 00000001)
Jul 7 08:53:11 [4] ACPI: MCFG 3f6faf36 00040 (v01 PTLTD MCFG 00050000 LTP 00000000)
Jul 7 08:53:11 [4] ACPI: APIC 3f6faf76 00062 (v01 FSC APIC 00050000 CSF 00000000)
Jul 7 08:53:11 [4] ACPI: BOOT 3f6fafd8 00028 (v01 PTLTD $SBFTBL$ 00050000 LTP 00000001)
Jul 7 08:53:11 [1] ACPI: Local APIC address 0xfee00000
Jul 7 08:53:11 [3] 126MB HIGHMEM available.
Jul 7 08:53:11 [3] 887MB LOWMEM available.
Jul 7 08:53:11 [2] mapped low ram: 0 - 377fe000
Jul 7 08:53:11 [2] low ram: 0 - 377fe000
Jul 7 08:53:11 [2] node 0 low ram: 00000000 - 377fe000
Jul 7 08:53:11 [2] node 0 bootmap 00011000 - 00017f00
Jul 7 08:53:11 [2] (7 early reservations) ==> bootmem [0000000000 - 00377fe000]
Jul 7 08:53:11 [2] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Jul 7 08:53:11 [2] #1 [0000100000 - 000039b83c] TEXT DATA BSS ==> [0000100000 - 000039b83c]
Jul 7 08:53:11 [2] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Jul 7 08:53:11 [2] #3 [000039c000 - 000039e18c] BRK ==> [000039c000 - 000039e18c]
Jul 7 08:53:11 [2] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
Jul 7 08:53:11 [2] #5 [000039f000 - 0000c4e0db] NEW RAMDISK ==> [000039f000 - 0000c4e0db]
Jul 7 08:53:11 [2] #6 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
Jul 7 08:53:11 [2] found SMP MP-table at [c00f71b0] f71b0
Jul 7 08:53:11 [4] Zone PFN ranges:
Jul 7 08:53:11 [4] DMA 0x00000010 -> 0x00001000
Jul 7 08:53:11 [4] Normal 0x00001000 -> 0x000377fe
Jul 7 08:53:11 [4] HighMem 0x000377fe -> 0x0003f6f0
Jul 7 08:53:11 [4] Movable zone start PFN for each node
Jul 7 08:53:11 [4] early_node_map[2] active PFN ranges
Jul 7 08:53:11 [4] 0: 0x00000010 -> 0x0000009f
Jul 7 08:53:11 [4] 0: 0x00000100 -> 0x0003f6f0
Jul 7 08:53:11 [1] On node 0 totalpages: 259711
Jul 7 08:53:11 [1] free_area_init_node: node 0, pgdat c031d560, node_mem_map c1000200
Jul 7 08:53:11 [1] DMA zone: 32 pages used for memmap
Jul 7 08:53:11 [1] DMA zone: 0 pages reserved
Jul 7 08:53:11 [1] DMA zone: 3951 pages, LIFO batch:0
Jul 7 08:53:11 [1] Normal zone: 1744 pages used for memmap
Jul 7 08:53:11 [1] Normal zone: 221486 pages, LIFO batch:31
Jul 7 08:53:11 [1] HighMem zone: 254 pages used for memmap
Jul 7 08:53:11 [1] HighMem zone: 32244 pages, LIFO batch:7
Jul 7 08:53:11 [2] Using APIC driver default
Jul 7 08:53:11 [2] ACPI: PM-Timer IO Port: 0xf008
Jul 7 08:53:11 [1] ACPI: Local APIC address 0xfee00000
Jul 7 08:53:11 [2] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 7 08:53:11 [2] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jul 7 08:53:11 [4] ACPI: NR_CPUS/possible_cpus limit of 1 re
Jul 7 08:53:11 [2] ached. Processor 1/0x1 ignored.
Jul 7 08:53:11 [2] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Jul 7 08:53:11 [2] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jul 7 08:53:11 [2] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Jul 7 08:53:11 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Jul 7 08:53:11 [2] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 7 08:53:11 [1] ACPI: IRQ0 used by override.
Jul 7 08:53:11 [1] ACPI: IRQ2 used by override.
Jul 7 08:53:11 [1] ACPI: IRQ9 used by override.
Jul 7 08:53:11 [2] Enabling APIC mode: Flat. Using 1 I/O APICs
Jul 7 08:53:11 [2] Using ACPI (MADT) for SMP configuration information
Jul 7 08:53:11 [1] nr_irqs_gsi: 24
Jul 7 08:53:11 [2] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Jul 7 08:53:11 [4] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257681
Jul 7 08:53:11 [3] Kernel command line: rw root=/dev/ram0 initrd=NASLite.02 quiet BOOT_IMAGE=NASLite.01
Jul 7 08:53:11 [2] Enabling fast FPU save and restore. done.
Jul 7 08:53:11 [2] Enabling unmasked SIMD FPU exception support. done.
Jul 7 08:53:11 [2] Initializing CPU#0
Jul 7 08:53:11 [2] NR_IRQS:288
Jul 7 08:53:11 [4] PID hash table entries: 4096 (order: 12, 16384 bytes)
Jul 7 08:53:11 [2] Extended CMOS year: 2000
Jul 7 08:53:11 [4] Fast TSC calibration using PIT
Jul 7 08:53:11 [4] Detected 2992.768 MHz processor.
Jul 7 08:53:11 [4] Console: colour VGA+ 80x25
Jul 7 08:53:11 [2] console [tty0] enabled
Jul 7 08:53:11 [2] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jul 7 08:53:11 [2] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 7 08:53:11 [2] Initializing HighMem for node 0 (000377fe:0003f6f0)
Jul 7 08:53:11 [2] Memory: 1018020k/1039296k available (1523k kernel code, 20516k reserved, 667k data, 208k init, 129992k highmem)
Jul 7 08:53:11 [2] virtual kernel memory layout:
Jul 7 08:53:11 [2] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
Jul 7 08:53:11 [2] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jul 7 08:53:11 [2] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
Jul 7 08:53:11 [2] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
Jul 7 08:53:11 [2] .init : 0xc0326000 - 0xc035a000 ( 208 kB)
Jul 7 08:53:11 [2] .data : 0xc027cfdb - 0xc0323e14 ( 667 kB)
Jul 7 08:53:11 [2] .text : 0xc0100000 - 0xc027cfdb (1523 kB)
Jul 7 08:53:11 [2] Checking if this processor honours the WP bit even in supervisor mode.Ok.
Jul 7 08:53:11 [2] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jul 7 08:53:11 [2] Calibrating delay loop (skipped), value calculated using timer frequency 5985.53 BogoMIPS (lpj=11971072)
Jul 7 08:53:11 [4] Mount-cache hash table entries: 512
Jul 7 08:53:11 [2] CPU: Trace cache: 12K uops, L1 D cache: 16K
Jul 7 08:53:11 [2] CPU: L2 cache: 2048K
Jul 7 08:53:11 [2] using mwait in idle threads.
Jul 7 08:53:11 [4] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Jul 7 08:53:11 [2] Checking 'hlt' instruction. OK.
Jul 7 08:53:11 [2] ACPI: Core revision 20090320
Jul 7 08:53:11 [2] net_namespace: 296 bytes
Jul 7 08:53:11 [2] NET: Registered protocol family 16
Jul 7 08:53:11 [2] ACPI: bus type pci registered
Jul 7 08:53:11 [3] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 10
Jul 7 08:53:11 [2] PCI: Not using MMCONFIG.
Jul 7 08:53:11 [2] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=11
Jul 7 08:53:11 [2] PCI: Using configuration type 1 for base access
Jul 7 08:53:11 [4] bio: create slab at 0
Jul 7 08:53:11 [1] ACPI: EC: Look up EC in DSDT
Jul 7 08:53:11 [2] ACPI: Interpreter enabled
Jul 7 08:53:11 [2] ACPI: (supports S0 S5)
Jul 7 08:53:11 [2] ACPI: Using IOAPIC for interrupt routing
Jul 7 08:53:11 [3] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 10
Jul 7 08:53:11 [3] PCI: MCFG area at d0000000 reserved in ACPI motherboard resources
Jul 7 08:53:11 [2] PCI: Using MMCONFIG for extended config space
Jul 7 08:53:11 [2] ACPI: No dock devices found.
Jul 7 08:53:11 [2] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 7 08:53:11 [1] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
Jul 7 08:53:11 [1] pci 0000:00:02.0: reg 14 io port: [0x1000-0x1007]
Jul 7 08:53:11 [1] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
Jul 7 08:53:11 [1] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0040000-0xf007ffff]
Jul 7 08:53:11 [1] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
Jul 7 08:53:11 [2] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Jul 7 08:53:11 [2] pci 0000:00:1b.0: PME# disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Jul 7 08:53:11 [2] pci 0000:00:1c.0: PME# disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Jul 7 08:53:11 [2] pci 0000:00:1c.1: PME# disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Jul 7 08:53:11 [2] pci 0000:00:1c.2: PME# disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Jul 7 08:53:11 [2] pci 0000:00:1c.3: PME# disabled
Jul 7 08:53:11 [1] pci 0000:00:1d.0: reg 20 io port: [0x2400-0x241f]
Jul 7 08:53:11 [1] pci 0000:00:1d.1: reg 20 io port: [0x2800-0x281f]
Jul 7 08:53:11 [1] pci 0000:00:1d.2: reg 20 io port: [0x2c00-0x2c1f]
Jul 7 08:53:11 [1] pci 0000:00:1d.3: reg 20 io port: [0x3000-0x301
Jul 7 08:53:11 [2] f]
Jul 7 08:53:11 [1] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0004000-0xf00043ff]
Jul 7 08:53:11 [2] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Jul 7 08:53:11 [2] pci 0000:00:1d.7: PME# disabled
Jul 7 08:53:11 [2] pci 0000:00:1f.0: quirk: region f000-f07f claimed by ICH6 ACPI/GPIO/TCO
Jul 7 08:53:11 [2] pci 0000:00:1f.0: quirk: region f180-f1bf claimed by ICH6 GPIO
Jul 7 08:53:11 [2] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f
Jul 7 08:53:11 [1] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
Jul 7 08:53:11 [1] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
Jul 7 08:53:11 [1] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Jul 7 08:53:11 [1] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
Jul 7 08:53:11 [1] pci 0000:00:1f.1: reg 20 io port: [0x3800-0x380f]
Jul 7 08:53:11 [1] pci 0000:00:1f.2: reg 10 io port: [0x3830-0x3837]
Jul 7 08:53:11 [1] pci 0000:00:1f.2: reg 14 io port: [0x3824-0x3827]
Jul 7 08:53:11 [1] pci 0000:00:1f.2: reg 18 io port: [0x3828-0x382f]
Jul 7 08:53:11 [1] pci 0000:00:1f.2: reg 1c io port: [0x3820-0x3823]
Jul 7 08:53:11 [1] pci 0000:00:1f.2: reg 20 io port: [0x3810-0x381f]
Jul 7 08:53:11 [2] pci 0000:00:1f.2: PME# supported from D3hot
Jul 7 08:53:11 [2] pci 0000:00:1f.2: PME# disabled
Jul 7 08:53:11 [1] pci 0000:00:1f.3: reg 20 io port: [0x3400-0x341f]
Jul 7 08:53:11 [1] pci 0000:0b:04.0: reg 10 io port: [0x4000-0x40ff]
Jul 7 08:53:11 [1] pci 0000:0b:04.0: reg 14 32bit mmio: [0xf0100000-0xf01000ff]
Jul 7 08:53:11 [1] pci 0000:0b:04.0: supports D1 D2
Jul 7 08:53:11 [2] pci 0000:0b:04.0: PME# supported from D1 D2 D3hot D3cold
Jul 7 08:53:11 [2] pci 0000:0b:04.0: PME# disabled
Jul 7 08:53:11 [2] pci 0000:00:1e.0: transparent bridge
Jul 7 08:53:11 [1] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff]
Jul 7 08:53:11 [1] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0100000-0xf01fffff]
Jul 7 08:53:11 [1] pci_bus 0000:00: on NUMA node 0
Jul 7 08:53:11 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 7 08:53:11 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
Jul 7 08:53:11 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]
Jul 7 08:53:11 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT]
Jul 7 08:53:11 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXE._PRT]
Jul 7 08:53:11 [1] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11)
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11)
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11)
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11)
Jul 7 08:53:11 [2] ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11)
Jul 7 08:53:11 [2] PCI: Using ACPI for IRQ routing
Jul 7 08:53:11 [1]
Jul 7 08:53:11 [1] printing PIC contents
Jul 7 08:53:11 [1] . PIC IMR: ffff
Jul 7 08:53:11 [1] . PIC IRR: 0c20
Jul 7 08:53:11 [1] . PIC ISR: 0000
Jul 7 08:53:11 [1] . PIC ELCR: 0e20
Jul 7 08:53:11 [4]
Jul 7 08:53:11 [1] printing local APIC contents on CPU#0/0:
Jul 7 08:53:11 [2] . APIC ID: 00000000 (0)
Jul 7 08:53:11 [2] . APIC VERSION: 00050014
Jul 7 08:53:11 [1] . APIC TASKPRI: 00000000 (00)
Jul 7 08:53:11 [1] . APIC PROCPRI: 00000000
Jul 7 08:53:11 [1] . APIC LDR: 01000000
Jul 7 08:53:11 [1] . APIC DFR: ffffffff
Jul 7 08:53:11 [1] . APIC SPIV: 000001ff
Jul 7 08:53:11 [1] . APIC ISR field:
Jul 7 08:53:11 [1] 0123456789abcdef0123456789abcdef
Jul 7 08:53:11 [1] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [1] . APIC TMR field:
Jul 7 08:53:11 [1] 0123456789abcdef0123456789abcdef
Jul 7 08:53:11 [1] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [1] . APIC IRR field:
Jul 7 08:53:11 [1] 0123456789abcdef0123456789abcdef
Jul 7 08:53:11 [1] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [4] 00000000000000000000000000000000
Jul 7 08:53:11 [1] . APIC ESR: 00000000
Jul 7 08:53:11 [1] . APIC ICR: 00000611
Jul 7 08:53:11 [1] . APIC ICR2: 01000000
Jul 7 08:53:11 [1] . APIC LVTT: 000200ef
Jul 7 08:53:11 [1] . APIC LVTPC: 00010000
Jul 7 08:53:11 [1] . APIC LVT0: 00010700
Jul 7 08:53:11 [1] . APIC LVT1: 00000400
Jul 7 08:53:11 [1] . APIC LVTERR: 000000fe
Jul 7 08:53:11 [1] . APIC TMICT: 0000c2d5
Jul 7 08:53:11 [1] . APIC TMCCT: 00006728
Jul 7 08:53:11 [1] . APIC TDCR: 00000003
Jul 7 08:53:11 [4]
Jul 7 08:53:11 [1] number of MP IRQ sources: 15.
Jul 7 08:53:11 [1] number of IO-APIC #2 registers: 24.
Jul 7 08:53:11 [2] testing the IO APIC.
Jul 7 08:53:11 [4]
Jul 7 08:53:11 [1] IO
Jul 7 08:53:11 [2] APIC #2
Jul 7 08:53:11 [1] register #00: 02000000
Jul 7 08:53:11 [1] . : physical APIC id: 02
Jul 7 08:53:11 [1] . : Delivery Type: 0
Jul 7 08:53:11 [1] . : LTS : 0
Jul 7 08:53:11 [1] register #01: 00170020
Jul 7 08:53:11 [1] . : max redirection entries: 0017
Jul 7 08:53:11 [1] . : PRQ implemented: 0
Jul 7 08:53:11 [1] . : IO APIC version: 0020
Jul 7 08:53:11 [1] IRQ redirection table:
Jul 7 08:53:11 [1] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
Jul 7 08:53:11 [1] 00 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 01 001 0 0 0 0 0 1 1 31
Jul 7 08:53:11 [1] 02 001 0 0 0 0 0 1 1 30
Jul 7 08:53:11 [1] 03 001 0 0 0 0 0 1 1 33
Jul 7 08:53:11 [1] 04 001 0 0 0 0 0 1 1 34
Jul 7 08:53:11 [1] 05 001 0 0 0 0 0 1 1 35
Jul 7 08:53:11 [1] 06 001 0 0 0 0 0 1 1 36
Jul 7 08:53:11 [1] 07 001 0 0 0 0 0 1 1 37
Jul 7 08:53:11 [1] 08 001 0 0 0 0 0 1 1 38
Jul 7 08:53:11 [1] 09 001 0 1 0 0 0 1 1 39
Jul 7 08:53:11 [1] 0a 001 0 0 0 0 0 1 1 3A
Jul 7 08:53:11 [1] 0b 001 0 0 0 0 0 1 1 3B
Jul 7 08:53:11 [1] 0c 001 0 0 0 0 0 1 1 3C
Jul 7 08:53:11 [1] 0d 001 0 0 0 0 0 1 1 3D
Jul 7 08:53:11 [1] 0e 001 0 0 0 0 0 1 1 3E
Jul 7 08:53:11 [1] 0f 001 0 0 0 0 0 1 1 3F
Jul 7 08:53:11 [1] 10 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 11 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 12 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 13 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 14 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 15 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 16 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] 17 000 1 0 0 0 0 0 0 00
Jul 7 08:53:11 [1] IRQ to pin mappings:
Jul 7 08:53:11 [1] IRQ0 -> 0:2
Jul 7 08:53:11 [1] IRQ1 -> 0:1
Jul 7 08:53:11 [1] IRQ3 -> 0:3
Jul 7 08:53:11 [1] IRQ4 -> 0:4
Jul 7 08:53:11 [1] IRQ5 -> 0:5
Jul 7 08:53:11 [1] IRQ6 -> 0:6
Jul 7 08:53:11 [1] IRQ7 -> 0:7
Jul 7 08:53:11 [1] IRQ8 -> 0:8
Jul 7 08:53:11 [1] IRQ9 -> 0:9
Jul 7 08:53:11 [1] IRQ10 -> 0:10
Jul 7 08:53:11 [1] IRQ11 -> 0:11
Jul 7 08:53:11 [1] IRQ12 -> 0:12
Jul 7 08:53:11 [1] IRQ13 -> 0:13
Jul 7 08:53:11 [1] IRQ14 -> 0:14
Jul 7 08:53:11 [1] IRQ15 -> 0:15
Jul 7 08:53:11 [2] done.
Jul 7 08:53:11 [2] pnp: PnP ACPI init
Jul 7 08:53:11 [2] ACPI: bus type pnp registered
Jul 7 08:53:11 [2] pnp: PnP ACPI: found 13 devices
Jul 7 08:53:11 [2] ACPI: ACPI bus type pnp unregistered
Jul 7 08:53:11 [2] system 00:01: ioport range 0xcb0-0xcbb has been reserved
Jul 7 08:53:11 [2] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Jul 7 08:53:11 [2] system 00:03: ioport range 0xf000-0xf07f has been reserved
Jul 7 08:53:11 [2] system 00:03: ioport range 0xf100-0xf10f has been reserved
Jul 7 08:53:11 [2] system 00:03: ioport range 0xf180-0xf1bf has been reserved
Jul 7 08:53:11 [2] system 00:03: ioport range 0x800-0x87f has been reserved
Jul 7 08:53:11 [2] system 00:03: ioport range 0xf820-0xf82f has been reserved
Jul 7 08:53:11 [2] system 00:03: ioport range 0xfe00-0xfe00 has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xfec00000-0xfecfffff has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xfee00000-0xfeefffff has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xfebfc000-0xfebfffff has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xfed13000-0xfed13fff has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xfed14000-0xfed17fff has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xfed18000-0xfed18fff has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xfed19000-0xfed19fff has been reserved
Jul 7 08:53:11 [2] system 00:03: iomem range 0xd0000000-0xdfffffff has been reserved
Jul 7 08:53:11 [2] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
Jul 7 08:53:11 [2] pci 0000:00:1c.0: IO window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.0: MEM window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.0: PREFETCH window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
Jul 7 08:53:11 [2] pci 0000:00:1c.1: IO window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.1: MEM window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.1: PREFETCH window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07
Jul 7 08:53:11 [2] pci 0000:00:1c.2: IO window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.2: MEM window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.2: PREFETCH window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09
Jul 7 08:53:11 [2] pci 0000:00:1c.3: IO window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.3: MEM window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.3: PREFETCH window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b
Jul 7 08:53:11 [2] pci 0000:00:1e.0: IO window: 0x4000-0x4fff
Jul 7 08:53:11 [2] pci 0000:00:1e.0: MEM window: 0xf0100000-0xf01fffff
Jul 7 08:53:11 [2] pci 0000:00:1e.0: PREFETCH window: disabled
Jul 7 08:53:11 [2] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jul 7 08:53:11 [1] pci 0000:00:1c.0: setting latency timer to 64
Jul 7 08:53:11 [2] pci 0000:00:1c
Jul 7 08:53:11 [2] .1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Jul 7 08:53:11 [1] pci 0000:00:1c.1: setting latency timer to 64
Jul 7 08:53:11 [2] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jul 7 08:53:11 [1] pci 0000:00:1c.2: setting latency timer to 64
Jul 7 08:53:11 [2] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Jul 7 08:53:11 [1] pci 0000:00:1c.3: setting latency timer to 64
Jul 7 08:53:11 [1] pci 0000:00:1e.0: setting latency timer to 64
Jul 7 08:53:11 [1] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Jul 7 08:53:11 [1] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Jul 7 08:53:11 [1] pci_bus 0000:0b: resource 0 io: [0x4000-0x4fff]
Jul 7 08:53:11 [1] pci_bus 0000:0b: resource 1 mem: [0xf0100000-0xf01fffff]
Jul 7 08:53:11 [1] pci_bus 0000:0b: resource 3 io: [0x00-0xffff]
Jul 7 08:53:11 [1] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffff]
Jul 7 08:53:11 [2] NET: Registered protocol family 2
Jul 7 08:53:11 [2] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 7 08:53:11 [2] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 7 08:53:11 [2] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Jul 7 08:53:11 [2] TCP: Hash tables configured (established 131072 bind 65536)
Jul 7 08:53:11 [2] TCP reno registered
Jul 7 08:53:11 [2] NET: Registered protocol family 1
Jul 7 08:53:11 [2] Trying to unpack rootfs image as initramfs.
Jul 7 08:53:11 [2] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Jul 7 08:53:11 [2] Freeing initrd memory: 8892k freed
Jul 7 08:53:11 [2] Simple Boot Flag at 0x69 set to 0x1
Jul 7 08:53:11 [4] highmem bounce pool size: 64 pages
Jul 7 08:53:11 [2] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jul 7 08:53:11 [2] msgmni has been set to 1752
Jul 7 08:53:11 [2] io scheduler noop registered (default)
Jul 7 08:53:11 [1] pci 0000:00:02.0: Boot video device
Jul 7 08:53:11 [1] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Jul 7 08:53:11 [1] pcieport-driver 0000:00:1c.1: setting latency timer to 64
Jul 7 08:53:11 [1] pcieport-driver 0000:00:1c.2: setting latency timer to 64
Jul 7 08:53:11 [1] pcieport-driver 0000:00:1c.3: setting latency timer to 64
Jul 7 08:53:11 [2] brd: module loaded
Jul 7 08:53:11 [2] loop: module loaded
Jul 7 08:53:11 [2] PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1
Jul 7 08:53:11 [4] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jul 7 08:53:11 [2] serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 7 08:53:11 [2] mice: PS/2 mouse device common for all mice
Jul 7 08:53:11 [2] cpuidle: using governor ladder
Jul 7 08:53:11 [2] TCP cubic registered
Jul 7 08:53:11 [2] RPC: Registered udp transport module.
Jul 7 08:53:11 [2] RPC: Registered tcp transport module.
Jul 7 08:53:11 [2] Using IPI Shortcut mode
Jul 7 08:53:11 [2] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jul 7 08:53:11 [3] RAMDISK: CORE3 root image found at block 0
Jul 7 08:53:11 [4] VFS: Mounted root (ext2 filesystem) on device 1:0.
Jul 7 08:53:11 [2] Freeing unused kernel memory: 208k freed
Jul 7 08:53:11 [2] Floppy drive(s): fd0 is 1.44M
Jul 7 08:53:11 [2] FDC 0 is a post-1991 82077
Jul 7 08:53:12 [2] rtc_cmos 00:05: RTC can wake from S4
Jul 7 08:53:12 [2] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Jul 7 08:53:12 [2] rtc0: alarms up to one month, y3k, 114 bytes nvram
Jul 7 08:53:13 [2] input: PC Speaker as /devices/platform/pcspkr/input/input1
Jul 7 08:53:13 [2] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jul 7 08:53:13 [2] ACPI: Power Button [PWRF]
Jul 7 08:53:13 [2] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Jul 7 08:53:13 [2] ACPI: Power Button [PWRB]
Jul 7 08:53:13 [2] processor ACPI_CPU:00: registered as cooling_device0
Jul 7 08:53:13 [2] usbcore: registered new interface driver usbfs
Jul 7 08:53:13 [2] usbcore: registered new interface driver hub
Jul 7 08:53:13 [2] usbcore: registered new device driver usb
Jul 7 08:53:13 [2] uhci_hcd: USB Universal Host Controller Interface driver
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jul 7 08:53:13 [1] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002400
Jul 7 08:53:13 [2] usb usb1: configuration #1 chosen from 1 choice
Jul 7 08:53:13 [2] hub 1-0:1.0: USB hub found
Jul 7 08:53:13 [2] hub 1-0:1.0: 2 ports detected
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Jul 7 08:53:13 [1] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002800
Jul 7 08:53:13 [2] usb usb2: configuration #1 chosen from 1 choice
Jul 7 08:53:13 [2] hub 2-0:1.0: USB hub found
Jul 7 08:53:13 [2] hub 2-0:1.0: 2 ports detected
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
Jul 7 08:53:13 [1] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00002c00
Jul 7 08:53:13 [2] usb usb3: configuration #1 chosen from 1 choice
Jul 7 08:53:13 [2] hub 3-0:1.0: USB hub found
Jul 7 08:53:13 [2] hub 3-0:1.0: 2 ports detected
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Jul 7 08:53:13 [1] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jul 7 08:53:13 [2] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00003000
Jul 7 08:53:13 [2] usb usb4: configuration #1 chosen from 1 choice
Jul 7 08:53:13 [2] hub 4-0:1.0: USB hub found
Jul 7 08:53:13 [2] hub 4-0:1.0: 2 ports detected
Jul 7 08:53:13 [2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 7 08:53:13 [4] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Jul 7 08:53:13 [2] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jul 7 08:53:13 [1] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 7 08:53:13 [2] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jul 7 08:53:13 [2] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jul 7 08:53:13 [2] ehci_hcd 0000:00:1d.7: debug port 1
Jul 7 08:53:13 [1] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
Jul 7 08:53:13 [2] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
Jul 7 08:53:13 [2] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jul 7 08:53:13 [2] usb usb5: configuration #1 chosen from 1 choice
Jul 7 08:53:13 [2] hub 5-0:1.0: USB hub found
Jul 7 08:53:13 [2] hub 5-0:1.0: 8 ports detected
Jul 7 08:53:13 [2] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jul 7 08:53:13 [2] r8169 0000:0b:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Jul 7 08:53:13 [2] r8169 0000:0b:04.0: no PCI Express capability
Jul 7 08:53:13 [2] eth0: RTL8110s at 0xf813c000, 00:30:05:e0:c3:40, XID 04000000 IRQ 19
Jul 7 08:53:13 [2] Uniform Multi-Platform E-IDE driver
Jul 7 08:53:13 [2] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03)
Jul 7 08:53:13 [2] PIIX_IDE 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jul 7 08:53:13 [2] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
Jul 7 08:53:13 [2] ide0: BM-DMA at 0x3800-0x3807
Jul 7 08:53:13 [2] ide1: BM-DMA at 0x3808-0x380f
Jul 7 08:53:13 [1] Probing IDE interface ide0.
Jul 7 08:53:14 [1] Probing IDE interface ide1.
Jul 7 08:53:14 [2] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 7 08:53:14 [2] ide1 at 0x170-0x177,0x376 on irq 15
Jul 7 08:53:14 [3] SCSI subsystem initialized
Jul 7 08:53:14 [1] libata version 3.00 loaded.
Jul 7 08:53:14 [1] ata_piix 0000:00:1f.2: version 2.13
Jul 7 08:53:14 [2] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jul 7 08:53:14 [2] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jul 7 08:53:15 [1] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 7 08:53:15 [2] scsi0 : ata_piix
Jul 7 08:53:15 [2] scsi1 : ata_piix
Jul 7 08:53:15 [2] ata1: SATA max UDMA/133 cmd 0x3830 ctl 0x3824 bmdma 0x3810 irq 18
Jul 7 08:53:15 [2] ata2: SATA max UDMA/133 cmd 0x3828 ctl 0x3820 bmdma 0x3818 irq 18
Jul 7 08:53:15 [2] ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
Jul 7 08:53:15 [2] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jul 7 08:53:15 [2] ata1.00: configured for UDMA/133
Jul 7 08:53:15 [3] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
Jul 7 08:53:15 [2] ata2.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
Jul 7 08:53:15 [2] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jul 7 08:53:15 [2] ata2.00: configured for UDMA/133
Jul 7 08:53:15 [3] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
Jul 7 08:53:16 [4] Driver 'sd' needs updating - please use bus_type methods
Jul 7 08:53:16 [3] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
Jul 7 08:53:16 [3] sd 0:0:0:0: [sda] Write Protect is off
Jul 7 08:53:16 [1] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jul 7 08:53:16 [3] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 7 08:53:16 [2] sda:
Jul 7 08:53:16 [3] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
Jul 7 08:53:16 [3] sd 1:0:0:0: [sdb] Write Protect is off
Jul 7 08:53:16 [1] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jul 7 08:53:16 [3] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 7 08:53:16 [2] sdb:
Jul 7 08:53:16 [2] sda1 sda2
Jul 7 08:53:16 [3] sd 0:0:0:0: [sda] Attached SCSI disk
Jul 7 08:53:17 [4] sdb1
Jul 7 08:53:17 [3] sd 1:0:0:0: [sdb] Attached SCSI disk
Jul 7 08:53:50 [2] r8169: eth0: link up
Jul 7 08:54:01 [2] kjournald starting. Commit interval 5 seconds
Jul 7 08:54:01 [2] EXT3 FS on sda1, internal journal
Jul 7 08:54:01 [2] EXT3-fs: mounted filesystem with writeback data mode.
Jul 7 08:54:03 [2] kjournald starting. Commit interval 5 seconds
Jul 7 08:54:03 [2] EXT3 FS on sdb1, internal journal
Jul 7 08:54:03 [2] EXT3-fs: mounted filesystem with writeback data mode.
Jul 7 08:54:30 [2] Adding 1048568k swap on /export/Disk-0/_NL_SWAP/VRAM. Priority:-1 extents:273 across:1357872k

Alan